Dodge Phoenix

Last updated

Dodge Phoenix
Dodge Phoenix 1960.JPG
1960 Dodge PD4 Phoenix
Overview
Manufacturer Chrysler Australia
Production1960–1972
Assembly Mile End, Australia
Tonsley Park, Australia
Port Melbourne, Australia
Body and chassis
Class Full-size
Body style 4-door sedan
4-door hardtop
Layout FR layout
Related Dodge Dart
Dodge 440
Plymouth Fury
Powertrain
Engine 318 cu in (5.2 L) V8
383 cu in (6.3 L) V8
Transmission 3spd automatic
Dimensions
Wheelbase (1968) 119.0 in (3023 mm) [1]
Length(1968) 213.1 in (5413 mm) [1]
Width(1968) 77.7 in (1974 mm) [1]
Chronology
Predecessor Dodge Custom Royal
Successor Chrysler by Chrysler

The Dodge Phoenix is an automobile which was produced by Chrysler Australia from 1960 to 1972.

Contents

The Phoenix was introduced in May 1960 as an Australian assembled version [2] of the American Dodge Dart, [3] positioned above the locally developed Chrysler Royal as Chrysler Australia’s luxury model. It borrowed its name from the top Dart, the Dodge Dart Phoenix, but unlike its American namesake it was offered only as a four-door sedan and only with a 318 cubic inch V8 engine. [4] All Phoenixes for Australia had right-hand drive.

The Phoenix was subsequently restyled in line with the 1961 and 1962 Dodge Dart. For 1963 the new TD2 series Phoenix was derived from the US Dodge 440, [5] and for 1965 and beyond the Phoenix was based on the Canadian Plymouth Fury III. [6] Like the 1965 Fury, the 1965 Phoenix featured vertically stacked headlamps. [3] A four-door hardtop body style joined the sedan in 1967. [4] The hardtop was fitted with a 383 cubic inch V8 engine [4] whilst the sedan continued with the smaller 318 cubic inch V8. [4] The two body styles continued to be offered until the Australian Phoenix was discontinued. [7] In addition, variants of the slightly longer U.S. station wagon were sold from the beginning for duty as hearses. Eventually, these were modified with two doors and oversized rear quarter windows, in the British hearse tradition.

Although the 1965 and later Phoenixes were basically Plymouth Furys, they did feature the North American style full size Dodge Polara instrument panel (adapted for right hand drive). They also continued to use the old-fashioned "clapper" windshield wipers (while North American models used modern parallel-action wipers).

After the Phoenix was discontinued, the Australian-developed Chrysler by Chrysler inherited the role of the top level luxury model in Chrysler Australia's model range.

Model history

PD4

The first Australian Dodge Phoenix, coded the PD4, was released in May 1960. A Canadian Dodge with a Plymouth dashboard, it was imported in CKD packs and assembled at Chrysler Australia's Mile End, South Australia Mile End facility. The PD4 Phoenix was offered only as a 4-door sedan, in two trim levels, the De Luxe and the Luxury Liner. [8] The PD4 had a 118-inch wheelbase and was powered by a 318 cubic inch OHV V8 engine. The Phoenix name was derived from the Dodge Dart Phoenix, [9] on which it was based.

RD4

The RD4 Phoenix of 1961 used the cabin section of the PD4 with new front and rear bodywork. [10] Dimensions remained unchanged, as did the mechanical specifications, [10] again being based in the North American Dodge Dart.

SD2

The SD2 of 1962 featured a shorter 116 inch wheelbase and a completely new body which was both shorter and narrower than its predecessor [10] being now based on the downsized US Dodge Dart.

TD2

The TD2 of 1963 was the first Phoenix to be based on the renamed Dodge 440 model, [10] with Dodge moving the Dart name to the new compact A-body line. The 4 door sedan body style and the 318 cubic inch engine were retained. [11]

VD2

The VD2 Phoenix was introduced in 1964. [11] The wheelbase was now 119 inches and the overall length increased by four inches to 212. [10] The VD2 was based on the 1964 North American Dodge 440.

