HMS Driver (1840)

Last updated

HMS Driver.jpg
HMS Driver
History
Naval Ensign of the United Kingdom.svgUnited Kingdom
NameHMS Driver
Ordered12 March 1840
Builder Portsmouth Dockyard
Cost£39,707
Laid downJune 1840
Launched24 December 1840
Commissioned5 November 1841
FateWrecked on 3 August 1861
General characteristics [1]
Class and type Driver-class wooden paddle sloop
Displacement1,590 tons
Tons burthen1,055 62/94 bm
Length180 ft (54.9 m) (gundeck)
Beam36 ft (11.0 m)
Depth of hold21 ft (6.4 m)
Installed power280 nhp
Propulsion
  • Seaward & Capel 2-cylinder direct-acting steam engine
  • Paddles
Sail plan Brig-rigged
Complement149 (later 160)
Armament
  • As built:
  • 2 × 10-inch/42-pounder (84 cwt) pivot guns
  • 2 × 68-pounder guns (64 cwt)
  • 2 × 42-pounder (22 cwt) guns
  • After 1856:
  • 1 × 110 pdr Armstrong gun
  • 1 × 68-pounder (95 cwt) gun
  • 4 × 32-pounder (42 cwt) guns

HMS Driver was a Driver-class wooden paddle sloop of the Royal Navy. She is credited with the first global circumnavigation by a steamship when she arrived back in England on 14 May 1847. [2] [3]

Contents

Construction and commissioning

Driver was ordered on 12 March 1840 from Portsmouth Dockyard to a design by Sir William Symonds. She was laid down in June 1840 and launched on 24 December 1840, with her machinery being supplied by Seaward & Capel of Limehouse, Woolwich. Her hull cost £19,433, with the machinery costing another £13,866. After she had completed fitting out, at a further cost of £6,408, she was commissioned on 5 November 1841.

Career

Driver was driven ashore at Steel Point, Yorkshire, on 28 November 1841, and was later refloated. [4] She embarked for the East Indies and China in March 1842. She served some time in China (losing her original commanding officer) before being ordered to New Zealand in September 1845. She was damaged by a storm en route, necessitating repairs to her engine and boiler and other parts of the ship. [3]

During her circumnavigation Driver became the first steamship to visit New Zealand, arriving on 20 January 1846, [5] and was involved in the Hutt Valley Campaign, which was part of the New Zealand Wars. At the time of her visit she was described as a brig-rigged 6-gun warship displacing 1,058 tons with engines rated 280 horsepower. [6]

Driver set off east from New Zealand for her return journey to England via Cape Horn on 28 January 1847. She stopped for six days in Argentina to pick up more coal, finally arriving in Portsmouth, England on Friday 14 May 1847, 105 days after starting from New Zealand. Of the ship's original officers, the second in command Lieutenant Thomas Kisbee, the master, purser, surgeon and assistant surgeon completed the entire circumnavigation. [3]

On 11 March 1850 she was docked in Victoria Harbour to witness Richard Blanshard assume the Governorship of the newly formed Colony of Vancouver Island, and issued a seventeen-gun salute. [7]

Fate

She was wrecked on 3 August 1861 on Mayaguana Island, the most easterly of the Bahamas, in the West Indies. [1] She was on a voyage from Bermuda to Jamaica. [8]

Citations

  1. 1 2 Winfield (2014), p. 160.
  2. History Channel: This day in history - May 14 Archived 13 May 2008 at the Wayback Machine
  3. 1 2 3 "Arrival Of The Driver Steam-Sloop From New Zealand" . London Standard. p. 4 via British Newspaper Archive.
  4. "Ship News". The Times. No. 17843. London. 2 December 1841. col C, p. 7.
  5. New Zealand Maritime Museum Archived 5 January 2009 at the Wayback Machine
  6. New Zealand Electronic Text Centre
  7. "City of Victoria - History". Archived from the original on 15 April 2009. Retrieved 3 February 2010.
  8. "Shipping Intelligence". Liverpool Mercury etc. No. 4233. Liverpool. 5 September 1861.

