Early glassmaking in the United States

Last updated

Jamestown Glasshouse of 1608 sign.png
Jamestown

Early glassmaking in the United States began in Colonial America in 1608 at the Colony of Virginia near Jamestown, believed to be the first industrial facility in what would later become the United States. For centuries, glassmaking procedures, techniques, and recipes were kept secret, with countries actively preventing glassmaking knowledge from spreading beyond their borders. German workers with glassmaking knowledge, described as Dutchmen, along with Polish glass workers, were brought to Colonial America to begin operations. Although glass was made at Jamestown, production was soon suspended because of strife in the colony. A second attempt at Jamestown also failed.

Contents

Later attempts to produce glass were made during the 1600s; glass works in New Amsterdam and the Colony of Massachusetts Bay had some success. In the 17th century, at least two New Amsterdam glass factories may have conducted small-scale operations for several decades, while glass production at the Massachusetts glass works was short-lived. 17th and 18th century glass works were usually built near water for transportation and in proximity to wooded areas for fuel. Glassmaking increased in the 18th century, but by 1800 there were only about ten factories producing glass in the United States. Major obstacles to glassmaking in the United States were competition from imports, finding labor with glassmaking knowledge, and the difficulty of finding raw materials necessary to make the glass.

Glassmaking

Glassblower creating a hollow cylinder as the first step for window glass Window glassblower 1880s.png
Glassblower creating a hollow cylinder as the first step for window glass

Glass is made by starting with a batch of ingredients, melting it together, forming the glass product, and gradually cooling it. The batch is dominated by sand, which contains silica. Smaller quantities of other ingredients, such as soda and limestone, are also added to the batch. [1] The batch is placed inside a pot or tank that is heated by a furnace to roughly 3,090 °F (1,700 °C). [2] [Note 1] Glassmakers use the term "metal" to describe batch that has been melted together. [5] At Jamestown, sand from the James River was used for its silica, and the plentiful woods nearby provided fuel for furnaces. [6]

The melted batch, or metal, is typically shaped into the glass product (other than plate and window glass) by either glassblowing or pressing it into a mold. [7] Glass was not pressed in the United States until the 1820s. [8] Until the 20th century, window glass production involved blowing a cylinder and flattening it. [9] Two major methods to make window glass, the crown method and the cylinder method, were used until the process was changed much later in the 1920s. [10] All glass products must then be cooled gradually (annealed), or else they could easily break. [11] Annealing was originally conducted in the United States using a kiln that was sealed with the fresh glass inside, heated, and gradually cooled. [12] During the 1860s, annealing kilns were replaced with a conveyer oven, called a lehr, that was less labor intensive. [13] Until the 1760s, most glass produced in Colonial America was "green" glass, which has a greenish color and does not contain any additives to remove the greenish tint or add a more pleasing color. [14]

One major expense for glass factories is fuel for the furnace, and this often determined the location of the glass works. [15] Glassmakers originally used wood for fuel in Colonial America. Coal first began being used in the 1770s. [16] Alternative fuels such as natural gas and oil were not used in the United States until 1875. [17] Labor and transportation are also important aspects of glassmaking. [18] Glassmaking methods and recipes were kept secret, and most European countries forbid immigration to the United States by glassworkers. [19] Some skilled glassworkers were smuggled from Europe to the United States. [19] Waterways provided transportation networks before the construction of highways and railroads. [20] The first railroad in the United States was chartered in 1827, and construction began in 1828. [21]

English colonies

Jamestown

Captain John Smith FMIB 33115 Captain John Smith.jpeg
Captain John Smith

England established Jamestown in its Colony of Virginia in May 1607. [22] Slightly over one year later, an attempt was made to produce glass in the colony. [23] At the time, glassmaking back in England failed to thrive because the use of wood as fuel for glassmaking furnaces was discouraged and eventually prohibited. While England would later develop the first glassmaking furnace powered by coal, it was still in the early stages of development. [24] This fuel problem led England to become dependent on Venice and other European cities for its glass needs. In contrast, North America appeared to have a massive number of forests, having great potential for glassmaking. [23] The Virginia Company of London sent supplies to Jamestown that arrived in October 1608. Accompanying the supplies were eight men with manufacturing skills, including glassmaking. The men were said to be "Dutch" and Polish, although the Dutch men were probably German—and are identified as German by most historians. [25] [Note 2] Captain John Smith, explorer and leader of the colony, discussed the difficulties of making glass in the new colony. [28]