AP2D

The AP2D Phoenix was introduced in 1965. [11] This model was a rebadged Canadian Plymouth Fury III, [10] a strategy that Chrysler Australia would continue through to the end of 1972. [10] The 1965 model featured vertically stacked four-headlight frontal styling. [10] The 318 cubic inch engine were retained. [11] A Plymouth hood ornament was used, with the Dodge "Fratzog" superimposed over the Plymouth outline.


DB6

The 1966 Phoenix was coded DB6. [11] Changes follow the 1966 Fury III; a new grille, revised rear panels, new taillights and a new bootlid. [10]

DC

The 1967 Phoenix was coded as the DC series. [12] It was the first Phoenix to be available with a choice of bodystyles, a 4-door hardtop now offered in addition to the 4 door sedan. The sedan retained the 318 cid V8 engine and while the hardtop was fitted with a 383 cid V8. In the later part of 1967 Chrysler Australia shifted Phoenix assembly from Tonsley Park to its Port Melbourne facility. [10]

DD

The 1968 Phoenix was coded DD. [12] The main changes for 1968 were new rear sheet metal and new taillights. [10] Round side marker lights were introduced, the same ones used on the North American Plymouth Fury.

DE

The DE Phoenix was introduced in 1969. [11] The new model featured horizontal dual headlights, [4] and a 120-inch wheelbase. [10] Overall length was now 214.5 inches. [10] It was marketed as the 400 Limited Edition series with each car carrying a numbered dashboard badge. [10] Production was planned to be limited to 400 sedans and 400 hardtops, although actual production did not reach 400 units of either. 371 examples of the DE were built at Chrysler Australia's Port Melbourne facility in 1969 and a further 385 in 1970. [13] For the first time, DE models featured hidden, parallel-action windshield wipers. The body was completely new and featured the Plymouth Fury "Fuselage" curved sides.

DF

The DF Phoenix was introduced in 1970. Again it was marketed as the Phoenix 400 with sedans and hardtops carrying individually numbered dash plaques. 298 were built at Port Melbourne in 1970 and 110 in 1971. [13]

DG

The DG Phoenix was introduced in 1971, again as the Phoenix 400 with individually numbered sedans and hardtops. 298 were built at Port Melbourne in 1971. [13]

DH

The DH Phoenix was introduced in 1972. [13] 73 were built at Port Melbourne in that year. [13] A decision to close the outdated Port Melbourne facility led to the discontinuation of the Phoenix. [14]

Related Research Articles

<span class="mw-page-title-main">Chrysler New Yorker</span> American automobile model (1940–1996)

The Chrysler New Yorker is an automobile model produced by Chrysler from 1940 until 1996, serving for several decades as either the brand's flagship model or as a junior sedan to the Chrysler Imperial, the latter during the years in which the Imperial name was used within the Chrysler lineup rather than as a standalone brand.

<span class="mw-page-title-main">Dodge Dart</span> Motor vehicle

The Dodge Dart is a line of passenger cars produced by Dodge from the 1959 to 1976 model years in North America, with production extended to later years in various other markets.

<span class="mw-page-title-main">Dodge Diplomat</span> Motor vehicle

The Dodge Diplomat is an American mid-size car that was produced by Dodge from 1977 to 1989. At launch, it shared a common design with the Chrysler LeBaron and for much of its later production run was the counterpart of the more upscale Chrysler Fifth Avenue and lower priced Plymouth Gran Fury. It was also sold in Mexico between 1981 and 1982 as the Dodge Dart, and in Colombia as the Dodge Coronet. The Diplomat was initially offered in a coupe and a sedan; in 1978, station wagons were added as replacements for the discontinued full-sized C-body wagons.

