GWR 4073 Class 4079 Pendennis Castle

Last updated

Pendennis Castle
4079 Pendennis Castle at Didcot.jpg
Pendennis Castle in 1977
Type and origin
Power typeSteam
Designer Charles Collett
Builder Swindon Works
Build dateFebruary 1924
Specifications
Configuration:
   Whyte 4-6-0
Gauge 1,435 mm (4 ft 8+12 in) standard gauge
Fuel type Coal
Career
Operators Great Western Railway
British Railways
Class Castle
Numbers4079
RetiredMay 1964
Restored1977, 2021
Current owner Great Western Society

GWR 4073 "Castle" Class No. 4079 Pendennis Castle is a 4-6-0 steam locomotive built in 1924 for the Great Western Railway (GWR) at Swindon Works to a design of Charles Collett. It was employed on long-distance express passenger trains on the GWR and its successor, British Railways' Western Region.

Contents

Pendennis Castle gained initial notoriety in 1925, when it outperformed rival engines during trials on the London and North Eastern Railway. It was bought for preservation in 1964 after covering 1.75 million miles in revenue earning service. In 1977, it was sold to Hamersley Iron, based in Western Australia, where it was shipped in the following year and operated until 1994. Upon returning to England in 2000, the engine awaited restoration at Didcot Railway Centre, its new base, which took volunteers 16 years to complete. In August 2021, Pendennis Castle returned to steam for the first time in 27 years, and will run on heritage railways across Britain.

Operations

No. 4079 Pendennis Castle was the seventh of a total of 171 "Castle" Class locomotives built at Swindon Works in 1923–1924 by the Great Western Railway (GWR), and designed for hauling express passenger services. It was completed in February 1924, and named after Pendennis Castle in Falmouth, Cornwall. [1] It was allocated to Old Oak Common locomotive depot in west London. [2]

The locomotive became famous in April and May 1925, when the GWR lent it to the London and North Eastern Railway (LNER) as part of performance trials against the LNER's then new 4-6-2 A1 Class, the most famous example being No. 4472 Flying Scotsman. Running from London King's Cross to Grantham, and King's Cross to Doncaster, 4079 made the ascent from King's Cross to Finsbury Park regularly in less than six minutes, a feat the larger A1's were unable to match. Pendennis Castle was also shown to be more economical in both coal and water on the test runs, its superiority in burning unfamiliar Yorkshire coal being measured at 3.7lb per mile. [3] [2] [4] Before returning to the GWR, the locomotive was put on display at the second British Empire Exhibition at Wembley Park between May and October 1925 next to Flying Scotsman, [2] [4] with a notice proclaiming it to be the most powerful express passenger locomotive in Britain. [1]

Back at Old Oak Common, it continued to run the routes to South Wales and the West Country until after the GWR was nationalised in 1948 to become part of British Railways. In August 1950, it was allocated to Gloucester shed, in March 1959 to Bristol Bath Road, and its last shed allocation was Bristol Saint Philip's Marsh. [5]

On 9 May 1964, No. 4079 took part in a high-speed railtour from London Paddington to Plymouth to commemorate the 60th anniversary of No. 3440 City of Truro's unofficial 100 mph run. However, upon reaching 97 mph, the firebars melted from the high heat of its fire. [1] On arrival at Westbury the locomotive was immediately withdrawn, and "Hall" Class No. 6999 Capel Dewi Hall took over. While sitting at Westbury shed, bookshop owner Mike Higson, who was interested in purchasing a steam locomotive, was able to conclude a deal with British Railways to buy 4079 for £1,750. Arrangements were then made for it to be moved to Swindon for repairs to the damage caused and a repaint. [1] 4079 retired with a recorded 1.758 million miles in a little over 40 years of service on the GWR. [3]

Preservation

Early preserved years (1964–1977)

At Steamtown, Carnforth in May 1975 GWR Collett "Castle" Class 4-6-0 No.4079 - 29914581092.jpg
At Steamtown, Carnforth in May 1975

Following completion of its overhaul in March 1965, Pendennis Castle was transferred to Southall Railway Centre and appeared at one of the Great Western Society's (GWS) first open days. [1] In November of that year, it became the last Castle engine to arrive at London Paddington before the end of steam traction on British Railways. [1]