The site of the Jamestown glass works was described by Smith and mentioned by writer William Strachey. [29] Ruins were discovered in 1931, leading to the belief that the Jamestown glass works was located about one mile (1.6 km) from Jamestown at a place now known as Glass House Point. [30] Some structural and artifact evidence was discovered in the 1920s. [31] Although still speculative and lacking good evidence, it is theorized that bottles or beads were produced. [32] Glassmaking began shortly after the first glassworkers arrived, with the supply ship carrying sample glassware on its return voyage. [22] In the spring of 1609, a "tryall of glasse" was produced. [33] It is believed that production of glass ended during the difficult winter of 1609–1610, a period known as the Starving Time. [33] Although this attempt to produce glass cannot be called a long-term success, it can be concluded that glass was first produced in Jamestown during the Fall of 1608, the first American glass factory was located at Jamestown, and this was the first industrial production by the English in North America. [34] [Note 3]

Glassblower working Colonial Jamestown Virginia glassblower.png
Glassblower working

In 1621, plans were made to revive glassmaking at Jamestown. The plan was for beads and "drinckinge Glasse" products to be produced by four Italian men who would come to Jamestown with their families. [36] The glassworkers sailed for Jamestown in late August 1621. A glass house was constructed, but the Massacre of 1622 and sickness delayed progress. No glass had been produced by June 1622. [37] The exact location of the glass works used in 1622 is unknown, with no definitive evidence of the type of glass produced. It is known that beads were traded with the local Native Americans, so it is possible that glass beads were the intended product. [38] There is evidence that the furnace was working during March 1623, but due to issues with the quality of sand, output was said to be near zero. [39] After the winter of 1623–1624, the glass works became inactive. In April 1625 it was decided to end the glassmaking project. [40] Production failure was attributed to inadequate security, food supply, quality of sand, and disagreement among supervisors and glass workers. [41] Although glass was produced at Jamestown, longer term success did not happen in 1608 or during a second attempt in the 1620s. [23] The National Park Service exhibits the Jamestown furnace ruins at Glasshouse Point, and glassmakers in a nearby reconstructed glasshouse produce glass objects using 17th century methods. [42]

Northern colonies

The Colony of Massachusetts Bay was located north of Jamestown. There, in 1639, colonists Obadiah Holmes and Lawrence Southwick formed a partnership to start a glassmaking facility. A year later, they were joined by glassman Ananias Concklin. Together, they received funding from the town of Salem, Massachusetts, in 1641. [43] According to a Southwick family descendant, "hollow ware and bottles" were made at the glass works in "light green, dark green, blue and brown glass." [44] They also described "bulls eyes for windows and doors" that were made, which implies the Crown method was used for making window glass. [45] Some historians believe the works operated sporadically until as late as 1661, while others believe it shut down earlier in 1642 or 1643. [46]

Duycking land in New Amsterdam Duyckinck land in New Amsterdam 1638.png
Duycking land in New Amsterdam

During the 1620s, the Dutch colony in North America maintained the New Amsterdam trading post and settlement in what is now the lower part of Manhattan in New York City. [47] Everett Duijcking [Note 4] established a glassmaking facility in the colony around 1645. [48] Duijcking was a German from Westphalia, although his native town was close to the border with the Netherlands. [49] Jacob Melyer [Note 5] took over Duijcking's glass works in 1674. [48] The Melyer family is believed to have continued making glass into the third and fourth generations. If true, glass may have been produced in Manhattan from 1645 to about 1767. [50]

Johannes Smedes, [Note 6] another New Amsterdam glassmaker, received a portion of land in 1654 adjacent to what became known locally as "Glass-makers Street". [51] [Note 7] In 1664, the same year Dutch occupation ended, Smedes sold his glass works and moved to Long Island. [53] His products were believed to be window glass, bottles, and house wares. [48] Other glassmakers in the New Amsterdam–New York area included Routoff Jansen and Cornelius Dirkson, who first sharpened their skills working for Smedes. [54]

