The Konica Hexar RF is a 35 mmrangefinder camera which was sold by Konica. It was introduced to the market on 13 October 1999.[1] and subsequently discontinued (apparently without official notice) some time before the end of 2003.[1] The camera used the "Bayonet Konica KM-mount", a copy of the Leica M-mount, thus sharing interchangeable lenses with those designed for Leica cameras and others compatible with them. The Hexar RF has a combined rangefinder/viewfinder modeled on that of Leica cameras, a similar body shape and size - and so is similar to Leica M-mount cameras in many aspects of operation.
The Konica Hexar RF accepts lenses designed for the "Bayonet Konica KM-mount" a copy of the Leica M-mount. Because of this, the Hexar RF can mount and focus lenses designed for the Leica and other compatible M-mount cameras or, when used with an adapter, the earlier Leica thread mount lenses (note that due to physical constraints there is no adapter to allow bayonet mount lenses to be fitted to a Leica screw-mount camera).
When first released there was some controversy and discussion about whether the "Bayonet Konica KM-mount" of the Hexar RF was, in fact, fully compatible with the Leica M-mount.[2] Some earlier testers reported problems using Leica lenses on Hexar RF cameras. Konica made no comment on the issue, and continued to refer to their lens mount by their own name, with no reference to Leica.[1]
Other testers found no problems, and suggested that early reports may have related problems with early-production samples or to cameras at one end of a tolerance range matched with lenses at the other, and so claimed there was no systemic problem. The latter seems to have become the consensus view. Many users report using Leica and Konica lenses and cameras interchangeably with good results, including lenses of longer focal length or wider maximum aperture where problems are more likely to be encountered.[3]
Viewfinder/Rangefinder
Hexar RF with 35mm lens, showing viewfinder (on right) and second window for split image rangefinder
The Konica Hexar RF camera uses a viewfinder combined with a lens-coupled "split-image and double image rangefinder" with illuminated, parallax-corrected, brightline framelines. As such it is very similar to the viewfinder/rangefinder of Leica M-mount cameras (if, perhaps, not as bright).
The brightline framelines that show in the viewfinder are selected from one of three frameline pairings, depending on the lens (or lens adapter) mounted on the camera:
50mm and 75mm
28mm and 90mm
35mm and 135mm
These pairings are the same as those used for later Leica M series camera viewfinders (Leica M4-P and subsequent models) and use the same frameline selection mechanism at the lens mount. A frameline preview lever on the front of the camera allows for temporary selection of a frameline pair other than the one selected by the mounted lens. The .60x magnification used in the Hexar RF viewfinder allows for all framelines to be easily seen, including by those wearing eyeglasses - even the 28mm frameline (the largest). This also allows for generous amounts of "outside the frame" space in the viewfinder for other focal lengths, which can aid photographic composition. However, the reduced apparent size of the viewfinder image can make composing and accurate focus more difficult when using longer focal lengthlenses. (Note, by way of contrast, that the "standard" Leica viewfinder magnification has been .72x from the Leica M2 onwards, with .58x and .85x as options on more recent models including the current M7 and MP models.)
Camera body
The Konica Hexar RF is similar in form-factor to Leica M-mountcameras, being slightly larger than the archetypal Leica M3 design in all dimensions, and just slightly heavier when batteries are fitted. Body construction is a cast-aluminium chassis with titanium top and bottom plates, finished in flat black, with a rubberised cover and slightly raised hand-grip. The chassis of the Hexar RF appears to be identical to that used by the Contax G2, with different top and bottom plates and similar but not identical film transport and shutter mechanisms. While the Hexar RF appears in some ways similar to the earlier auto-focus Konica Hexar camera, it seems to share few if any components with that camera.
Major controls, including shutter release button, surrounding off/mode switch, film-speed/exposure-compensation dial and shutter speed dial are located on the right-hand side of the top plate, as seen from the rear, as is the LCD displaying the current frame count. The viewfinder is located on the upper left-hand side of the camera. The manual rewind button, release catch for the camera back and cable release socket are on the left-hand side of the camera. The lens mount release and frameline preview lever are located on the front of the camera. The bottom plate has the cover for the batteries and a tripod socket.
