Formic acid fuel cell

Last updated

Formic acid fuel cells (direct formic acid fuel cells or DFAFCs) are a subcategory of direct liquid-feed fuel cells (DLFCs), in which the liquid fuel is directly oxidized (electrochemically) at the anode instead of reforming to produce hydrogen. Formic acid-based fuel cells represent a promising energy supply system in terms of high volumetric energy density, theoretical energy efficiency, and theoretical open-circuit voltage. They are also able to overcome certain problems inherent to traditional hydrogen (H2) feed fuel cells such as safe handling, storage, and H2 transportation.

Contents

There are 3 main types of DFAFCs:

The feeding of fuels and air into a cell increases its energy output, at the cost of price and size/portability. [1]

Today, the main applications of DFAFCs include small, portable electronics, medical diagnostic devices, as well as larger fixed power applications and electric vehicles.

Fuel sourcing

FA is commonly produced by reacting CO with methanol in the presence of a strong base, followed by methyl formate hydrolysis, hydrolysis of formamide, and acidolysis of formate salts. However, FA can also be sustainably produced from the direct electroreduction of CO2, which neutralizes the impacts of the production of CO2 from the fuel cell itself, reducing the environmental impact. The reactions are as follows:

CO2 + 2H+ + 2e- → HCOO+ (in acidic environment)

CO2 + 2H+ + 2e- → HCOOH (in neutral/alkaline environment) [1]

DFAFC comparison to other energy sources

While several fuels were tried for DLFC, formic acid (FA) has received the most interest due to its useful characteristics, such as high volumetric energy density (53g H2/L [2] ), open circuit voltage (1.48 V [3] ), high theoretical energy efficiency (58% [2] ). In addition, the storage of formic acid is easier and safer than that of pure hydrogen, and FA does not need to be kept at high pressures and/or low temperatures.

Similar to methanol, FA is a small organic molecule fed directly into the fuel cell, which removes the need for complicated catalytic reforming. However, compared to methanol, it has lower toxicity, better oxidation kinetics, and higher fuel cell efficiency, since formic acid does not cross over the polymer membrane. [4] Because of its low cross over tendency, FA can be used at higher concentrations than methanol, mitigating the drawback of the lower volumetric energy density (4.4 kWh/dm3 vs 2.13 kWh/dm3). [5]

A comparison of DFAFC with pure hydrogen cells, methanol cells, and gasoline for several characteristics is reported in the table below:

FuelPrice (US$/kg)Energy Density (kWh/dm3)Operating Temperature (°C)Storage Pressure (bar)
FA0.72.13 [6] 20 - 60 (DFAFC) [7]
H22.6 - 5.1 [8] 0.53 [9] 150 - 200 (AFC) [10] 700 [11]
Methanol0.2 - 0.4 [12] 4.4 - 4.9 [5] 30 - 90 (DMFC) [13]
Gasoline2.5 - 3.5 (US$/Gallon)13 [14]

FA safety concerns

Formic acid in 85% concentration is flammable, and diluted formic acid is on the U.S. Food and Drug Administration list of food additives. The principal danger from formic acid is from skin or eye contact with the concentrated liquid or vapors. [4]

Reactions

DFAFCs convert formic acid and oxygen into carbon dioxide and water to produce energy. Formic acid oxidation occurs at the anode on a catalyst layer. Carbon dioxide is formed and protons (H+) are passed through the polymer membrane to react with oxygen on a catalyst layer located at the cathode. Electrons are passed through an external circuit from anode to cathode to provide power to an external device.

The direct anode, cathode, and net reactions of DFAFC are reported below: [1]

Anode: HCOOH → CO2 + 2 H+ + 2 e−
E0 = -0.25V (vs SHE)
Cathode: 1/2O2 + 2 H+ + 2 e− → H2O
E0 = 1.23V (vs SHE)
Net reaction: HCOOH + 1/2 O2 → CO2 + H2O
E0 = 1.48V (vs SHE)

Alternative reactive pathways

While the mechanism of reaction reported in the above section is commonly used for simple explicative purposes, the chemical pathways are actually more complicated, and are at the center of most of the research on DFAFCs to optimize their efficiency. The detrimental effect and poisoning caused by certain pathways can be mitigated by the use of catalysts with proper shape and morphology, such as Pt and/or Pt alloys. [4]

Cathode

The oxygen reduction reaction (ORR) occurring at the cathode has been investigated. It can occur via two different pathways: one involving the transfer of four electrons and the other two. The former results in the formation of water (H2O), while the latter generates hydrogen peroxide (H2O2). Hydrogen peroxide radicals have deleterious effects on the membrane separator, and therefore its formation should be tentatively avoided. [4]

Anode

The mechanism for formic acid electrooxidation (FAEO) at the anode has been investigated for almost half a century without resolution. While the details are still being debated, a mechanism for FAEO in which the oxidation mechanism consisted of two parallel paths is generally accepted. The direct pathway occurs via the dehydrogenation reaction of HCOOH, while the indirect pathway proceeds by the dehydration reaction to form adsorbed CO as an intermediate, which then is oxidized to CO2.

