The elasticity tensor is a fourth-rank tensor describing the stress-strain relation in a linear elastic material. [1] [2] Other names are elastic modulus tensor and stiffness tensor. Common symbols include and .
The defining equation can be written as
where and are the components of the Cauchy stress tensor and infinitesimal strain tensor, and are the components of the elasticity tensor. Summation over repeated indices is implied. [note 1] This relationship can be interpreted as a generalization of Hooke's law to a 3D continuum.
A general fourth-rank tensor in 3D has 34 = 81 independent components , but the elasticity tensor has at most 21 independent components. [3] This fact follows from the symmetry of the stress and strain tensors, together with the requirement that the stress derives from an elastic energy potential. For isotropic materials, the elasticity tensor has just two independent components, which can be chosen to be the bulk modulus and shear modulus. [3]
The most general linear relation between two second-rank tensors is
where are the components of a fourth-rank tensor . [1] [note 1] The elasticity tensor is defined as for the case where and are the stress and strain tensors, respectively.
The compliance tensor is defined from the inverse stress-strain relation:
The two are related by
where is the Kronecker delta. [4] [5] [note 2]
Unless otherwise noted, this article assumes is defined from the stress-strain relation of a linear elastic material, in the limit of small strain.
For an isotropic material, simplifies to
where and are scalar functions of the material coordinates , and is the metric tensor in the reference frame of the material. [6] [7] In an orthonormal Cartesian coordinate basis, there is no distinction between upper and lower indices, and the metric tensor can be replaced with the Kronecker delta:
Substituting the first equation into the stress-strain relation and summing over repeated indices gives
where is the trace of . In this form, and can be identified with the first and second Lamé parameters. An equivalent expression is
where is the bulk modulus, and
are the components of the shear tensor .
The elasticity tensor of a cubic crystal has components
where , , and are unit vectors corresponding to the three mutually perpendicular axes of the crystal unit cell. [8] The coefficients , , and are scalars; because they are coordinate-independent, they are intrinsic material constants. Thus, a crystal with cubic symmetry is described by three independent elastic constants. [9]
In an orthonormal Cartesian coordinate basis, there is no distinction between upper and lower indices, and is the Kronecker delta, so the expression simplifies to
There are similar expressions for the components of in other crystal symmetry classes. [10] The number of independent elastic constants for several of these is given in table 1. [9]
Crystal family | Point group | Independent components |
---|---|---|
Triclinic | 21 | |
Monoclinic | 13 | |
Orthorhombic | 9 | |
Tetragonal | C4, S4, C4h | 7 |
Tetragonal | C4v, D2d, D4, D4h | 6 |
Rhombohedral | C3, S6 | 7 |
Rhombohedral | C3v, D6, D3d | 6 |
Hexagonal | 5 | |
Cubic | 3 |
The elasticity tensor has several symmetries that follow directly from its defining equation . [11] [2] The symmetry of the stress and strain tensors implies that
Usually, one also assumes that the stress derives from an elastic energy potential :
which implies
Hence, must be symmetric under interchange of the first and second pairs of indices:
The symmetries listed above reduce the number of independent components from 81 to 21. If a material has additional symmetries, then this number is further reduced. [9]
Under rotation, the components transform as
where are the covariant components in the rotated basis, and are the elements of the corresponding rotation matrix. A similar transformation rule holds for other linear transformations.
The components of generally acquire different values under a change of basis. Nevertheless, for certain types of transformations, there are specific combinations of components, called invariants, that remain unchanged. Invariants are defined with respect to a given set of transformations, formally known as a group operation. For example, an invariant with respect to the group of proper orthogonal transformations, called SO(3), is a quantity that remains constant under arbitrary 3D rotations.
possesses two linear invariants and seven quadratic invariants with respect to SO(3). [12] The linear invariants are
and the quadratic invariants are
These quantities are linearly independent, that is, none can be expressed as a linear combination of the others. They are also complete, in the sense that there are no additional independent linear or quadratic invariants. [12]
A common strategy in tensor analysis is to decompose a tensor into simpler components that can be analyzed separately. For example, the displacement gradient tensor can be decomposed as
where is a rank-0 tensor (a scalar), equal to the trace of ; is symmetric and trace-free; and is antisymmetric. [13] Component-wise,
Here and later, symmeterization and antisymmeterization are denoted by and , respectively. This decomposition is irreducible, in the sense of being invariant under rotations, and is an important tool in the conceptual development of continuum mechanics. [11]
The elasticity tensor has rank 4, and its decompositions are more complex and varied than those of a rank-2 tensor. [14] A few examples are described below.