In 1967, as Higson was in the process of selling the locomotive to rail enthusiast Pat Whitehouse, the bid was retracted as William McAlpine and John Gretton had made a higher bid. [1] Under its new ownership, 4079 moved to the former GWR depot at Didcot, taking up residence in the disused lifting shop. In 1971, Pendennis Castle was among 23 steam locomotives approved for mainline running after British Railways lifted their steam ban. [1] In the following year it relocated once more to Market Overton in Rutland. In April 1974, 4079 reunited with Flying Scotsman for two steam specials from Newport to Shrewsbury. [1]

Western Australia (1977–2000)

By 1977, McAlpine had become the sole owner of 4079, where it sat waiting for repair at Steamtown in Carnforth. He then sold the engine to Hamersley Iron, one of the largest iron ore producers in Western Australia, which intended to run it on its 240 miles (390 km) ore-carrying Hamersley railway. [2] [1] Managing Director Russell Maddigan had offered to buy Flying Scotsman, but settled for 4079 and had it restored at Carnforth. [1] [6] On 29 May 1977, after hauling the Great Western Envoy from Birmingham to Didcot and return, 4079 headed to Avonmouth Docks where it departed for Sydney, where it was stored at Eveleigh Carriage Workshops. [2] [7] In the following March, 4079 travelled to Newcastle, New South Wales where it was loaded aboard the Iron Baron for Dampier, Western Australia, where Hamersley manager Ian Burston handed it over to the Pilbara Railways Historical Society. [2] [8]

On 12 October, Pendennis Castle and two former New South Wales Government Railways S type passenger cars were named Rio Fe by Lady Turner, wife of Sir Mark Turner, chairman of Rio Tinto, one of the major investors in Hamersley Iron. A brass plaque bearing the name Rio Fe was fitted above 4079's smokebox door. On 7 November 1978, Pendennis Castle's completed its first passenger run with a return trip from Dampier to Dugite. [1] [2] Modified in 1980, Pendennis Castle was used for excursion trains on the Hamersley railway. [1] It was moved by road to Perth, where it had a historic reunion with Flying Scotsman during the latter's tour of Australia on 17 September 1989. [1] It went on to operate on the Westrail network. [9]

After various problems with the expiry of its boiler certificate, 4079 made its final run in Australia on 14 October 1994 before it was put in storage. [10] [1] Hamersley Iron were not prepared to pay a repair bill of 240,000 Australian Dollars, and repairs were becoming uneconomical after fully electronic signalling was installed, which would have required the locomotive to be towed behind a diesel. [1] [6] [ dead link ] [11]

Adrian Lumley-Smith who was on secondment from Rio Tinto in London to Hamersley Iron became aware of the situation in 1998 when he moved to Perth and hatched the idea that 4079 should be relocated back to the UK and fully restored. Senior management in Perth and London agreed that such an iconic locomotive should not be left languishing in Dampier. [12]

Return to England and restoration (2000–present)

Undergoing restoration at Didcot Railway Centre in October 2005 GWR Pendennis Castle Didcot Restoration.jpg
Undergoing restoration at Didcot Railway Centre in October 2005

Rio Tinto started to find a secure home for 4079 and in September 1998, contacted The Railway Magazine editor Nick Pigott, who had Adrian Knowles prepare a case for the engine to return to Didcot Railway Centre. The pitch was successful, and a £37,500 grant from the Heritage Lottery Fund was quickly received and covered three-quarters of the costs to have it shipped to England. [1] On Easter 2000, 4079 left Fremantle on the container ship Toba, arriving in Bristol on 8 June and onward to Didcot. [1] [13] It became only the second locomotive after Flying Scotsman to circumnavigate the globe. [14]

At Didcot in March 2023. GWR 4079 Pendennis Castle Didcot Railway Centre 4th March 2023.jpg
At Didcot in March 2023.