Film transport
The Konica Hexar RF has a hinged, swing-open, camera back with cut-out view window to show the film loaded in the camera. Film loading, advance and rewind is motorised and automatic. A button to manually trigger film rewind is also provided. Film sensitivity can be detected via standard DX encoding or the ISO value can be selected manually.
Film is automatically advanced to the next frame (and the shutter cocked) after each shutter activation. Shutter release and film advance are as described under shutter below. When the end of a film is reached (or the manual rewind button pressed), the film is wound back into the film canister, with a brief pause to allow the film to be removed "leader out" if desired.
Film transport is very different from Leica M-mount film cameras, which require manual film handling through a removable bottom plate and flip-up camera back, with film advance and rewind using manual levers and rewind cranks.
Shutter
The Konica Hexar RF has a metal, vertical travel, focal plane shutter with digital electronic control of shutter speed. There is no provision for non-electronic shutter release: charged batteries are always required for shutter operation.
Shutter speeds between 16 seconds and 1/4000th of a second (continuous) are supported in aperture priority auto-exposure metering mode. Shutter speeds from one second to 1/4000th of a second (in discrete steps) may be selected in manual exposure mode. A bulb (B) mode is also supported (the shutter remains open while shutter release is activated).
Shutter release modes (and film advance) are controlled by a 4-position switch surrounding the top-mounted shutter release button. Positions are:
off the camera is off (the LCD frame counter remains on while batteries are present, giving an indication that batteries are charged).
single-shot the shutter is released and one frame advanced each time the shutter release is activated
continuous the shutter is released and film advanced for as long as the shutter release is activated, at approximately 2.5 frames per second
self-timer the shutter is released, and one frame advanced, 10 seconds after shutter release is activated
Shutter release is activated by pressing the top-mounted shutter release button or by a cable release inserted in a standard socket located on the side of the camera.
Exposure metering
The Konica Hexar RF meters for exposure either by aperture priority auto-exposure (with AE lock and +/-2EVexposure compensation) or in metered-manual mode. Aperture priority is selected by setting the shutter speed dial to either the AE or AE lock position. Manual exposure is set by selecting a specific shutter speed on the shutter speed dial (there is a central interlock button to prevent accidentally moving the dial from the AE modes to a manually selected shutter speed).
Exposure metering is through-the-lens (TTL) and thus accounts for the aperture set on the lens in use. (Unlike SLR lenses, where the diaphragm controlling lens aperture is generally closed only at the time of shutter release, rangefinder camera lenses close or open the diaphragm directly as the aperture control is applied).
The Konica Hexar RF was sold either "body only" or as a set in a presentation box containing the Konica Hexar RF camera, an M-Hexanon 50mm f2 lens and an HX-18 electronic flash unit (along with a manual and accessories including a camera strap, body cap and front and rear lens caps).
Konica M-Hexanon lenses
Konica 28mm, 35mm and 50mm M-Hexanon lenses
The original release of the Konica Hexar RF camera was accompanied by the release of three "Konica KM-bayonet mount" lenses for use on Konica RF cameras and others, such as Leica, with compatible lens mounts. These lenses were in 50mm, 28mm and 90mm focal lengths.
Subsequently, in 2001, an M-Hexanon 35mm f2 lens was released,[4] and a new-model 50mm f1.2 lens was produced, for release only with a 2001-release limited-edition version of the Hexar RF camera.
In 2002 a dual focal lengthlens, the "M-Hexanon Dual Lens 21-35mm/F3.4-4" was introduced.[5] Altogether, the range of "Bayonet Konica KM-mount" lenses produced consists of:
Konica's Leica-mount Hexanon lenses (whether Leica M-mount or Leica thread mount) are considered to have optical and build qualities of a high standard: not dissimilar to those produced by Leica and Carl Zeiss. Konica's lenses were even used as a reference for the Japanese Ministry of Industry as the benchmark against other manufacturers' lenses [citation needed]. Production of M-Hexanon lenses seems to have ceased around the same time as Konica's Hexar RF production was terminated (2003).
Other Konica rangefinder lenses
Konica produced rangefinder lenses for the Leica mount in the 1950s and produced a series of so-called "L-mount" lenses, in limited quantities, for the same mount in the late 1990s through 2001.
