Gravity train

Last updated

Ceres gravity train concept. Mining the asteroid belt could use gravity trains to haul raw material to a central refining point and launch point / space elevator Ceres gravity train.webp
Ceres gravity train concept. Mining the asteroid belt could use gravity trains to haul raw material to a central refining point and launch point / space elevator

A gravity train is a theoretical means of transportation for purposes of commuting between two points on the surface of a sphere, by following a straight tunnel connecting the two points through the interior of the sphere.

Contents

In a large body such as a planet, this train could be left to accelerate using just the force of gravity, since during the first half of the trip (from the point of departure until the middle), the downward pull towards the center of gravity would pull it towards the destination. During the second half of the trip, the acceleration would be in the opposite direction relative to the trajectory, but, ignoring the effects of friction, the speed acquired before would overcome this deceleration, and as a result, the train's speed would reach zero at approximately the moment the train reached its destination. [1] [ better source needed ]

Origin of the concept

In the 17th century, British scientist Robert Hooke presented the idea of an object accelerating inside a planet in a letter to Isaac Newton. A gravity train project was seriously presented to the French Academy of Sciences in the 19th century. The same idea was proposed, without calculation, by Lewis Carroll in 1893 in Sylvie and Bruno Concluded . The idea was rediscovered in the 1960s when physicist Paul Cooper published a paper in the American Journal of Physics suggesting that gravity trains be considered for a future transportation project. [2]

Mathematical considerations

Under the assumption of a spherical planet with uniform density, and ignoring relativistic effects as well as friction, a gravity train has the following properties: [3]

For gravity trains between points which are not the antipodes of each other, the following hold:

On the planet Earth specifically, since a gravity train's movement is the projection of a very-low-orbit satellite's movement onto a line, it has the following parameters:

To put some numbers in perspective, the deepest current bore hole is the Kola Superdeep Borehole with a true depth of 12,262 meters; covering the distance between London and Paris (350 km) via a hypocycloidical path would require the creation of a hole 111,408 metres deep. Not only is such a depth nine times as great, but it would also necessitate a tunnel that passes through the Earth's mantle.

Mathematical derivation

Using the approximations that the Earth is perfectly spherical and of uniform density , and the fact that within a uniform hollow sphere there is no gravity, the gravitational acceleration experienced by a body within the Earth is proportional to the ratio of the distance from the center to the Earth's radius . This is because underground at distance from the center is like being on the surface of a planet of radius , within a hollow sphere which contributes nothing.

On the surface, , so the gravitational acceleration is . Hence, the gravitational acceleration at is

Diametric path to antipodes

In the case of a straight line through the center of the Earth, the acceleration of the body is equal to that of gravity: it is falling freely straight down. We start falling at the surface, so at time (treating acceleration and velocity as positive downwards):

Differentiating twice:

where . This class of problems, where there is a restoring force proportional to the displacement away from zero, has general solutions of the form , and describes simple harmonic motion such as in a spring or pendulum.

In this case so that , we begin at the surface at time zero, and oscillate back and forth forever.

The travel time to the antipodes is half of one cycle of this oscillator, that is the time for the argument to to sweep out radians. Using simple approximations of that time is

Straight path between two arbitrary points

Path of gravity train GravTrainTangent1.png
Path of gravity train

For the more general case of the straight line path between any two points on the surface of a sphere we calculate the acceleration of the body as it moves frictionlessly along its straight path.

The body travels along AOB, O being the midpoint of the path, and the closest point to the center of the Earth on this path. At distance along this path, the force of gravity depends on distance to the center of the Earth as above. Using the shorthand for length OC:

The resulting acceleration on the body, because is it on a frictionless inclined surface, is :

Diagram of forces on a gravity train on non-diametrical straight line path GravTrainTangent2.png
Diagram of forces on a gravity train on non-diametrical straight line path

But is , so substituting:

which is exactly the same for this new , distance along AOB away from O, as for the in the diametric case along ACD. So the remaining analysis is the same, accommodating the initial condition that the maximal is the complete equation of motion is

The time constant is the same as in the diametric case so the journey time is still 42 minutes; it's just that all the distances and speeds are scaled by the constant .

