Lewisite 2

Last updated
Lewisite 2 [1]
Lewisite2.png
Names
Preferred IUPAC name
Bis[(E)-2-chloroethen-1-yl]arsinous chloride
Other names
Dichlorovinylarsine chloride
Chlorobis((E)-2-chlorovinyl)arsine
Bis[(E)-2-chlorovinyl]chloroarsine
(E,E)-Lewisite 2
Identifiers
3D model (JSmol)
ChemSpider
PubChem CID
UNII
  • InChI=1S/C4H4AsCl3/c6-3-1-5(8)2-4-7/h1-4H/b3-1+,4-2+
    Key: YRFJGLQNTWLXKO-ZPUQHVIOSA-N
  • C(=C[As](C=CCl)Cl)Cl
Properties
C4H4AsCl3
Molar mass 233.35 g mol−1
Hazards
NFPA 704 (fire diamond)
4
1
1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Lewisite 2(L-2) is an organoarsenic chemical weapon with the formula AsCl(CH=CHCl)2. It is similar to lewisite 1 and lewisite 3 and was first synthesized in 1904 by Julius Arthur Nieuwland. [2] It is usually found as a mixture of 2-chlorovinylarsonous dichloride (lewisite 1) as well as bis(2-chloroethenyl) arsinous chloride (lewisite 2) and tris(2-chlorovinyl)arsine (lewisite 3). [2] Pure lewisite 1 is an oily, colorless liquid, however, the impure mixture can appear amber to black with an odor distinct to geraniums. [3] [4]

Contents

Synthesis

Lewisite 2 is made as a byproduct along with lewisite 3 in the reaction that makes lewisite 1. [5] Acetylene reacts with AsCl3 in hydrochloric acid solution, with mercuric chloride as a catalyst, to give lewisite in 80 to 85% yield. [5]

AsCl3 + C2H2 → (ClCH=CH)AsCl2

Lewisite 2 is formed when there are two additions of acetylene to the arsenic center instead of one like the reaction seen above where only lewisite one is shown.

Exposure

Adverse health effects caused by lewisite can vary and are dependent on; the amount people are exposed to and, the amount of time someone is exposed to it. Lewisite immediately damages the skin, eyes, and respiratory tract and is a strong irritant and blistering agent. Due to its arsenic center, lewisite may also cause problems similar to arsenic poisonings like stomach ailments and low blood pressure.

Inhalation

Inhalation, the most common route of exposure, causes a burning pain and irritation throughout the respiratory tract, nosebleed (epistaxis), laryngitis, sneezing, coughing, vomiting, difficult breathing (dyspnea). From one acute exposure, someone who has inhaled lewisite can develop chronic respiratory disease. [4] In severe cases of exposure, can cause fatal pulmonary edema, pneumonitis, or respiratory failure.

Ingestion

Ingestion results in severe pain, nausea, vomiting, and tissue damage. [4] Those exposed to lewisite can develop refractory hypotension (low blood pressure) known as Lewisite shock, as well as some features of arsenic toxicity. [6] Lewisite causes physical damage to capillaries, which then become leaky, meaning that there is not enough blood volume to maintain blood pressure, a condition called hypovolemia. When the blood pressure is low, the kidneys may not receive enough oxygen and can be damaged. [4]

Eye exposure

The results of eye exposure can range from stinging, burning pain and strong irritation to blistering and scarring of the cornea, along with blepharospasm, lacrimation, and edema of the eyelids and periorbital area. Eye exposure to lewisite can cause permanent visual impairment or blindness. [4] The eyes can swell shut, which can keep the eyes safe from further exposure. The most severe consequences of eye exposure to lewisite are globe perforation and blindness. [4] Generalised symptoms also include restlessness, weakness, hypothermia and low blood pressure.

Chronic exposure

Chronic exposure to lewisite can cause arsenic poisoning and development of a lewisite allergy. It can also cause various long-term illnesses or permanent damage to organs, depending on where the exposure has occurred, including conjunctivitis, aversion to light (photophobia), visual impairment, double vision (diplopia), tearing (lacrimation), dry mucous membranes, garlic breath, burning pain in the nose and mouth, toxic encephalopathy, peripheral neuropathy, seizures, nausea, vomiting, chronic obstructive pulmonary disease (COPD), bronchitis, dermatitis, skin ulcers, basal cell carcinoma, and squamous cell carcinoma. [4]

Treatment

Basic first aid for lewisite exposure is decontamination and irrigation of any areas that have been exposed, and when necessary airway management, assisted ventilation, and monitoring of vital signs. [4] Dimercaprol, also called British anti-lewisite, is the antidote for lewisite. It can be injected to prevent systemic toxicity, but will not prevent injury to the skin, eyes, or mucous membranes. Chemically, dimercaprol is a chelating agent that binds to the arsenic in lewisite. [7] It is contraindicated in those with peanut allergies. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Mustard gas</span> Chemical compound once used in warfare

Mustard gas or sulfur mustard is a chemical compound belonging to a family of cytotoxic and blister agents known as mustard agents. The name mustard gas is widely used, but it is technically incorrect: the substance, when dispersed, is often not actually a gas, but is instead in the form of a fine mist of liquid droplets.

