Hansa-Brandenburg CC

Last updated
CC
Ago sea-pursuit flying boat.png
RoleFighter flying boat
Manufacturer Hansa und Brandenburgische Flugzeug-Werke
First flight 1916
Primary usersFlag of Austria-Hungary (1867-1918).svg  Austria-Hungary
Flag of the German Empire.svg  German Empire
Produced73

The Hansa-Brandenburg CC was a single-seat German fighter flying boat of World War I. It was used by both the Kaiserliche Marine (Imperial German Navy) and the Austro-Hungarian Navy.

Contents

Development and design

The Hansa-Brandenburg CC (where the designation CC came from the initials of the financier of the Hansa Brandenburg works, Camillo Castiglioni) was designed by Ernst Heinkel during 1916 for use by the Austro-Hungarian Navy. It was a single engined, single seater flying boat, with a pusher engine mounted between the wings. It had single-bay wings, with the unusual "Star-Strutter" arrangement of bracing struts (where four Vee struts joined in the centre of the wing bay to result in a "star" arrangement) shared with the Hansa-Brandenburg D.I and the KDW.

The CC was purchased both by Austro-Hungary and the Imperial German Navy. The Austro-Hungarian aircraft were powered by 119 kW (160 hp) Austro-Daimler or 130 kW (180 hp) Hiero engines and armed by a single 8 mm (.315 in) Schwarzlose machine gun. The German aircraft were powered by 110 kW (150 hp) Benz Bz.III engines and armed with one or two lMG 08/15 machine guns. [1]

One example was modified as a triplane, while a second aircraft was modified with sponsons replacing the outrigger floats in support of the development process for the Zeppelin-Lindau (Dornier) Rs.IV.

Triplane variant, serial A.62 Hansa Brandenburg CC A.45.jpg
Triplane variant, serial A.62

Triplane variant

The triplane configuration was created from the standard model by inserting a third, short-span wing between the upper and lower planes of, at the point where the star struts crossed. Delivered to Austro-Hungary in the Spring of 1917, the sole example was written off that autumn following a landing accident. [1]

Operational history

Austro-Hungary received 37 Hansa Brandenburg CCs, using them to provide air defence for ports and naval bases along the Adriatic sea coast. [2]

Germany received 36 aircraft from February 1917. They were temporarily grounded in July of that year because of severe vibration, being modified with additional interplane bracing struts. [3]

Operators

Flag of Austria-Hungary (1867-1918).svg  Austria-Hungary

Flag of the German Empire.svg  German Empire

Specifications (CC Kaiserliche Marine)

Hansa-Brandenburg CC 3-view.svg

Data fromThe Complete Book of Fighters [3]

General characteristics

Performance

Armament
1 or 2 × 7.92 mm (0.312 in) LMG 08/15 machine guns

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Rumpler 6B</span> Type of aircraft

The Rumpler 6B was a German single-engine floatplane fighter with a biplane wing structure, designed and built by Rumpler Flugzeugwerke, in Berlin Johannisthal and introduced in 1916.

<span class="mw-page-title-main">Hansa-Brandenburg KDW</span> German WW1 Floatplane

The Hansa-Brandenburg KDW was a German single-engine, single-seat, fighter floatplane of World War I. The KDW – Kampf Doppeldecker, Wasser – was adapted from the Hansa-Brandenburg D.I landplane to provide coastal defence over the North Sea.

<span class="mw-page-title-main">Hansa-Brandenburg W.12</span> Type of aircraft

The Hansa-Brandenburg W.12 was a German biplane fighter floatplane of World War I. It was a development of Ernst Heinkel's previous KDW, adding a rear cockpit for an observer/gunner, and had an unusual inverted tailfin/rudder in order to give an uninterrupted field of fire.

<span class="mw-page-title-main">Hansa-Brandenburg W.29</span> Type of aircraft

The Hansa-Brandenburg W.29 was a German two-seat fighter floatplane which served in the closing months of World War I with the Imperial German Navy's Naval Air Service from bases on the North Sea coast.