The restoration of 4079 at Didcot was carried out entirely by a group of 20 volunteers; manager Drew Fermor said they were determined to work at a high standard while minimising costs. The original plan was to complete overhaul by 2004, but it was pushed back to 2007 and then to 2014. [1] In 2018, the GWS board decided not register any of its locomotives for mainline certification as it believed it would earn a more reliable income as a locomotive for hire on other heritage lines. In addition, the GWS felt the costly installation of electronic equipment, and other modifications required for mainline running, would denigrate its original and authentic appearance. [1]

On 13 August 2021, Pendennis Castle was steamed for the first time in 27 years. [1] [11] [14] On 2 February 2022, it moved under its own steam for the first time since 1994, and for the first time in the UK since 1977. It was officially relaunched into traffic at a special event at Didcot on 2 April 2022. [15]

Related Research Articles

<span class="mw-page-title-main">GWR 4073 Class</span> Class of 171 four-cylinder 4-6-0 locomotives

The 4073 or Castle Class are 4-6-0 steam locomotives of the Great Western Railway, built between 1923 and 1950. They were designed by the railway's Chief Mechanical Engineer, Charles Collett, for working the company's express passenger trains. They could reach speeds of up to 100 mph (160 km/h).

<span class="mw-page-title-main">Didcot Railway Centre</span> Operational Railway museum in Oxfordshire, England

Didcot Railway Centre is a railway museum and preservation engineering site in Didcot, Oxfordshire, England. The site was formerly a Great Western Railway engine shed and locomotive stabling point.

<span class="mw-page-title-main">Tyseley Locomotive Works</span> Railway museum in Birmingham, England

Tyseley Locomotive Works, formerly the Birmingham Railway Museum, is the engineering arm of steam railtour promoter Vintage Trains based in Birmingham, England. It occupies part of the former Great Western Railway's Tyseley depot, built in 1908 to accommodate expanding operations in the West Midlands, particularly the opening of the North Warwickshire Line as a new main line from Birmingham to Bristol.

<span class="mw-page-title-main">Locomotives of the Great Western Railway</span> List of railway locomotives used by the Great Western Railway

The first Locomotives of the Great Western Railway (GWR) were specified by Isambard Kingdom Brunel but Daniel Gooch was soon appointed as the railway's Locomotive Superintendent. He designed several different 7 ft 14 in broad gauge types for the growing railway, such as the Firefly and later Iron Duke Class 2-2-2s. In 1864 Gooch was succeeded by Joseph Armstrong who brought his standard gauge experience to the workshops at Swindon. To replace some of the earlier locomotives, he put broad gauge wheels on his standard gauge locomotives and from this time on all locomotives were given numbers, including the broad gauge ones that had previously carried just names.

GWR 4073 Class 5051 <i>Earl Bathurst</i>

5051 Drysllwyn Castle is a Great Western Railway (GWR) Castle Class locomotive built at Swindon Works in May 1936 and named after Dryslwyn Castle. It is owned by the Didcot Railway Centre.

<span class="mw-page-title-main">LNER Gresley Classes A1 and A3</span> Class of 4-6-2 pacific locomotive designed by Sir Nigel Gresley

The London and North Eastern Railway Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.

GWR 6000 Class 6023 <i>King Edward II</i> Preserved British steam locomotive

Great Western Railway (GWR) 6000 Class 6023 King Edward II is a preserved steam locomotive.

<span class="mw-page-title-main">Charles Collett</span> British railway engineer

Charles Benjamin Collett was Chief Mechanical Engineer of the Great Western Railway from 1922 to 1941. He designed the GWR's 4-6-0 Castle and King Class express passenger locomotives.

<span class="mw-page-title-main">GWR 4700 Class</span> Class of nine 2-8-0 steam locomotives

The Great Western Railway (GWR) 4700 Class was a class of nine 2-8-0 steam locomotives, designed by George Jackson Churchward. They were introduced in 1919 for heavy mixed-traffic work. Although primarily designed for fast freight, the class also sometimes hauled passenger trains, notably heavy holiday expresses in the summer months. They were unofficially nicknamed "Night Owls" because they were primarily designed to haul goods during the night and they could be seen simmering in the daylight, awaiting their nocturnal duties.

GWR 4073 Class 5029 <i>Nunney Castle</i>

GWR 4073 Class 5029 Nunney Castle is a Great Western Railway Castle Class steam locomotive. It was built at the GWR's Swindon Works in 1934, being outshopped on 28 May and taking the name of Nunney Castle near Frome, Somerset. The locomotive was used in many publicity and "life on the railway" type of photographs. During the first day of the evacuation of civilians during World War II, the locomotive hauled trains carrying children being taken from London to the safety of the countryside. Nunney Castle was also used to haul the Royal Train in October 1957 from London Paddington station to Gloucester.