Related Research Articles

HMS <i>Plumper</i> (1848) Sloop of the Royal Navy

HMS Plumper was part of the 1847 Program, she was ordered on the 25 of April as a steam schooner from Woolwich Dockyard with the name Pincher. However, the reference Ships of the Royal Navy, by J.J. College, (c) 2020 there is no entry that associates this name to this build. The vessel was reordered on August 12 as an 8-gun sloop as designed by John Fincham, Master Shipwright at Portsmouth. Launched in 1848, she served three commissions, firstly on the West Indies and North American Station, then on the West Africa Station and finally in the Pacific Station. It was during her last commission as a survey ship that she left her most enduring legacy; in charting the west coast of British Columbia she left her name and those of her ship's company scattered across the charts of the region. She paid off for the last time in 1861 and was finally sold for breaking up in 1865.

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Fly</i> (1831) Sloop of the Royal Navy

HMS Fly was an 18-gun sloop of the Royal Navy. She was responsible for the exploration and charting of much of Australia's north-east coast and nearby islands. She was converted to a coal hulk in 1855 and broken up in 1903.

HMS <i>Miranda</i> (1851) Sloop of the Royal Navy

HMS Miranda was a 14-gun wooden screw sloop of the Royal Navy. As part of the 1847 Program, she was designed by John Fincham, Master Shipwright of Portsmouth and is considered an improved Rattler with the design approved on 3 November 1847. She was ordered on the 25th of April 1847 with the name Grinder from Royal Dockyard, Sheerness. On the 3rd of November 1847 she was reordered as the Miranda from Sheerness Dockyard. Launched in 1851, she was completed to see action in the Russian War of 1854 - 55. In 1854 she was in the White Sea and participated in the bombardment of the Port of Kola. She then participated in the Sea of Azov during 1855. Two of her crew were awarded the Victoria Cross for their bravery. Towards the end of her career she transported troops during the New Zealand war. She was reclassified as a corvette by 1862, She was sold for breaking in December 1869.

HMS <i>Acheron</i> (1838) Sloop of the Royal Navy

HMS Acheron was the last Hermes-class wooden paddle sloop ordered for the Royal Navy. She was launched at Sheerness in 1838. She spent two commissions in the Mediterranean before being reclassed as a survey ship in 1847. Between 1848 and 1851 she made a coastal survey of New Zealand, the first such survey since Captain Cook. She was paid off at Sydney and was tender to HMS Calliope. She was sold at Sydney in 1855.

HMS <i>Salamander</i> (1832) Sloop of the Royal Navy

HMS Salamander was one of the initial steam powered vessels built for the Royal Navy. On 10 January 1831 the First Sea Lord gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Joseph Seaton, the Master Shipwright of Sheerness, she was initially slated to be built in Portsmouth, and was changed to Sheerness Dockyard. She was launched and completed in 1832, took part in the Second Anglo-Burmese War and was broken up in 1883.

HMS <i>Virago</i> (1842)

HMS Virago was a Royal Navy Driver-class wooden paddle sloop launched on 25 July 1842 from Chatham Dockyard.

HMS <i>Malacca</i> (1853) Sloop of the Royal Navy

HMS Malacca was a 17-gun wooden sloop of the Royal Navy. She was ordered on 9 November 1847 from Moulmein, Burma to be built of teak. As a Surveyor's Department design, Malacca was based on the Conflict designed sloop which was approved on 9 December 1848. After launching in April 1853 she was commissioned the following month to be sailed to England for the fitting of her engine. She entered British Naval service in 1854 and served three commissions including action in the Russian War 1854 - 55 before being sold in 1869. Her resale to Japan, she served in the Japanese Navy as a training ship until broken in 1906.

HMS <i>Hermes</i> (1835) Sloop of the Royal Navy

HMS Hermes was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. Initially she was used as apackey vessel until her guns were upgraded. She was re-engined and lengthened in 1842 to 43. She spent time on various stations in the Empire. She participated in the storming of Rangoon during the Second Burmese War. She was sold for breaking in October 1864.

