CT series | |
---|---|
General information | |
Type | Microlight/Ultralight |
Manufacturer | Flight Design |
Designer | Matthias Betsch |
Status | In production |
Number built | 900+ |
History | |
Manufactured | 1997–present |
Introduction date | 1997 |
First flight | March 1996 |
Variants | Flight Design MC |
The Flight Design CT series is a family of high-wing, tricycle undercarriage, two seat, ultralight and light-sport aircraft produced by Flight Design (Flightdesign Vertrieb) of Germany. The family includes the original CT and the CT2K, CTSW, CTLS and the MC models. [1]
The maiden flight of the original CT model was performed in March 1996, quantity production of the type commenced during the following year at Flight Design's facility in Ukraine. Since its introduction, numerous variants of the CT series have been introduced, a total of 400 aircraft were reportedly in use worldwide by 2005. During 2015, in response to rising demand for the type, Flight Design opted to construct a new manufacturing facility in China to produce the type.
The development of the CT series commenced during the mid-1990s, with work on the programme starting only a few years after the founding of Flight Design in 1993. [2] Prior to the CT series, the firm specialised in the design and production of light aircraft, such as hang gliders and powered microlights. The original model, the CT, was specifically designed for the ultralight-microlight (UL-ML) market, and was certified as such by the EASA, enabling the type's sale throughout the European market. While the manufacturer itself is headquartered in Stuttgart, Germany, the company decided early on to locate the CT's production line in Ukraine. [2] In 1997, the same year in which quantity production of the CT series commenced, Flight Design opted to cease manufacture of its other product ranges in favour of concentrating its resources on its newly-launched aircraft. [2]
During the late 1990s and 2000s, numerous variants of the original CT were introduced, turning the type into a family of lightweight aircraft. [2] By 2005, both the improved CT-2K and the CT-SW (the latter featuring a shortened wing), had been launched. During April 2005, the CT-SW was approved by the FAA under a light-sport aircraft (LSA) certification, enabling the type to enter the lucrative North American market. [2] At this point, all aircraft for this market were being imported in a partially-complete state and assembled by the American light aircraft manufacturer Flightstar Sportplanes prior to sale. [3] The type is capable of use within Germany's UL-ML category, albeit requiring a reduction in fuel load and the mandatory installation of a Ballistic Recovery Systems (BRS) parachute.[ citation needed ] By mid-2005, a total of 400 CT series aircraft had been sold worldwide according to Flight Design, resulting in a production backlog of roughly one year while production of the type proceeded at a reported rate of ten aircraft per month. [2]
By 2011, the CT series had been cleared for flight under the microlight/ultralight regulations of numerous countries, including the FAA's LSA rules, Canadian advanced ultralight [1] and the European EASA Permit to Fly rules. [4] During December 2009, the CTLS was granted a type design approval and a production certificate by the Civil Aviation Administration of China; [5] six years later, a CTLS production plant was constructed in China. [6]
The CT series was designed for the principal roles of recreational flying, touring and towing; other roles envisaged for the aircraft include light reconnaissance and surveillance. [2] It is reportedly due to these secondary roles that much of the aircraft's configuration was selected, such as its high-mounted wing, relatively large windows and detachable doors; the latter feature provides unrestricted views for downward-pointing cameras. Further aspects of the design that improve the pilot's field of view include the aircraft's sizable overhead skylight that reduces the typical blindspot incurred by a high-mounted wing. [2] The pod-shaped cockpit is relatively spacious even for a crew of two. [3]
The wing comprises a symmetrical aerofoil and cantilever construction, which was designed in-house by Flight Design. [2] It has an aspect ratio is akin to that of a glider, and is equipped with relatively oversized flaps to generate a high level of lift when required, as well as a pair of integral wing tanks to house all of the aircraft's fuel. [3] The CT series features an all-composite construction, the primary material being carbon fiber mixed with Kevlar, the latter being added for strengthening. [2] The use of composites has been attributed with enabling the use of a highly aerodynamically shaped fuselage, in addition to a relatively high useful payload capacity (almost equal to the weight of the aircraft itself). [1] Furthermore, by using composites over a metal approach results in higher costs both to manufacture and repair while providing superior strength and crash-resistance. [2]
