Lambretta Model C

Last updated
Lambretta Model C
Lambretta 125 Innocenti 1951-02ASD.jpg
Manufacturer Lambretta
Production1950–1951
Predecessor Lambretta Model B
Successor Lambretta Model D
Class Scooter
Engine 123 cc, two stroke, single cylinder
Bore / stroke 52 mm × 58 mm
Top speed44 mph (71 km/h)
Power 4.3 hp (3 kW; 4 PS)
Transmission 3-speed, handlebar twist grip
Suspension Spring suspension (front & rear)
Brakes Drum
Tyres 4.00 × 8
DimensionsL: 1730 mm
W: 730 mm
H: 920 mm
Weight
  • Model C 70kg
  • Model LC 80kg
 (dry)
Fuel consumption
  • Model C110 mpgimp (2.6 L/100 km; 92 mpgUS)
  • Model LC141 mpgimp (2.00 L/100 km; 117 mpgUS)

The Lambretta Model C was the third production Scooter made by Innocenti's Lambretta. The Model C was the first Lambretta scooter to be imported the United Kingdom. The C is seen as a more reliable bike than previous models although it remained very similar to its predecessors.

Contents

Design

Starting with the Model C Lambretta frames would be made of tube. The engine was once again a 123cc air-cooled engine but the block was this time was integrated to the frame with the spring suspension. The same carburetor, a Dell'Orto MA16, was used on the Model C as on the previous bikes. A 3 speed gearbox was also used as with the other models but the frame was made of a single piece of tube. The Model C had drum brakes, Front and Rear, and the head light was mounted on the front of the frame below the handlebars and the rear light was smaller and placed above the number plate. The Model C came with many more options than previous versions including rear seat, bolt on leg shields, a horn cover, speedometer, floor mats and a spare wheel. It came in 4 different colours, Beige, Green, Grey and Red. [1] [2]

Sales and production

Lambretta made 87,500 Model C's and 42,500 Model LC's, this is much higher than previous models. [3]

Model LC

The Model LC was a Model C with full leg shields, side panels and rear running boards, the first Lambretta to do so, the 'L' stands for Lusso, meaning luxury in English. The side panel featured an access panel so the rider could turn on the choke without removing the side panel. Due to the side panels direct engine cooling could not work, so the flywheel gained cooling fins. [4]

Related Research Articles

<span class="mw-page-title-main">Vespa</span> Italian scooter

Vespa is an Italian luxury brand of scooters and mopeds manufactured by Piaggio. The name means wasp in Italian. The Vespa has evolved from a single model motor scooter manufactured in 1946 by Piaggio & Co. S.p.A. of Pontedera, Italy to a full line of scooters and one of seven companies today owned by Piaggio.

<span class="mw-page-title-main">Moto Guzzi</span> Italian motorcycle manufacturer

Moto Guzzi is an Italian motorcycle manufacturer and the oldest European manufacturer in continuous motorcycle production.

<span class="mw-page-title-main">Honda CX series</span> Series of motorcycles

The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.

<span class="mw-page-title-main">Trojan (automobile)</span>

Trojan was a British automobile manufacturer producing light cars between 1914 and 1965, and light commercial vehicles for a short time.

<span class="mw-page-title-main">Cutdown</span> Customised scooter

A cutdown is a customised scooter with parts of the bodywork removed or cut away. Cutdowns were popular amongst skinheads and scooterboys during the mod revival of the 1970s and 1980s. While the style-obsessed British mod youth subculture of the 1960s prized the glamorous, metropolitan image of scooters, many skinheads and scooterboys viewed their bikes as simply a form of transportation.

<span class="mw-page-title-main">Suzuki GSX-R750</span> Sports motorcycle

The Suzuki GSX-R750 is a sports motorcycle made by Suzuki since 1985. It was introduced at the Cologne Motorcycle Show in October 1984 as a motorcycle of the GSX-R series.

<span class="mw-page-title-main">Lambretta Special X</span> Type of motorcycle

The Lambretta Special X (SX), is a production scooter made by Innocenti Lambretta from 1966 to 1969 it replaced the Li Special 150 and TV200.

<span class="mw-page-title-main">Ducati L-twin engine</span>

The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 270-degree firing order and is mounted with one cylinder horizontal.

