Exidy Sorcerer

Last updated
Exidy Sorcerer
Exidy Sorcerer (retouch).jpg
An Exidy Sorcerer
Manufacturer Exidy
Type Home computer
Release date28 April, 1978;46 years ago (28 April, 1978)
Lifespan1978–1980
Introductory priceUS$895(equivalent to $4,200 in 2023)
CPU Zilog Z80 @ 2.106 MHz
MemoryMk I: up to 32 KB on-board RAM
Mk II: up to 48 KB on-board RAM
Display64 × 30 character display, monochrome
Soundnone (external additions possible)
Connectivity composite video, Centronics parallel, RS-232, sound in/out for cassette use, 50-pin ribbon connector including the S-100 bus
Related Tulip

The Sorcerer is a home computer system released in 1978 by the video game company Exidy, of Sunnyvale, California, and later marketed as a small business computer system under their Exidy Systems subsidiary. [1] Based on the Zilog Z80 and the general layout of the emerging S-100 standard, the Sorcerer was comparatively advanced when released, and especially when compared to the contemporary and more commercially successful Commodore PET and TRS-80. Sorcerer sales worldwide, of around 20,000 units, is comparable to the TRS-80 model II, both targeting Small or Home Business Computer users. The overall concept originated with Paul Terrell, formerly of the Byte Shop, a pioneering computer store. Coincidentally, the TRS-80 model I was designed by Steve Leininger, a former Byte Shop employee.

Contents

Lacking financial investment from its parent company, which was focused on the coin-operated arcade game market, and which, unlike Apple, did not wish to seek venture capital, the Sorcerer was sold primarily through international distributors and technology licensing agreements. Distribution agreements were made with Dick Smith Electronics in Australia and Liveport in the UK, as well as with Compudata in the Netherlands, which included a manufacturing license to build, market and distribute the Sorcerer in Europe. Compudata developed the design into the Tulip line of computers in Europe. The Sorcerer remains relatively unknown outside these markets.

After a deal with Recortec (makers of the TRS-80 clone, called variously "Video Genie" or "PMC-80") fell through in August 1980, Exidy Systems was sold to a Wall Street venture capital firm, Biotech, in summer 1981, which sold it on to Dynasty Computer Corp., Texas, in February, 1982. Dynasty made minor updates and re-branded it as the "Dynasty smart-ALEC".

History

Origins

Paul Terrell was operating RepCo in California, selling power supplies and test instruments to electronics manufacturers. A suggestion by Ed Roberts of MITS led Paul to start one of the first personal computer stores, the Byte Shop, in 1975. By 1977, the first store at El Camino Real in Mountain View, had grown into a chain of 58 stores, which Terrell then sold to John Peers of Logical Machine Corporation. [2]

Terrell, always looking for new ventures, saw a gap in the market for a small business computer that was user-friendly, affordable, came fully equipped and without the need for any assembly. At the time, the Commodore PET and Tandy TRS-80 offered the out-of-the-box experience he considered essential, yet the TRS-80 required a costly computer monitor, and both machines had low-resolution graphics capabilities. The Apple II had superior graphics and color, but required some user assembly before being operational.

Looking for a suitable name, Terrell noted "Computers are like magic to people, so let's give them computer magic with the Sorcerer computer."

Design

From his days at RepCo, Terrell knew H.R. "Pete" Kauffman and Howell Ivy of Exidy, a successful coin-operated arcade game manufacturer. Terrell noted "Their graphic designs with a computer were so good they would take quarters out of my pocket." Howell, VP of Engineering, was a computer enthusiast and was interested in Terrell's concept. From its outset, the Sorcerer design was aimed as a small business computer. The wish list of design improvements over existing designs went like this:

Launch in the US

The Sorcerer made its debut at the Long Beach Computer Show on 28 April, 1978. The standard plug-in attachments to the keyboard case (included in the base price of the unit) were a printer port for hard copy devices, cassette port for mass storage, and serial port for communications. Some of these interfaces were included with competing products and some were add-on.