Direct pathway: HCOOH → Active intermediate → CO2 + 2H+ + 2e−

Indirect pathway: HCOOH → COads + H2O → CO2 + 2H+ + 2e−

The indirect oxidation pathway occurs via dehydration reaction and temporarily forms the poisoning intermediate COads, which reduces the efficiency of the fuel cell. [15]

Catalysts used in DFAFC

Cathode

The important characteristics for a DFAFC catalyst at the cathode are mainly high activity toward ORR and tolerance to FA, in order to prevent the cell's drop in efficiency following possible FA cross over. The material of choice is platinum (Pt) on top of composite substrates such as TiO2/C and CNx nanofibers. Alternative catalysts include iridium (Ir) and Ir alloys, together with cobalt (Co) and iron (Fe) deposited on nitrogen-doped carbon nanotubes (CNTs). [4]

Anode

Platinum (Pt) and palladium (Pd)-based catalysts are two prominent anode options for DFAFC.

The surface morphology of the platinum particles has an effect on the reaction, as steps and terraces favor the desirable direct pathway, while flat particles result in the indirect (undesirable) pathway taking place.

In general, Pd catalysts have higher CO tolerance, are faster at catalyzing FA into carbon dioxide, and their power density is higher than their Pt counterparts. Their drawback is the formation of agglomerates and its quick loss of function. [4]

History

During previous investigations, researchers dismissed formic acid as a practical fuel because of the high overpotential shown by experiments: this meant the reaction appeared to be too difficult to be practical. However, in 2005 - 2006, other researchers (in particular Richard Masel's group at the University of Illinois at Urbana-Champaign) found that the reason for the low performance was the usage of platinum as a catalyst, as it is common in most other types of fuel cells. Using palladium instead, they claim to have obtained better performance than equivalent direct methanol fuel cells. [15] As of April 2006, Tekion [16] held the exclusive license to DFAFC fuel cell technology using PEM membranes and formic-acid fuel from the University of Illinois at Urbana-Champaign, and with an investment from Motorola, [17] was partnering with BASF to design and manufacture power packs by late 2007, [18] but development appears to have stalled, and almost all information was removed from Tekion's website before April 24, 2010.

Neah Power Systems, Inc. and Silent Falcon UAS Technologies worked together to integrate formic acid reformer fuel cell technology into the Silent Falcon's unmanned aerial system (UAS), aka "drone". [19] [20]

In 2018, work was published addressing the issue of requiring a high overpotential by way of golden single-atom-site platinum catalysts. [21]

See also

Related Research Articles

<span class="mw-page-title-main">Fuel cell</span> Device that converts the chemical energy from a fuel into electricity

A fuel cell is an electrochemical cell that converts the chemical energy of a fuel and an oxidizing agent into electricity through a pair of redox reactions. Fuel cells are different from most batteries in requiring a continuous source of fuel and oxygen to sustain the chemical reaction, whereas in a battery the chemical energy usually comes from substances that are already present in the battery. Fuel cells can produce electricity continuously for as long as fuel and oxygen are supplied.

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity".

<span class="mw-page-title-main">Formic acid</span> Simplest carboxylic acid (HCOOH)

Formic acid, systematically named methanoic acid, is the simplest carboxylic acid, and has the chemical formula HCOOH and structure H−C(=O)−O−H. It is an important intermediate in chemical synthesis and occurs naturally, most notably in some ants. Esters, salts and the anion derived from formic acid are called formates. Industrially, formic acid is produced from methanol.