Dependence on radius of planet

The time constant depends only on so if we expand that we get

which depends only on the gravitational constant and the density of the planet. The size of the planet is immaterial; the journey time is the same if the density is the same.

In fiction

In the 2012 movie Total Recall , a gravity train called "The Fall" goes through the center of the Earth to commute between Western Europe and Australia. [5] [6]

See also

Related Research Articles

<span class="mw-page-title-main">Simple harmonic motion</span> To-and-fro periodic motion in science and engineering

In mechanics and physics, simple harmonic motion is a special type of periodic motion an object experiences by means of a restoring force whose magnitude is directly proportional to the distance of the object from an equilibrium position and acts towards the equilibrium position. It results in an oscillation that is described by a sinusoid which continues indefinitely.

<span class="mw-page-title-main">Spherical coordinate system</span> Coordinates comprising a distance and two angles

In mathematics, a spherical coordinate system is a coordinate system for three-dimensional space where the position of a given point in space is specified by three real numbers: the radial distancer along the radial line connecting the point to the fixed point of origin; the polar angleθ between the radial line and a given polar axis; and the azimuthal angleφ as the angle of rotation of the radial line around the polar axis. (See graphic regarding the "physics convention".) Once the radius is fixed, the three coordinates (r, θ, φ), known as a 3-tuple, provide a coordinate system on a sphere, typically called the spherical polar coordinates. The plane passing through the origin and perpendicular to the polar axis (where the polar angle is a right angle) is called the reference plane (sometimes fundamental plane).

<span class="mw-page-title-main">Navier–Stokes equations</span> Equations describing the motion of viscous fluid substances

The Navier–Stokes equations are partial differential equations which describe the motion of viscous fluid substances. They were named after French engineer and physicist Claude-Louis Navier and the Irish physicist and mathematician George Gabriel Stokes. They were developed over several decades of progressively building the theories, from 1822 (Navier) to 1842–1850 (Stokes).

<span class="mw-page-title-main">Tautochrone curve</span> Curve for which the time to roll to the end is equal for all starting points

A tautochrone curve or isochrone curve is the curve for which the time taken by an object sliding without friction in uniform gravity to its lowest point is independent of its starting point on the curve. The curve is a cycloid, and the time is equal to π times the square root of the radius over the acceleration of gravity. The tautochrone curve is related to the brachistochrone curve, which is also a cycloid.

In fluid dynamics, Stokes' law is an empirical law for the frictional force – also called drag force – exerted on spherical objects with very small Reynolds numbers in a viscous fluid. It was derived by George Gabriel Stokes in 1851 by solving the Stokes flow limit for small Reynolds numbers of the Navier–Stokes equations.

<span class="mw-page-title-main">Stellar dynamics</span> Branch of astrophysics

Stellar dynamics is the branch of astrophysics which describes in a statistical way the collective motions of stars subject to their mutual gravity. The essential difference from celestial mechanics is that the number of body

Particle displacement or displacement amplitude is a measurement of distance of the movement of a sound particle from its equilibrium position in a medium as it transmits a sound wave. The SI unit of particle displacement is the metre (m). In most cases this is a longitudinal wave of pressure, but it can also be a transverse wave, such as the vibration of a taut string. In the case of a sound wave travelling through air, the particle displacement is evident in the oscillations of air molecules with, and against, the direction in which the sound wave is travelling.

The surface gravity, g, of an astronomical object is the gravitational acceleration experienced at its surface at the equator, including the effects of rotation. The surface gravity may be thought of as the acceleration due to gravity experienced by a hypothetical test particle which is very close to the object's surface and which, in order not to disturb the system, has negligible mass. For objects where the surface is deep in the atmosphere and the radius not known, the surface gravity is given at the 1 bar pressure level in the atmosphere.

In classical mechanics, the shell theorem gives gravitational simplifications that can be applied to objects inside or outside a spherically symmetrical body. This theorem has particular application to astronomy.