The Free Society of Traders built a glass factory close to Philadelphia in the Province of Pennsylvania during the early 1680s. The works, located at Frankford, [55] was managed by Joshua Tittery, who was also a potter. [56] They produced bottles and window panes for several years under the guidance of English glass blowers. [57] Glass making was not a productive endeavor in the Pennsylvania Colony; Tittery had more success producing pottery. [58] A 1684 letter written by Philip Lehman, secretary to William Penn, the founder of the colony, confirms the demise of the glass factory: "[The] Glasshouse comes to nothing". [59] Pressure from investors led to the abandonment of glassmaking by 1685. [60] [Note 8]

Future glassmaking

Stiegel sugar bowl, Metropolitan Museum of Art Sugar bowl MET DP207322.jpg
Stiegel sugar bowl, Metropolitan Museum of Art

Over one dozen glass works operated in the British colonies and after the American Revolution, during the 18th century, as several milestones were achieved. [62] German-immigrants Caspar Wistar, Henry William Stiegel, and John Frederick Amelung were responsible for three of these successes. In the Province of New Jersey, Wistar's glass works was the first to achieve large-scale, long-term success. [63] Stiegel's glass works in the Province of Pennsylvania was the first in America to make fine lead crystal, which is often mislabeled as flint glass. [64] Amelung invested more money in glassmaking than anyone ever had and produced impressive quality glass with engraving—although his Maryland glass works failed after 11 years. [65] Additional milestones were made with fuel. From its beginning, American glassmakers used wood as the fuel for their furnaces that melted the raw ingredients for glass. Philadelphia's Kensington Glass Works, around 1771, may have been the first American glass plant to use coal to power its furnace. [66] In the 1790s, the O'Hara and Craig glass works was the first glass works in Pittsburgh, and this works was another early user of coal as a fuel for its furnaces. [67]

By 1800, it is thought that roughly ten glass works were operating in the United States. [68] Challenges for American glass works revolved around labor, raw materials, and imports. European nations made immigration to the United States illegal for glassmakers as part of an effort to keep their glassmaking knowledge from spreading. [19] Some American businessmen resorted to smuggling glassworkers. However, the glassmakers themselves kept their techniques and recipes secret. If a company lost a skilled glassworker, it was possible that certain types of glass could no longer be made at the glass works. [69] The labor problem began to be solved in the early 19th century when Boston businessman Deming Jarves began to keep records for glass recipes and procedures. [69] The American glass manufacturers also had to compete with English glassmakers. By 1740, English glassmakers produced good quality window glass and some of the best lead crystal glassware available. English trade restrictions caused most of the glassware purchased in America before the American Revolutionary War to be English–made. [70] Raw materials for crystal glassware were also an issue. England controlled the only known supply of red lead, an ore necessary for the production of fine lead crystal glassware. This meant that American crystal cost more than that made in England because prices for red lead were kept high. [71] Jarves solved the red lead problem in the early 19th century when he developed a way to make red lead using domestic sources. [19] Finally, high quality sand was necessary to make high quality crystal glassware. England controlled the supply of high quality sand, and brought it to the United States as ballast in their ships. After the War of 1812, local sources of high quality sand were found in the Berkshires, Monongahela River, and New Jersey. [71]

Notes

Footnotes

  1. An older source states that the batch melting temperature is 2,600 °F (1,430 °C). [3] Another older source quotes a glass works spokesman as saying the furnace is heated to between 2,800 °F (1,540 °C) and 3,600 °F (1,980 °C). [4]
  2. The term that native Germans use to describe themselves is "Deutche", and this may have caused confusion between "Dutch" and "Deutche". An example of this misconception is the term "Pennsylvania Dutch", which actually refers to a group of people who came from a German-speaking region of Europe. [26] In 1916, it was thought that in the United States "nine out of ten speak of a Dutchman when a German is meant". [27]
  3. Glassmaking was conducted in Spanish colonial Mexico, in Puebla, during the 1530s. [35]
  4. Also spelled "Evert Duycking" or "Evert Duyckingk".
  5. Also spelled "Jacob Milyer".
  6. Johannes Smedes was also known as "Jan".
  7. Smedes has also been spelled as "Smeedes". [52]
  8. An older source, Knittle, calls this works the "Chester Creek Glass Works". She states that the works was built in Delaware County, managed by Tittery, and already abandoned by 1685. [61]