<span class="mw-page-title-main">Proton-exchange membrane fuel cell</span> Power generation technology

Proton-exchange membrane fuel cells (PEMFC), also known as polymer electrolyte membrane (PEM) fuel cells, are a type of fuel cell being developed mainly for transport applications, as well as for stationary fuel-cell applications and portable fuel-cell applications. Their distinguishing features include lower temperature/pressure ranges and a special proton-conducting polymer electrolyte membrane. PEMFCs generate electricity and operate on the opposite principle to PEM electrolysis, which consumes electricity. They are a leading candidate to replace the aging alkaline fuel-cell technology, which was used in the Space Shuttle.

<span class="mw-page-title-main">Direct methanol fuel cell</span>

Direct-methanol fuel cells or DMFCs are a subcategory of proton-exchange fuel cells in which methanol is used as the fuel. Their main advantage is the ease of transport of methanol, an energy-dense yet reasonably stable liquid at all environmental conditions.

<span class="mw-page-title-main">Solid oxide fuel cell</span> Fuel cell that produces electricity by oxidization

A solid oxide fuel cell is an electrochemical conversion device that produces electricity directly from oxidizing a fuel. Fuel cells are characterized by their electrolyte material; the SOFC has a solid oxide or ceramic electrolyte.

<span class="mw-page-title-main">Alkaline fuel cell</span> Type of fuel cell

The alkaline fuel cell (AFC), also known as the Bacon fuel cell after its British inventor, Francis Thomas Bacon, is one of the most developed fuel cell technologies. Alkaline fuel cells consume hydrogen and pure oxygen, to produce potable water, heat, and electricity. They are among the most efficient fuel cells, having the potential to reach 70%.

<span class="mw-page-title-main">Electrolysis of water</span> Electricity-induced chemical reaction

Electrolysis of water is using electricity to split water into oxygen and hydrogen gas by electrolysis. Hydrogen gas released in this way can be used as hydrogen fuel, but must be kept apart from the oxygen as the mixture would be extremely explosive. Separately pressurised into convenient 'tanks' or 'gas bottles', hydrogen can be used for oxyhydrogen welding and other applications, as the hydrogen / oxygen flame can reach approximately 2,800°C.

Direct-ethanol fuel cells or DEFCs are a category of fuel cell in which ethanol is fed directly into the cell. They have been used as a model to investigate a range of fuel cell concepts including the use of PEM.

In electrochemistry, electrosynthesis is the synthesis of chemical compounds in an electrochemical cell. Compared to ordinary redox reactions, electrosynthesis sometimes offers improved selectivity and yields. Electrosynthesis is actively studied as a science and also has industrial applications. Electrooxidation has potential for wastewater treatment as well.

A Direct Carbon Fuel Cell (DCFC) is a fuel cell that uses a carbon rich material as a fuel such as bio-mass or coal. The cell produces energy by combining carbon and oxygen, which releases carbon dioxide as a by-product. It is also called coal fuel cells (CFCs), carbon-air fuel cells (CAFCs), direct carbon/coal fuel cells (DCFCs), and DC-SOFC.

An enzymatic biofuel cell is a specific type of fuel cell that uses enzymes as a catalyst to oxidize its fuel, rather than precious metals. Enzymatic biofuel cells, while currently confined to research facilities, are widely prized for the promise they hold in terms of their relatively inexpensive components and fuels, as well as a potential power source for bionic implants.

<span class="mw-page-title-main">Solid oxide electrolyzer cell</span> Type of fuel cell

A solid oxide electrolyzer cell (SOEC) is a solid oxide fuel cell that runs in regenerative mode to achieve the electrolysis of water by using a solid oxide, or ceramic, electrolyte to produce hydrogen gas and oxygen. The production of pure hydrogen is compelling because it is a clean fuel that can be stored, making it a potential alternative to batteries, methane, and other energy sources. Electrolysis is currently the most promising method of hydrogen production from water due to high efficiency of conversion and relatively low required energy input when compared to thermochemical and photocatalytic methods.

<span class="mw-page-title-main">Electrocatalyst</span> Catalyst participating in electrochemical reactions

An electrocatalyst is a catalyst that participates in electrochemical reactions. Electrocatalysts are a specific form of catalysts that function at electrode surfaces or, most commonly, may be the electrode surface itself. An electrocatalyst can be heterogeneous such as a platinized electrode. Homogeneous electrocatalysts, which are soluble, assist in transferring electrons between the electrode and reactants, and/or facilitate an intermediate chemical transformation described by an overall half reaction. Major challenges in electrocatalysts focus on fuel cells.

Electromethanogenesis is a form of electrofuel production where methane is produced by direct biological conversion of electrical current and carbon dioxide.

