 | This article relies largely or entirely on a single source .(January 2015) |
| LB&SCR H1 class | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Official photograph of No.37 shortly after delivery in 1905. | |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
The London, Brighton and South Coast Railway (LB&SCR) H1 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed by D. E. Marsh and were built by Messrs Kitson and Company in 1905 and 1906.
Prior to taking up office as the Locomotive Superintendent of the LB&SCR in 1905, Marsh had worked for the Great Northern Railway at Doncaster Works. There he had been involved in the design of the Klondyke class designed by Henry Ivatt in 1897. There was an urgent need for new large express passenger locomotives for the LB&SCR, and so he obtained a set of drawings of the large-boilered GNR Atlantics from Doncaster, and made only detailed amendments before ordering them from the manufacturer. He did however increase the boiler pressure from 175 to 200 pounds per square inch (1.21 to 1.38 MPa).
The class soon proved to be successful working the London to Brighton express trains including the heavily loaded Pullman services the "Brighton Limited", and The Southern Belle, which the LB&SCR described as "the most luxurious train in the World".
In May 1920, L. B. Billinton wished to install the Schmidt superheater to improve the efficiency of the class, but was refused permission to do so by the Brighton Locomotive Committee. This modification was however carried out by Richard Maunsell of the Southern Railway during 1925–1926 after the Grouping of 1923.
During 1925 and 1926 the H1 class were gradually replaced on the London-Brighton express trains by the "King Arthur" and "River" classes, but there was still plenty of work for them on other express services, including the boat trains connecting with the Newhaven-Dieppe ferry service.
Following the cessation of the cross-channel ferries after 1940, as a result of the Second World War the class were left with little work to do and several were put into store or else moved to miscellaneous duties in southern England, and the first members of the class were withdrawn in 1944.
In July 1947, No. 2039 was experimentally rebuilt with sleeve valves by Oliver Bulleid as a mobile test bed in preparation for his Leader class locomotives. It was never returned to its original state and in common with the remainder of the class had been withdrawn by 1951. All members of the class were scrapped.
| LB&SC Number | Built | S.R. Number | Name | B.R. Number | Withdrawal |
|---|---|---|---|---|---|
| 37 | December 1905 | 2037 | Selsey Bill (from March 1926) | 32037 | July 1951 |
| 38 | December 1905 | 2038 | Portland Bill (from May 1925) | 32038 | July 1951 |
| 39 | January 1906 | 2039 |
| 32039 | February 1951 |
| 40 | February 1906 | 2040 | St Catherine's Point (from July 1925) | — | January 1944 |
| 41 | February 1906 | 2041 | Peveril Point (from March 1925) | — | March 1944 |
No. 39 was named La France in connection with the visit to Portsmouth of Raymond Poincaré, the President of France; the locomotive was often used for royal trains and other important special trains, and had been selected to haul the train conveying Poincaré. [1] The whole class was named (and no. 39 renamed) during 1925–26 because the Southern Railway's publicity department had decided that express passenger locomotives should be named in order to improve the railway's image. For this class, the names selected were of coastal landmarks in southern England. [2]
The London, Brighton and South Coast Railway was a railway company in the United Kingdom from 1846 to 1922. Its territory formed a rough triangle, with London at its apex, practically the whole coastline of Sussex as its base, and a large part of Surrey. It was bounded on its western side by the London and South Western Railway (L&SWR), which provided an alternative route to Portsmouth. On its eastern side the LB&SCR was bounded by the South Eastern Railway (SER)—later one component of the South Eastern and Chatham Railway (SE&CR)—which provided an alternative route to Bexhill, St Leonards-on-Sea, and Hastings. The LB&SCR had the most direct routes from London to the south coast seaside resorts of Brighton, Eastbourne, Worthing, Littlehampton and Bognor Regis, and to the ports of Newhaven and Shoreham-by-Sea. It served the inland towns and cities of Chichester, Horsham, East Grinstead and Lewes, and jointly served Croydon, Tunbridge Wells, Dorking and Guildford. At the London end was a complicated suburban and outer-suburban network of lines emanating from London Bridge and Victoria, and shared interests in two cross-London lines.
The London, Brighton and South Coast Railway (LB&SCR) A1 Class is a class of British 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton Works. The class has received several nicknames, initially being known as "Rooters" by their south London crews. However, the engines were more famously known as "Terriers" on account of the distinctive 'bark' of the exhaust beat. Later in their careers, some engines were known as "Hayling Billy" on account of their work on the Hayling Island branch line. A pub of this name on the island was briefly home to the engine which is now No. W8 Freshwater.