In theoretical physics, Nordström's theory of gravitation was a predecessor of general relativity. Strictly speaking, there were actually two distinct theories proposed by the Finnish theoretical physicist Gunnar Nordström, in 1912 and 1913 respectively. The first was quickly dismissed, but the second became the first known example of a metric theory of gravitation, in which the effects of gravitation are treated entirely in terms of the geometry of a curved spacetime.

<span class="mw-page-title-main">Multiple integral</span> Generalization of definite integrals to functions of multiple variables

In mathematics (specifically multivariable calculus), a multiple integral is a definite integral of a function of several real variables, for instance, f(x, y) or f(x, y, z).

A theoretical motivation for general relativity, including the motivation for the geodesic equation and the Einstein field equation, can be obtained from special relativity by examining the dynamics of particles in circular orbits about the Earth. A key advantage in examining circular orbits is that it is possible to know the solution of the Einstein Field Equation a priori. This provides a means to inform and verify the formalism.

The Mason–Weaver equation describes the sedimentation and diffusion of solutes under a uniform force, usually a gravitational field. Assuming that the gravitational field is aligned in the z direction, the Mason–Weaver equation may be written

Alternatives to general relativity are physical theories that attempt to describe the phenomenon of gravitation in competition with Einstein's theory of general relativity. There have been many different attempts at constructing an ideal theory of gravity.

In mathematics, vector spherical harmonics (VSH) are an extension of the scalar spherical harmonics for use with vector fields. The components of the VSH are complex-valued functions expressed in the spherical coordinate basis vectors.

<span class="mw-page-title-main">Spherical sector</span> Intersection of a sphere and cone emanating from its center

In geometry, a spherical sector, also known as a spherical cone, is a portion of a sphere or of a ball defined by a conical boundary with apex at the center of the sphere. It can be described as the union of a spherical cap and the cone formed by the center of the sphere and the base of the cap. It is the three-dimensional analogue of the sector of a circle.

In geodesy and geophysics, theoretical gravity or normal gravity is an approximation of Earth's gravity, on or near its surface, by means of a mathematical model. The most common theoretical model is a rotating Earth ellipsoid of revolution.

The Ellis drainhole is the earliest-known complete mathematical model of a traversable wormhole. It is a static, spherically symmetric solution of the Einstein vacuum field equations augmented by inclusion of a scalar field minimally coupled to the geometry of space-time with coupling polarity opposite to the orthodox polarity :

The Ellis wormhole is the special case of the Ellis drainhole in which the 'ether' is not flowing and there is no gravity. What remains is a pure traversable wormhole comprising a pair of identical twin, nonflat, three-dimensional regions joined at a two-sphere, the 'throat' of the wormhole. As seen in the image shown, two-dimensional equatorial cross sections of the wormhole are catenoidal 'collars' that are asymptotically flat far from the throat. There being no gravity in force, an inertial observer can sit forever at rest at any point in space, but if set in motion by some disturbance will follow a geodesic of an equatorial cross section at constant speed, as would also a photon. This phenomenon shows that in space-time the curvature of space has nothing to do with gravity.

In Einstein's theory of general relativity, the interior Schwarzschild metric is an exact solution for the gravitational field in the interior of a non-rotating spherical body which consists of an incompressible fluid and has zero pressure at the surface. This is a static solution, meaning that it does not change over time. It was discovered by Karl Schwarzschild in 1916, who earlier had found the exterior Schwarzschild metric.

References

  1. Newton, Isaac. Philosophiæ Naturalis Principia Mathematica.
  2. "To Everywhere in 42 Minutes". Time. February 11, 1966.
  3. Robin Davis: A Physicist's Pipe Dream
  4. Klotz, Alexander R. (2015). "The gravity tunnel in a non-uniform Earth". American Journal of Physics. 83 (3): 231–237. arXiv: 1308.1342 . Bibcode:2015AmJPh..83..231K. doi:10.1119/1.4898780. S2CID   118572386.
  5. Martinez, Jason (August 13, 2012). "The Science of Total Recall". Wolfram-Alpha Blog. Retrieved March 30, 2018.
  6. Rothman, Lily (August 6, 2012). "Spoiler Alert: The 8,000-Mile Hole in Total Recall". Time . Retrieved March 30, 2018.