<span class="mw-page-title-main">Dodge Monaco</span> Motor vehicle

The Dodge Monaco is an automobile that was marketed by the Dodge division of Chrysler Corporation. Introduced as the flagship of the Dodge product line, the Monaco was introduced for the 1965 model year to replace the Custom 880, then later joined as a sub-model of the Dodge Polara. During its production, the Monaco was offered in several body configurations, including two-door and four-door hardtop sedans, four-door sedans, two-door convertibles, and station wagons.

<span class="mw-page-title-main">Dodge Coronet</span> American car model sold 1949–1959, 1965–1976

The Dodge Coronet is an automobile that was marketed by Dodge in seven generations, and shared nameplates with the same bodyshell with varying levels of equipment installed. Introduced as a full-size car in 1949, it was the division's highest trim line and moved to the lowest level starting in 1955 through 1959. The name was reintroduced on intermediate-sized models from the 1965 until 1976 model years. Muscle car versions were available starting in 1965 with the 383 and 426 wedge cu in Chrysler RB engine, followed in 1966 by the powerful 426 cu in Chrysler Hemi. Other performance models included the "Superbee", and featured, the 383 cu in Magnum, among other engine options. The nameplate "coronet" is a type of crown worn by royalty.

<span class="mw-page-title-main">Plymouth Fury</span> Motor vehicle

The Plymouth Fury is a model of automobile that was produced by Plymouth from 1955 until 1989. It was introduced for the 1956 model year as a sub-series of the Plymouth Belvedere, becoming a separate series one level above the contemporary Belvedere for 1959. The Fury was a full-size car from 1959 until 1961, then a mid-size car from 1962 until 1964, again, a full-size car from 1965 through 1974, and again, a mid-size car from 1975 through 1978. From 1975 until 1977, the Fury was sold alongside the full-size Plymouth Gran Fury. In 1978, the B-body Fury was the largest Plymouth, and by 1979, there was no large Plymouth. This product gap was filled in 1980 with the R-body Gran Fury, followed by the M-body Fury in 1982. Production of the last V8, RWD Plymouth Fury ended at the Kenosha Main assembly plant in Kenosha, WI, on December 23, 1988. Unlike its sibling brand, Dodge, Plymouth would not live to see the resurgence of the large, V8/RWD sedan.

<span class="mw-page-title-main">Plymouth Belvedere</span> Motor vehicle

The Plymouth Belvedere is a series of American automobile models made by Plymouth from 1954 until 1970.

<span class="mw-page-title-main">Plymouth Savoy</span> Motor vehicle

The Plymouth Savoy is an automobile model produced from the 1954 through 1964 model years by Plymouth.

<span class="mw-page-title-main">Dodge Kingsway</span> Car model by Dodge

The Dodge Kingsway is an automobile built by Dodge for export markets. The Kingsway name was adopted for the 1940 models. Before that, the export models based on Plymouth models had no unique model names.

<span class="mw-page-title-main">Dodge Mayfair</span> Motor vehicle

The Dodge Mayfair was an automobile built by Chrysler Corporation of Canada Ltd. This vehicle was produced solely for the Canadian market from 1953 to 1959. Its American equivalent was the Plymouth Belvedere. It was based on the Plymouth.

<span class="mw-page-title-main">Dodge Regent</span> Motor vehicle

The Dodge Regent is an automobile that was built by Dodge Canada. The low-priced line built with a front end similar to the U.S. market Dodge attached to a Plymouth body.

<span class="mw-page-title-main">Dodge St. Regis</span> Motor vehicle

The Dodge St. Regis is an automobile that was marketed by Dodge from the 1979 to 1981 model years. Replacing the Monaco, the St. Regis was the largest Dodge sedan, positioned above the mid-size Diplomat and Aspen. In contrast to both the Monaco and the Diplomat, the St. Regis was offered solely as a four-door sedan. Produced for a single generation, the St. Regis is one of the shortest-lived Dodge nameplates.