Citations

  1. "How Glass is Made – What is glass made of? The wonders of glass all come down to melting sand". Corning. Archived from the original on July 5, 2023. Retrieved July 5, 2023.; Shotwell 2002 , pp. 32–33
  2. "How Glass is Made – What is glass made of? The wonders of glass all come down to melting sand". Corning. Archived from the original on July 5, 2023. Retrieved July 5, 2023.
  3. United States Department of Commerce, Bureau of Foreign and Domestic Commerce 1917, p. 60
  4. Weeks & United States Census Office 1884, p. 35
  5. Shotwell 2002 , p. 343
  6. "The Dream of Exporting Glass". Jamestown Rediscovery Foundation. Archived from the original on November 9, 2023. Retrieved November 9, 2023.
  7. United States Department of Commerce, Bureau of Foreign and Domestic Commerce 1917 , p. 41-42
  8. Weeks & United States Census Office 1884 , p. 58
  9. Kutilek 2019 , pp. 37–41
  10. Shotwell 2002 , pp. 110, 124–125
  11. "Corning Museum of Glass – Annealing Glass". Corning Museum of Glass. Archived from the original on July 5, 2023. Retrieved July 5, 2023.
  12. Madarasz, Historical Society of Western Pennsylvania & Senator John Heinz Pittsburgh Regional History Center 1998 , p. 48
  13. Madarasz, Historical Society of Western Pennsylvania & Senator John Heinz Pittsburgh Regional History Center 1998 , p. 48; "Corning Museum of Glass – Lehr". Corning Museum of Glass. Archived from the original on July 5, 2023. Retrieved July 5, 2023.
  14. Purvis 1999 , p. 107; Shotwell 2002 , p. 224
  15. United States Department of Commerce, Bureau of Foreign and Domestic Commerce 1917 , pp. 12–13
  16. United States Department of Commerce, Bureau of Foreign and Domestic Commerce 1917 , p. 13
  17. Skrabec 2007 , p. 74
  18. Skrabec 2007 , pp. 96–97
  19. 1 2 3 4 Skrabec 2011 , p. 20
  20. Poor 1868 , p. 11
  21. Poor 1868 , p. 14
  22. 1 2 Hatch 1941 , p. 119
  23. 1 2 3 Lanmon & Palmer 1976 , p. 14
  24. Charleston 1978 , p. 30; Lanmon & Palmer 1976 , p. 14
  25. Hatch 1941 , p. 119; "The Dream of Exporting Glass". Jamestown Rediscovery Foundation. Archived from the original on November 9, 2023. Retrieved November 9, 2023.; "Glassmaking at Jamestown". National Park Service, U.S. Department of the Interior. Archived from the original on November 9, 2023. Retrieved November 9, 2023.; Weeks & United States Census Office 1884 , p. 77
  26. "Pennsylvania Dutch Crafts and Culture" (PDF). National Council for the Social Studies. Archived (PDF) from the original on July 15, 2023. Retrieved November 9, 2023.
  27. Baker 1913, p. 27
  28. Hatch 1941 , pp. 127–128; "Glassmaking at Jamestown". National Park Service, U.S. Department of the Interior. Archived from the original on November 9, 2023. Retrieved November 9, 2023. Smith wrote, sometimes with questionable spelling, about the difficulties of making glass in the colony. Part of his writing began with "As for the hyring of the Poles and Dutch men...", but later stated that it was useless "to send to Germany or Poleland for glasse-men...."
  29. Hatch 1941 , pp. 120–121
  30. Hatch 1941 , pp. 121–122
  31. Cotter 1958 , p. 100
  32. Hatch 1941 , p. 126
  33. 1 2 Hatch 1941 , p. 127
  34. Hatch 1941 , pp. 119–120; Tillotson 1920 , p. 354
  35. Alexander 2019, p. 89
  36. Hatch 1941 , pp. 130–131
  37. Hatch 1941 , p. 134-136
  38. Hatch 1941a , pp. 229–231
  39. Hatch 1941 , p. 137
  40. Hatch 1941a , p. 227
  41. Hatch 1941a , p. 228
  42. "Historic Jamestowne - Glassmaking at Jamestown". National Park Service, U.S. Department of the Interior. Archived from the original on November 14, 2023. Retrieved November 21, 2023.
  43. Knittle 1927 , p. 64
  44. Hunter 1914 , p. 139
  45. Hunter 1914 , p. 139; Shotwell 2002 , pp. 60, 110
  46. Knittle 1927 , p. 65; Purvis 1999 , p. 107; Hunter 1914 , p. 139
  47. Knittle 1927 , p. 67
  48. 1 2 3 Shotwell 2002 , p. 376
  49. Hunter 1914 , p. 141
  50. Knittle 1927 , p. 74
  51. Knittle 1927 , pp. 68–69
  52. Hunter 1914, p. 140
  53. Knittle 1927 , p. 69
  54. Knittle 1927 , pp. 69–70
  55. Hommel 1947 , p. 24
  56. Gillingham 1930 , p. 98
  57. Palmer 1979 , p. 104
  58. Gillingham 1930 , pp. 100–102
  59. Nash 1965 , pp. 166–167
  60. Nash 1965 , p. 168
  61. Knittle 1927, p. 75
  62. McKearin & McKearin 1966 , p. 78
  63. "Find Rum Evidence from 18th Century". Midland Journal (from Chronicling America: Historic American Newspapers. Lib. of Congress). September 10, 1920. Archived from the original on 2023-11-13. Retrieved 2023-11-13.; Zerwick 1990 , p. 71; "1989 The Wistars and their Glass 1739 – 1777". Wheaton Arts and Cultural Center. Archived from the original on November 13, 2023. Retrieved November 13, 2023.; McKearin & McKearin 1966 , p. 78; Knittle 1927 , pp. 94–95
  64. Palmer 1979 , p. 107; Hunter 1914 , p. 70; Shotwell 2002 , p. 343
  65. Zerwick 1990 , p. 72
  66. Palmer 1979 , p. 107
  67. Weeks & United States Census Office 1884 , p. 83
  68. Dyer & Gross 2001 , p. 23
  69. 1 2 Skrabec 2011 , p. 21
  70. Palmer 1976 , p. 77
  71. 1 2 Skrabec 2011 , p. 19