<span class="mw-page-title-main">Lewisite</span> Chemical compound

Lewisite (L) (A-243) is an organoarsenic compound. It was once manufactured in the U.S., Japan, Germany and the Soviet Union for use as a chemical weapon, acting as a vesicant and lung irritant. Although the substance is colorless and odorless in its pure form, impure samples of lewisite are a yellow, brown, violet-black, green, or amber oily liquid with a distinctive odor that has been described as similar to geraniums.

<span class="mw-page-title-main">Blister agent</span> Chemicals that result in blistering and skin irritation and damaging

A blister agent, is a chemical compound that causes severe skin, eye and mucosal pain and irritation. They are named for their ability to cause severe chemical burns, resulting in painful water blisters on the bodies of those affected. Although the term is often used in connection with large-scale burns caused by chemical spills or chemical warfare agents, some naturally occurring substances such as cantharidin are also blister-producing agents (vesicants). Furanocoumarin, another naturally occurring substance, causes vesicant-like effects indirectly, for example, by increasing skin photosensitivity greatly. Vesicants have medical uses including wart removal but can be dangerous if even small amounts are ingested.

<span class="mw-page-title-main">Chemical hazard</span> Non-biological substance that has the potential to cause harm to life or health

A chemical hazard is a (non-biological) substance that has the potential to cause harm to life or health. Chemicals are widely used in the home and in many other places. Exposure to chemicals can cause acute or long-term detrimental health effects. There are many types of hazardous chemicals, including neurotoxins, immune agents, dermatologic agents, carcinogens, reproductive toxins, systemic toxins, asthmagens, pneumoconiotic agents, and sensitizers. In the workplace, exposure to chemical hazards is a type of occupational hazard. The use of protective personal equipment (PPE) may substantially reduce the risk of damage from contact with hazardous materials.

A blood agent is a toxic chemical agent that affects the body by being absorbed into the blood. Blood agents are fast-acting, potentially lethal poisons that typically manifest at room temperature as volatile colorless gases with a faint odor. They are either cyanide- or arsenic-based.

Cadmium is a naturally occurring toxic metal with common exposure in industrial workplaces, plant soils, and from smoking. Due to its low permissible exposure in humans, overexposure may occur even in situations where trace quantities of cadmium are found. Cadmium is used extensively in electroplating, although the nature of the operation does not generally lead to overexposure. Cadmium is also found in some industrial paints and may represent a hazard when sprayed. Operations involving removal of cadmium paints by scraping or blasting may pose a significant hazard. The primary use of cadmium is in the manufacturing of NiCd rechargeable batteries. The primary source for cadmium is as a byproduct of refining zinc metal. Exposures to cadmium are addressed in specific standards for the general industry, shipyard employment, the construction industry, and the agricultural industry.

<span class="mw-page-title-main">Chlormethine</span> Chemical compound

Chlormethine, also known as mechlorethamine, mustine, HN2, and embikhin (эмбихин), is a nitrogen mustard sold under the brand name Mustargen among others. It is the prototype of alkylating agents, a group of anticancer chemotherapeutic drugs. It works by binding to DNA, crosslinking two strands and preventing cell duplication. It binds to the N7 nitrogen on the DNA base guanine. As the chemical is a blister agent, its use is strongly restricted within the Chemical Weapons Convention where it is classified as a Schedule 1 substance.

<span class="mw-page-title-main">Abrin</span> Chemical compound

Abrin is an extremely toxic toxalbumin found in the seeds of the rosary pea, Abrus precatorius. It has a median lethal dose of 0.7 micrograms per kilogram of body mass when given to mice intravenously. The median toxic dose for humans ranges from 10 to 1000 micrograms per kilogram when ingested and is 3.3 micrograms per kilogram when inhaled.

<span class="mw-page-title-main">Adamsite</span> Chemical compound

Adamsite or DM is an organic compound; technically, an arsenical diphenylaminechlorarsine, that can be used as a riot control agent. DM belongs to the group of chemical warfare agents known as vomiting agents or sneeze gases. First synthesized in Germany by Heinrich Otto Wieland in 1915, it was independently developed by the US chemist Roger Adams at the University of Illinois in 1918.

