Hanriot H.230

Last updated
Hanriot H.230
Hanriot 232 right front L'Aerophile March 1940.jpg
H.232
RoleAdvanced trainer
Manufacturer SNCAC
DesignerHanriot
First flightJune 1937
IntroductionFebruary 1940
Retired1945
Primary users French Air Force
Luftwaffe
Finnish Air Force
Produced1940
Number built35
Developed fromHanriot H.220

The Hanriot H.230 was a French twin-engined advanced trainer. The construction of the aircraft was initiated in 1936 by Hanriot's chief designer Montlaur. The aircraft was produced by the nationalized factory SNCAC.

Contents

History

The prototype H.230.01, made its first flight in June 1937. The aircraft resembled its predecessor, the H.220 fighter-bomber, but had a lightened and simplified structure.

The H.230.01 was powered by two 128 kW (172 hp) Salmson 6Af engines and its configuration included a short crew canopy faired into the upper decking of the rear fuselage and a conventional strut-braced tail unit, and the fixed main landing gear units incorporated spatted wheel fairings. During further tests it was decided to introduce considerable dihedral at the wingtips to improve stability, but the H.231.01 which followed in May 1938 had dihedral increased over the whole wing span, and the unusual wingtip arrangement of the modified H.230 was eliminated. Twin fins and rudders were introduced and the power was increased with new 172 kW (230 hp) Salmson 6Af-02 engines.

The Hanriot H.232.01 had a single fin and rudder and was equipped with twin 164 kW (220 hp) Renault 6Q-02/03, (left and right hand propeller rotation), engines plus retractable landing gear. The H.232.02, which made its maiden flight in August 1938, introduced a redesigned cockpit. The aircraft was tested between October 1938 and May 1939. The type was then given a twin fin and rudder tail assembly and was flown in this new configuration in December 1939, then redesignated H.232/2.01.

The French Air Ministry made an initial order of 40 H.232.2s. This order was though soon was extended to 57. The French Air Force started to receive their H-232.2s in February, 1940, and received a total of 35 before the defeat against the Germans in June 1940. The Germans captured 22 aircraft of this type, and since they did not have any use of them, Finland placed an order for three aircraft from the Germans. One was destroyed in an accident during the ferry flight to Finland, the other two saw service as advanced trainers in the Finnish Air Force and were written off on January 2, 1950. During the Winter War the French had planned to send 25 aircraft of this type to Finland. The German aircraft were scrapped in 1942.[ citation needed ]

Variants

H.230
Twin-engined trainer derived from the Hanriot H.220, powered by 2x 128 kW (172 hp) Salmson 6Af engines, one built.
H.231
Further development, powered by two 2x 172 kW (230 hp) Salmson 6Af-02 engines, two built.
H.232
Production prototype with single fin and rudder replacing earlier twin fins, powered by two Renault 6Q-02/03 engines.
SNCAC NC.232/2
Production aircraft, 57 ordered but only 35 delivered before the fall of France in 1940. Three delivered to Finland (one written off on the delivery flight).
SNCAC NC-600
Further development of the H.232 curtailed by the German invasion in 1940.

Operators

Flag of Finland.svg  Finland
Flag of France.svg  France
Flag of Germany (1935-1945).svg  Germany

Specifications (SNCAC NC-232.2)

Hanriot 232 3-view drawing from L'Aerophile September 1938 Hanriot 232 3-view L'Aerophile September 1938.jpg
Hanriot 232 3-view drawing from L'Aerophile September 1938

Data fromAviafrance : SNCAC NC-232.2 [1]

General characteristics

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Farman F.220</span> Type of aircraft

The Farman F.220 and its derivatives were thick-sectioned, high-winged, four engined French monoplanes from Farman Aviation Works. Based on the push-pull configuration proven by the F.211, design started in August 1925 and the first flight of the prototype was on 26 May 1932. The largest bomber to serve in France between the two world wars was the final F.222 variant. One variation was intended to be an airliner.

<span class="mw-page-title-main">Salmson air-cooled aero-engines</span>

Between 1920 and 1951 the Société des Moteurs Salmson in France developed and built a series of widely used air-cooled aircraft engines.

<span class="mw-page-title-main">Gnome-Rhône 14M</span> 1930s French piston aircraft engine

The Gnome-Rhône 14M was a small 14-cylinder two-row air-cooled radial engine that was used on several French and German aircraft of World War II. While having the same appearance, number of pistons (14) and two-row layout typical of Gnome-Rhône radial engines, the 14M was built to a smaller frame intended to power a lighter class of aircraft. It was designed with lower displacement and power, smaller in size and with less weight compared to the larger, heavier Gnome-Rhône 14N and its well-known predecessor.

<span class="mw-page-title-main">Farman F.430</span> Type of aircraft

The Farman F.430 was a 1930s French light transport designed and built by the Farman Aviation Works. Two variants with different engines were known as the F.431 and F.432.