Bibliography

Related Research Articles

<span class="mw-page-title-main">Venetian glass</span> Glassmaking tradition from Venice, Italy

Venetian glass is glassware made in Venice, typically on the island of Murano near the city. Traditionally it is made with a soda–lime "metal" and is typically elaborately decorated, with various "hot" glass-forming techniques, as well as gilding, enamel, or engraving. Production has been concentrated on the Venetian island of Murano since the 13th century. Today Murano is known for its art glass, but it has a long history of innovations in glassmaking in addition to its artistic fame—and was Europe's major center for luxury glass from the High Middle Ages to the Italian Renaissance. During the 15th century, Murano glassmakers created cristallo—which was almost transparent and considered the finest glass in the world. Murano glassmakers also developed a white-colored glass that looked like porcelain. They later became Europe's finest makers of mirrors.

Frederick Carder was a glassmaker, glass designer, and glass artist who was active in the glass industry in both England and the United States, notably for Stevens & Williams and Steuben, respectively. Known for his experimentation with form and color, Carder's work remains popular among collectors and can be found in numerous museum collections, including The Corning Museum of Glass, which houses theFrederick Carder Gallery, Chrysler Museum of Art, and the Detroit Institute of Arts. He was born in Staffordshire, England, and died in Corning, New York, where he had made his home in 1903.

The Fostoria Glass Company was a manufacturer of pressed, blown and hand-molded glassware and tableware. It began operations in Fostoria, Ohio, on December 15, 1887, on land donated by the townspeople. The new company was formed by men from West Virginia who were experienced in the glassmaking business. They started their company in northwest Ohio to take advantage of newly discovered natural gas that was an ideal fuel for glassmaking. Numerous other businesses were also started in the area, and collectively they depleted the natural gas supply. Fuel shortages caused the company to move to Moundsville, West Virginia, in 1891.

Early American molded glass refers to glass functional and decorative objects, such as bottles and dishware, that were manufactured in the United States in the 19th century. The objects were produced by blowing molten glass into a mold, thereby causing the glass to assume the shape and pattern design of the mold. When a plunger rather than blowing is used, as became usual later, the glass is technically called pressed glass. Common blown molded tableware items bearing designs include salt dishes, sugar bowls, creamers, celery stands, decanters, and drinking glasses.