<span class="mw-page-title-main">HN1 (nitrogen mustard)</span> Chemical compound

Bis(2-chloroethyl)ethylamine is the organic compound with the formula C2H5N(CH2CH2Cl)2. Often abbreviated HN1, it is a powerful vesicant and a nitrogen mustard gas used for chemical warfare. HN1 was developed in the 1920s and 1930s to remove warts and later as a military agent. Because of the latter use, it is a Schedule 1 chemical within the Chemical Weapons Convention and therefore use and production is strongly restricted. It has never been used in warfare.

Potassium nitrate is an oxidizer so storing it near fire hazards or reducing agents should be avoided to minimise risk in case of a fire.

Arsenicals are chemical compounds that contain arsenic. In a military context, the term arsenical refer to toxic arsenic compounds that are used as chemical warfare agents. This include blister agents, blood agents and vomiting agents.

<span class="mw-page-title-main">Malaoxon</span> Chemical compound

Malaoxon (Liromat, Malation oxon, Malthon oxon) is a chemical compound with the formula C10H19O7PS. More specifically, it is a phosphorothioate. It is a breakdown product of, and more toxic than, malathion.

<span class="mw-page-title-main">Methyldichloroarsine</span> Chemical compound

Methyldichloroarsine, sometimes abbreviated "MD" and also known as methyl Dick, is an organoarsenic compound with the formula CH3AsCl2. This colourless volatile liquid is a highly toxic vesicant that has been used in chemical warfare.

<span class="mw-page-title-main">Phenyldichloroarsine</span> Chemical compound

Phenyldichloroarsine, also known by its wartime name phenyl Dick and its NATO abbreviation PD, is an organic arsenical vesicant and vomiting agent developed by Germany and France for use as a chemical warfare agent during World War I. The agent is known by multiple synonyms and is technically classified as a vesicant, or blister agent.

Acute inhalation injury may result from frequent and widespread use of household cleaning agents and industrial gases. The airways and lungs receive continuous first-pass exposure to non-toxic and irritant or toxic gases via inhalation. Irritant gases are those that, on inhalation, dissolve in the water of the respiratory tract mucosa and provoke an inflammatory response, usually from the release of acidic or alkaline radicals. Smoke, chlorine, phosgene, sulfur dioxide, hydrogen chloride, hydrogen sulfide, nitrogen dioxide, ozone, and ammonia are common irritants.

Chlorine gas poisoning is an illness resulting from the effects of exposure to chlorine beyond the threshold limit value.

<span class="mw-page-title-main">Lewisite 3</span> Chemical compound

Lewisite 3(L-3) is an organoarsenic chemical weapon like lewisite 1 and lewisite 2 first synthesized in 1904 by Julius Arthur Nieuwland. It is usually found as a mixture of 2-chlorovinylarsonous dichloride as well as bis(2-chloroethenyl) arsinous chloride and tris(2-chlorovinyl)arsine. Pure lewisite 1 is an oily, colorless liquid, however, the impure mixture can appear amber to black with an odor distinct to geraniums.

References

  1. National Center for Biotechnology Information. PubChem Database. Lewisite 2, CID=5368106, https://pubchem.ncbi.nlm.nih.gov/compound/Lewisite-2 (accessed on Apr. 8, 2020)
  2. 1 2 McNutt, Patrick M., and Tracey L. Hamilton. "Ocular toxicity of chemical warfare agents." Handbook of Toxicology of Chemical Warfare Agents. Academic Press, 2015. 535-555.
  3. "CDC - Facts about Lewisite". www.cdc.gov. Retrieved 2020-04-15.
  4. 1 2 3 4 5 6 7 8 9 "CDC - The Emergency Response Safety and Health Database: Blister Agent: LEWISITE (L) - NIOSH". www.cdc.gov. Retrieved 2016-01-14.
  5. 1 2 Chemistry of Sulfur Mustard and Lewisite https://www.ncbi.nlm.nih.gov/books/NBK236079/
  6. Chauhan, S.; Chauhan, S.; D’Cruz, R.; Faruqi, S.; Singh, K. K.; Varma, S.; Singh, M.; Karthik, V. Chemical warfare agents. Environ. Toxicol. Pharmacol. 2008, 26, 113-122
  7. Vilensky, Joel A., and Kent Redman. "British anti-Lewisite (dimercaprol): an amazing history." Annals of emergency medicine 41.3 (2003): 378-383.