<span class="mw-page-title-main">Honda Big Ruckus</span> Honda motorcycle

The Big RuckusPS250 is a 250cc, CVT transmission-equipped two-seater scooter, manufactured by Honda; marketed in Japan for model years 2004-2007 and in North America for model years 2005-2006 — and noted for its minimal bodywork and expressed light-weight steel tubular frame, akin to the Honda Zoomer.

Motorcycle components and systems for a motorcycle are engineered, manufactured, and assembled in order to produce motorcycle models with the desired performance, aesthetics, and cost. The key components of modern motorcycles are presented below.

<span class="mw-page-title-main">Yamaha RD500LC</span> Type of motorcycle

The Yamaha RD500LC is a high-performance, two-stroke sports motorcycle, also known as the RZ500 in Canada and Australia. A lightened but detuned version known as the RZV500R was developed for the Japanese home market. Strict United States Environmental Protection Agency regulations meant that the RZ500 was not available for sale in that country. Produced for a short period between 1984 and 1986 it has become a sought after collector's machine.

<span class="mw-page-title-main">Suzuki GT550</span> Type of motorcycle

The Suzuki GT550 is a three cylinder, two-stroke, air-cooled 1970s-era motorcycle in Suzuki's "Grand Touring" GT series. Three Grand Touring models including the GT380 and GT750 and were originally offered for sale with the beginning of the 1972 model year (MY) with the 550 called "Indy" for the North American market. In Suzuki's numbering scheme, automobile race tracks identify each of its 3-cylinder GT bikes for the North America market: Sebring for the 380, Indy for the 550 and Le Mans for the 750.

<span class="mw-page-title-main">Scooter (motorcycle)</span> Low-speed motorcycle

A scooter is a motorcycle with an underbone or step-through frame, a seat, and a platform for the rider's feet, emphasizing comfort and fuel economy. Elements of scooter design were present in some of the earliest motorcycles, and motor scooters have been made since at least 1914.

<span class="mw-page-title-main">Lambretta</span> Brand name of Italian (mainly) motor scooters

Lambretta is the brand name of mainly motor scooters, initially manufactured in Milan, Italy, by Innocenti.

Brumana Pugliese S.A. was a Brazilian motorcycle and scooter manufacturer that ceased trading in 1982. Its predecessor companies were Lambretta do Brasil and Pasco Lambretta.

The Lambretta Model A is the first production model of Lambretta scooters. It was Ferdinando Innocenti's idea of a cheap type of transport for Italy in the mid-late 1940s.

<span class="mw-page-title-main">Moto Guzzi Triporteurs</span>

The Moto Guzzi Triporteurs were wheeled transport motorcycles (triporteurs) of the Moto Guzzi brand. In Italy, they are called "motocarri".

<span class="mw-page-title-main">MV Agusta 125 Pullman</span> Type of motorcycle

The MV Agusta 125 Pullman was a motorcycle produced by the Italian manufacturer MV Agusta from 1953 to 1956. The model achieved a good sales success, and had the highest production of any machine from MV Agusta. Many brought the bike as the only means of family transport or as a work vehicle. Despite the questionable aesthetics, the Pullman offered a comfortable ride, derived by the driving position, soft suspension and large section tires. This was particularly appreciated by users, so much so that they were imitated by some competitors. 27,000 machines of this model series were produced. The model was also produced under licence in Spain by Avello, where it was marketed as the MV Avello 125 Pullman Turismo.

<span class="mw-page-title-main">Lambretta V-Special</span> Type of motorcycle

The Lambretta V-Special is a scooter produced by Innocenti S.A. under the brand name Lambretta. The bike has been introduced in 3 models the V50 Special, V125 Special and the V200 Special. The V-Special began production in 2017 and is based on the SYM Fiddle.

<span class="mw-page-title-main">Lambretta Model D</span> Scooter built by Lambretta

The Lambretta Model D was a scooter produced by Lambretta as a direct replacement for the Model C. The Model D was the first Innocenti scooter to be manufactured outside of Italy as the licence was sold in Europe, Asia and South America.

References

  1. "Lambretta Club of Great Britain".
  2. "Lambretta Official Website".
  3. "Cambridge Lambretta".
  4. "Lambretta Official Website".