The Exidy Sorcerer was competitively priced at $895 and went to market in Long Beach, California in April 1978 and generated a 4,000 unit back-log on introduction. Shipments did not start until later that summer. [3]

Successes outside the US

Export of personal computers was complicated by the requirement of US Government State Department approval but this was more than offset by the financial advantage afforded by the customary export terms of sale under letter of credit, yielding immediate cash, as compared to chasing payments from domestic retailers on 30-day credit terms. Exidy was thus keen to concentrate on international sales though recognizing the importance of its US presence for development and marketing purposes.

Exidy took this to another level by licensing production both domestically and internationally, increasing total production and market penetration without calling on cash flow. With its unique programmable character set for foreign language characters, the Exidy Sorcerer was in a league of its own. Advance royalty payments and license fees made this business a priority for Exidy, Inc.

The first Sorcerers sold in the UK were imported direct from the US by a small company based in Cornwall called Liveport Ltd. The base price was £895(equivalent to £6,500 in 2023). Liveport also eventually designed and built extra plug-in ROM-PAC cartridges and an add-on floppy disk drive (based on Micropolis units) that did not require the expensive S-100 chassis. Sorcerer sales in continental Europe were fairly strong, via their distributor, Compudata Systems. The machine had its greatest commercial success in 1979 when the Dutch broadcasting company TELEAC, in a move to be emulated later by the BBC with its BBC Micro, decided to introduce its own home computer. The Belgian company DAI was originally contracted to design the machine but they failed to deliver and Compudata delivered several thousand Sorcerers instead.

Sales in Europe were strong and, when the Dutch Government endorsed computers for small business, Compudata decided to license the Exidy design for local construction in the Netherlands with government support. After several years of Exidy production, Compudata developed their own 16-bit Intel 8088–based machine called the Tulip, replacing the Sorcerer in 1983. One of the largest computing user groups in the Netherlands was the ESGG (Exidy Sorcerer Gebruikers Groep) which published a monthly newsletter in two editions, Dutch and English. For some time, they were the largest group in the HCC (Hobby Computer Club) federation. The Dutch company De Broeders Montfort was a major firmware manufacturer.

The Sorcerer was successful in Australia as a result of strong promotion by its exclusive agent Dick Smith Electronics, though there was price resistance as it was considered beyond the means of most hobbyists. The Sorcerer Computer Users group of Australia (SCUA) actively supported the Sorcerer long after Exidy discontinued it, with RAM upgrades, speed boosts, the "80-column card", and even a replacement monitor program, SCUAMON.

Description

The Sorcerer design combined elements of the popular MITS-derived S-100 bus architecture, not yet standardised, with custom display and i/o circuitry, all housed within a custom "closed" case. The ROM-pac idea came from Howell Ivy's days at Ramtek, where he started working on arcade games before joining Exidy. The machine included the Zilog Z80 and various bus features needed to run the CP/M operating system; a port of CP/M was done by the four-man software team at Exidy led by Vic Tolomei, in consultation with Digital Research. The "closed" case featured a built-in keyboard similar to later machines like the Commodore 64, and the Atari 8-bit computers. The Sorcerer's keyboard was a high quality unit with full "throw". The keyboard included a custom "Graphics" key, which allowed easy entry of the extended character set, without having to overwork the Control key, the more common solution on other machines. Leading its peers, the Sorcerer included lower-case characters in ROM, as well as user-programmable characters stored in RAM.

Unlike most S-100 CP/M machines of its era, the Sorcerer did not have any internal expansion slots, and everything that was needed for basic computing was built-in. A standard video monitor was required for display, and optionally a standard audio cassette deck was needed for data storage. The Sorcerer included a small ROM containing a simple monitor program, written by John Borders, which allowed the machine to be controlled at the machine language level, as well as load programs from cassette tape or cartridges. The cartridges, known as "ROM PAC"s in Exidy-speak, were built by replacing the internal tape in an eight-track tape cartridge with a circuit board and edge connector to interface with the Sorcerer. These allowed the Sorcerer to run applications immediately on start-up, rather than having to load them from tape cassette like its peers.

The machine was usable without any expansion, but if the user wished to use S-100 cards they could do so with an external expansion chassis. This was plugged in via a 50-way ribbon cable to the expansion slot in the rear of the Sorcerer. The Exidy S-100 chassis is a large external cage which included a full set of S-100 slots, allowing the Sorcerer to be used as a "full" S-100 machine.

