Garmin G1000

Last updated
Diamond DA42 Twin Star cockpit with Garmin G1000 Garmin G1000 Diamond DA-42.jpg
Diamond DA42 Twin Star cockpit with Garmin G1000

The Garmin G1000 is an electronic flight instrument system (EFIS) typically composed of two display units, one serving as a primary flight display, and one as a multi-function display. Manufactured by Garmin Aviation, it serves as a replacement for most conventional flight instruments and avionics. Introduced in June 2004, the system has since become one of the most popular integrated glass cockpit solutions for general aviation and business aircraft. [1]

Contents

Components

An aircraft with a basic Garmin G1000 installation contains two LCDs (one acting as the primary flight display and the other as the multi-function display) as well as an integrated communications panel that fits between the two. These displays are designated as a GDU, Garmin Display Unit.

Beyond that, additional features are found on newer and larger G1000 installations, such as in business jets. This includes:

Depending on the airplane manufacturer and whether or not a GFC 700 autopilot is installed, the G1000 system will consist of either two GDU 1040 displays (no autopilot), a GDU 1040 PFD/GDU 1043 MFD (GFC 700 autopilot installed), or a GDU 1045 PFD/GDU 1045 MFD (GFC 700 autopilot installed with VNAV).

The GDU 1040 is the standard base bezel with no autopilot/flight director mode selection keys below the heading bug. The GDU 1043 has autopilot/flight director keys for all GFC 700 modes except VNAV. The GDU 1045 is essentially identical to the GDU 1043 except for the addition of an autopilot/flight director mode for VNAV. Depending on how the units are installed, an MFD failure may, or may not, affect autopilot or flight director use. If a GDU 1040 is used as a PFD in an airplane equipped with a GFC 700 autopilot, a failure of the MFD (which houses the autopilot mode selection keys) will leave the autopilot engaged, but the modes cannot be changed because no autopilot keys are present on the PFD. But, if an MFD failure occurs in an airplane with the GFC 700 autopilot and either a GDU 1043 or a GDU 1045 bezel installed as a PFD, the pilot will have full use of the autopilot through the keys on the PFD.

Both the PFD and MFD each have two slots for SD memory cards. The top slot is used to update the Jeppesen aviation database (also known as NavData) every 28 days, and to load software and configuration to the system. The aviation database must be current to use GPS for navigation during IFR instrument approaches. The bottom slot houses the World terrain and Jeppesen obstacle databases. While terrain information rarely changes or needs to be updated, obstacle databases can be updated every 56 days through a subscription service. The top card can be removed from the G1000 system following an update, but the bottom card must stay in both the PFD and MFD to ensure accurate terrain awareness and TAWS-B information.

Primary flight display

Screenshot of the PFD on the G1000 G1000 PFD screenshot.png
Screenshot of the PFD on the G1000

The primary flight display (PFD) shows the basic flight instruments, such as the attitude indicator, airspeed indicator, altimeter, heading indicator, and course deviation indicator. A small map called the "inset map" can be enabled in the corner. The buttons on the PFD are used to set the squawk code on the transponder. The PFD can also be used for entering and activating flight plans. The PFD also has a "reversionary mode" which is capable of displaying all information shown on the MFD (for example, engine gauges and navigational information). This capability is provided in case of an PFD failure.

Multi-function display

The MFD usually shows engine instrumentation and a moving map. G1000 MFD screenshot.png
The MFD usually shows engine instrumentation and a moving map.

The multi-function display (MFD) typically shows a moving map on the right side, and engine instrumentation on the left. Most of the other screens in the G1000 system are accessed by turning the knob on the lower right corner of the unit. Screens available from the MFD other than the map include the setup menus, information about nearest airports and NAVAIDs, Mode S traffic reports, terrain awareness, XM radio, flight plan programming, and GPS RAIM prediction.

Implementation

Garmin G1000 setup overview Garmin G1000 setup overview.png
Garmin G1000 setup overview

The G1000 system consists of several integrated components which sample and exchange data or display information to the pilot.

