JTES, the Japanese Teletext Specification, is a protocol used for encoding teletext pages, as well as other types of digital data, within the vertical blanking interval (VBI) of an analog video signal in Japan. It was adopted into the international standard CCIR 653 (now ITU-R BT.653) of 1986 as CCIR Teletext System D. [1] [2]
It supports the display of Kanji, Katakana and Hiragana characters. The service can be used to display subtitles, cyclic text pages or pseudo interactive programs. There's support for presentation of photographs, geometry or sound. [1] [3]
The development of teletext in Japan started in 1972, [4] followed by the announcement of the world's first teletext system (Ceefax) by the BBC in the United Kingdom.
Because Japanese characters are different from the western alphabets, Japan proceeded with research and development of a specific transmissions method. Called "pattern method", [5] it sends scanning signals similar to a fax, at a rate 20 times faster than existing methods, but required a character generator with a large (at the time) 1-megabit ROM. This method was adopted in 1982.
The first receiver prototype was capable of displaying 1258 characters, and a 48-kilobyte character generation ROM, integrated into a single chip. During the 1970s the problem of error correction (causing wrong characters to be displayed) was studied. These problems were solved in the early 1980s, allowing the service to start. [4]
An alternative method of transmission, called "hybrid method" was developed by NHK in 1979. It allowed faster transmissions rated, and was adopted as a standard in October 1985. [5]
Experimental broadcasts started on October 3, 1983, by NHK in Tokyo and Osaka using the "pattern method". [3] [5] [6] This included subtitles and other so called "supplementary" or "independent programs", where information unrelated to the TV program being show is displayed. [7] For example, at the time of the Great Hanshin Earthquake, information about vital services and victim names was broadcast for days. [7] To accompany the introduction of the system, Sony released the "TXT-10" decoder with a cost of 119,000 yen, and Sharp released "21C-L1", a TV with a built in decoder.
In 1984 Nippon TV (NTV) experimented teletext between March and July.
Regular transmissions started on November 29, 1985 (covering the entire country by 1986) by NHK ("Telemo Japan" service) and NTV ("AXES4" service), using the "hybrid method". [8] [9] NHK broadcast 759 hours of teletext per week during 1985, with eight different programs such as news, weather, public announcements and subtitles. [5]
In 1986, TV Asahi started broadcasts with a service named "TV Asahi Data Vision", that remained active up to 24 July 2011. Other channels, such as Tokyo Broadcasting System (TBS) with "Tokyo Data Vision" or TV Tokyo with "Nikkei Telepress", along with Fuji TV and Tokyo Metropolitan Television also had teletext services.
As of 1995, 20 television models with built-in teletext receivers were available in the Japanese market.
In a normal NTSC video signal there are 525 scan lines of video signal. These are split into two half-images, known as "fields", sent every 60th of a second. These images merge on-screen, and in-eye, to form a single frame of video updated every 30th of a second. Each line of each field takes 63.5 μs to send; 50.3 μs of video and 13.2 μs amount of "dead time" on each end used to signal the television that the line is complete, known as the horizontal blanking interval (HBI). When the scanning process reaches the end of the screen it returns to the top during the vertical blanking interval (VBI), which, like the HBI requires some "dead time" to properly frame the signal on the screen. In this case, the dead time is represented by unused lines of the picture signal, normally the top 22 lines of the frame.
At the beginning of the service, JTES used four of these lines to transmit information, with 176 bits of data transmitted per scanning line.
JTES encodes data into the video signal as a series of dots at a fixed rate of 5.727272 Mbit/s. Each line of a field has 50.3 μs of video area that can be used for transmission, which results in 296 bits per line. [1]
It's possible to change the character code set (JIS C 6226 Japanese Industrial Standard, containing 6879 graphic characters suitable for writing text, place names, personal names, etc. in the Japanese language, defined in 1978), in order to express appropriate characters or enhance transmission efficiency. If a character is not available in the teletext receiver character generator, it can be created using "DRCS" (Dynamically Redefinable Character Sets). [3] [10]
Characters can be transmitted as a mosaic of semigraphic elements, with each element having a resolution of 8 × 12 pixels. [10] [11]
There was support for sound generation using the YM2413 sound chip. [12] Yet sound and images could be transmitted using PCM, using an error correction system called "BEST". [13]
Several information codings are possible: [14]
Phase Alternating Line (PAL) is a colour encoding system for analog television. It was one of three major analogue colour television standards, the others being NTSC and SECAM. In most countries it was broadcast at 625 lines, 50 fields per second, and associated with CCIR analogue broadcast television systems B, D, G, H, I or K. The articles on analog broadcast television systems further describe frame rates, image resolution, and audio modulation.
NAPLPS is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems.