Using the same S-100 expansion slot, a user could directly attach floppy disks and boot from them into CP/M (without which the disks were not operable). A later form factor of the Sorcerer combined the floppies, and a small monitor into a single box, that resembled the TRS-80 model II. A Winchester drive was also later offered.

Graphics

Graphics on the Sorcerer were impressive, with a resolution of 512 × 240, when most machines of the era supported a maximum of 320 × 200. These lower resolutions were a side effect of the inability of the video hardware to read the screen data from RAM fast enough; given the slow speed of the machines they would end up spending all of their time driving the display. The key to building a usable system was to reduce the total amount of data, either by reducing the resolution, or by reducing the number of colors.

The Sorcerer instead chose another method entirely, which was to use definable character graphics. There were 256 characters to choose from for each screen location. The Sorcerer character set was divided into two halves: the lower half was fixed in ROM and contained the usual ASCII character set; while the upper half was defined in a dedicated region of RAM. This character RAM would be loaded with a default set of graphics from ROM at reset, but could be re-programmed and used in lieu of pixel-addressable graphics. In fact, the machine was actually drawing a 64 × 30 display (8 × 8 pixel characters) which was well within the capabilities of the hardware. However, this meant that all graphics had to lie within a checkerboard pattern on the screen, and the system was generally less flexible than machines with "real" graphics. In addition, the high resolution was well beyond the capability of the average color TV, a problem they solved by not supporting color. In this respect the Sorcerer was similar to the PET and TRS-80 in that it had only "graphics characters" to draw with. Given these limitations, the quality of the graphics on the Sorcerer was otherwise excellent. The programmable character RAM offered significant advantages, which included the ability to provide a form of animation by re-defining individual character bitmaps at runtime. Clever use of several characters for each graphic allowed programmers to create smooth motion on the screen, regardless of the character-cell boundaries.

Sound

A more surprising limitation, given the machine's genesis, is the lack of sound output. Enterprising developers standardized on use of two pins of the parallel port, to which users were expected to attach a speaker.

Software

A Standard BASIC cartridge was included with the machine. This cartridge was essentially the common Microsoft BASIC already widely used in the CP/M world. One modification was the addition of single-stroke replacements for common BASIC commands, pressing GRAPHICS-P would insert the word PRINT for instance, allowing for higher-speed entry. The machine included sound in/out ports on the back that could be attached to a cassette tape recorder, so BASIC could load and save programs to tape without needing a disk drive. An Extended BASIC cartridge requiring 16 KB was also advertised, but it is unclear if this was actually available; Extended BASIC from Microsoft was available on cassette. Another popular cartridge was the Word Processor PAC which contained a version of the early word processor program Spellbinder.

The Montfort Brothers made an EPROM PAC with a rechargeable battery inside and 16 KB RAM with an external write-protect switch. Thus bootable software could be uploaded to the pack and kept for a longer period.

RAM expansion

Many CP/M machines were designed to allow the full 16-bit address space of 64 KB to be populated by memory. This was problematic on the Exidy Sorcerer. 32 KB could easily be populated. Another 16 KB was the ROM cartridge address space. This could be populated, but required disabling the ROM cartridge capability. The last 16 KB was required by the system for I/O, particularly for the video, and would have required extensive system modification.

Exidy Systems

After the deal to sell the Exidy Data System Division to Recortec fell through in August 1980, Exidy Systems was incorporated in January 1981, with the express purpose to sell the Sorcerer design rights and business unit off.

Terrell continued to evolve system designs that would grow with small business-users. The System 80 Desktop Computer of 1981 combined the Sorcerer with a 12" display, dot matrix printer and business software, for which the contemporary benchmark was perhaps the Xerox Diablo 3100. This was followed by the Multi-Net 80 also in 1981, using multiple Winchester disk drives, a centralised "timeshare global module" running MP/M and CP/NET, to which up to 16 Sorcerers with a Terminal ROM-pac inserted could inter-connect. These were early networked systems, although it is not clear if any of these were ever sold. This is the timeframe when Exidy Systems was sold to Biotech. Terrell departed Exidy Systems in January 1982.

