Italian corvette Vettor Pisani

	Illustration of Vettor Pisani c. 1879
Class overview
Name	Vettor Pisani
Builders	Venice Naval Yard
Operators	Regia Marina (Royal Navy)
Preceded by	Caracciolo
Succeeded by	Cristoforo Colombo
Completed	1
History
Builder	Venice Naval yard
Laid down	11 May 1867
Launched	22 July 1869
Completed	10 April 1871
Fate	Discarded, 12 February 1893
General characteristics
Type	Screw corvette
Displacement	1,676 long tons (1,703 t)
Length	65.1 m (213 ft 7 in) pp
Beam	11.84 m (38 ft 10 in)
Draft	5.28 m (17 ft 4 in)
Installed power	2 × fire-tube boilers ; 1,004 ihp (749 kW);
Propulsion	1 × marine steam engine ; 1 × screw propeller ;
Speed	9.76 knots (18.08 km/h; 11.23 mph)
Complement	226
Armament	6 × 120 mm (4.7 in) guns; 2 × 75 mm (3 in) guns; 2 × 57 mm (2.2 in) guns; 2 × 37 mm (1.5 in) guns;

Last updated February 16, 2024

Vettor Pisani was a screw corvette of the Italian Regia Marina (Royal Navy) built in the late 1860s and early 1870s. The ship left Italy in 1882 for a three-year voyage round the world.

Design

The design for Vettor Pisani was prepared by the naval engineer Giuseppe Micheli. Vettor Pisani was 65.1 meters (213 ft 7 in) long between perpendiculars, and she had a beam of 11.84 m (38 ft 10 in) and an average draft of 5.28 m (17 ft 4 in). She displaced 1,676 long tons (1,703 t ). She had a crew of 226.^[1]

Her propulsion system consisted of a single marine steam engine that drove a single screw propeller. Steam was supplied by a pair of coal-fired fire-tube boilers that were manufactured by the firm Guppy of Naples. Vettor Pisani could steam at a top speed of 9.76 knots (18.08 km/h; 11.23 mph) from 1,004 indicated horsepower (749 kW). To supplement the steam engines, she was fitted with a full ship rig.^[1]

The main battery for Vettor Pisani consisted of six 120-millimeter (4.7 in) muzzle-loading guns, three guns per broadside. For close-range defense against torpedo boats, she initially carried a secondary battery of two 75 mm (3 in) guns, two 57 mm (2.2 in) guns, and two 37 mm (1.5 in) guns. During a refit in 1879, she was rearmed with a main battery of ten 120 mm breech-loading guns. Four of these guns were removed in 1885.^[1]

Service history

Admiral Giuseppe Palumbo, who commanded Vettor Pisani
during her voyage overseas Ammiraglio Giuseppe Palumbo.jpg — Admiral Giuseppe Palumbo, who commanded *Vettor Pisani* during her voyage overseas

The ship was laid down on 11 May 1867 in the Venice Naval Yard, under the name Briosa. While still under construction in 1868, she was renamed Vettor Pisani, and her completed hull was launched on 22 July 1869. Fitting out was completed by 10 April 1871.^[1] After entering service, Vettor Pisani was sent on a cruise abroad, and later in 1871, she had reached Japanese waters.^[2] She remained abroad the following year, and during the voyage she visited Australia and New Guinea.^[3] She was still in Australian waters in 1873.^[4] The ship was modernized in 1879.^[1]

Vettor Pisani embarked on a lengthy voyage overseas in the early 1880s with a variety of goals, including training the crew, showing the flag, and conducting extensive scientific experiments. These tests included hydrographic surveys, depth soundings, and collection of marine animals for later study. A temporary laboratory was set up in the gun battery deck. The ship's captain was Commander Giuseppe Palumbo for the duration of the voyage. Lieutenants Cesare Marcacci and Gaetano Chierchia were responsible for supervising most of the experiments, and Chierchia had been sent to study at the Zoological Station at Naples for three months before the trip. Anton Dohrn, the director of the facility, came aboard Vettor Pisani to discuss the expedition before the vessel sent sail, and he later welcomed the ship home.^[5] The ship departed from Naples on 20 April 1882.^[6]