GDU display

The GDU display unit acts as the primary source of flight information for the pilot. Each display can interchangeably serve as a primary flight display (PFD) or multi-function display (MFD). The wiring harness within the aircraft specifies which role each display is in by default. All of the displays within an aircraft are interconnected using a high-speed Ethernet data bus. A G1000 installation may have two GDUs (one PFD and one MFD) or three (one PFD for each pilot and an MFD). There are several different GDU models in service, which have different screen sizes (from 10 inches to 15 inches) and different bezel controls.

In normal operation, the display in front of the pilot is the PFD and will provide aircraft attitude, airspeed, altitude, vertical speed, heading, rate-of-turn, slip-and-skid, navigation, transponder, inset map view (containing map, traffic, and terrain information), and systems annunciation data. The second display, typically positioned to the right of the PFD, operates in MFD mode and provides engine instrumentation and a moving map display. The moving map can be replaced or overlaid by various other types of data, such as satellite weather, checklists, system information, waypoint information, weather sensor data, and traffic awareness information.

Both displays provide redundant information regarding communications and navigation radio frequency settings even though each display is usually only paired with one GIA Integrated Avionics Unit. In the event of a single display failure, the remaining display will adopt a combined "reversionary mode" and automatically become a PFD combined with engine instrumentation data and other functions of the MFD. A red button labeled "reversionary mode" or "display backup," located on the GMA audio panel, is also available to the pilot to select this mode manually if desired.

GMA audio panel

The GMA panel provides buttons for selecting what audio sources are heard by each member of the cockpit. It also includes a button for forcing the integrated cockpit into its fail-safe reversionary mode.

GMC/GCU remote controllers

The GMC and GCU controllers are panel-mounted modules which provide a more intuitive interface for the pilot than that provided by the GDU. The GMC controls the G1000's autopilot, while the GCU is used to enter navigational data and control the GDU's functions.

GIA integrated avionics unit

The GIA unit is a combined communications and navigation radio, and also serves as the primary data aggregator for the G1000 system. It provides a two-way VHF communications transceiver, a VHF navigation receiver with glideslope, a GPS receiver, and a variety of supporting processors. Each unit is paired with a GDU display, which acts as a controlling unit. The GIA 63W, found on many newer G1000 installations, is an updated version of the older GIA 63 which includes Wide Area Augmentation System support.

GDC air data computer

The GDC computer replaces the internal components of the pitot-static system in traditional aircraft instrumentation. It measures airspeed, altitude, vertical speed, and outside air temperature. This data is then provided to all the displays and integrated avionics units.

GRS attitude and heading reference system (AHRS)

The GRS system uses solid-state sensors to measure aircraft attitude, rate of turn, and slip and skid. This data is then provided to all the integrated avionics units and GDU display units. Unlike many competing systems, the AHRS can be rebooted and recalibrated in flight during turns of up to 20 degrees.

GMU magnetometer

The GMU magnetometer measures aircraft heading and is a digital version of a traditional compass. It does so through aligning itself with the magnetic flux lines of the earth.

GTX transponder

Either the GTX 32 or GTX 33 transponder can be used in the G1000 system, although the GTX 33 is far more common. The GTX 32 provides standard mode-C replies to ATC interrogations while the GTX 33 provides mode-S bidirectional communications with ATC and therefore can indicate traffic in the area as well as announce itself spontaneously via "squittering" without prior interrogation.

GEA engine/airframe unit

The GEA unit measures a large variety of engine and airframe parameters, including engine RPM, manifold pressure, oil temperature, cylinder head temperature, exhaust gas temperature, and fuel level in each tank. This data is then provided to the integrated avionics units.

GSD data aggregator

The GSD is a data aggregator system included on complex G1000 systems, such as that found on the Embraer Phenom 100. It serves as a point of connection which allows external systems to communicate with the G1000.

Backup systems

As a condition of certification, all aircraft utilizing the G1000 integrated cockpit must have a redundant airspeed indicator, altimeter, attitude indicator, and magnetic compass. In the event of a failure of the G1000 instrumentation, these backup instruments become primary.

In addition, a secondary power source is required to power the G1000 instrumentation for a limited time in the event of a failure of the aircraft's alternator and primary battery.

