The London, Midland and Scottish Railway had the largest stock of steam locomotives of any of the 'Big Four' Grouping, i.e. pre-Nationalisation railway companies in the UK. Despite early troubles arising from factions within the new company, the LMS went on to build some very successful designs; many lasted until the end of steam traction on British Railways in 1968. For an explanation of numbering and classification, see British Rail locomotive and multiple unit numbering and classification.
The British Rail Class 05 is a class of 0-6-0 diesel-mechanical shunters built by Hunslet Engine Company from 1955 to 1961. They were used on the Eastern and Scottish Regions of British Railways. The first two batches were delivered as 11136-11143 and 11161-11176. Subsequent locomotives were delivered, new, as D2574-D2618.
The British Rail Class 08 is a class of diesel-electric shunting locomotives built by British Railways (BR). As the standard BR general-purpose diesel shunter, the class became a familiar sight at major stations and freight yards. Since their introduction in 1952, however, the nature of rail traffic in Britain has changed considerably. Freight trains are now mostly fixed rakes of wagons, and passenger trains are mostly multiple units or have Driving Van Trailers, neither requiring the attention of a shunting locomotive. Consequently, a large proportion of the class has been withdrawn from mainline use and stored, scrapped, exported or sold to industrial or heritage railways.
The British Rail Class 11 was applied to a batch of diesel shunting locomotives built from April 1945 to December 1952, based on a similar earlier batch built by the London, Midland and Scottish Railway (LMS) between 1934 and 1936.
The steam locomotives of British Railways were used by British Railways over the period 1948–1968. The vast majority of these were inherited from its four constituent companies, the "Big Four".
The British Railways Class D3/7 is a class of 0-6-0 diesel electric shunting locomotives built as LMS Nos. 7080–7119. The class were built from May 1939 through to July 1942 by the London, Midland and Scottish Railway at their Derby Works using a diesel electric transmission supplied by English Electric.
The London, Midland and Scottish Railway (LMS) pioneered the use of diesel shunting locomotives in Great Britain. The variety of experimental and production diesel shunters produced by the LMS is summarised below.
The Great Western Railway purchased two diesel shunters, and ordered a further seven immediately prior to Nationalisation, which were delivered to British Rail in 1948–49. The two shunters used by the GWR were numbered 1 and 2, while a series commencing at 501 was planned for the new locomotives ordered in the 1940s. British Rail renumbered both its inherited and new locomotives in a series commencing from 15100.
LMS diesel shunter No. 1831 was an experimental diesel hydraulic shunter built by the London, Midland and Scottish Railway (LMS) in 1931/3, which pioneered diesel shunting in the UK.
LMS diesel shunter 7050 is an experimental 0-4-0 diesel-mechanical shunting locomotive, introduced by the London Midland and Scottish Railway (LMS) in 1934 and which remained in service with that railway for six years. It was later acquired for military use and is now preserved at the National Railway Museum.
The British Rail Class D3/6 were diesel shunters designed in 1934/5 by English Electric for the London, Midland and Scottish Railway. (LMS)
The Northern Counties Committee (NCC) Class X was a solitary diesel-hydraulic shunting (switcher) locomotive built by Harland and Wolff (H&W) for service in the NCC's yards and at Belfast docks. It was one of several pioneering designs of diesel locomotive produced by H&W under their Harlandic trademark during the 1930s and 1940s.
LMS diesel shunter 7051 was built by the Hunslet Engine Company to demonstrate its wares. After public exhibition in February 1932, it was used for trials at a colliery, before being tested by the LMS. After further public exhibition in February 1933, it was at last purchased by the LMS in May 1933. It was loaned to the War Department from August 1940, which numbered it 27. During 1941–1944 it was returned to the LMS, but in August 1944 it returned to the WD, now numbered 70027. After the end of World War II it was returned to the LMS, but was withdrawn in December 1945 and resold back to Hunslet. Hunslet used the locomotive as a works shunter, but it was also available for hire, and spent time at oil refineries in Essex and with British Railways.
LMS diesel shunter 7052 was an experimental 0-6-0 diesel-mechanical shunting locomotive, introduced by the London Midland and Scottish Railway (LMSR) in 1934 and which remained in service with that railway for six years. It was later acquired for military use until 1966.
LMS diesel shunter 7053 carried its original number of 7403 only within the Hunslet Engine Company's works, and was delivered as LMS number 7053. It was of almost exactly the same size and shape as LMS diesel shunter 7052, but had different internal fittings. It was loaned to the War Department between 1939-1942, which numbered it 23. Immediately upon return to the LMS, in December 1942, it was withdrawn from stock and sold back to Hunslet. No further use was found for it and it was eventually dismantled during the mid-1950s.
LMS diesel shunter 7054 was initially allocated the number 7404 but this number was never carried. It was supplied by the Hunslet Engine Company in 1934. Testing started in October 1934 and it was taken into LMS stock in November 1934.
LMS diesel shunter 7058 was based on an earlier Armstrong Whitworth prototype of 1932, which had been tested by the London, Midland and Scottish Railway. It was initially numbered 7408 and then re-numbered 7058.
The War Department ex-LMS Fowler Class 3F consisted of 8 LMS Fowler Class 3F 0-6-0T steam locomotives requisitioned in 1940 from the London Midland and Scottish Railway (LMS).
LMS diesel shunters 7059–7068 were 0-6-0 diesel-electric shunters built by Armstrong Whitworth in 1936. Maker's numbers D54-D63. The diesel engine was an Armstrong-Sulzer 6LTD22 of 350 bhp at 875 rpm. There was a single Crompton Parkinson traction motor with a rating of 231 hp (continuous) or 358 hp. Final drive was by double reduction gears of 11.1:1 ratio and jackshafts. These locomotives were similar in appearance to LMS 7080–7119 although the internal equipment was different. They started work in 1936 and were allocated to Crewe South (7059–7063) and Kingmoor (7064–7068).