Vettor Pisani conducted surveys off the coast of South America, including around the Chonos Archipelago between 23 November and 6 December 1882. Later, during an exploration of the Gulf of Corcovado, Vettor Pisani ran aground twice but her crew was able to free the vessel at high tide both times. While there, the captain named several islands that had previously not been named. In early 1883, Vettor Pisani visited Valparaíso, Chile; from there, she sailed to Coquimbo and then Caldera, where she conducted extensive surveys of the coast, which had been dangerous for merchant vessels due to insufficient charts. In March 1884, she arrived in the Galápagos Islands, where she conducted further tests. Vettor Pisani then crossed the Pacific, conducting additional surveys along the way, including near the Hawaiian Islands.^[7]

While still overseas later in 1884, Vettor Pisani was sent to East Asian waters to reinforce the Italian presence there, which at that time consisted of the screw corvette Cristoforo Colombo, during a period of tension that resulted in the Sino-French War.^[8]Vettor Pisani arrived back in Italy on 29 April 1885, having collected some 1,600 specimens over the course of the voyage.^[6] Later that year, she was reduced to a training ship for naval cadets at the Italian naval academy in Livorno. She served in this capacity until the early 1890s, and on 12 February 1893, the Italian navy discarded the ship. Her ultimate fate is unknown.^[1]

Notes

1 2 3 4 5 6 Fraccaroli, p. 345.
↑ Ziegler, p. 406.
↑ Cresciani, p. 42.
↑ von Armingen, p. 318.
↑ della Croce, pp. 204–206.
1 2 Groeben, p. 18.
↑ della Croce, pp. 204–205.
↑ China, pp. 27–28, 43.

Related Research Articles

Regina Margherita was the lead ship of her class of pre-dreadnought battleships built for the Italian Regia Marina between 1898 and 1904. She had one sister ship, Benedetto Brin. Regina Margherita saw action in the Italo-Turkish War of 1911–1912. By the outbreak of World War I in 1914, the battleship had been reduced to a training ship. She struck two naval mines on the night of 11–12 December 1916 while steaming off Valona. She sank with heavy loss of life: 675 men were killed, and only 270 survived.

Benedetto Brin was a Regina Margherita-class pre-dreadnought battleship built for the Italian Regia Marina between 1899 and 1905. The ship was armed with a main battery of four 12-inch (300 mm) guns and was capable of a top speed of 20 knots. Benedetto Brin saw combat in the Italo-Turkish War of 1911–1912, including the bombardment of Tripoli in October 1911. She was destroyed by an internal explosion during World War I in September 1915, which killed over 450 of the ship's crew.

Ammiraglio di Saint Bon was a pre-dreadnought battleship of the Regia Marina built during the 1890s. She was laid down in July 1893, launched in April 1897, and completed in May 1901. She was the lead ship of her class, and had one sister ship, Emanuele Filiberto. The ship was armed with a main battery of four 254 mm (10 in) guns and was capable of a top speed of 18 knots.

<i>Vettor Pisani</i>-class cruiser Italian class of cruisers

The Vettor Pisani class consisted of two armoured cruisers built for the Royal Italian Navy in the 1890s. The two ships of the class, Vettor Pisani and Carlo Alberto, were frequently deployed overseas during their careers. The former served in the Far East during the Boxer Rebellion of 1900 while the latter was involved in pioneering long-range radio experiments several years later before deploying to South American waters. Carlo Alberto then served as a training ship for several years. Both ships participated in the Italo-Turkish War of 1911–12 and played minor roles in World War I, during which time Carlo Alberto was converted into a troop transport and Vettor Pisani into a repair ship. They were both discarded in 1920 and subsequently scrapped.