Konica produced a chrome-finish Hexar RF Limitedcamera, targeted for the year 2001 (the new millennium) in a limited release of 2001 units, supplied in a boxed set including a new M-Hexanon 50mm f1.2 lens and HX-18 flash.[1] The lens was only manufactured for this set, so examples are unavailable except in conjunction with the limited-edition kit or the (apparently few) occasions where components of the kit have been separated. This means that most are held by collectors or those willing to pay "collectible" prices.
Hexar RF Half-Frame
At some phase of the production of the Hexar RF, Konica made 50 units of a half-frame variant of the camera[7] named Hexar 72.
Successors
Production of the Konica Hexar RF camera was discontinued, without official announcement, some time before the end of 2003.[1]Konica and Minolta (who had previously manufactured the Leitz/Minolta CL and Minolta CLEM-mount cameras) merged to form Konica Minolta in 2003.[8] In 2006 Sony acquired photographic assets from Konica Minolta, with the latter company withdrawing from all photography-related activity.[9] The targets of the acquisition by Sony were the designs and tooling for Minolta/Konica MinoltaSLR cameras and accessories. It is not known whether Sony acquired other photographic assets such as rangefinder camera designs or whether those are retained by Konica Minolta. Whatever the case, none of the involved companies has expressed any interest in renewed production of rangefinder cameras or lenses.
Konica Minolta has since announced[10] "Konica Minolta ceased the entire customer services for Konica Minolta cameras and related products, as of 31 December 2010." It appears that services such as downloads for camera manuals were withdrawn at roughly the time of this announcement.
Related Research Articles
A single-lens reflex camera (SLR) is a camera that typically uses a mirror and prism system that permits the photographer to view through the lens and see exactly what will be captured. With twin lens reflex and rangefinder cameras, the viewed image could be significantly different from the final image. When the shutter button is pressed on most SLRs, the mirror flips out of the light path, allowing light to pass through to the light receptor and the image to be captured.
A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus. Most varieties of rangefinder show two images of the same subject, one of which moves when a calibrated wheel is turned; when the two images coincide and fuse into one, the distance can be read off the wheel. Older, non-coupled rangefinder cameras display the focusing distance and require the photographer to transfer the value to the lens focus ring; cameras without built-in rangefinders could have an external rangefinder fitted into the accessory shoe. Earlier cameras of this type had separate viewfinder and rangefinder windows; later the rangefinder was incorporated into the viewfinder. More modern designs have rangefinders coupled to the focusing mechanism so that the lens is focused correctly when the rangefinder images fuse; compare with the focusing screen in non-autofocus SLRs.
Zorki is the name of a series of 35mm rangefinder cameras manufactured in the Soviet Union between 1948 and 1978.
Minolta Co., Ltd. was a Japanese manufacturer of cameras, camera accessories, photocopiers, fax machines, and laser printers. Minolta Co., Ltd., which is also known simply as Minolta, was founded in Osaka, Japan, in 1928 as Nichi-Doku Shashinki Shōten. It made the first integrated autofocus 35 mm SLR camera system. In 1931, the company adopted its final name, an acronym for "Mechanism, Instruments, Optics, and Lenses by Tashima".
Konica was a Japanese manufacturer of, among other products, film, film cameras, camera accessories, photographic and photo-processing equipment, photocopiers, fax machines and laser printers, founded in 1873. The company merged with Japanese peer Minolta in 2003, with the new company named Konica Minolta.
The Leica M3 is a 35 mm rangefinder camera by Ernst Leitz GmbH, introduced in 1954. It was a new starting point for Leitz, which until then had only produced screw-mount Leica cameras that were incremental improvements to its original Leica (Ur-Leica). The M3 introduced several features to the Leica, among them the combination of viewfinder and rangefinder in one bright window, like on the Contax II, a bayonet lens mount, and rapid film advance lever. It was the most successful model of the M series, with over 220,000 units sold by the time production of the M3 model ended in 1966.
The Minolta XG-M was a 35mm single-lens reflex camera introduced in 1981 by Minolta of Japan. It was also known as the X-70 on the Japanese market, in which it was not available until 1982. When released, it was the top model in Minolta's XG series of consumer-grade manual focus SLRs, replacing the XG-9. Changes from that model included a metered manual mode, and a revised body style with rearranged controls. This was also the first camera to use Minolta's new logo, which was used until the 2003 merger into Konica Minolta.
