IIL IS-9

Last updated
IS-9
RoleSingle seat motor glider
National origin Romania
ManufacturerIntreprinderea de industrie Locală (IIL)
DesignerIosif Silimon
First flight2 July 1958
Number built1
Developed from IIL IS-5

The IIL IS-9 was a low powered, experimental pod and boom style motor glider, designed and built in Romania in the late 1950s.

Contents

Design and development

From about 1950 to his death in February 1981, Iosif Silimon was Romania's most prominent glider designer, his aircraft distinguished by his initials. Over that time he also designed a few powered aircraft, of which the IS-9 motor glider was the first built by IIL, flying for the first time on 2 July 1958. Its layout had much in common with the IS-5 pod and boom glider, but as well as the engine the IS-9 had a new and shorter span wing and a tricycle undercarriage. [1] [2]

The new high wing of the IS-9 had a span of only 13 m (42 ft 8 in) and was mounted with a dihedral of 2.5°. In plan it had a rectangular centre section, extending to about mid-span, with straight-tapered outer panels. The wing sections were the same NACA ones used on the IS-7 and IS-8 gliders. It was of wooden construction with a single wooden spar and a plywood-covered torsion box from the spar forward around the leading edge. Behind the spar the wing was fabric covered. There were fabric-over-ply-covered wooden slotted ailerons which occupied all the trailing edge of the outer panels. The wing tips carried the small, streamlined bodies known as salmons which were common at the time. [2]

The deep oval section pod of the IS-9 was a sheet metal monocoque. Its single-seat cockpit was ahead of the wing leading edge, enclosed by a smoothly contoured, two-piece, side-opening perspex canopy. Rectangular, fuselage side-mounted airbrakes were positioned under the wing. They each had an area of 0.45 m2 (4.8 sq ft), larger than those on the IS-5. The pod ended abruptly under the trailing edge, with a 15 kW (20 hp) engine of unknown make in the rear driving a small-diameter, two-blade propeller. The fixed tricycle undercarriage was mounted on the bottom of the pod, with small wheels and a narrow track.

Like the IS-5, the IS-9 had a steel tube boom and a very similar empennage to that of the glider. Its ply covered fin extended both above and below the boom, carrying a fabric covered, rounded, equally deep unbalanced rudder, broad at its heel. The fin also mounted a straight edged, ply-covered tailplane placed just above the boom which carried rounded elevators, mass balanced by a bob weight inside the fuselage, with gaps at their roots to clear the fin and a small cutout for rudder movement; the elevators were fabric-covered-over-ply skins like the ailerons and had a starboard-side trim tab. [2]

The IS-9 was intended as an experimental aircraft, not for production. It was modified and renamed as the IS-9A in 1960, though no details of the alterations are known. Testing continued into at least the early 1960s. [3]

Specifications

Data from Sailplanes of the World, pp.200-1 [2]

General characteristics

Performance


Related Research Articles

The Slingsby T.37 Skylark 1 was a small low-cost sailplane built during 1952-3 at Kirbymoorside, Yorkshire by Slingsby Sailplanes.

Slingsby Sky

The Slingsby Type 34 Sky is a high performance single seat competition sailplane built in the United Kingdom. It was successful in major events, particularly in the World Gliding Championships of 1952.

Slingsby Skylark 3

The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.

Slingsby Skylark 4

The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.

The Akaflieg Darmstadt D-30 Cirrus was an aerodynamically advanced single seat sailplane with a very high aspect ratio wing and a pod and boom fuselage. Built in Germany just before World War II, it was intended as a record breaker and duly set a new world out-and-return distance record in 1938.

Cijan-Obad Orao competition sailplane

The Cijan-Obad Orao is a competition single seat sailplane designed in Yugoslavia just after World War II, one of the most advanced of its type at the time. It flew in three World Gliding Championships, having greatest success at its first in 1950 when it reached third place.

Rubik R-25 Mokány

The Rubik R-25 Mokány, in English: Plucky person and sometimes known as the R-25 Standard (class), is a Hungarian single seat Standard Class glider of all-metal construction, first flown in 1960. It was one of a series of similar aircraft designed by Ernő Rubik. Only one was built.

The Lie-Fang 1, some sources Jeifang 1, was one of the first gliders designed and built in China, though with Polish design input. It is an all-wood, two seat, intermediate training aircraft which first flew in 1958.

Győr-2

The Győr-2 was a high performance sailplane designed and built at the Aircraft Designer and Builder Group, Aeroclub of the Rolling-stock Factory, Győr in Hungary in the early 1950s.

CVT2 Veltro

The CVT2 Veltro was an Italian competition glider built in the mid-1950s. Its advanced design incorporated a laminar flow wing, T-tail, retracting undercarriage and a reclining seat to reduce parasitic drag.

The IIL IS-4 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in the late 1950s.

The IIL IS-5 was a single seat, high performance sailplane designed by Iosif Șilimon and built in Romania in 1960.

The IIL IS-7 was a two-seat, sailplane designed by Iosif Șilimon and built in Romania in the late 1950s. Only one prototype was built.

The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.

The IIL IS-10 was a high-performance, single-seat glider, designed and built in Romania in the early 1960s. It was the first Romanian aircraft to use laminar flow airfoils.

The IIL IS-11 was an aerobatic, single seat glider, designed and built in Romania in 1959. It was built in small numbers.

The IIL IS-12 was a two-seat glider, designed and built in Romania in 1960. It had a wooden wing but a metal fuselage and was constructed in parallel with the all-wood IS-13 for comparative tests. It was later followed by the IS-13a, a version with an all-metal wing.

The Merville SM.31 is a French high performance glider with a laminar flow wing, first flown in 1960. Only one was built.

The Civil Aviation Department Ashvini was the first two-seat glider designed and built in India. It was produced in small numbers in the early 1960s.

The Jancsó-Szokolay M22 was a Hungarian single-seat sailplane first flown in 1937. Twenty were built and the type set several national records. Some remained in service up to about 1953.

References

  1. ↑ Taylor, John W. R. (1981). Jane's All the World's Aircraft 1981-1982. London: Jane's Information Group. p. 586. ISBN   0710607059.
  2. 1 2 3 4 Shenstone, B.S.; Wilkinson, K.G. (1963). The World's Sailplanes. II. Organisation Scientifique et Technique Internationale du Vol à Voile (OSTIV) and Schweizer Aero-Revue. pp. 200–1.
  3. 1 2 3 Taylor, John W R (1962). Jane's All the World's Aircraft 1962-63. London: Sampson Low, Marston & Co. Ltd. p. 335.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.