Kitson and Company

Last updated

Kitson and Company was a locomotive manufacturer based in Hunslet, Leeds, West Yorkshire, England.

Contents

Early history

Kitson 0-6-0 "Austin I" built in 1932 Kitson-Austin1.JPG
Kitson 0-6-0 "Austin I" built in 1932

The company was started in 1835 by James Kitson at the Airedale Foundry, off Pearson Street, Hunslet, with Charles Todd as a partner. Todd had been apprenticed to Matthew Murray at the Round Foundry in Holbeck, Leeds.

Initially, the firm made parts for other builders, until it was joined in 1838 by David Laird, a wealthy farmer who was looking for investments, and the company became Todd, Kitson and Laird. That year saw the production of the company's first complete locomotives, either for the North Midland or the Liverpool and Manchester Railway. However, Todd left almost immediately to form Shepherd and Todd, and the company was known variously as Kitson and Laird or Laird and Kitson.

The order for six engines by the Liverpool and Manchester began with 0-4-2 Lion , which still exists. Around 1858, it was withdrawn from service and sold to the Mersey Docks and Harbour Board, where it was jacked-up off its wheels and used for pumping water. In 1930, it was restored and remains in preservation at the Museum of Liverpool.

In 1842, Laird, who not receiving the financial return he expected, left the partnership. Kitson was then joined by Isaac Thompson and William Hewitson, the company becoming Kitson Thompson and Hewitson. In 1851, the company exhibited an early tank locomotive at The Great Exhibition, and was awarded a gold medal. [1] In 1858, Thompson left and the firm became Kitson and Hewitson, then, finally, Kitson and Company in 1863 when Hewitson died.

The company built about 5,400 locomotives over a period of 101 years, with orders for British railways, including the Midland Railway, the Lancashire and Yorkshire Railway and the South Eastern Railway, and worldwide. From 1855 many Indian railways became major customers. [2]

From 1866 Kitson's produced a large proportion of the Midland Railway double-framed goods engines designed by Matthew Kirtley and from 1869 began building a series of engines for Russia. At some time prior to 1884 the factory employed Charles Algernon Parsons OM KCB FRS (13 June 1854 – 11 February 1931) who was engaged in building rocket-powered torpedoes. After leaving Kitsons, the brilliant Parsons went on to invent the steam turbine and change the world forever. In 1886 Kitson's assisted its representative E. Jeffreys in the preparation of five designs for the Victorian Railways (Australia), each with standardised components which were interchangeable between the classes.

Manufacture of these locomotives was by Victorian colonial builders, except for two examples built at Kitson's Airedale Foundry, Leeds, and exhibited at the Melbourne Centennial Exhibition, held in the Royal Exhibition Building in Melbourne in 1888, for which the firm received the First Order of Merit in the English Court. The locomotives were a large 0-6-0 and a suburban 2-4-2T. [3] The Kitson designs influenced the Victorian Railways for many years. Kitson built a large order of 4-6-0s for the Cordoba Railway in Argentina during 1889–91, which were among the earliest British examples of this type. [2]

From 1876 to 1901 the firm also built over 300 steam tram engines and steam railmotor units, which were developed from a design by W. R.Rowan. [2] [4] [5]

Kitson-Meyer

An innovation was the articulated locomotive design proposed by Robert Stirling based on the Meyer locomotive, later known as the Kitson-Meyer. The first three were built in 1894 for the Anglo-Chilian Nitrate & Railway Company in Chile, with two in 1903 for Rhodesia and three in 1904 for Jamaica. Over 50 were built, some 2-8-8-0 and 2-8-8-2 , the last being in 1935. There were also some 0-8-6-0 s designed for rack railway working in the Andes, two examples of which survive in Chile, and one in Argentina. [6] [7]

Later history and closure

Kitsons were busy during the First World War, but trade dropped off in the 1920s. The experimental Kitson-Still 2-6-2 T steam diesel hybrid locomotive, combining steam power with internal combustion, was tested on the London and North Eastern Railway (LNER) between York and Hull. This hauled revenue-earning trains for the LNER, but Kitson's could not afford to develop it into a commercially viable form. The high research and development costs contributed to the demise of Kitson & Co.