All of the CT series are powered by either a single 80 hp (60 kW) Rotax 912UL or 100 hp (75 kW) Rotax 912ULS engine, which is installed in a conventional tractor configuration. [4] Typically, the engine drives a three-bladed fixed-pitch propeller, as well as a single generator for powering onboard electrical apparatus. [2] Electrical systems include the flight instrumentation, VHF radio, a transponder, GPS navigation system, and the electrically-actuated flaps, the latter having five positions to select for cruise, take-off, and landing. The instrumentation panel features four standard flight instruments, while additional indicators can be optionally installed at the customer's request. [2] Climate control of cockpit is achieved via ducted engine air for heating while louvers provide both cooling and ventilation. [2]
The flight controls are connected via rods to the ailerons and all-moving horizontal stabiliser, while the rudder is actuated via cables. [2] All three control surfaces can be trimmed via manually-operated trim wheels located on the console. Aerospace periodical Flight International has described the CT series as possessing good control characteristics, noting its particularly favourable qualities across aspects such as control response, mechanical characteristics, and harmonisation. [2] One reviewer of the CT2K writing COPA Flight in October 2004 described the aircraft as "fast, comfortable, roomy and very capable of long cross country flights for little money" and faulted the aircraft only for its difficulty slowing down from its cruise speed of 130 knots to its final approach speed of 50 knots, requiring careful planning to lose 80 knots between entering the circuit and stabilizing the aircraft on final approach. [1]
Although the standard and required equipment varies by country, the CTSW features a standard Ballistic Recovery Systems (BRS) parachute. The BRS can be used to lower the entire aircraft to the ground via a controlled descent in the event of major structural failure, incapacitation of the pilot, or engine failure over mountainous terrain. [7] The recovery parachute is operated via a handle installed on the rear cabin wall, which is also linked to a fuselage-mounted emergency location transmitter to further aid in recovery efforts. [2] Another novel feature, which is only present on some variants such as the CT-SW model, is a relatively simplistic “wing-levelling” autopilot; use of this system enables the pilot to conduct limited hands-free/head-in cockpit tasks. [2]
During 2007, a single example was used by the Indian Air Force to conduct an around-the-world expedition. [8] Wing Commander Rahul Monga started off on 1 June 2007 and finished the circumnavigation flight on 19 August 2007; a cumulative flight time of 247 hours was logged for the journey. [9]
During 2010, the Air Volunteer Fire Department in Bomberos de Cuenca, Ecuador took delivery of a CTLS for use as an air support unit for fire fighting reconnaissance. The aircraft is based at Mariscal La Mar airport, 8,300 feet above sea level. [10]
By June 2012, there were 344 CT series aircraft registered in the United States, along with a further 76 in the United Kingdom and 18 in Canada . [11] [12] [13]
Data from Flight Design [28] [29]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
Flight Design General Aviation GmbH is a German aircraft design company and aircraft manufacturer, formerly based in Leinfelden-Echterdingen and Kamenz and now in Eisenach.
The Rotax 912 is a horizontally-opposed four-cylinder, naturally-aspirated, four-stroke aircraft engine with a reduction gearbox. It features liquid-cooled cylinder heads and air-cooled cylinders. Originally equipped with carburetors, later versions are fuel injected. Dominating the market for small aircraft and kitplanes, Rotax produced its 50,000th 912-series engine in 2014. Originally available only for light sport aircraft, ultralight aircraft, autogyros and drones, the 912-series engine was approved for certified aircraft in 1995.
The CSA SportCruiser is a two-seat, single engine, tricycle undercarriage, fixed-wing aircraft that was introduced in 2006 by Czech Aircraft Works (CZAW), now named Czech Sport Aircraft.