HMS <i>Wasp</i> (1850) Sloop of the Royal Navy

HMS Wasp was an Archer type sloop ordered on 25 April 1847 from Deptford Dockyard. Two references stipulate that Parthian, ordered with Archer the year prior was renamed Wasp when ordered as a sloop. However, Parthian remained on the books at Deptford, as a Rifleman type gunvessel until cancelled in June 1849. Therefore Wasp was a new build. She served on many different stations during her career, including West Coast of Africa, in the Mediterranean and Black Sea during the Russian War of 1854 - 55, on the South East Coast of America, Cape of Good Hope where she went aground twice and the East Indies before being sold for breaking in December 1869.

HMS Medea was one of the initial steam-powered vessels built for the Royal Navy. On 10 January 1831 the new First Lord Sir James Graham gave orders that four paddle vessels be built to competitive designs. The vessels were to be powered by Maudslay, Son & Field steam engines, carry a schooner rig and mount one or two 10-inch shell guns. Initially classed simply as a steam vessel (SV), she was re-classed as a second-class steam sloop when that categorization was introduced on 31 May 1844. Designed by Oliver Lang, the master shipwright of Woolwich. She was launched and completed in 1834, took part in the Syrian Coast Campaign and was broken up in 1867.

HMS Volcano was a Hermes-class wooden paddle sloop of the Royal Navy. She was built at Portsmouth Dockyard. She was launched in 1836. Her first few commissions were on packet service in the Mediterranean and North American and West Indies Stations and on the anti-slavery patrol on the West Coast of Africa. In 1854 she was converted to a factory ship and served in the Baltic during the Russian War. She was sent to China during the Second Opium War as a factory ship. On her return she was assigned to Portsmouth, on Harbour Service as a stationary factory ship. She remained there until sold for breaking in 1894.

HMS Stromboli was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Portsmouth. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was used as a troop transport in the Baltic in 1854, she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was on the South East Coast of America. She was sold for breaking in August 1866.

HMS Vesuvius was initially a Steam Vessel second class designed by Sir William Symonds, Surveyor of the Navy, and built at Sheerness. She was commissioned and participated in the bombardment of Acre in 1840, during the Russian War she was in the Black Sea and the Sea of Azov in 1855. Her last overseas posting was in the West Indies. She was sold for breaking in June 1865.

HMS Alecto was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, prior to her tug of war with the Rattler. She spent her time in the Americas and mainly on the anti-slavery patrol off the west coast of Africa. She was broken in November 1865

HMS Polyphemus was an Alecto-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally classed as a steam vessel (SV3), her classification would be changed to a Third Class Sloop. She initially served in the Mediterranean, west coast of Africa and the Baltic. She was wrecked on the Baltic side Jutland on 29 January 1856.

HMS Inflexible was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the East Indies and participated in the last year of the New Zealand War of 1845 to 1847. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

HMS Scourge was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. She was initially commissioned for service with the Channel Squadron before moving to the North America and West Indies Station. She then served in the Mediterranean then the west coast of Africa. Her final service was in the Mediterranean. She was broken in 1865.

HMS <i>Bulldog</i> (1845) Sloop of the Royal Navy

HMS Bulldog was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. Originally she was ordered as a Driver-class sloop, however, under Admiralty Order of 26 December 1843 she was directed to be built to a new specification. After commissioning she sailed for the Cape of Good Hope. She then was in the Baltic Sea for the Russian War. She carried out ocean sounding for the Atlantic telegraph. She was lost while in action with the Haitians in 1865.

HMS Fury was a Bulldog-class sloop designed by Sir William Symonds, Surveyor of the Navy. She was ordered on 19 February 1844. After commissioning she sailed for the East Indies and participated in action against pirate junks near Vietnam. She then was in the Black Sea for the Russian War followed by the Second Opium War with China. She was sold for breaking in July 1864.

References