In 1922, Kitsons built the six K class 2-8-4 T locomotives for Palestine Railways to work the steep gradients between Lydda and Jerusalem. [8]

Kitson's last large order in 1924 was for 12 London and North Eastern Railway Improved Director class locomotives. In 1934, the receivers were called in and the company struggled on under receivership until 1937. In 1937, the firm was restructured to bring it out of receivership. [9] The downsized company ceased locomotive production in 1938. The patterns, drawings and goodwill of Kitson's locomotive building business were acquired by Robert Stephenson and Hawthorns. Kitsons continued to supply locomotive components until 1945 when the remaining business and works was sold to J&H McLaren & Co. [10] [11]

Preservation

Some Kitson locomotives have been preserved, they are listed below

Steam

Bibliography

Related Research Articles

Brush Traction was a manufacturer and maintainer of railway locomotives in Loughborough, England whose operations have now been merged into the Wabtec company's Doncaster UK operations.

<span class="mw-page-title-main">Hunslet Engine Company</span> English rolling stock manufacturer

The Hunslet Engine Company is a locomotive building company, founded in 1864 in Hunslet, England. It manufactured steam locomotives for over 100 years and currently manufactures diesel shunting locomotives. The company owns a substantial fleet of Industrial and depot shunting locomotives which are available for hire. The company is part of Ed Murray & Sons Ltd.

<span class="mw-page-title-main">Barrow Hill Roundhouse</span> Former Midland Railway roundhouse in Barrow Hill, Derbyshire

Barrow Hill Roundhouse, until 1948 known as Staveley Engine Shed, is a former Midland Railway roundhouse in Barrow Hill, near Staveley and Chesterfield, Derbyshire, now serving as a railway heritage centre.

<span class="mw-page-title-main">Andrew Barclay Sons & Co.</span> UK locomotive manufacturer

Andrew Barclay Sons & Co., currently operating as Brodie Engineering, is a railway engineering company, specializing in the heavy maintenance, refurbishment and overhauls for both passenger and freight rolling stock. Based around its works at Kilmarnock, it is the only active rail engineering business in Scotland.

<span class="mw-page-title-main">0-4-2</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 0-4-2 represents the wheel arrangement with no leading wheels, four powered and coupled driving wheels on two axles and two trailing wheels on one axle. While the first locomotives of this wheel arrangement were tender engines, the configuration was later often used for tank engines, which is noted by adding letter suffixes to the configuration, such as 0-4-2T for a conventional side-tank locomotive, 0-4-2ST for a saddle-tank locomotive, 0-4-2WT for a well-tank locomotive and 0-4-2RT for a rack-equipped tank locomotive.

A Meyer locomotive is a type of articulated locomotive that has two separate bogies, upon which the boiler and firebox swivel. The design was never as popular as the Garratt or Mallet locomotives. It can be best regarded as 19th Century competition for the early compound Mallet and also the Fairlie articulated designs. Most single cab modern trains are of a similar design such as power cars, freight diesel locomotives, and some passenger locomotives.

LMR 57 <i>Lion</i> Liverpool and Manchester Railway steam locomotive

The Liverpool and Manchester Railway (LMR) 57 Lion is an early 0-4-2 steam locomotive, which had a top speed of 40 mph (64 km/h) and could pull up to 200 tons. One of a pair designed for hauling freight, Lion was built by Todd, Kitson & Laird of Leeds in 1838. It featured in the 1953 Ealing comedy, The Titfield Thunderbolt.

<span class="mw-page-title-main">Yorkshire Engine Company</span> Rolling stock manufacturer

The Yorkshire Engine Company (YEC) was a small independent locomotive manufacturer in Sheffield, England. The company was formed in 1865 and produced locomotives and carried out general engineering work until 1965. It mainly built shunting engines for the British market, but also built main line engines for overseas customers.

Robert Stephenson and Hawthorns Ltd (RSH) was a locomotive builder with works in North East England.

<span class="mw-page-title-main">Manning Wardle</span>

Manning Wardle was a steam locomotive manufacturer based in Hunslet, Leeds, West Yorkshire, England.