Telidon was a videotex/teletext service developed by the Canadian Communications Research Centre (CRC) during the late 1970s and supported by commercial enterprises led by Infomart in the early 1980s. Most work on the system ended after 1985, having failed to build critical mass.
Ceefax was the world's first teletext information service and a forerunner to the current BBC Red Button service. Ceefax was started by the BBC in 1974 and ended, after 38 years of broadcasting, at 23:32:19 BST on 23 October 2012, in line with the digital switchover being completed in Northern Ireland.
Integrated Services Digital Broadcasting is a Japanese broadcasting standard for digital television (DTV) and digital radio.
In a raster scan display, the vertical blanking interval (VBI), also known as the vertical interval or VBLANK, is the time between the end of the final visible line of a frame or field and the beginning of the first visible line of the next frame or field. It is present in analog television, VGA, DVI and other signals.
Broadcasttelevision systems are the encoding or formatting systems for the transmission and reception of terrestrial television signals.
In television technology, Wide Screen Signaling (WSS) is digital metadata embedded in invisible part of the analog TV signal describing qualities of the broadcast, in particular the intended aspect ratio of the image. This allows television broadcasters to enable both 4:3 and 16:9 television sets to optimally present pictures transmitted in either format, by displaying them in full screen, letterbox, widescreen, pillar-box, zoomed letterbox, etc.
Antiope was a French teletext standard in the 1980s. It also formed the basis for the display standard used in the French videotex service Minitel. The term allegedly stood for Acquisition Numérique et Télévisualisation d’Images Organisées en Pages d’Écriture, which could be loosely translated as Digital Acquisition and Remote Visualization of Images Organized into Written Pages.
NABTS, the North American Broadcast Teletext Specification, is a protocol used for encoding NAPLPS-encoded teletext pages, as well as other types of digital data, within the vertical blanking interval (VBI) of an analog video signal. It is standardized under standard EIA-516, and has a rate of 15.6 kbit/s per line of video. It was adopted into the international standard CCIR 653 of 1986 as CCIR Teletext System C.
Teletext, or broadcast teletext, is a standard for displaying text and rudimentary graphics on suitably equipped television sets. Teletext sends data in the broadcast signal, hidden in the invisible vertical blanking interval area at the top and bottom of the screen. The teletext decoder in the television buffers this information as a series of "pages", each given a number. The user can display chosen pages using their remote control. In broad terms, it can be considered as Videotex, a system for the delivery of information to a user in a computer-like format, typically displayed on a television or a dumb terminal, but that designation is usually reserved for systems that provide bi-directional communication, such as Prestel or Minitel.
1seg is a mobile terrestrial digital audio/video and data broadcasting service in Japan, Argentina, Brazil, Chile, Uruguay, Paraguay, Peru and the Philippines. Service began experimentally during 2005 and commercially on April 1, 2006. It is designed as a component of ISDB-T, the terrestrial digital broadcast system used in those countries, as each channel is divided into 13 segments, with a further segment separating it from the next channel; an HDTV broadcast signal occupies 12 segments, leaving the remaining (13th) segment for mobile receivers, hence the name, "1seg" or "One Seg".
World System Teletext (WST) is the name of a standard for encoding and displaying teletext information, which is used as the standard for teletext throughout Europe today. It was adopted into the international standard CCIR 653 of 1986 as CCIR Teletext System B.
Norpak Corporation was a company headquartered in Kanata, Ontario, Canada, that specialized in the development of systems for television-based data transmission. In 2010, it was acquired by Ross Video Ltd. of Iroquois and Ottawa, Ontario.
Analog high-definition television has referred to a variety of analog video broadcast television systems with various display resolutions throughout history.
MUSE, commercially known as Hi-Vision was a Japanese analog high-definition television system, with design efforts going back to 1979.
B-MAC is a form of analog video encoding, specifically a type of Multiplexed Analogue Components (MAC) encoding. MAC encoding was designed in the mid 80s for use with Direct Broadcast Satellite systems. Other analog video encoding systems include NTSC, PAL and SECAM. Unlike the FDM method used in those, MAC encoding uses a TDM method. B-MAC was a proprietary MAC encoding used by Scientific-Atlanta for encrypting broadcast video services; the full name was "Multiple Analogue Component, Type B".
Television in Japan was introduced in 1939. However, experiments date back to the 1920s, with Kenjiro Takayanagi's pioneering experiments in electronic television. Television broadcasting was halted by World War II, after which regular television broadcasting began in 1950. After Japan developed the first HDTV systems in the 1960s, MUSE/Hi-Vision was introduced in the 1970s.
Clear-Vision is a Japanese EDTV television system introduced in the 1990s, that improves audio and video quality while remaining compatible with the existing broadcast standard. Developed to improve analog NTSC, it adds features like progressive scan, ghost cancellation and widescreen image format. A similar system named PALPlus was develop in Europe with the goal of improving analog PAL broadcasts.