Membraneless Fuel Cells convert stored chemical energy into electrical energy without the use of a conducting membrane as with other types of Fuel Cells. In Laminar Flow Fuel Cells (LFFC) this is achieved by exploiting the phenomenon of non-mixing laminar flows where the interface between the two flows works as a proton/ion conductor. The interface allows for high diffusivity and eliminates the need for costly membranes. The operating principles of these cells mean that they can only be built to millimeter-scale sizes. The lack of a membrane means they are cheaper but the size limits their use to portable applications which require small amounts of power.

<span class="mw-page-title-main">Alkaline anion exchange membrane fuel cell</span>

An alkaline anion exchange membrane fuel cell (AAEMFC), also known as anion-exchange membrane fuel cells (AEMFCs), alkaline membrane fuel cells (AMFCs), hydroxide exchange membrane fuel cells (HEMFCs), or solid alkaline fuel cells (SAFCs) is a type of alkaline fuel cell that uses an anion exchange membrane to separate the anode and cathode compartments.

<span class="mw-page-title-main">Proton exchange membrane electrolysis</span> Technology for splitting water molecules

Proton exchange membrane(PEM) electrolysis is the electrolysis of water in a cell equipped with a solid polymer electrolyte (SPE) that is responsible for the conduction of protons, separation of product gases, and electrical insulation of the electrodes. The PEM electrolyzer was introduced to overcome the issues of partial load, low current density, and low pressure operation currently plaguing the alkaline electrolyzer. It involves a proton-exchange membrane.

A sugar battery is an emerging type of biobattery that is fueled by maltodextrin and facilitated by the enzymatic catalysts.

Solid acid fuel cells (SAFCs) are a class of fuel cells characterized by the use of a solid acid material as the electrolyte. Similar to proton exchange membrane fuel cells and solid oxide fuel cells, they extract electricity from the electrochemical conversion of hydrogen- and oxygen-containing gases, leaving only water as a byproduct. Current SAFC systems use hydrogen gas obtained from a range of different fuels, such as industrial-grade propane and diesel. They operate at mid-range temperatures, from 200 to 300 °C.

