| Lorraine-Hanriot LH.21S | |
|---|---|
 | |
| Role | Air ambulance |
| National origin | France |
| Manufacturer | Lorraine-Hanriot |
| First flight | c. autumn 1930 |
| Number built | 2 |
The Lorraine-Hanriot LH.21S was designed and built in 1930 to meet a French government requirement for a small air ambulance capable of operating in the colonies. It did not reach production.
Around 1930 there was a French interest in small aircraft capable of evacuating a single ill or wounded patient to hospital from roughly prepared sites in the colonies. The Potez 42 and the Guillemin JG.40 were examples of the category and the Lorraine-Hanriot LH.21S was another. They posed several design challenges, principally around the need for a large, clear internal space for the patient, with easy ground access from a stretcher. [1]
In order to assist side access for the patient, both the Guillemin and the Lorraine-Hanriot had high-set wings, the latter's in parasol configuration. The wing was in two parts, each with a rectangular plan inner section occupying about 40% of the span and a straight-tapered outer part which ended in rounded tips. The outer regions also tapered in thickness from below, providing mild dihedral, and their trailing edges were almost entirely filled by narrow chord, unbalanced ailerons. The wing was a wholly wooden structure built around two box spars and covered with plywood. The upper fuselage was attached to the wing by pairs of N-form struts to the wing spars at about 30% span. Two lighter, transverse, inverted-V cabane struts, which shared fuselage attachment points with the main struts, supported the wing centre. [2]
In contrast to the wooden wing, the flat-sided fuselage was all-metal, with a dural tube structure. It was dural skinned apart from an easily removable section over the rear of the patient's compartment which enabled it be rapidly reconfigured to take a seated passenger. Stretcher access to this space was via a port-side door about 2.25 m (7 ft 5 in) long. Inside there were elastic supports for the stretcher, a fan and a 300 Watt heater. The pilot's open cockpit was immediately ahead of the patient's compartment and under the mid-chord of the wing, where a small, rectangular opening provided an upward field of view. He had a small, port-side door to allow a parachute escape. [2]
The Lorraine-Hanriot was powered by an uncowled five-cylinder 89 kW (120 hp) Lorraine 5Pc radial engine. It had fixed landing gear, with each mainwheel on a cranked axle assisted by a trailing drag strut, both hinged on the central fuselage underside. Tall, inward-leaning oleo struts were mounted from the same upper fuselage point as the forward wing struts. The small tailskid also had an oleo shock absorber. [2]
Its tail surfaces were round-tipped, with the horizontal tail mounted on top of the fuselage. All of the control surfaces were unbalanced; the elevators had a small cut-out to allow movement of the rudder, which extended down to the keel. [2]
Lorraine-Hanriot completed the LH.21S at Villacoublay in August 1930, [3] though the date of the first flight is not known. It was on display at the 12th Paris Salon in December 1930 [4] and by February 1931 it was with the STIAé for certification tests. [5]
Comparative testing by military pilots of the three air-ambulances was under way by March 1931. [6] Test flights of the Lorraine-Hanriot continued until at least June 1931. [7]
In July 1931 Les Amis de l'aviation sanitaire (Friends of Medical Aviation) organised a large meeting on the subject spread over several days, one of which was used for demonstration flights undertaken by nine different types of aircraft. The Lorraine-Hanriot LH.21S, Potez 42, and Guillemin JG.40 formed the single patient group. [8]
None of these aircraft gained a government contract, so only two Lorraine-Hanriot LH.21S were built. [9] The small air-ambulance role was filled by the later and more powerful Bloch MB.81. [10]
Data from L'Aéronautique December 1930 [2]
General characteristics
Performance
The Potez 37 was a two-seat, long range reconnaissance aircraft built to compete for a French government contract. It flew in mid-1930 but did not win the competition, so only two were completed.
The Potez 40 was a French three-engine, braced high-wing monoplane designed and built in response to a French government programme for colonial transport and policing aircraft duties.
The Caudron C.251 Et-2 was a French tandem seat, open cockpit biplane designed as an intermediate trainer and built in 1931. It did not go into production.
The Caudron C.220 was a two-seat French biplane trainer. Only two were built, using different engines.
The Lorraine Hanriot LH.130 is a French racing aircraft designed and built in the early 1930s, to compete in the Coupe Michelin air races.
The Lorraine Hanriot LH.41 was a single-seat racing aircraft designed and built in France specifically to compete in the Coupe Michelin air races, held in France.
The Lorraine-Hanriot LH.70 or S.A.B. LH.70 was a French trimotor designed to a 1930 government programme for a colonial policing aircraft. Only two were built.
The Potez 50 or Potez 50 A2 was a French two seat military multi-rôle aircraft, first flown in 1931. It did not go into service but seven variants using five different engines were produced, one of them setting several speed with useful load records and another, the Potez 506, setting three altitude world records.
The Weymann-Lepère WEL-80 R.2 was a French two seat reconnaissance aircraft built to compete for a 1928 government contract. It was not successful and did not enter production.
The Wibault 260 R.2 was a contender for a French government contract for a long range, two seat reconnaissance aircraft, issued in 1928. There were eight prototypes in the 1931-2 contest and the Wibault was not selected for production.
The Nieuport-Delage NiD 580 R.2 was a contender for a French government contract for a long range, two seat reconnaissance aircraft, issued in 1928. There were eight prototypes in the 1931-2 contest and the NiD 580 was not selected for production.
The Dewoitine D.480 was a French single engine side-by-side sports and training aircraft built in the early 1930s. Two were completed and flew with several different radial engines. One remained active through the 1950s.
The Wibault 220 or Wibault R.N.3 220 was a twin-engined French night reconnaissance aircraft. Two were built in 1930 to a government contract.
The Morane-Saulnier MS.300 and MS.301 were French parasol wing introductory trainer aircraft, first flown in 1930. They differed only in engine type. Neither reached production but were developed into two similar trainers, the MS.230 and MS.315, which were made in large numbers.
The Guillemin JG.40 was designed and built to meet a French government requirement for a small air ambulance capable of operating in the colonies. Two were completed and performed well but the JG.40 did not reach production.
The Potez 42 was designed and built in 1930 to meet a French government requirement for a small air ambulance capable of operating in the colonies. It did not reach production.
The Guillemin JG.10 or Blériot-Guillemin JG.10 was a French two seat touring aircraft, designed to be as simple and safe to fly and maintain as a car, with similar facilities, as well as provision for parachutes.
The Potez 24 A.2 was a mid-1920s French biplane intended to replace the Potez 15 as an army observation aircraft. The further improved and larger Potez 25 was preferred for production.
The Hanriot H.46 Styx was a French, single-engined, parasol wing aircraft which could equally be configured for training, liaison or ambulance roles; in the latter form it was able to accept a patient on a stretcher. Several different engines were fitted and flown but the type did not reach production.
The Albert A-10 was a four-seat French transport aircraft which could be rapidly converted into an air ambulance. Two or three examples were built between 1929 and 1932, using at least two different engines, but neither variant reached production.
 | Wikimedia Commons has media related to Lorraine-Hanriot LH.21S . |