The Italian cruiser Vettor Pisani was the name ship of her class of two armored cruisers built for the Royal Italian Navy in the 1890s. She often served as a flagship during her career and frequently served overseas. On one of these deployments, the ship received a radio message from Peking, one of the first long-range radio transmissions to a ship. Vettor Pisani participated in the Boxer Rebellion of 1900 and the Italo-Turkish War of 1911–12, during which her admiral nearly caused a diplomatic incident with the Austro-Hungarian Empire. During World War I, her activities were limited by the threat of Austro-Hungarian submarines and she was converted into a repair ship in 1916. Vettor Pisani was stricken from the Navy List in 1920 and scrapped later that year.

Italian cruiser <i>Carlo Alberto</i> Italian Vettor Pisani-class cruiser

The Italian cruiser Carlo Alberto was the second of two Vettor Pisani-class armored cruisers built for the Royal Italian Navy in the 1890s. She was deployed overseas several times during her career, notably to the Far East and South America. The ship was used as a royal yacht by King Victor Emmanuel III of Italy in 1902, during which time she was used for radio experiments by Guglielmo Marconi. Carlo Alberto served as a training ship before the start of the Italo-Turkish War of 1911–12. During the war she supported Italian operations in Libya. The ship was virtually inactive during World War I and was converted into a troop transport in 1917–18. Carlo Alberto was stricken from the Navy List in 1920 and subsequently broken up for scrap.

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Roma was an ironclad warship built for the Italian Regia Marina in the 1860s; she was the lead ship of the Roma-class ironclads. Armed with a main battery of five 254 mm (10 in) and twelve 203 mm (8 in) guns in a broadside arrangement, Roma was obsolescent by the time she entered service. As a result, her career was limited. In 1880, she took part in an international naval demonstration off Ragusa to enforce the Treaty of Berlin. In November 1881, she collided with the ironclad Principe Amedeo in a storm in Naples, but she was not damaged. Roma was reduced to a guard ship in 1890 and then to a depot ship in 1895. In July 1896, she was scuttled to save the ship from a fire caused by a lightning strike. She was thereafter raised and broken up for scrap.

Principe di Carignano was the lead ship of the Principe di Carignano class of ironclad warships built for the Italian Regia Marina in the 1860s. She was the first ironclad built in Italy; her keel was laid January 1861, her hull was launched in September 1863, and she was completed in June 1865. Principe di Carignano was a broadside ironclad armed with a battery of ten 203 mm (8 in) guns and twelve 164 mm (6.5 in) guns.

Messina was the second of three Principe di Carignano-class ironclads built for the Italian Regia Marina in the 1860s. She was laid down in September 1861, her hull was launched in December 1864, and she was completed in February 1867. Messina was a broadside ironclad armed with a battery of four 203 mm (8 in) guns and eighteen 164 mm (6.5 in) guns. Her career was limited, owing to the emergence of more modern ironclads and a severe reduction in the Italian naval budget following their defeat at the Battle of Lissa in 1866. She was discarded in 1875 and sold to ship breakers to help pay for new ironclads then under construction.

Conte Verde was the third of three Principe di Carignano-class ironclads built for the Italian Regia Marina, though she differed in several respects from her sisters. Unlike the other two members of her class, she did not receive complete iron armor, instead relying on partial plating at her bow and stern. She was laid down in February 1863, she was launched in July 1867, and she was completed in December 1871. Conte Verde was a broadside ironclad armed with a battery of four 203 mm (8 in) guns and eighteen 164 mm (6.5 in) guns. Her career was limited, owing to the emergence of more modern ironclads and a severe reduction in the Italian naval budget following their defeat at the Battle of Lissa in 1866. She was discarded in 1880 and sold to ship breakers to help pay for new ironclads then under construction.