References

  1. 1 2 3 Ma, Zhenni; Legrand, Ulrich; Pahija, Ergys; Tavares, Jason R.; Boffito, Daria C. (2021-01-20). "From CO 2 to Formic Acid Fuel Cells". Industrial & Engineering Chemistry Research. 60 (2): 803–815. doi:10.1021/acs.iecr.0c04711. ISSN   0888-5885. S2CID   230551252.
  2. 1 2 Eppinger, Jörg; Huang, Kuo-Wei (2017-01-13). "Formic Acid as a Hydrogen Energy Carrier". ACS Energy Letters. 2 (1): 188–195. doi:10.1021/acsenergylett.6b00574. hdl: 10754/623086 . ISSN   2380-8195.
  3. ↑ Elnabawy, Ahmed O.; Herron, Jeffrey A.; Liang, Zhixiu; Adzic, Radoslav R.; Mavrikakis, Manos (2021-04-19). "Formic Acid Electrooxidation on Pt or Pd Monolayer on Transition-Metal Single Crystals: A First-Principles Structure Sensitivity Analysis". ACS Catalysis. 11 (9): 5294–5309. doi:10.1021/acscatal.1c00017. ISSN   2155-5435. OSTI   1835132. S2CID   234865108.
  4. 1 2 3 4 5 6 Bhaskaran, Rashmi; Abraham, Bincy George; Chetty, Raghuram (March 2022). "Recent advances in electrocatalysts, mechanism, and cell architecture for direct formic acid fuel cells". WIREs Energy and Environment. 11 (2). doi:10.1002/wene.419. ISSN   2041-8396. S2CID   244608995.
  5. 1 2 Maslan, Nur Hidayah; Rosli, Masli Irwan; Masdar, Mohd Shahbudin (November 2019). "Three-dimensional CFD modeling of a direct formic acid fuel cell". International Journal of Hydrogen Energy. 44 (58): 30627–30635. doi:10.1016/j.ijhydene.2019.01.062. ISSN   0360-3199. S2CID   145950088.
  6. ↑ Yin, Min; Li, Qingfeng; Jensen, Jens Oluf; Huang, Yunjie; Cleemann, Lars N.; Bjerrum, Niels J.; Xing, Wei (December 2012). "Tungsten carbide promoted Pd and Pd–Co electrocatalysts for formic acid electrooxidation". Journal of Power Sources. 219: 106–111. Bibcode:2012JPS...219..106Y. doi:10.1016/j.jpowsour.2012.07.032. ISSN   0378-7753. S2CID   97664243.
  7. ↑ Hong, Ping; Zhong, Yiliang; Liao, Shijun; Zeng, Jianhuang; Lu, Xueyi; Chen, Wei (July 2011). "A 4-cell miniature direct formic acid fuel cell stack with independent fuel reservoir: Design and performance investigation". Journal of Power Sources. 196 (14): 5913–5917. Bibcode:2011JPS...196.5913H. doi:10.1016/j.jpowsour.2011.03.014. ISSN   0378-7753.
  8. ↑ James, Brian David; DeSantis, Daniel Allan; Saur, Genevieve (2016-09-30). "Final Report: Hydrogen Production Pathways Cost Analysis (2013 – 2016)". doi: 10.2172/1346418 . OSTI   1346418.{{cite journal}}: Cite journal requires |journal= (help)
  9. ↑ "Intelligent Energy, Suzuki exhibit fuel cell scooter at Tokyo show". Fuel Cells Bulletin. 2009 (12): 3. December 2009. doi:10.1016/s1464-2859(09)70382-7. ISSN   1464-2859.
  10. ↑ Abderezzak, Bilal (2018), "Introduction to Hydrogen Technology", Introduction to Transfer Phenomena in PEM Fuel Cell, Elsevier, pp. 1–51, doi:10.1016/b978-1-78548-291-5.50001-9, ISBN   9781785482915 , retrieved 2022-11-16
  11. ↑ Kang, Jee Eun; Brown, Tim; Recker, Will W.; Samuelsen, G. Scott (February 2014). "Refueling hydrogen fuel cell vehicles with 68 proposed refueling stations in California: Measuring deviations from daily travel patterns". International Journal of Hydrogen Energy. 39 (7): 3444–3449. doi:10.1016/j.ijhydene.2013.10.167. ISSN   0360-3199. S2CID   54986038.
  12. ↑ Methanol Institute. org/methanol-price-supply-demand/ "Methanol Price".{{cite web}}: Check |url= value (help)
  13. ↑ Sebastián, David; Baglio, Vincenzo; Aricò, Antonino S.; Serov, Alexey; Atanassov, Plamen (March 2016). "Performance analysis of a non-platinum group metal catalyst based on iron-aminoantipyrine for direct methanol fuel cells". Applied Catalysis B: Environmental. 182: 297–305. doi:10.1016/j.apcatb.2015.09.043. ISSN   0926-3373.
  14. ↑ Xia, C (2018). "A High-Energy-Density Lithium-Oxygen Battery Based on a Reversible Four-Electron Conversion to Lithium Oxide". Science. 361 (6404): 777–781. Bibcode:2018Sci...361..777X. doi: 10.1126/science.aas9343 . PMID   30139868. S2CID   52073409.
  15. 1 2 S. Ha, R. Larsen, and R. I. Masel (2005). "Performance characterization of Pd/C nanocatalyst for direct formic acid fuel cells". Journal of Power Sources. 144 (1): 28–34. Bibcode:2005JPS...144...28H. doi:10.1016/j.jpowsour.2004.12.031.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  16. ↑ "Home". tekion.com.
  17. ↑ "Motorola Invests In Fuel Cell Startup". 66mobile.com. 2005-11-13. Retrieved 2014-03-12.
  18. ↑ "Formic acid fuel cell gets boost". Chemical Processing. 2006-04-27. Retrieved 2014-03-12.
  19. ↑ Nov/Dec 2014 issue of Aerospace Manufacturing and Design, onlineamd.com [ full citation needed ]
  20. ↑ "Neah Power partners to integrate fuel cells into UAV | UASMagazine.com". uasmagazine.com. Retrieved 2022-08-19.
  21. ↑ Zhang, Peng; Zheng, Nanfeng; Jiang, De-en; Chen, Shaowei; Almarhoon, Zainab; Aldalbahi, Ali; Regier, Tom; Yuan, Jun; Zhao, Xiaojing; Fung, Victor; Deming, Christopher P.; Li, Z. Y.; Duchesne, Paul N. (1 November 2018). "Golden single-atomic-site platinum electrocatalysts" (PDF). Nature Materials. 17 (11): 1033–1039. Bibcode:2018NatMa..17.1033D. doi:10.1038/s41563-018-0167-5. PMID   30250176. S2CID   205566105.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.