Related Research Articles

<span class="mw-page-title-main">Aster CT-80</span> 1982 personal computer

The Aster CT-80 is a 1982 personal computer developed by the small Dutch company MCP, was sold in its first incarnation as a kit for hobbyists. Later it was sold ready to use. It consisted of several Eurocard PCB's with DIN 41612 connectors, and a backplane all based on a 19-inch rack configuration. It was the first commercially available Dutch personal/home computer. The Aster computer could use the software written for the popular Tandy TRS-80 computer while fixing many of the problems of that computer, but it could also run CP/M software, with a large amount of free memory Transient Program Area, (TPA) and a full 80×25 display, and it could be used as a Videotext terminal. Although the Aster was a clone of the TRS-80 Model I it was in fact more compatible with the TRS-80 Model III and ran all the software of these systems including games. It also had a built-in speaker which was compatible with such games software.

<span class="mw-page-title-main">Amstrad CPC</span> Home computers produced by Amstrad

The Amstrad CPC is a series of 8-bit home computers produced by Amstrad between 1984 and 1990. It was designed to compete in the mid-1980s home computer market dominated by the Commodore 64 and the ZX Spectrum, where it successfully established itself primarily in the United Kingdom, France, Spain, and the German-speaking parts of Europe.

<span class="mw-page-title-main">Commodore 64</span> 8-bit home computer introduced in 1982

The Commodore 64, also known as the C64, is an 8-bit home computer introduced in January 1982 by Commodore International. It has been listed in the Guinness World Records as the highest-selling single computer model of all time, with independent estimates placing the number sold between 12.5 and 17 million units. Volume production started in early 1982, marketing in August for US$595. Preceded by the VIC-20 and Commodore PET, the C64 took its name from its 64 kilobytes(65,536 bytes) of RAM. With support for multicolor sprites and a custom chip for waveform generation, the C64 could create superior visuals and audio compared to systems without such custom hardware.

<span class="mw-page-title-main">TRS-80</span> 1977 microcomputer by Tandy Corporation

The TRS-80 Micro Computer System is a desktop microcomputer developed by American company Tandy Corporation and was sold through their Radio Shack stores. Launched in 1977, it is one of the earliest mass-produced and mass-marketed retail home computers. The name is an abbreviation of Tandy Radio Shack, Z80 [microprocessor], referring to its Zilog Z80 8-bit microprocessor.

<span class="mw-page-title-main">TRS-80 Color Computer</span> Line of home computers

The RadioShack TRS-80 Color Computer, later marketed as the Tandy Color Computer, is a series of home computers developed and sold by Tandy Corporation. Despite sharing a name with the earlier TRS-80, the Color Computer is a completely different system and a radical departure in design based on the Motorola 6809E processor rather than the Zilog Z80 of earlier models.

<span class="mw-page-title-main">Atari 8-bit computers</span> 1979-1991 home computer series

The Atari 8-bit computers, formally launched as the Atari Home Computer System, are a series of home computers introduced by Atari, Inc., in 1979 with the Atari 400 and Atari 800. The architecture is designed around the 8-bit MOS Technology 6502 CPU and three custom coprocessors which provide support for sprites, smooth multidirectional scrolling, four channels of audio, and other features. The graphics and sound are more advanced than most of its contemporaries, and video games are a key part of the software library. The 1980 first-person space combat simulator Star Raiders is considered the platform's killer app.

<span class="mw-page-title-main">Commodore 128</span> Home computer released in 1985

The Commodore 128, also known as the C128, C-128, or C= 128, is the last 8-bit home computer that was commercially released by Commodore Business Machines (CBM). Introduced in January 1985 at the CES in Las Vegas, it appeared three years after its predecessor, the Commodore 64, the bestselling computer of the 1980s. Approximately 2.5 million C128s were sold during its four year production run.

<span class="mw-page-title-main">VIC-20</span> 1981 home computer by Commodore

The VIC-20 is an 8-bit home computer that was sold by Commodore Business Machines. The VIC-20 was announced in 1980, roughly three years after Commodore's first personal computer, the PET. The VIC-20 was the first computer of any description to sell one million units, eventually reaching 2.5 million. It was described as "one of the first anti-spectatorial, non-esoteric computers by design...no longer relegated to hobbyist/enthusiasts or those with money, the computer Commodore developed was the computer of the future."