<span class="mw-page-title-main">Nord Noralpha</span> Type of aircraft

The Nord 1100 Noralpha was a French-built and re-engined Messerschmitt Bf 108 produced by Nord Aviation.

<span class="mw-page-title-main">Hanriot H.43</span> Type of aircraft

The Hanriot H.43 was a military utility aircraft produced in France in the late 1920s and early 1930s which was primarily used by the Aéronautique Militaire as a trainer. While Hanriot had spent most of the 1920s manufacturing further and further developments of the HD.14 that had flown in 1920, the H.43 was an entirely new design. It was a conventional single-bay biplane with staggered wings of unequal span and a fuselage of fabric-covered metal tube. Accommodation for the pilot and passenger was in tandem, open cockpits and the main units of the fixed, tailskid undercarriage were linked by a cross-axle.

<span class="mw-page-title-main">Hanriot H.180</span> Type of aircraft

The Hanriot H.170, H.180, and H.190 were a family of light utility aircraft produced in France in the 1930s. All introduced in 1934, they appeared side by side at the Paris Air Show that year, the model numbers distinguishing between versions powered by Salmson, Renault, and Régnier engines respectively.

<span class="mw-page-title-main">Farman NC.470</span> Type of aircraft

The Farman NC.470 was a French twin-engined floatplane designed as a crew trainer for the French Navy. It was used in small numbers for both its intended role as a trainer and as a coastal reconnaissance aircraft at the start of World War II.

<span class="mw-page-title-main">Potez 661</span> Type of aircraft

The Potez 661 was a four-engined metal low-wing monoplane airliner developed in France just before World War II. The single example flew with Air Afrique on French colonial routes.

The Dewoitine HD.730 was a prototype French reconnaissance floatplane of the 1940s. It was a single-engined, low-wing monoplane that was designed as a catapult-launched reconnaissance aircraft to operate from warships of the French Navy. Two flew in 1940, and a third aircraft was built to a modified design in 1941, but no production followed.

The Yakovlev UT-3, initially known as the AIR-17 and then Ya-17, was a twin-engine low-wing monoplane aircraft designed by Alexander Sergeyevich Yakovlev for the Soviet Air Force (VVS).

<span class="mw-page-title-main">SNCAC NC.4-10</span> Type of aircraft

The SNCAC NC.4-10 was a twin-engine floatplane torpedo bomber built in France in the late 1930s. It was one of several prototypes competing for a Navy specification but no contracts were awarded after the military lost interest in the type.

The SNCAC NC.130 was a French high-altitude research aircraft of the 1930s. A single example flew in 1939, but was destroyed during the Second World War.

<span class="mw-page-title-main">SNCAC NC-600</span> Type of aircraft

The SNCAC NC-600 was a prototype French twin-engined long-range fighter aircraft, developed by SNCAC from the earlier Hanriot H.220 fighter. The type never entered service, with development being ended by the French surrender in June 1940.

<span class="mw-page-title-main">SNCAC NC.510</span> Type of aircraft

The SNCAC NC.510 was a twin-engine French reconnaissance, army co-operation or advanced training aircraft, built in the late 1930s. Three were built and refined but production orders were not forthcoming.

<span class="mw-page-title-main">Renault 6Q</span> 1930s French piston aircraft engine

The Renault 6Q, also called the Renault Bengali 6, is an air-cooled inverted in-line six-cylinder, aircraft piston engine, producing about 160 kW (220 hp) continuous power. It was designed and built in France and produced for more than ten years after its homologation in 1936, with large numbers built during World War II.

<span class="mw-page-title-main">SFCA Lignel 20</span> 1930s French racing aircraft

The SFCA Lignel 20 was a French, single engine, low wing monoplane, one of a series of this type built by SFCA in the 1930s. It was capable of aerobatics but was primarily a racing aircraft.

<span class="mw-page-title-main">Hanriot H.46 Styx</span> Type of aircraft

The Hanriot H.46 Styx was a French, single-engined, parasol wing aircraft which could equally be configured for training, liaison or ambulance roles; in the latter form it was able to accept a patient on a stretcher. Several different engines were fitted and flown but the type did not reach production.

The Morane-Saulnier MS.152 was a French multi-purpose aircraft built in 1928. It did not go into production.

<span class="mw-page-title-main">Renault 12R</span> 1930s French piston aircraft engine

The Renault 12R was an air-cooled inverted V12 aircraft engine developed by the French engineering company Renault in the 1930s. The design was based on mounting two 6Q six-cylinder engines on a single crankshaft. In production, the engine was rated between 450 and 500 hp, although a high performance version built for the sole Caudron C.712 racing special produced 730 hp (540 kW). More than one third of production went to power the Caudron C.714 light fighter that fought in the early stages of World War II for the French and Polish Air Forces.

References

  1. Parmentier, Bruno. "S.N.C.A.C. NC-232.2" (in French). Retrieved 2007-01-17.

Bibliography