This decomposition is obtained by symmeterization and antisymmeterization of the middle two indices:
where
A disadvantage of this decomposition is that and do not obey all original symmetries of , as they are not symmetric under interchange of the first two indices. In addition, it is not irreducible, so it is not invariant under linear transformations such as rotations. [2]
An irreducible representation can be built by considering the notion of a totally symmetric tensor, which is invariant under the interchange of any two indices. A totally symmetric tensor can be constructed from by summing over all permutations of the indices
where is the set of all permutations of the four indices. [2] Owing to the symmetries of , this sum reduces to
The difference
is an asymmetric tensor (not antisymmetric). The decomposition can be shown to be unique and irreducible with respect to . In other words, any additional symmetrization operations on or will either leave it unchanged or evaluate to zero. It is also irreducible with respect to arbitrary linear transformations, that is, the general linear group . [2] [15]
However, this decomposition is not irreducible with respect to the group of rotations SO(3). Instead, decomposes into three irreducible parts, and into two:
See Itin (2020) [15] for explicit expressions in terms of the components of .
This representation decomposes the space of elasticity tensors into a direct sum of subspaces:
with dimensions
These subspaces are each isomorphic to a harmonic tensor space . [15] [16] Here, is the space of 3D, totally symmetric, traceless tensors of rank . In particular, and correspond to , and correspond to , and corresponds to .
The stress–energy tensor, sometimes called the stress–energy–momentum tensor or the energy–momentum tensor, is a tensor physical quantity that describes the density and flux of energy and momentum in spacetime, generalizing the stress tensor of Newtonian physics. It is an attribute of matter, radiation, and non-gravitational force fields. This density and flux of energy and momentum are the sources of the gravitational field in the Einstein field equations of general relativity, just as mass density is the source of such a field in Newtonian gravity.
Noether's theorem or Noether's first theorem states that every differentiable symmetry of the action of a physical system with conservative forces has a corresponding conservation law. The theorem was proven by mathematician Emmy Noether in 1915 and published in 1918. The action of a physical system is the integral over time of a Lagrangian function, from which the system's behavior can be determined by the principle of least action. This theorem only applies to continuous and smooth symmetries over physical space.
In mathematics, especially the usage of linear algebra in mathematical physics and differential geometry, Einstein notation is a notational convention that implies summation over a set of indexed terms in a formula, thus achieving brevity. As part of mathematics it is a notational subset of Ricci calculus; however, it is often used in physics applications that do not distinguish between tangent and cotangent spaces. It was introduced to physics by Albert Einstein in 1916.
In mathematics, particularly in linear algebra, tensor analysis, and differential geometry, the Levi-Civita symbol or Levi-Civita epsilon represents a collection of numbers; defined from the sign of a permutation of the natural numbers 1, 2, ..., n, for some positive integer n. It is named after the Italian mathematician and physicist Tullio Levi-Civita. Other names include the permutation symbol, antisymmetric symbol, or alternating symbol, which refer to its antisymmetric property and definition in terms of permutations.
In physics, Hooke's law is an empirical law which states that the force needed to extend or compress a spring by some distance scales linearly with respect to that distance—that is, Fs = kx, where k is a constant factor characteristic of the spring, and x is small compared to the total possible deformation of the spring. The law is named after 17th-century British physicist Robert Hooke. He first stated the law in 1676 as a Latin anagram. He published the solution of his anagram in 1678 as: ut tensio, sic vis. Hooke states in the 1678 work that he was aware of the law since 1660.
Linear elasticity is a mathematical model of how solid objects deform and become internally stressed due to prescribed loading conditions. It is a simplification of the more general nonlinear theory of elasticity and a branch of continuum mechanics.
In classical mechanics, the Laplace–Runge–Lenz (LRL) vector is a vector used chiefly to describe the shape and orientation of the orbit of one astronomical body around another, such as a binary star or a planet revolving around a star. For two bodies interacting by Newtonian gravity, the LRL vector is a constant of motion, meaning that it is the same no matter where it is calculated on the orbit; equivalently, the LRL vector is said to be conserved. More generally, the LRL vector is conserved in all problems in which two bodies interact by a central force that varies as the inverse square of the distance between them; such problems are called Kepler problems.
A quadrupole or quadrapole is one of a sequence of configurations of things like electric charge or current, or gravitational mass that can exist in ideal form, but it is usually just part of a multipole expansion of a more complex structure reflecting various orders of complexity.
