Italian corvette Flavio Gioia

Last updated

Italian corvette Flavio Gioia NH 66040.jpg
Flavio Gioia, date unknown
Class overview
NameFlavio Gioia
Operators Regia Marina (Royal Navy)
Preceded by Cristoforo Colombo
Succeeded by Amerigo Vespucci
Completed1
History
Builder Regio Cantiere di Castellammare di Stabia
Laid down26 June 1879
Launched12 June 1881
Completed26 January 1883
FateDiscarded, 10 September 1920
General characteristics
Type Screw corvette
Displacement2,493 long tons (2,533  t)
Length78 m (255 ft 11 in) pp
Beam12.78 m (41 ft 11 in)
Draft5.19 m (17 ft)
Installed power
Propulsion
Speed14 knots (26 km/h; 16 mph)
Complement268
Armament
  • 8 × 149 mm (5.9 in) guns
  • 3 × 75 mm (3 in) guns

Flavio Gioia was a screw corvette of the Italian Regia Marina (Royal Navy) built in the late 1870s and early 1880s.

Contents

Design

The design for Flavio Gioia was prepared by the naval engineer Carlo Vigna; the ship was the first steel-hulled cruising vessel of the Italian Regia Marina (Royal Navy). [1] The Italian navy still largely relied on a fleet of old wooden-hulled cruising ships built in the 1850s and 1860s, but by the 1870s, the world's navies had begun to move to steel construction. The Italians responded with Flavio Gioia and the similar Amerigo Vespucci as part of a modest program to modernize its cruising fleet. [2] The two vessels were similar enough that some sources consider them to have been the same class, [3] though others consider them to be distinct designs. [1]

Characteristics

The ship was 78 meters (255 ft 11 in) long between perpendiculars, and she had a beam of 12.78 m (41 ft 11 in) and an average draft of 5.19 m (17 ft). She displaced 2,493 long tons (2,533  t ). The ship had a traditional clipper bow and an overhanging stern. Her superstructure was minimal, consisting primarily of a small conning tower placed amidships. She had a crew of 268. [1]

Her propulsion system consisted of a single horizontal, 3-cylinder compound steam engine that drove a single screw propeller. Steam was supplied by eight coal-fired fire-tube boilers that vented into a single funnel located amidships. Flavio Gioia could steam at a top speed of 14 knots (26 km/h; 16 mph) from 4,156 indicated horsepower (3,099 kW). The ship had a capacity to store 500 long tons (510 t) of coal for the boilers. To supplement the steam engines, she was fitted with a three-masted barque rig. [1] [3]

The main battery for Flavio Gioia consisted of eight 149-millimeter (5.9 in) 40-caliber breech-loading guns, four guns per broadside. For close-range defense against torpedo boats, she carried a secondary battery of three 75 mm (3 in) guns. In 1892, she was rearmed with four 120 mm (4.7 in) 40 cal. guns and two 356 mm (14 in) torpedo tubes. The ship was protected by a curved armor deck that was 38 mm (1.5 in) thick, with a layer of extensively subdivided series of watertight compartments below, which was intended to control flooding in the event of damage below the waterline. [1] [3]

Service history

The keel for Flavio Gioia was laid down on 26 June 1879 at the Regio Cantiere di Castellammare di Stabia shipyard in Castellammare di Stabia. Her completed hull was launched on 12 June 1881 and fitting out was completed by 26 June 1883. [1]

In 1892, Flavio Gioia was rearmed and converted into a training ship. [1] Later that year, Flavio Gioia joined the Training Squadron attached to the Italian naval academy at Livorno. In July, she went on a training cruise with the other vessels of the squadron, including the screw corvette Caracciolo and the old screw frigate Vittorio Emanuele, supported by the transport ship Conte di Cavour. The voyage lasted for three and a half months, and included stops in the Azores, Gibraltar, Vigo and Cartagena in Spain, the Balearic Islands, and La Maddalena, Italy, before returning to Livorno. [4] On 1 October 1893, she was assigned to the 3rd Department, which was stationed in Venice; she remained there through the following year. [5] Beginning on 14 October, the Italian fleet, including Flavio Gioia, assembled in Genoa for a naval review held in honor of King Umberto I at the commissioning of the new ironclad Re Umberto. The festivities lasted three days. [6] Flavio Gioia operated as a cadet training vessel in company with the corvette Cristoforo Colombo in 1895. Flavio Gioia was based in Naples and Taranto that year. [7]

In 1902, she was assigned to the Training Squadron with Amerigo Vespucci and the gunboat Curtatone. That year, Flavio Gioia spent ten months in commission for training activities. [8] Flavio Gioia remained in the Training Squadron in 1903, and for four months of the year, she was attached to the Italian naval academy. [9] The Training Squadron had been expanded by 1904; Flavio Gioia served as the main cadet training ship with the Italian naval academy, while the old ironclads Castelfidardo, Affondatore, and Lepanto served as gunnery and torpedo training ships, and the corvette Caracciolo operated as a boys' training vessel. [10] The ship remained in service until she was stricken on 10 September 1920. She was thereafter renamed CM181 and was used as a training ship in Naples until 4 March 1923. During this period, she was unofficially referred to as Caracciolo. Her ultimate fate is unknown. [1]

Notes

  1. 1 2 3 4 5 6 7 8 Fraccaroli, p. 345.
  2. ↑ Sondhaus, p. 113.
  3. 1 2 3 Clowes, p. 382.
  4. ↑ Chapman, p. 16.
  5. ↑ Garbett 1894a, p. 201.
  6. ↑ Garbett 1894b, p. 1295.
  7. ↑ Garbett 1895, pp. 89, 91.
  8. ↑ Garbett 1902, p. 1075.
  9. ↑ Garbett 1903, p. 1069.
  10. ↑ Garbett 1904, p. 1430.