Terribile was the first ironclad warship to be built for the Italian Regia Marina, and the second member of the Formidabile class. Terribile and her sister, Formidabile, were both built in France. A broadside ironclad, she was laid down in June 1860, launched in February 1861, and was completed in September that year. She was the first Italian ironclad to enter service and was equipped with four 203 mm (8 in) and sixteen 164 mm (6.5 in) guns.

Formidabile was the lead ship of the Formidabile-class ironclad warships, the first ships of that type to be built for the newly formed Italian Regia Marina. Formidabile and her sister, Terribile, were both built in France; Formidabile was laid down in December 1860, was launched in October 1861, and was completed in May 1862. She was a broadside ironclad, equipped with four 203 mm (8 in) and sixteen 164 mm (6.5 in) guns.

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Cristoforo Colombo was a screw corvette of the Italian Regia Marina built in the 1870s.

Flavio Gioia was a screw corvette of the Italian Regia Marina built in the late 1870s and early 1880s.

Caracciolo was a screw corvette of the Italian Regia Marina built in the 1860s. She was the first vessel of that type built after the unification of Italy, though the Italian fleet inherited several screw corvettes from the navies of Naples, Tuscany, and Sardinia. The ship was armed with a main battery of six 160 mm (6.3 in) guns. Originally built with both steam and sail propulsion, Caracciolo later had her engine removed for use as a training ship.

Magenta was a screw corvette, originally of the Tuscan Navy, which was later incorporated into the Italian Regia Marina during the unification of Italy. The ship was built in the late 1850s and early 1860s; by the time she was completed, Italy had unified and so she only served in the Regia Marina. She made a circumnavigation of the globe, which lasted from 1865 to 1868, making her the first Italian vessel to do so. The voyage included diplomatic missions to China and Japan, along with scientific explorations and surveys. She saw little service thereafter, and was laid up in 1875 and broken up that same year.

Principessa Clotilde was a screw corvette of the Italian Regia Marina built in the 1860s. The ship was originally laid down for the Royal Sardinian Navy, but by the time the ship was completed, Italy had unified, and so she entered service with the Regia Marina.

References

von Armingen, Friedrich Geitler, ed. (21 May 1873). "Ausland" [Overseas]. Neue Militär-Zeitung[New Military Newspaper] (in German). Vienna (41): 318. OCLC 224831739.
Cresciani, Gianfranco (2003). The Italians in Australia. Cambridge: Cambridge University Press. ISBN 9780521537780.
della Croce, Norberto (2002). "Italian Contributions to the Knowledge of the Southeast Pacific Ocean". In Benson, Keith Rodney; Rehbock, Philip F. (eds.). Oceanographic History: The Pacific and Beyond. Seattle: University of Washington Press. pp. 204–209. ISBN 9780295982397.
China: A Collection of Correspondence and Papers Relating to Chinese Affairs. London: Harrison & Sons. 1885. OCLC 894534063.
Fraccaroli, Aldo (1979). "Italy". In Gardiner, Robert (ed.). Conway's All the World's Fighting Ships 1860–1905 . London: Conway Maritime Press. pp. 334–359. ISBN 978-0-85177-133-5.
Groeben, Christiane, ed. (1993). Karl Ernst Von Baer (1792–1876) and Anton Dohrn (1840–1909): Correspondence. Philadelphia: American Philosophical Society. ISBN 9780871698339.
Ziegler, Johannes, ed. (1871). "Schiffbau in Italien" [Shipbuilding in Italy]. Archiv für Seewesen: Mittheilungen aus dem Gebiete der Nautik, des Schiffbau- und Maschinenwesens, der Artillerie, Wasserbauten, etc. Sowie der Literatur und Bibliographie des Seewesens[Archives for Marine Life: Communications from the Fields of Nautical Science, Shipbuilding, and Mechanical Engineering, Artillery, Hydraulic Engineering, etc. As Well as the Literature and Bibliography of Marine Life]. Vienna: Drunk und Commissions-Verlag von Carl Gerold's Sohn. VII (VIII): 403–407. OCLC 67899261.