<span class="mw-page-title-main">Deming Jarves</span> American glass manufacturer

Deming Jarves (1790–1869) was a 19th-century American glass manufacturer in Massachusetts. He has been called the "father of the American glass industry". Jarves joined the glass industry in 1809 when he, with a group of investors, gained control of the window glass company Boston Crown Glass. During the War of 1812, American glass manufacturers lost access to high–quality sand and red lead, which was an essential ingredient for high–quality glass. After the war, British manufacturers began dumping low–priced glass in the United States. This caused many American glass manufacturers, including Boston Crown Glass, to go out of business. In 1818 Jarves and an investor group founded the New England Glass Company, where Jarves researched ways to produce red lead using domestic sources. By 1819 he was producing red lead, which enabled the production of better quality glass.

Novelty Glass Company of Fostoria was one of over 70 glass manufacturing companies that operated in northwest Ohio during the region's brief Gas Boom in the late 19th century. The company made bar goods, stemware, and novelties. Organization of the firm began late in 1890, with banker Rawson Crocker as president and veteran glass man Henry Crimmel as plant manager. Production started in February 1891. The plant was built on the site of the former Buttler Art Glass Company, which had been destroyed by fire in 1889.

<span class="mw-page-title-main">Hartford City Glass Company</span> American glass manufacturing company

Hartford City Glass Company was among the top three window glass manufacturers in the United States between 1890 and 1899, and continued to be one of the nation's largest after its acquisition. It was also the country's largest manufacturer of chipped glass, with capacity double that of its nearest competitor. The company's works was the first of eight glass plants that existed in Hartford City, Indiana during the Indiana Gas Boom. It became the city's largest manufacturer and employer, peaking with 600 employees.

Seneca Glass Company was a glass manufacturer that began in Fostoria, Ohio, in 1891. At one time it was the largest manufacturer of blown tumblers in the United States. The company was also known for its high-quality lead (crystal) stemware, which was hand-made for nearly a century. Customers included Eleanor Roosevelt and Lyndon B. Johnson, and retailers such as Marshall Field and Company, Neiman Marcus, and Tiffany's.

J. H. Hobbs, Brockunier and Company was one of the largest and best-known manufacturers of glass in the United States during the 19th century. Its products were distributed worldwide. The company is responsible for one of the greatest innovations in American glassmaking—an improved formula for lime glass that enabled American glass manufacturers to produce high-quality glass at a lower cost. The firm also developed talented glassmakers that started glass factories in Ohio and Indiana.

<span class="mw-page-title-main">Angelo Barovier</span> Italian artist

Angelo Barovier was an Italian glass artist. Raised in a family with a long tradition of glass working, Barovier was certainly the best-known member and significant for uniting the knowledge passed down for generations as an artist and a scientist.

The Nickel Plate Glass Company was a manufacturer of tableware, lamps, and bar goods. It began operations in Fostoria, Ohio, on August 8, 1888, on land donated by the townspeople. The new company was formed by men from West Virginia who were experienced in the glassmaking business, and their company was incorporated in that state in February of the same year. They were lured to northwest Ohio to take advantage of newly discovered natural gas that was an ideal low-cost fuel for glassmaking. The company name came from the New York, Chicago and St. Louis Railroad, commonly known as the "Nickel Plate Road", which had tracks adjacent to the new glass plant.

The Fostoria Shade and Lamp Company was the largest manufacturer of glass lamps in the United States during the early 1890s. It began operations in Fostoria, Ohio, on May 17, 1890. The plant was run by Nicholas Kopp Jr., a former chemist at Hobbs, Brockunier and Company in West Virginia. Kopp achieved fame for his many glass designs and formulas for various colors of glass, and he is the discoverer of the American formula for selenium-based ruby glass. The company's products were very popular, and it was able to make significant profits early in its existence. In addition to lamps and shades for home lighting, the company also made novelties such as salt shakers.

Mambourg Glass Company was a window glass manufacturer that began production on October 26, 1887. The company was the first of thirteen glass manufacturers located in Fostoria, Ohio, in the United States, during northwest Ohio's gas boom. The plant was managed by Leopold Mambourg, a Belgian immigrant and experienced glassmaker. Much of the company's work force was also from Belgium. Former Ohio governor Charles Foster was president of the company and a major financial backer. He was also a major investor in other businesses and two additional Fostoria window glass companies: the Calcine Glass Company and the Crocker Glass Company. Mambourg was the chief operating officer for all three of Foster's window glass companies.