<span class="mw-page-title-main">Commodore PET</span> Personal computer system

The Commodore PET is a line of personal computers produced starting in 1977 by Commodore International. A single all-in-one case combines a MOS Technology 6502 microprocessor, Commodore BASIC in read-only memory, keyboard, monochrome monitor, and, in early models, a cassette deck.

<span class="mw-page-title-main">TI-99/4A</span> Home computer by Texas Instruments

The TI-99/4 and TI-99/4A are home computers released by Texas Instruments in 1979 and 1981, respectively. Based on Texas Instruments's own TMS9900 microprocessor originally used in minicomputers, the TI-99/4 was the first 16-bit home computer. The associated TMS9918 video display controller provides color graphics and sprite support which were only comparable with those of the Atari 400 and 800 released a month later. The TI-99 series also initially competed with the Apple II and TRS-80.

<span class="mw-page-title-main">Commodore Plus/4</span> 1984 home computer by Commodore International

The Commodore Plus/4 is a home computer released by Commodore International in 1984. The "Plus/4" name refers to the four-application ROM-resident office suite ; it was billed as "the productivity computer with software built in".

<span class="mw-page-title-main">VTech Laser 200</span> 8-bit home computer released in 1983

The VTech Laser 200 is an 8-bit home computer from 1983, also sold as the Salora Fellow, the Seltron 200 in Hungary & Italy, the Smart-Alec Jr. by Dynasty Computer Corporation in Dallas, Texas for the USA, the Texet TX8000A, the Dick Smith VZ 200, and the VTech VZ 200.

<span class="mw-page-title-main">TRS-80 Model 100</span> Portable computer introduced in 1983

The TRS-80 Model 100 is a notebook-sized portable computer introduced in April 1983.

<span class="mw-page-title-main">Colour Genie</span> A computer produced by Hong Kong-based manufacturer EACA in 1982.

The EACA EG2000 Colour Genie was a computer produced by Hong Kong–based manufacturer EACA, and introduced in Germany in August 1982 by Trommeschläger Computer Service and Schmidtke Electronic.

<span class="mw-page-title-main">Paul Terrell</span> American businessman

Paul Terrell is an American businessman. In December 1975, he founded Byte Shop, the first personal computer retailer shop. He helped popularize personal computing to the hobbyist and home computing markets, and was the first retailer to sell an Apple Computer, the Apple I.

<span class="mw-page-title-main">Prológica CP-400</span> 8-bit home computer produced in Brazil

The CP 400 COLOR was launched in 1984 by Prológica, a Brazilian company which made clone versions of various computers, under the general designation of "CP".

<span class="mw-page-title-main">Tulip System-1</span> A 16-bit personal computer based on the Intel 8086 and made by Tulip Computers

The Tulip System I is a 16-bit personal computer based on the Intel 8086 and made by Tulip Computers, formerly an import company for the Exidy Sorcerer, called Compudata Systems.

<span class="mw-page-title-main">LINK 480Z</span> 8-bit microcomputer

The LINK 480Z was an 8-bit microcomputer produced by Research Machines Limited in Oxford, England, during the early 1980s.

<span class="mw-page-title-main">TRS-80 Model II</span> Tandy Radio Shack small-business computer launched in 1979

The TRS-80 Model II is a computer system launched by Tandy in October 1979, and targeted at the small-business market. It is not an upgrade of the original TRS-80 Model I, but a new system.

<span class="mw-page-title-main">Home computer</span> Class of microcomputers

Home computers were a class of microcomputers that entered the market in 1977 and became common during the 1980s. They were marketed to consumers as affordable and accessible computers that, for the first time, were intended for the use of a single, non-technical user. These computers were a distinct market segment that typically cost much less than business, scientific, or engineering-oriented computers of the time, such as those running CP/M or the IBM PC, and were generally less powerful in terms of memory and expandability. However, a home computer often had better graphics and sound than contemporary business computers. Their most common uses were word processing, playing video games, and programming.

References

  1. ↑ Staff writer (March 30, 1981). "Exidy Forms Subsidiary Company". InfoWorld. 3 (6). CW Communications: 3 – via Google Books.
  2. ↑ "The Byte Shop organization has been purchased by John Peers of Logical Machine Corporation". Interface Age. Vol. 2. 1977. p. 26.
  3. ↑ Ken Barbier, "The Boredom Destroyer: Exidy's Sorcerer", Creative Computing, January 1979
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.