Certification

The Garmin G1000 is generally certified on new general aviation aircraft, including Beechcraft, Cessna, Diamond, Cirrus, Mooney, Piper, Quest (the Quest Kodiak), [2] and Tiger. In late 2005, Garmin first announced in the G1000 in the Columbia Aircraft Model 400, [3] later sold to Cessna. Garmin announced its first G1000 retrofit program for the Beechcraft C90 King Air in 2007. That same year the Garmin G1000 became a jet platform, as the avionics system for the Cessna Citation Mustang very light jet. Versions of the G1000 are also used in the Embraer Phenom 100 and Embraer Phenom 300, and PiperJet, as well as the Bell SLS helicopter. [4]

Competition

The G1000 competes with the Avidyne Entegra and Chelton FlightLogic EFIS glass cockpits. However, there are significant differences with regard to the features, degree of integration, intuitive aspects of the design, and overall product utility. Note that the Chelton system is not typically found in airplanes that include the less expensive G1000 or Avidyne systems.

In 2009 Garmin introduced the Garmin G500 as a retrofit glass cockpit. [5] The G500 has the majority of the capabilities of the G1000, other than integration with the aircraft engine system.

Advantages and drawbacks

As it has GPS, communication, and radio navigation components built directly into the system, it both consolidates components into a centralized location and, for the same reason, becomes potentially more costly to repair or replace. The system has the potential to reduce downtime as key components, such as the AHRS, ADC and PFD, are modular and easily replaced. The system's design also prevents the failure of a single component from "cascading" through other components.

The G1000 is compatible with the latest enhanced vision system (EVS) technology. Enhanced vision systems use thermal and infrared cameras to see real-time images and help turn obscurants such as bad weather, night time, fog, dust and brownouts into better images that can see 8-10 times farther than the naked eye.

There are some safety concerns with all glass cockpits, such as the failure of the primary flight displays (PFD). The Garmin G1000 system offers a reversionary mode that will present all of the primary flight instrumentation on the remaining display. In addition, there are multiple GPS units, and electronic redundancy incorporated extensively throughout the design of the system.

Training and training resources

Flying any glass cockpit aircraft requires transition training to familiarize the pilot with the aircraft's systems. Transition training is most effective when a pilot prepares ahead of time. [6] Most general aviation manufacturers using the G1000 system have FAA Industry Training Standards (FITS) training programs for pilots transitioning into their airplanes. FAA FITS compliant training is recommended for any pilot transitioning to the G1000 or any other glass cockpit prior to operating the aircraft in instrument meteorological conditions (IMC) or if operating a glass cockpit aircraft for the first time. Glass cockpit aircraft may not be suitable for primary training. [7]

One of the most effective resources for preparing for G1000 transition training include the Garmin simulator software. In addition, some flight schools now have G1000 flight training devices (FTDs) that provide realistic simulation.

All of the most current Garmin G1000 pilot's guides are available from Garmin as free downloads in PDF format. [8]

See also

Related development

Related Research Articles

<span class="mw-page-title-main">Avionics</span> Electronic systems used on aircraft

Avionics are the electronic systems used on aircraft. Avionic systems include communications, navigation, the display and management of multiple systems, and the hundreds of systems that are fitted to aircraft to perform individual functions. These can be as simple as a searchlight for a police helicopter or as complicated as the tactical system for an airborne early warning platform.

<span class="mw-page-title-main">Cockpit</span> Area from which a pilot controls an aircraft or vehicle

A cockpit or flight deck is the area, usually near the front of an aircraft or spacecraft, from which a pilot controls the aircraft.

<span class="mw-page-title-main">Glass cockpit</span> Aircraft instrumentation system consisting primarily of multi-function electronic displays

A glass cockpit is an aircraft cockpit that features electronic (digital) flight instrument displays, typically large LCD screens, rather than the traditional style of analog dials and gauges. While a traditional cockpit relies on numerous mechanical gauges to display information, a glass cockpit uses several multi-function displays driven by flight management systems, that can be adjusted to display flight information as needed. This simplifies aircraft operation and navigation and allows pilots to focus only on the most pertinent information. They are also popular with airline companies as they usually eliminate the need for a flight engineer, saving costs. In recent years the technology has also become widely available in small aircraft.