Related Research Articles

Italian ironclad <i>Lepanto</i> Ironclad warship of the Italian Royal Navy

Lepanto was an Italian ironclad battleship built for the Italian Regia Marina, the second and last ship of the Italia class. Lepanto was laid down in November 1876, launched in March 1883, and completed in August 1887. She was armed with a main battery of four 432 mm (17 in) guns mounted in a central barbette and was capable of a top speed of 17.8 knots. Unlike other capital ships of the era, Lepanto had an armored deck rather than the more typical belt armor.

Italian corvette <i>Cristoforo Colombo</i> (1892) Screw corvette of the Italian Regia Marina

Cristoforo Colombo was a steel-hulled corvette built in the early 1890s for the Italian Regia Marina. The ship was built as a replacement for an earlier vessel of the same name, based on a nearly identical design. The new ship was intended to serve in Italy's colonial empire in eastern Africa, and was designed to be able to operate at long range, far from home ports, for an extended period of time.

Italian cruiser <i>Lombardia</i> Protected cruiser of the Italian Royal Navy

Lombardia was a protected cruiser of the Italian Regia Marina built in the 1890s. The ship was the second of six vessels in its class, but was the first to enter service. Named for the region of Lombardy, she was laid down in November 1889, was launched in July 1890, and was completed in February 1893. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots.

Italian cruiser <i>Elba</i> Protected cruiser of the Italian Royal Navy

Elba was a protected cruiser of the Italian Regia Marina. She was the fifth of six Regioni-class ships, all of which were named for regions of Italy, with the exception of Elba, which was named for the island. Elba was built by the Regio Cantieri di Castellammare di Stabia; her keel was laid in September 1890, she was launched in August 1893, and she was commissioned in February 1896. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of nearly 18 knots.

Italian cruiser <i>Coatit</i> Torpedo cruiser of the Italian Royal Navy

Coatit was a torpedo cruiser of the Italian Regia Marina built in the late 1890s. She was the second and final member of the Agordat class. The ship, which was armed with twelve 76 mm (3 in) guns and two 450 mm (17.7 in) torpedo tubes, was too slow and short-ranged to be able to scout effectively for the fleet, so her career was limited. She saw action during the Italo-Turkish War in 1911–1912, where she provided gunfire support to Italian troops in North Africa. She also caused a minor diplomatic incident from an attack on retreating Ottoman soldiers in Anatolia. Coatit was part of an international fleet sent to Constantinople when the city appeared to be at risk of falling to the Bulgarian Army during the First Balkan War. In 1919, she was converted into a minelayer and was sold for scrap in 1920.

<i>Agordat</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Agordat class was a pair of torpedo cruisers built by the Italian Regia Marina in the late 1890s. The two ships, Agordat and Coatit, were armed with twelve 76 mm (3 in) guns and two 450 mm (17.7 in) torpedo tubes. They proved to be too slow and have too short a cruising radius to be of much use, so their service careers were limited. Their most significant action came during the Italo-Turkish War of 1911–1912, where both ships were employed in shore bombardment duties. Neither ship saw action in World War I. Coatit was converted into a minelayer in 1919 and sold for scrapping the following year, while Agordat was rearmed as a gunboat in 1921; she followed her sister to the breakers in 1923.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Caprera</i> Torpedo cruiser of the Italian Royal Navy

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Saetta</i> Torpedo cruiser of the Italian Royal Navy

Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina in the 1880s. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in May 1887, and was completed in February 1888. Saetta spent the first decade of her career serving in the main Italian fleet, where she conducted peacetime training exercises. In 1897, she was withdrawn from front-line service and employed as a gunnery training ship, a role she filled for another decade. The Regia Marina ultimately sold Saetta for scrap in May 1908.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Monzambano</i> Torpedo cruiser of the Italian Royal Navy

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina in the 1880s. The ship was built at the Arsenale di La Spezia, beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

<i>Goito</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Goito class was a group of four torpedo cruisers built for the Italian Regia Marina in the 1880s. The members of the class were Goito, Montebello, Monzambano, and Confienza. They were among the first torpedo cruisers built for the Italian fleet, and were built to improve on the previous vessel, Tripoli. Experimental ships, the four Goito-class vessels varied in their dimensions, machinery, and armament, though all were comparable in terms of capabilities, having a top speed of 17 to 18 knots and carrying an armament of four or five 14-inch (360 mm) torpedo tubes.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

Italian corvette <i>Amerigo Vespucci</i> Screw corvette of the Italian Regia Marina

Amerigo Vespucci was a screw corvette of the Italian Regia Marina built in the late 1870s and early 1880s.

Italian corvette <i>Caracciolo</i> (1869)

Caracciolo was a screw corvette of the Italian Regia Marina built in the 1860s. She was the first vessel of that type built after the unification of Italy, though the Italian fleet inherited several screw corvettes from the navies of Naples, Tuscany, and Sardinia. The ship was armed with a main battery of six 160 mm (6.3 in) guns. Originally built with both steam and sail propulsion, Caracciolo later had her engine removed for use as a training ship.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.