<span class="mw-page-title-main">Plymouth Satellite</span> Motor vehicle

The Plymouth Satellite is a mid-size automobile introduced in the 1965 model year as the top trim model in Plymouth's "B" platform Belvedere line. Available initially in two-door hardtop and convertible models, the Satellite remained the top-of-the-line model until the 1967 model year. A station wagon version was added and a higher "Sport" trim introduced.

<span class="mw-page-title-main">Dodge Polara</span> Motor vehicle

The Dodge Polara is an automobile introduced in the United States for the 1960 model year as Dodge's top-of-the-line full-size car. After the introduction of the Dodge Custom 880 in 1962, the Polara nameplate designated a step below the full-sized best-trimmed Dodge model; the Polara that year had been downsized to what was in effect intermediate, or mid-size status. In its various forms, the Polara name was used by Dodge until 1973, when its position in Dodge's line-up was replaced by the Dodge Monaco.

<span class="mw-page-title-main">DeSoto Firesweep</span> Motor vehicle

The DeSoto Firesweep is an automobile that was produced by DeSoto from 1957 through 1959.

<span class="mw-page-title-main">Fiat Chrysler Australia</span> Automobile manufacturer

Stellantis Pty Ltd, is the official Stellantis subsidiary in Australia and New Zealand, operating as distributor of Chrysler, Jeep, Dodge, Abarth, Alfa Romeo, Fiat and Leapmotor vehicles. However, there had previously been a "Chrysler Australia Ltd" which had operated as a vehicle manufacturer in Australia from 1951 until 1980, and was subsequently taken over by Mitsubishi Motors Australia.

The Dodge 440 is a mid-size car that was marketed by Dodge from 1962 to 1964.

<span class="mw-page-title-main">Chrysler Valiant (VH)</span> Motor vehicle

The Chrysler VH Valiant is an automobile which was produced by Chrysler Australia from June 1971 to March 1973. It replaced the VG series Valiant and was the first Valiant model to be a uniquely Australian design.

<span class="mw-page-title-main">Chrysler Valiant (VJ)</span> Motor vehicle

The Chrysler VJ Valiant is an automobile which was produced by Chrysler Australia from 1973 to 1975. It replaced the Chrysler VH Valiant and was a facelifted and revised version of that model. The VJ series Valiant was the tenth Chrysler Valiant model from Chrysler Australia.

<span class="mw-page-title-main">Chrysler Valiant (VF)</span> Motor vehicle

The Chrysler VF Valiant is an automobile that was produced in Australia by Chrysler Australia from 1969 to 1970. It was released in March 1969, replacing the Chrysler VE Valiant.

References

  1. 1 2 3 Chrysler Australia sales brochure for 1968 Dodge Phoenix
  2. Latest Dodge is Assembled here, Australian Motor Manual, 1 July 1960, page 11
  3. 1 2 The Phoenix Retrieved from allpar.com on 12 September 2008
  4. 1 2 3 4 5 Glass’s Dealer Guide, Passenger Vehicle Values, South Australian and Northern Territory Edition, June 1973, page 42
  5. Gavin Farmer, Great Ideas in Motion, 2010, page 84
  6. Gavin Farmer, Great Ideas in Motion, 2010, page 87
  7. The Macquarie Dictionary of Motoring, 1986, pages 120-121
  8. New Dodge Phoenix, Australian Motor Sports, June 1960
  9. The Big American:The Dodge Phoenix, Chapter Five, Great Ideas in Motion, 2010
  10. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Gavin Farmer, The Big American:The Dodge Phoenix, Chapter Five, Great Ideas in Motion, 2010, pages 73 to 93
  11. 1 2 3 4 5 6 Used Dodge Phoenix, www.redbook.com.au Retrieved on 28 December 2014
  12. 1 2 Dodge Phoenix, en.autowp.ru Archived 26 November 2015 at the Wayback Machine Retrieved on 28 December 2014
  13. 1 2 3 4 5 Gavin Farmer, Production from Port Melbourne, Great Ideas in Motion, 2010, page 417
  14. Gavin Farmer, Great Ideas in Motion, 2010, page 252