The Railway Foundry, Leeds, was a railway engineering workshop off Pearson Street, in Hunslet, Leeds, West Yorkshire, England. It was established in 1838 by Shepherd and Todd. Charles Todd had been a partner in Todd, Kitson & Laird but left to set up his own business in 1838, setting up the Railway Foundry with a Mr. Shepherd to build locomotives and rolling stock.

<span class="mw-page-title-main">E. B. Wilson and Company</span> British locomotive manufacturer

E. B. Wilson and Company was a locomotive manufacturing company at the Railway Foundry in Hunslet, Leeds, West Yorkshire, England.

<span class="mw-page-title-main">John Fowler & Co.</span> Steam engineering company founded by John Fowler

John Fowler & Co Engineers of Leathley Road, Hunslet, Leeds, West Yorkshire, England produced traction engines and ploughing implements and equipment, as well as railway equipment. Fowler also produced the Track Marshall tractor which was a tracked version of the Field Marshall. British Railways Engineering Department locomotives ED1 to ED7 were built by Fowler

Railmotor is a term used in the United Kingdom and elsewhere for a railway lightweight railcar, usually consisting of a railway carriage with a steam traction unit, or a diesel or petrol engine, integrated into it.

<span class="mw-page-title-main">J&H McLaren & Co.</span>

J&H McLaren was a British engineering company in Hunslet, Leeds, England, that manufactured traction engines, stationary engines and later, diesel engines.

<span class="mw-page-title-main">Thomas Green & Son</span>

Thomas Green & Son, Ltd. were engineers who manufactured a wide range of products at the Smithfield Foundry, Leeds, United Kingdom

<span class="mw-page-title-main">Tram engine</span>

A tram engine is a steam locomotive specially built, or modified, to run on a street, or roadside, tramway track.

<span class="mw-page-title-main">0-6-0+0-6-0</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 0-6-0+0-6-0 represents the wheel arrangement of an articulated locomotive with two separate swivelling engine units, each unit with no leading wheels, six powered and coupled driving wheels on three axles and no trailing wheels. The arrangement is effectively two 0-6-0 locomotives operating back-to-back and was used on Garratt, Double Fairlie, Meyer and Kitson-Meyer articulated locomotives. A similar arrangement exists for Mallet steam locomotives on which only the front engine unit swivels, but these are referred to as 0-6-6-0.

<span class="mw-page-title-main">Victorian Railways Y class</span>

The Victorian Railways Y class was a class of 0-6-0 steam locomotives.

References

  1. "Prize lists of the Great Exhibition". Daily News. No. 1684. London, England. 16 October 1851.
  2. 1 2 3 "Kitsons of Leeds: locomotive builders". Steamindex.com. 3 January 2008. Retrieved 31 March 2010.
  3. Norman Cave, John Buckland, David Beardsell (2002). Steam Locomotives of the Victorian Railways: Vol.1: The First Fifty Years Australian Railways Historical Society, Melbourne, Vic.; ISBN   1-876677-38-4, p. 128
  4. Australian Railway Historical Society Bulletin, February, 1962 pp. 26–29
  5. "Tramway Historical Society". Ferrymeadtramway.org.nz. Retrieved 31 March 2010.
  6. "Santiago Railway Museum Chile – Museo Ferroviario de Santiago Chile". Lcgb.org.uk. 19 November 2006. Archived from the original on 12 October 2009. Retrieved 31 March 2010.
  7. "Kitson-Meyer". Kitson-Meyer. Archived from the original on 28 October 2008. Retrieved 31 March 2010.
  8. Cotterell, Paul (1984). The Railways of Palestine and Israel. Abingdon: Tourret Publishing. p. 48. ISBN   0-905878-04-3.
  9. Railway Gazette, 25 July 1937.
  10. John Pease. The History of J. & H. McLaren of Leeds: Steam & Diesel Engine Makers; ISBN   1-84306-105-8
  11. Kitson & Co., leedsengine.info. Accessed 19 November 2022.
  12. J & A Brown No. 21/23., australiansteam.com. Accessed 14 April 2024.