The Friedrichshafen FF.43 was a German single-seat floatplane fighter of the 1910s produced by Flugzeugbau Friedrichshafen.

<span class="mw-page-title-main">Hansa-Brandenburg W.19</span> German fighter-reconnaissance aircraft of World War I

The Hansa-Brandenburg W.19 was a German fighter-reconnaissance aircraft of World War I. It was a single-engined two-seat biplane floatplane, and was a larger development of the successful W.12. It served with the Kaiserliche Marine during 1918.

<span class="mw-page-title-main">Hansa-Brandenburg D.I</span> WWI German Fighter Aircraft

The Hansa-Brandenburg D.I, also known as the KD was a German fighter aircraft of World War I. Despite poor handling characteristics it was put into service by Austria-Hungary, where some aircraft served until the end of the war.

<span class="mw-page-title-main">Lohner L</span> Type of aircraft

The Lohner L was a reconnaissance flying boat produced in Austria-Hungary during World War I. It was a two-bay biplane of typical configuration for the flying boats of the day, with its pusher engine mounted on struts in the interplane gap. The pilot and observer sat side by side in an open cockpit, and both the upper and lower sets of wings featured sweepback.

<span class="mw-page-title-main">Hansa-Brandenburg W.11</span> Type of aircraft

The Hansa-Brandenburg W.11 was a fighter floatplane built in Germany in 1917 as a more powerful version of the KDW. Similar in general configuration to its predecessor, the W.11 shared the same unusual interplane strut arrangement, and featured fins above and below the fuselage. Only three examples were built.

<span class="mw-page-title-main">Hansa-Brandenburg W.13</span> 1910s German flying boat

The Hansa-Brandenburg W.13 was a flying boat bomber developed in Germany in 1917 and used by the Austro-Hungarian Navy during World War I.

<span class="mw-page-title-main">Hansa-Brandenburg W.27</span> Type of aircraft

The Hansa Brandenburg W.27 and W.32 were prototype fighter floatplanes developed in parallel in Germany during World War I. They were developments of and intended replacements for the W.12 then in service and differed from each other principally in the choice of powerplant, the W.27 with a Benz Bz.IIIb and the W.32 with the same Mercedes D.III that the original W.12 used.

<span class="mw-page-title-main">Hansa-Brandenburg W.20</span> Type of aircraft

The Hansa-Brandenburg W.20 was a German submarine-launched reconnaissance flying boat of the World War I era, designed and built by Hansa-Brandenburg.

<span class="mw-page-title-main">Hansa-Brandenburg L.16</span> Type of aircraft

The Hansa-Brandenburg L.16, was an experimental triplane fighter that was designed in the Austro-Hungarian Empire during the First World War.

The Pfalz Dr.II was a German triplane fighter prototype of World War I built by Pfalz Flugzeugwerke.

The Hansa-Brandenburg W.16 was a floatplane fighter built in Germany during World War I for the Imperial German Navy.

Hansa-Brandenburg W.34 was a prototype German two-seat, low-wing single-engined seaplane, which had been designed by Hansa und Brandenburgische Flugzeugwerke during World War I.

<span class="mw-page-title-main">Hansa-Brandenburg W.18</span> WWI German flying boat

The Hansa-Brandenburg W.18 was a single-seat German fighter flying boat of World War I. It was used by both the Kaiserliche Marine and the Austro-Hungarian Navy.

The Hansa-Brandenburg W.25 was a German floatplane fighter of the World War I era, designed and built by Hansa-Brandenburg.

The Hansa-Brandenburg W.17 was a German flying boat fighter of the World War I era, designed and built by Hansa-Brandenburg.

The Hansa-Brandenburg W.23 was a German flying boat fighter of World War I.

References

  1. 1 2 Green and Swanborough 1994, p.83.
  2. Hansa Brandenburg CC Archived 2005-04-02 at the Wayback Machine Fiddlersgreen.net. Retrieved 1 March 2008.
  3. 1 2 Green and Swanborough 1994, p.84.

Bibliography