Brighton railway works was one of the earliest railway-owned locomotive repair works, founded in 1840 by the London and Brighton Railway in Brighton, England, and thus pre-dating the more famous railway works at Crewe, Doncaster and Swindon. The works grew steadily between 1841 and 1900 but efficient operation was always hampered by the restricted site, and there were several plans to close it and move the facility elsewhere. Nevertheless, between 1852 and 1957 more than 1200 steam locomotives as well as prototype diesel electric and electric locomotives were constructed there, before the eventual closure of the facility in 1962.
The London, Brighton and South Coast Railway E4 Class is a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1897 and were essentially a larger version of the E3 Class. The cylinder diameter was reduced from 18 to 17.5 inches by the Southern Railway.
The London, Brighton and South Coast Railway (LB&SCR) E2 Class was a class of 0-6-0T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.
The B4 class were 4-4-0 steam locomotives for express passenger work on the London, Brighton and South Coast Railway. They were designed by R. J. Billinton and were either built at Brighton works 1899–1902 or else by Messrs Sharp, Stewart and Company in 1901. Twelve members of the class were rebuilt from 1922 to 1924 by L. B. Billinton with a larger boiler, cylinders and a superheater. The rebuilt locomotives were classified B4X.
The London, Brighton and South Coast Railway E3 Class were 0-6-2T side tank steam locomotives. One prototype was designed by William Stroudley shortly before his death, but was completed by R. J. Billinton, who later built sixteen further locomotives.
London Brighton and South Coast Railway Class K were powerful 2-6-0 mixed traffic locomotives designed by L. B. Billinton for the London Brighton and South Coast Railway (LB&SCR) in 1913. They appeared shortly before the First World War and the first ten examples of the class did prodigious work during that conflict on munitions, supply and troop trains. Further examples were built after the war, and the class was used as a test bed for various items of specialised equipment. However, after the formation of the Southern Railway in 1923 the remaining three locomotives on order were not completed and the seventeen members of the class led relatively quiet yet reliable lives over their traditional lines. The locomotives proved their usefulness once again during the Second World War, and continued to provide reliable service until the 1960s. The entire class was eventually withdrawn in 1962 for 'bookkeeping' rather than 'operational' reasons.
Douglas Earle Marsh (1862–1933) was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the London, Brighton and South Coast Railway from November 1904 until his early retirement on health grounds in July 1911.
The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.
LB&SCR D3 class was a 0-4-4T tank locomotive designed by R. J. Billinton for the London, Brighton and South Coast Railway (LB&SCR) between 1892 and 1896. They were built for working passenger trains along country and main lines.
The LB&SCR L Class was a class of 4-6-4 steam tank locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway. They were known as the "Brighton Baltics", Baltic being the European name for the 4-6-4 wheel arrangement. Seven examples were built between April 1914 and April 1922 and they were used for express passenger services.
The LB&SCR D1 class were powerful 0-4-2 suburban passenger tank locomotives, designed by William Stroudley of the London Brighton and South Coast Railway in 1873. They were originally known as "D-tanks" but later reclassified as class D1. Members of this very successful class survived in service until 1951.
The LBSCR I2 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway. The I4 class were of the same design but incorporated a superheated boiler.
The LB&SCR I1 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.
The London, Brighton and South Coast Railway (LB&SCR) B2 class was a class of small 4-4-0 steam locomotives intended for express passenger work on the LB&SCR London to Portsmouth line. They were designed by R. J. Billinton and built at Brighton works from 1895 to 1897. They proved to be reliable locomotives but barely adequate for the heaviest trains and acquired the nickname Grasshoppers. As a result the B3 class was developed from the B2, and the B2X class was later rebuilt from these locomotives with larger boilers.
The LB&SCR Belgravia class were 2-4-0 passenger locomotives designed by William Stroudley of the London Brighton and South Coast Railway (LB&SCR) in 1872 for secondary passenger duties.
The London, Brighton and South Coast Railway H2 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed when D. E. Marsh was officially Locomotive Superintendent, and were built at Brighton Works in 1911 and 1912.
The LB&SCR I3 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.
The LB&SCR J1 and J2 classes were 4-6-2 steam tank locomotives designed by D. E. Marsh for express passenger services on the London, Brighton and South Coast Railway.