<span class="mw-page-title-main">Multi-function display</span> Small screen surrounded by multiple soft keys

A multifunction display (MFD) is a small-screen surrounded by multiple soft keys that can be used to display information to the user in numerous configurable ways. MFDs originated in aviation, first in military aircraft, and later were adopted by commercial aircraft, general aviation, automotive use, and shipboard use.

<span class="mw-page-title-main">Piper PA-46</span> Single engine general aviation aircraft family

The Piper PA-46 Malibu and Matrix, now known as the M-Class, are a family of American light aircraft manufactured by Piper Aircraft of Vero Beach, Florida. The aircraft is powered by a single engine and has the capacity for one pilot and five passengers. Early Malibus were all piston-engined, but a turboprop version, introduced as the Malibu Meridian but now called the M500, is also available. Currently, Piper offers the M350, M500, and M600 in the PA-46 family.

<span class="mw-page-title-main">Cirrus SR20</span> Single-engine general aviation aircraft

The Cirrus SR20 is an American piston-engined, four- or five-seat composite monoplane built since 1999 by Cirrus Aircraft of Duluth, Minnesota. The aircraft is the company's earliest type-certified model, earning certification in 1998.

Garmin Ltd. is an American, Swiss-domiciled multinational technology company founded in 1989 by Gary Burrell and Min Kao in Lenexa, Kansas, United States, with headquarters in Olathe, Kansas. Since 2010, the company is legally incorporated in Schaffhausen, Switzerland.

<span class="mw-page-title-main">Cessna 400</span> Single engine general aviation aircraft

The Cessna 400, marketed as the Cessna TTx, is a single-engine, fixed-gear, low-wing general aviation aircraft built from composite materials by Cessna Aircraft. The Cessna 400 was originally built by Columbia Aircraft as the Columbia 400 until December 2007. From 2013, the aircraft was built as the Cessna TTx Model T240.

<span class="mw-page-title-main">Electronic flight instrument system</span> Display system in an aircrafts cockpit which displays flight information electronically

In aviation, an electronic flight instrument system (EFIS) is a flight instrument display system in an aircraft cockpit that displays flight data electronically rather than electromechanically. An EFIS normally consists of a primary flight display (PFD), multi-function display (MFD), and an engine indicating and crew alerting system (EICAS) display. Early EFIS models used cathode ray tube (CRT) displays, but liquid crystal displays (LCD) are now more common. The complex electromechanical attitude director indicator (ADI) and horizontal situation indicator (HSI) were the first candidates for replacement by EFIS. Now, however, few flight deck instruments cannot be replaced by an electronic display.

<span class="mw-page-title-main">Primary flight display</span> Modern aircraft instrument

A primary flight display or PFD is a modern aircraft instrument dedicated to flight information. Much like multi-function displays, primary flight displays are built around a Liquid-crystal display or CRT display device. Representations of older six pack or "steam gauge" instruments are combined on one compact display, simplifying pilot workflow and streamlining cockpit layouts.

<span class="mw-page-title-main">Flight management system</span> Component of aircraft avionics

A flight management system (FMS) is a fundamental component of a modern airliner's avionics. An FMS is a specialized computer system that automates a wide variety of in-flight tasks, reducing the workload on the flight crew to the point that modern civilian aircraft no longer carry flight engineers or navigators. A primary function is in-flight management of the flight plan. Using various sensors (such as GPS and INS often backed up by radio navigation) to determine the aircraft's position, the FMS can guide the aircraft along the flight plan. From the cockpit, the FMS is normally controlled through a Control Display Unit (CDU) which incorporates a small screen and keyboard or touchscreen. The FMS sends the flight plan for display to the Electronic Flight Instrument System (EFIS), Navigation Display (ND), or Multifunction Display (MFD). The FMS can be summarised as being a dual system consisting of the Flight Management Computer (FMC), CDU and a cross talk bus.