The Bellaire Goblet Company was the largest manufacturer of goblets in the United States during the 1880s. Its original glass plant was located in Bellaire, Ohio, which earned the nickname "Glass City" because of its many glass factories. Bellaire Goblet Company was part of Ohio's "Glass City" on the east side of the state, and later moved to the other side of the state to participate in Northwest Ohio's "Gas Boom". It also became part of a large glass trust.

<span class="mw-page-title-main">18th century glassmaking in the United States</span>

18th century glassmaking in the United States began before the country existed. During the previous century, several attempts were made to produce glass, but none were long-lived. By 1700, it is thought that little or no glass was being produced in the British colonies that would eventually become the United States. The first American glass factory operated with long–term success was started by Caspar Wistar in 1745—although two glass works in New Amsterdam that operated in the previous century deserve honorable mention. Wistar's glass works was located in the English colony known as the Province of New Jersey. In the southeastern portion of the Province of Pennsylvania, Henry Stiegel was the first American producer of high–quality glassware known as crystal. Stiegel's first glass works began in 1763, and his better quality glassmaking began in 1769. In the United States, the first use of coal as a fuel for glassmaking furnaces is believed to have started in 1794 at a short-lived factory on the Schuylkill River near Philadelphia. In 1797 Pittsburgh's O'Hara and Craig glass works was also powered by coal, and it contributed to the eventual establishment of Pittsburgh as a leading glassmaking center in the 19th century.

<span class="mw-page-title-main">19th Century glassmaking innovations in the United States</span>

Very few 19th Century glassmaking innovations in the United States happened at the beginning of the century. Only ten glass manufacturers are thought to have been operating in 1800. High-quality glassware was imported from England, and glassmaking knowledge was kept secret. England controlled a key ingredient for producing high–quality glassware and kept its price high—making it difficult for American glass manufacturers to compete price-wise. European glassmakers with the knowledge to produce high–quality glassware were, in some cases, smuggled to the United States. Eventually the American glass industry grew, and the second half of the century saw numerous innovations.

<span class="mw-page-title-main">19th century glass categories in the United States</span>

19th century glass categories in the United States include types of glass and decoration methods for glass. A simplified category version appropriate at the beginning of the century is glassware, bottles, and windows. As the century progressed, glass production became more complex and made necessary more categories and subcategories. An 1884 United States government report used glassware, bottles, windows, and plate glass as major categories—although plate glass accounted for only four percent of the value of all glass made.

<span class="mw-page-title-main">19th century glassmaking in the United States</span>

19th century glassmaking in the United States started slowly with less than a dozen glass factories operating. Much of the nation's better quality glass was imported, and English glassmakers had a monopoly on major ingredients for high–quality glass such as good–quality sand and red lead. A tariff and the War of 1812 added to the difficulties of making crystal glass in America. After the war, English glassmakers began dumping low priced glassware in the United States, which caused some glass works to go out of business. A protective tariff and the ingenuity of Boston businessman Deming Jarves helped revive the domestic glass industry.

Bakewell, Pears and Company was Pittsburgh's best known glass manufacturer. The company was most famous for its lead crystal glass, which was often decorated by cutting or engraving. It also made window glass, bottles, and lamps. The company was one of the first American glass manufacturers to produce glass using mechanical pressing. In the 1820s and 1830s, Bakewell glassware was purchased for the White House by presidents James Monroe and Andrew Jackson. Founder Benjamin Bakewell is considered by some to be father of the crystal glassware business in the United States.

<span class="mw-page-title-main">Sulphide portrait glassware</span> Special type of glassware

Sulphide portrait glassware is blown, cut, and molded glassware usually made from lead crystal that encases an image. The image appears silver or white, as if made from silver sulphide. Although sulphide is used to describe glass decorated in this manor, the silver or white image is actually a clay paste. This glass decorating style was created in Europe during the late 18th century. In the United States, Pittsburgh glass manufacturer Bakewell, Page and Bakewell was the main manufacturer of sulphide portrait glassware in the United States during the 1820s. At that time, the ornamentation style was known as cameo–incrustation or crystallo ceramie. This type of glassware became popular again during the middle of the 19th century.