In geometry and linear algebra, a Cartesian tensor uses an orthonormal basis to represent a tensor in a Euclidean space in the form of components. Converting a tensor's components from one such basis to another is done through an orthogonal transformation.
In continuum mechanics, the Cauchy stress tensor, also called true stress tensor or simply stress tensor, completely defines the state of stress at a point inside a material in the deformed state, placement, or configuration. The second order tensor consists of nine components and relates a unit-length direction vector e to the traction vectorT(e) across an imaginary surface perpendicular to e:
Elastic energy is the mechanical potential energy stored in the configuration of a material or physical system as it is subjected to elastic deformation by work performed upon it. Elastic energy occurs when objects are impermanently compressed, stretched or generally deformed in any manner. Elasticity theory primarily develops formalisms for the mechanics of solid bodies and materials. The elastic potential energy equation is used in calculations of positions of mechanical equilibrium. The energy is potential as it will be converted into other forms of energy, such as kinetic energy and sound energy, when the object is allowed to return to its original shape (reformation) by its elasticity.
In the mathematical theory of elasticity, Saint-Venant's compatibility condition defines the relationship between the strain and a displacement field by
In mathematics and mathematical physics, raising and lowering indices are operations on tensors which change their type. Raising and lowering indices are a form of index manipulation in tensor expressions.
The acoustoelastic effect is how the sound velocities of an elastic material change if subjected to an initial static stress field. This is a non-linear effect of the constitutive relation between mechanical stress and finite strain in a material of continuous mass. In classical linear elasticity theory small deformations of most elastic materials can be described by a linear relation between the applied stress and the resulting strain. This relationship is commonly known as the generalised Hooke's law. The linear elastic theory involves second order elastic constants and yields constant longitudinal and shear sound velocities in an elastic material, not affected by an applied stress. The acoustoelastic effect on the other hand include higher order expansion of the constitutive relation between the applied stress and resulting strain, which yields longitudinal and shear sound velocities dependent of the stress state of the material. In the limit of an unstressed material the sound velocities of the linear elastic theory are reproduced.
In physics, relativistic angular momentum refers to the mathematical formalisms and physical concepts that define angular momentum in special relativity (SR) and general relativity (GR). The relativistic quantity is subtly different from the three-dimensional quantity in classical mechanics.
Ashtekar variables, which were a new canonical formalism of general relativity, raised new hopes for the canonical quantization of general relativity and eventually led to loop quantum gravity. Smolin and others independently discovered that there exists in fact a Lagrangian formulation of the theory by considering the self-dual formulation of the Tetradic Palatini action principle of general relativity. These proofs were given in terms of spinors. A purely tensorial proof of the new variables in terms of triads was given by Goldberg and in terms of tetrads by Henneaux et al.
Symmetries in quantum mechanics describe features of spacetime and particles which are unchanged under some transformation, in the context of quantum mechanics, relativistic quantum mechanics and quantum field theory, and with applications in the mathematical formulation of the standard model and condensed matter physics. In general, symmetry in physics, invariance, and conservation laws, are fundamentally important constraints for formulating physical theories and models. In practice, they are powerful methods for solving problems and predicting what can happen. While conservation laws do not always give the answer to the problem directly, they form the correct constraints and the first steps to solving a multitude of problems.
In pure and applied mathematics, quantum mechanics and computer graphics, a tensor operator generalizes the notion of operators which are scalars and vectors. A special class of these are spherical tensor operators which apply the notion of the spherical basis and spherical harmonics. The spherical basis closely relates to the description of angular momentum in quantum mechanics and spherical harmonic functions. The coordinate-free generalization of a tensor operator is known as a representation operator.
In continuum mechanics, objective stress rates are time derivatives of stress that do not depend on the frame of reference. Many constitutive equations are designed in the form of a relation between a stress-rate and a strain-rate. The mechanical response of a material should not depend on the frame of reference. In other words, material constitutive equations should be frame-indifferent (objective). If the stress and strain measures are material quantities then objectivity is automatically satisfied. However, if the quantities are spatial, then the objectivity of the stress-rate is not guaranteed even if the strain-rate is objective.
Lagrangian field theory is a formalism in classical field theory. It is the field-theoretic analogue of Lagrangian mechanics. Lagrangian mechanics is used to analyze the motion of a system of discrete particles each with a finite number of degrees of freedom. Lagrangian field theory applies to continua and fields, which have an infinite number of degrees of freedom.