<span class="mw-page-title-main">Cirrus SR22</span> Single engine general aviation aircraft

The Cirrus SR22 is a single-engine four- or five-seat composite aircraft built from 2001 by Cirrus Aircraft of Duluth, Minnesota.

<span class="mw-page-title-main">Synthetic vision system</span>

A synthetic vision system (SVS) is a computer-mediated reality system for aerial vehicles, that uses 3D to provide pilots with clear and intuitive means of understanding their flying environment.

In aviation, a flight director (FD) is a flight instrument that is overlaid on the attitude indicator that shows the pilot of an aircraft the attitude required to execute the desired flight path. Flight directors are mostly commonly used during approach and landing. They can be used with or without autopilot systems.

An Air Data Inertial Reference Unit (ADIRU) is a key component of the integrated Air Data Inertial Reference System (ADIRS), which supplies air data and inertial reference information to the pilots' electronic flight instrument system displays as well as other systems on the aircraft such as the engines, autopilot, aircraft flight control system and landing gear systems. An ADIRU acts as a single, fault tolerant source of navigational data for both pilots of an aircraft. It may be complemented by a secondary attitude air data reference unit (SAARU), as in the Boeing 777 design.

Chelton Flight Systems designs and manufactures advanced avionics and flight controls. Based in Boise, Idaho, Chelton Flight Systems originally started out as Sierra Flight Systems. The company was co-founded by Gordon Pratt and Rick Price in 1997. It is part of Genesys Aerosystems since 2014.

<span class="mw-page-title-main">Avidyne Entegra</span> Electronic flight instrument system

Avidyne Entegra is an integrated aircraft instrumentation system, produced by Avidyne Corporation, consisting of a primary flight display (PFD), and multi-function display (MFD). Cirrus became the first customer of the Entegra system and began offering it on the SR20 and SR22 aircraft in 2003 as the first integrated flight deck for light general aviation (GA). The original Entegra system was designed to use third-party components such as a GPS from Garmin and an autopilot system from S-TEC Corporation.

<span class="mw-page-title-main">Evektor SportStar</span> Czech light sport aircraft

The SportStar and EuroStar are a family of a two-seat, light sport aircraft (LSA), manufactured by Evektor-Aerotechnik of the Czech Republic and powered by a Rotax 912ULS, 100 horsepower (75 kW) engine.

L-3 SmartDeck - is a fully integrated cockpit system originally developed by L-3 Avionics Systems. and acquired in 2010 by Esterline CMC Electronics through an exclusive licensing agreement.

An integrated standby instrument system (ISIS) is an electronic aircraft instrument. It is intended to serve as backup in case of a failure of the standard glass cockpit instrumentation, allowing pilots to continue to receive key flight-related information. Prior to the use of ISIS, this was performed by individual redundant mechanical instrumentation instead. Such systems have become common to be installed in various types of aircraft, ranging from airliners to helicopters and smaller general aviation aircraft. While it is common for new-built aircraft to be outfitted with ISIS, numerous operators have opted to have their fleets retrofitted with such apparatus as well.

References

  1. "Happy Birthday Garmin G1000 – 10 Years |" . Retrieved 2022-06-05.
  2. "Link Archived 2010-09-01 at the Wayback Machine "
  3. "Aero-News Alert: Columbia Announces G1000-Equipped Columbias with 'Ready Pad' | Aero-News Network".
  4. "Bell Helicopter to Equip New Short Light Single Aircraft with Garmin G1000H Integrated Avionics System" Textron PR, September 24, 2013. Accessed: December 11, 2013.
  5. "Garmin® Reveals G500 All-Glass Cockpit for Part 23 Class I/II Aircraft | Garmin Newsroom". newsroom.garmin.com. Archived from the original on 2019-10-26. Retrieved 2017-09-12.
  6. "Technically Advanced Aircraft Safety and Training" (PDF). AOPA Air Safety Foundation. Archived from the original (PDF) on 2009-04-19. Retrieved 2009-06-14.
  7. "Broken Glass". AOPA Air Safety Foundation. 2 May 2009. Retrieved 2021-08-04.
  8. "Garmin – Manuals". Garmin.com. Retrieved 2020-07-16.