List of ISOLDE experimental setups | |
---|---|
COLLAPS, CRIS, EC-SLI, IDS, ISS, ISOLTRAP, LUCRECIA, Miniball, MIRACLS, SEC, VITO, WISArD | |
Other facilities | |
MEDICIS | Medical Isotopes Collected from ISOLDE |
508 | Solid State Physics Laboratory |
The Emission Channeling with Short-Lived Isotopes (EC-SLI) experiment is a permanent setup located within the ISOLDE facility and CERN. The purpose of the experiment is to study lattice locations of dopants and impurities in both single crystals and epitaxial thin films. The experiment uses short-lived isotopes from the ISOLDE on-line beamline, as well as longer-lived isotopes from three off-line beamlines. [1]
The EC-SLI experiment uses the method of emission channelling (EC) to identify the position of short-lived isotopes in a single crystal lattice. [2] Radioactive isotope probes are introduced into the crystal using ion implantation, and a positron-sensitive detector detects its decay particles. The particles that the isotope emits interact with the electrons and nuclei of the crystal's atoms, and experience channeling and blocking effects on their way out of the crystal. [3]
The yield of the emitted particles is dependent on the position of the detector relative to the crystallographic axes. Therefore, the position of the isotope within the lattice can be determined by taking measurements of electron intensity and comparing them to simulated results. [4] The emission patterns produced are characteristic of the lattice sites occupied by the isotopes, determining its functional properties (i.e. n-type or p-type doping). [5] The benefits of emission chanelling include an increase in efficiency by roughly four orders of magnitude and the study of elements lighter than the host atoms used. [6]
The experimental setup for the EC-SLI experiment is assembled on an adjustable frame structure with three sections: a beam tube and collimation chamber, experimental, and a vacuum block. It is mounted to the GHM beamline at the ISOLDE facility. [7]
The emission channelling measurements take place in a cylindrical-shaped chamber after the samples are implanted and cooled. Upon flanges inserted along the chamber's perimeter, are auxiliary devices including a cryogenic cooler, Faraday cup, view ports and a load lock. Special format flanges mount electron detector cases, links to the vacuum station, a lightening quartz lamp, the thermal shield actuator feedthrough, and goniometers, at various points around the chamber. Two rigidly aligned collimators connect to a beam transport tube, allowing the ISOLDE ion beams to be optimally transported and focused. [7]
The EC-SLI experiment has been successfully involved in determining the lattice locations of short-lived isotopes in a variety of semiconductor materials. [8] The focus of emission channeling experiments at ISOLDE are investigations into lattice locations of transition metal probes, and p-type doping using short-lived alkaline earth probes or long-lived probes. [6]
A current research aim is to continue the characterisation of quantum colour centres in diamond using the emission channeling technique, in order to correlate lattice locations with optical properties. [9]
A semiconductor is a material that is between the conductor and insulator in ability to conduct electrical current. In many cases their conducting properties may be altered in useful ways by introducing impurities ("doping") into the crystal structure. When two differently doped regions exist in the same crystal, a semiconductor junction is created. The behavior of charge carriers, which include electrons, ions, and electron holes, at these junctions is the basis of diodes, transistors, and most modern electronics. Some examples of semiconductors are silicon, germanium, gallium arsenide, and elements near the so-called "metalloid staircase" on the periodic table. After silicon, gallium arsenide is the second-most common semiconductor and is used in laser diodes, solar cells, microwave-frequency integrated circuits, and others. Silicon is a critical element for fabricating most electronic circuits.
In solid-state physics, the work function is the minimum thermodynamic work needed to remove an electron from a solid to a point in the vacuum immediately outside the solid surface. Here "immediately" means that the final electron position is far from the surface on the atomic scale, but still too close to the solid to be influenced by ambient electric fields in the vacuum. The work function is not a characteristic of a bulk material, but rather a property of the surface of the material.
Reflection high-energy electron diffraction (RHEED) is a technique used to characterize the surface of crystalline materials. RHEED systems gather information only from the surface layer of the sample, which distinguishes RHEED from other materials characterization methods that also rely on diffraction of high-energy electrons. Transmission electron microscopy, another common electron diffraction method samples mainly the bulk of the sample due to the geometry of the system, although in special cases it can provide surface information. Low-energy electron diffraction (LEED) is also surface sensitive, but LEED achieves surface sensitivity through the use of low energy electrons.
The International Muon Ionization Cooling Experiment is a high energy physics experiment at the Rutherford Appleton Laboratory. The experiment is a recognized CERN experiment (RE11). MICE is designed to demonstrate ionization cooling of muons. This is a process whereby the emittance of a beam is reduced in order to reduce the beam size, so that more muons can be accelerated in smaller aperture accelerators and with fewer focussing magnets. This might enable the construction of high intensity muon accelerators, for example for use as a Neutrino Factory or Muon Collider.
TRIUMF is Canada's national particle accelerator centre. It is considered Canada's premier physics laboratory, and consistently regarded as one of the world's leading subatomic physics research centres. Owned and operated by a consortium of universities, it is on the south campus of one of its founding members, the University of British Columbia in Vancouver, British Columbia, Canada. It houses the world's largest normal conducting cyclotron, a source of 520 MeV protons, which was named an IEEE Milestone in 2010. Its accelerator-focused activities involve particle physics, nuclear physics, nuclear medicine, materials science, and detector and accelerator development.
In semiconductor production, doping is the intentional introduction of impurities into an intrinsic (undoped) semiconductor for the purpose of modulating its electrical, optical and structural properties. The doped material is referred to as an extrinsic semiconductor.