The Fantasy Air Allegro is a Czech two seat, high wing, tricycle gear, single engine monoplane light-sport aircraft or microlight originally designed and built by Fantasy Air and later produced in the United States by Allegro LSA.
The SportStar and EuroStar are a family of a two-seat, light sport aircraft (LSA), manufactured by Evektor-Aerotechnik of Czechia and powered by a Rotax 912ULS 100 horsepower (75 kW) engine.
The Remos G3 Mirage and Remos GX are German high wing, two seat, single engine light aircraft, built by Remos AG of Pasewalk. The aircraft is supplied as a kit for amateur construction or complete and ready-to-fly.
The Pipistrel Virus is a two-seat, single engine light aircraft manufactured by Pipistrel in Slovenia and Italy and sold as an ultralight, homebuilt kit, or light-sport aircraft.
The Denney Kitfox is a series of small side-by-side, two-seat, high-wing, single engine kit aircraft, designed and originally manufactured by Dan Denney and his company Denney Aerocraft of Boise, Idaho. The aircraft is amateur-built and not type-certified. Over 4500 kits have been delivered in 42 countries.
The Flight Design MC is a German light-sport aircraft, designed and produced by Flight Design, introduced at AirVenture in 2008. The aircraft is supplied as a complete ready-to-fly-aircraft.
The BRM Aero Bristell NG 5, now called the Bristell Classic, is a Czech low-wing, two-seat in side-by-side configuration, single engine in tractor configuration, ultralight and light-sport aircraft that was designed by Milan Bristela and is produced by BRM Aero. The aircraft is supplied as a complete ready-to-fly aircraft.
The Pegasus Quantum is a British two-seat, ultralight trike that was designed and produced by Pegasus Aviation and later by P&M Aviation. The aircraft was supplied as a completed aircraft.
The Aerospool WT9 Dynamic is a Slovak ultralight and light-sport aircraft, designed and produced by Aerospool of Prievidza. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Fly Synthesis Syncro is an Italian ultralight and light-sport aircraft, designed and produced by Fly Synthesis, introduced at the Aero show held in Friedrichshafen in 2009. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Zlin Savage is a series of light sport aircraft similar in construction to the Piper Cub manufactured by the Zlin Aircraft Company of Zlín, Czech Republic.
The ScaleWings SW51 Mustang, formerly marketed as the FK-Lightplanes FK51 Mustang, is an Austrian ultralight, light-sport aircraft and homebuilt aircraft that was designed by ScaleWings of Strasswalchen, Austria and was initially produced by FK-Lightplanes of Krosno, Poland, who introduced it publicly at the AERO Friedrichshafen show in 2013. After FK-Lightplanes ceased production, the design was built by ScaleWings.
The Blackwing Sweden Blackwing is a Swedish ultralight and light-sport aircraft designed and produced by Blackwing Sweden of Lund, introduced at the AERO Friedrichshafen show in 2015. The aircraft is supplied as a kit for amateur construction or complete and ready-to-fly.
The Direct Fly ArGO is a Czech ultralight and light-sport aircraft, designed and produced by Direct Fly sro of Hluk, introduced at the Blois fly-in show in France, in 2011. When it was available the aircraft was supplied complete and ready-to-fly.
The Rokospol Via is a Czech ultralight and light-sport aircraft (LSA), designed and produced by Rokospol Aviation of Prague, introduced at the Prague airshow in 2008. The aircraft is supplied complete and ready-to-fly.
The Tecnam Snap is an Italian aerobatic ultralight aircraft, designed by Fabio Russo and produced by Tecnam of Casoria, Metropolitan City of Naples, introduced at the AERO Friedrichshafen show in 2013. The aircraft was intended to be supplied complete and ready-to-fly.
The Tecnam P-Mentor is an Italian light aircraft, intended for flight training, designed and produced by Tecnam of Casoria. It was introduced in April 2022 and is EASA CS-23 type certified in Europe.