GWR 4073 Class 5043 <i>Earl of Mount Edgcumbe</i>

The GWR 4073 Class 5043 Earl of Mount Edgcumbe is a steam locomotive of the GWR 'Castle' Class, built in March 1936. It was originally named Barbury Castle, and was renamed Earl of Mount Edgcumbe in September 1937. It had a double chimney and 4 row superheater fitted in October 1958.

GWR 4073 Class 7029 <i>Clun Castle</i>

GWR 4073 Class No. 7029 Clun Castle is a 4-6-0 steam locomotive built at Swindon Works in May 1950 to a design by Charles Collett for operation on the Western Region of British Railways. It was named after Clun Castle in Shropshire.

GWR 4073 Class 7027 <i>Thornbury Castle</i> Preserved British 4-6-0 locomotive

7027 Thornbury Castle was built in August 1949. Its first shed allocation was Plymouth Laira. Its March 1959 shed allocation was Old Oak Common. Its last shed allocation was Reading. It was withdrawn in December 1963 and arrived at Woodham Brothers scrapyard in Barry, South Wales in May 1964. The locomotive was not scrapped and was being restored in 2022.

GWR 4073 Class 4073 <i>Caerphilly Castle</i>

Caerphilly Castle is a member of the GWR 4073 Class built in August 1923.

<span class="mw-page-title-main">Sir William McAlpine, 6th Baronet</span> British businessman (1936–2018)

Sir William Hepburn McAlpine, 6th Baronet, was a British businessman who was director of the construction company Sir Robert McAlpine.

<span class="mw-page-title-main">Hamersley & Robe River railway</span> Private railway in Pilbara region of Western Australia

The Hamersley & Robe River railway, majority-owned by Rio Tinto, and operated by its subsidiary Pilbara Iron, is a private rail network in the Pilbara region of Western Australia for the purpose of carrying iron ore. The network is larger than any other Australian heavy freight rail network in private ownership. The total length of its track is about 1,700 km (1,056 mi).

<span class="mw-page-title-main">New South Wales S type carriage stock</span>

The S type carriage stock was a type of steel passenger carriage operated by the New South Wales Government Railways from 1935 until 1989.

The Railways in the Pilbara are a collection of railways in the Pilbara region of north-west Western Australia.

Pendennis may refer to:

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Jones, Robin (31 August 2021). "Pendennis Castle back in steam after 27 years!". Heritage Railway. Retrieved 21 February 2023 via Pressreader.
  2. 1 2 3 4 5 6 7 Joyce, John; Tilley, Allan (1980). Railways in the Pilbara (2nd ed.). Wembley, WA: J & A Publications. p. 61. ISBN   0959969926. OCLC   222691305.
  3. 1 2 Kerr & Langston 2015, p. 46.
  4. 1 2 le Fleming, H.M. (November 1960) [1953]. White, D.E. (ed.). Part 8: Modern Passenger Classes. The Locomotives of the Great Western Railway (2nd ed.). Kenilworth: Railway Correspondence and Travel Society. p. H16. ISBN   0-901115-19-3.
  5. "Great Western 'Castle' class 4073 - 4099".
  6. 1 2 "Login".
  7. Pendennis Castle down under The Railway Magazine issue 918 October 1977 page 511
  8. Pendennis Castle moves The Railway Magazine issue 927 July 1978 page 361
  9. The World's Heaviest Driverless Trains Locomotives International issue 125 June 2020 page 14
  10. "Pendennis Castle to Head Home This Month" Railway Digest April 2000 page 19
  11. 1 2 Pendennis returns Steam Railway issue 523 September 2021 pages 7-13
  12. Great Western Echo, Issue 237 Spring 2022, page 2 and pages 4-5
  13. "Pendennis Castle on its Way Home" Railway Digest June 2000 page 17
  14. 1 2 Pendennis Castle Back in Steam after 27 years Heritage Railway issue 284 September 2021 pages 52-57
  15. Smith, Roger (17 February 2000). "Steam locomotive 4079 Pendennis Castle moves under own steam". Railadvent. Retrieved 26 February 2023.

Sources

Further reading