Gamma-ray spectroscopy is the qualitative study of the energy spectra of gamma-ray sources, such as in the nuclear industry, geochemical investigation, and astrophysics. Gamma-ray spectrometry, on the other hand, is the method used to acquire a quantitative spectrum measurement.
The ISOLDE Radioactive Ion Beam Facility, is an on-line isotope separator facility located at the centre of the CERN accelerator complex on the Franco-Swiss border. Created in 1964, the ISOLDE facility started delivering radioactive ion beams (RIBs) to users in 1967. Originally located at the Synchro-Cyclotron (SC) accelerator, the facility has been upgraded several times most notably in 1992 when the whole facility was moved to be connected to CERN's ProtonSynchroton Booster (PSB). ISOLDE is currently the longest-running facility in operation at CERN, with continuous developments of the facility and its experiments keeping ISOLDE at the forefront of science with RIBs. ISOLDE benefits a wide range of physics communities with applications covering nuclear, atomic, molecular and solid-state physics, but also biophysics and astrophysics, as well as high-precision experiments looking for physics beyond the Standard Model. The facility is operated by the ISOLDE Collaboration, comprising CERN and sixteen (mostly) European countries. As of 2019, close to 1,000 experimentalists around the world are coming to ISOLDE to perform typically 50 different experiments per year.
WITCH, or experiment IS433, was a double Penning trap experiment to measure the recoil energy of decaying nuclei. A spectrometer in combination with a position-sensitive microchannel plate detector (MCP) was used to count ions while scanning their energy. The experiment was located at the ISOLDE Radioactive Ion Beam Facility in CERN. The beam from ISOLDE was bunched by REXTRAP after which it was transferred to the WITCH set-up.
Total absorption spectroscopy is a measurement technique that allows the measurement of the gamma radiation emitted in the different nuclear gamma transitions that may take place in the daughter nucleus after its unstable parent has decayed by means of the beta decay process. This technique can be used for beta decay studies related to beta feeding measurements within the full decay energy window for nuclei far from stability.
CTF3 was an electron accelerator facility built at CERN with the aim of demonstrating the key concepts of the Compact Linear Collider accelerator. The facility consisted in two electron beamlines to mimic the functionalities of the CLIC Drive Beam and Main Beam. The facility stopped its operation in December 2016, and one of its beamlines has been converted into the new CERN Linear Electron Accelerator for Research (CLEAR) facility.
Emission channeling is an experimental technique for identifying the position of short-lived radioactive atoms in the lattice of a single crystal.
The COLinear LAser SPectroscopy (COLLAPS) experiment is located in the ISOLDE facility at CERN. The purpose of the experiment is to investigate ground and isomeric state properties of exotic, short lived nuclei, including spins, electro-magnetic moments and charge radii. The experiment has been operating since the late 1970s, and is the oldest active experiment at ISOLDE.
The Collinear Resonance Ionization Spectroscopy (CRIS) experiment is located in the ISOLDE facility at CERN. The experiment aims to study ground-state properties of exotic nuclei and produce high purity isomeric beams used for decay studies. CRIS does this by using the high resolution technique of fast beam collinear laser spectroscopy, with the high efficiency technique of resonance ionization.
The ISOLDE Decay Station (IDS) is a permanent experiment located in the ISOLDE facility at CERN. The purpose of the experiment is to measure decay properties of radioactive isotopes using spectroscopy techniques for a variety of applications, including nuclear engineering and astrophysics. The experimental setup has been operational since 2014.
The high-precision mass spectrometer ISOLTRAP experiment is a permanent experimental setup located at the ISOLDE facility at CERN. The purpose of the experiment is to make precision mass measurements using the time-of-flight (ToF) detection technique. Studying nuclides and probing nuclear structure gives insight into various areas of physics, including astrophysics.
The Miniballexperiment is a gamma-ray spectroscopy setup regularly located in the ISOLDE facility at CERN, along with other locations including GSI, Cologne, PSI and RIKEN (HiCARI). Miniball is a high-resolution germanium detector array, specifically designed to work with low-intensity radioactive ion beams post-accelerated by HIE-ISOLDE, to analyse gamma radiation emitted by short-lived nuclei. Due to six-fold detector segmentation, Miniball offers a superior Doppler-correction capability with respect to conventional gamma-ray spectrometers using unsegmented detectors. The array has been used for successful Coulomb-excitation and transfer-reaction experiments with exotic beams. Results from Miniball experiments have been used to determine and probe nuclear structure.
The Underground Area 9 (UA9) experiment is a high-energy physics experiment using particle beams from the Super Proton Synchrotron (SPS), at CERN. The purpose of the experiment is to investigate how using tiny bent crystals could allow the collimation of beams in modern hadron colliders to improve. UA9 was approved in 2008, and is in-progress as of 2013.
The Versatile Ion polarisation Technique Online (VITO) experiment is a permanent experimental setup located in the ISOLDE facility at CERN, in the form of a beamline. The purpose of the beamline is to perform a wide range of studies using spin-polarised short-lived atomic nuclei. VITO uses circularly-polarised laser light to obtain polarised radioactive beams of different isotopes delivered by ISOLDE. These have already been used for weak-interaction studies, biological investigations, and more recently nuclear structure research. The beamline is located at the site of the former Ultra High Vacuum (UHV) beamline hosting ASPIC.
The Weak Interaction Studies with 32Ar Decay (WISArD) experiment is a permanent experimental setup located in the ISOLDE facility, at CERN. The purpose of the experiment is to investigate the weak interaction by looking for beta-delayed protons emitted from a nucleus. In the absence of online isotope production during Long Shutdown 2, the experimental setup has also been used to measure the shape of the beta energy spectrum. A goal of the experiment is to search for physics beyond the Standard Model (SM) by expanding the existing limits on currents in the weak interaction.