The Minolta A-mount camera system was a line of photographic equipment from Minolta introduced in 1985 with the world's first integrated autofocus system in the camera body with interchangeable lenses. The system used a lens mount called A-mount, with a flange focal distance 44.50 mm, one millimeter longer, 43.5 mm, than the previous SR mount from 1958. The new mount was wider, 49.7 mm vs. 44.97 mm, than the older SR-mount and due to the longer flange focal distance, old manual lenses were incompatible with the new system. Minolta bought the autofocus technology of Leica Correfot camera which was partly used on the a-mount autofocus technology. The mount is now used by Sony, who bought the SLR camera division from Konica Minolta, Konica and Minolta having merged a few years before.
The Leica M mount is a camera lens mount introduced in 1954 with the Leica M3, and a range of lenses. It has been used on all the Leica M-series cameras and certain accessories up to the current film Leica M-A and digital Leica M11 cameras.
The Leica CL is a 35mm compact rangefinder camera with interchangeable lenses in the Leica M-mount. It was developed in collaboration with Minolta who manufactured it. It first appeared in April 1973 and was released in the Japanese market in November 1973 as the Leitz Minolta CL. Both the Leica CL and Leitz Minolta CL were manufactured in a new Minolta factory in Osaka. In 2017, Leica announced a new digital mirrorless camera, again named Leica CL.
The Konica F was the first 35 mm SLR camera produced by Konishiroku, released in February 1960.
The Konica Hexar is a 35 mm fixed-lens, fixed focal length autofocus camera which was produced through the 1990s. It was introduced to the market in 1993. While styled like a rangefinder camera, and intended for a similar style of photography, in specification it is more like a larger "point and shoot" camera.
The Bessa family of cameras was manufactured in Japan by Cosina as a revival of the Voigtländer brand name.
The Minolta CLE is a TTL-metering automatic exposure aperture-priority 35 mm rangefinder camera using Leica M lenses, introduced by Minolta in 1980.
The Leica M5 is a 35 mm camera by Leica Camera AG, introduced in 1971. It was the first Leica rangefinder camera to feature through-the-lens (TTL) metering and the last to be made entirely in Wetzlar by hand using the traditional "adjust and fit" method.
The Kodak Retina Reflex is a discontinued series of four single-lens reflex cameras made by Kodak in Germany between 1957 and 1974, as part of the Kodak Retina line of 35mm film cameras.
The Leicaflex series of high-end single-lens reflex 35 mm format film cameras were introduced by Leitz Camera in 1964. The first camera body was paired with the new R bayonet series of lenses. Three model of the cameras were sold by Leitz; the Leicaflex Standard, the Leicaflex SL and the Leicaflex SL2.
The Nikon 35Ti (1993) and Nikon 28Ti (1994) are luxury titanium-clad point and shoot cameras that were produced by Nikon, equipped with a high-quality lens and body, competing with similar luxury compact cameras produced during the Japanese bubble-economy era, including the Contax T line, Konica Hexar, Leica minilux, Minolta TC-1, Ricoh GR series, and Rollei QZ 35W/35T. Both the 35Ti and 28Ti are 35 mm cameras with nearly identical operation; as the name implies, the 35Ti is equipped with a 35 mm focal length lens, while the 28Ti is equipped with a 28 mm lens. Externally, they may be distinguished by their color: the 35Ti is finished in chrome/silver, and the 28Ti is finished in black.
The Rollei QZ 35W and 35T are luxury titanium-clad point and shoot cameras that were produced by Rollei starting from 1997; they are equipped with a high-quality Rollei VarioApogon lens and body to compete with similar premium compact cameras produced during the Japanese bubble-economy era, including the Contax T line, Konica Hexar, Leica minilux, Nikon 28Ti/35Ti, Minolta TC-1, and Ricoh GR series. Both of the cameras used 35 mm film; the 35W was equipped with a wide-angle zoom lens (28~60 mm), while the 35T was equipped with a standard to short telephoto zoom lens (38~90 mm).
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
