Mathematical Models (Cundy and Rollett)

Last updated

Mathematical Models is a book on the construction of physical models of mathematical objects for educational purposes. It was written by Martyn Cundy and A. P. Rollett, and published by the Clarendon Press in 1951, [1] [2] [3] [4] [5] [6] with a second edition in 1961. [2] [7] Tarquin Publications published a third edition in 1981. [8]

Contents

The vertex configuration of a uniform polyhedron, a generalization of the Schläfli symbol that describes the pattern of polygons surrounding each vertex, was devised in this book as a way to name the Archimedean solids, and has sometimes been called the Cundy–Rollett symbol as a nod to this origin. [9]

Topics

The first edition of the book had five chapters, including its introduction which discusses model-making in general and the different media and tools with which one can construct models. [5] The media used for the constructions described in the book include "paper, cardboard, plywood, plastics, wire, string, and sheet metal". [1]

The second chapter concerns plane geometry, and includes material on the golden ratio, [5] the Pythagorean theorem, [6] dissection problems, the mathematics of paper folding, tessellations, and plane curves, which are constructed by stitching, by graphical methods, and by mechanical devices. [1]

The third chapter, and the largest part of the book, concerns polyhedron models, [1] made from cardboard or plexiglass. [6] It includes information about the Platonic solids, Archimedean solids, their stellations and duals, uniform polyhedron compounds, and deltahedra. [1]

The fourth chapter is on additional topics in solid geometry [5] and curved surfaces, particularly quadrics [1] but also including topological manifolds such as the torus, Möbius strip and Klein bottle, and physical models helping to visualize the map coloring problem on these surfaces. [1] [3] Also included are sphere packings. [4] The models in this chapter are constructed as the boundaries of solid objects, via two-dimensional paper cross-sections, and by string figures. [1]

The fifth chapter, and the final one of the first edition, includes mechanical apparatus including harmonographs and mechanical linkages, [1] the bean machine and its demonstration of the central limit theorem, and analogue computation using hydrostatics. [3] The second edition expands this chapter, and adds another chapter on computational devices such as the differential analyser of Vannevar Bush. [7]

Much of the material on polytopes was based on the book Regular Polytopes by H. S. M. Coxeter, and some of the other material has been drawn from resources previously published in 1945 by the National Council of Teachers of Mathematics. [1]

Audience and reception

At the time they wrote the book, Cundy and Rollett were sixth form teachers in the UK, [1] [4] and they intended the book to be used by mathematics students and teachers for educational activities at that level. [1] [6] However, it may also be enjoyed by a general audience of mathematics enthusiasts. [3]

Reviewer Michael Goldberg notes some minor errors in the book's historical credits and its notation, and writes that for American audiences some of the British terminology may be unfamiliar, but concludes that it could still be valuable for students and teachers. Stanley Ogilvy complains about the inconsistent level of rigor of the mathematical descriptions, with some proofs given and others omitted, for no clear reason, but calls this issue minor and in general calls the book's presentation excellent. Dirk ter Haar is more enthusiastic, recommending it to anyone interested in mathematics, and suggesting that it should be required for mathematics classrooms. [3] Similarly, B. J. F. Dorrington recommends it to all mathematical libraries, [5] and The Basic Library List Committee of the Mathematical Association of America has given it their strong recommendation for inclusion in undergraduate mathematics libraries. [8] By the time of its second edition, H. S. M. Coxeter states that Mathematical Models had become "well known". [7]

Related Research Articles

<span class="mw-page-title-main">Icosidodecahedron</span> Archimedean solid with 32 faces

In geometry, an icosidodecahedron is a polyhedron with twenty (icosi) triangular faces and twelve (dodeca) pentagonal faces. An icosidodecahedron has 30 identical vertices, with two triangles and two pentagons meeting at each, and 60 identical edges, each separating a triangle from a pentagon. As such it is one of the Archimedean solids and more particularly, a quasiregular polyhedron.

<span class="mw-page-title-main">Kepler–Poinsot polyhedron</span> Any of 4 regular star polyhedra

In geometry, a Kepler–Poinsot polyhedron is any of four regular star polyhedra.

<span class="mw-page-title-main">Polyhedron</span> 3D shape with flat faces, straight edges and sharp corners

In geometry, a polyhedron is a three-dimensional shape with flat polygonal faces, straight edges and sharp corners or vertices.

In geometry, a Platonic solid is a convex, regular polyhedron in three-dimensional Euclidean space. Being a regular polyhedron means that the faces are congruent regular polygons, and the same number of faces meet at each vertex. There are only five such polyhedra:

<span class="mw-page-title-main">Truncated icosidodecahedron</span> Archimedean solid

In geometry, a truncated icosidodecahedron, rhombitruncated icosidodecahedron, great rhombicosidodecahedron, omnitruncated dodecahedron or omnitruncated icosahedron is an Archimedean solid, one of thirteen convex, isogonal, non-prismatic solids constructed by two or more types of regular polygon faces.

A regular polyhedron is a polyhedron whose symmetry group acts transitively on its flags. A regular polyhedron is highly symmetrical, being all of edge-transitive, vertex-transitive and face-transitive. In classical contexts, many different equivalent definitions are used; a common one is that the faces are congruent regular polygons which are assembled in the same way around each vertex.

<span class="mw-page-title-main">Inscribed sphere</span> Sphere tangent to every face of a polyhedron

In geometry, the inscribed sphere or insphere of a convex polyhedron is a sphere that is contained within the polyhedron and tangent to each of the polyhedron's faces. It is the largest sphere that is contained wholly within the polyhedron, and is dual to the dual polyhedron's circumsphere.

<span class="mw-page-title-main">Vertex figure</span> Shape made by slicing off a corner of a polytope

In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off.

<span class="mw-page-title-main">Euclidean tilings by convex regular polygons</span> Subdivision of the plane into polygons that are all regular

Euclidean plane tilings by convex regular polygons have been widely used since antiquity. The first systematic mathematical treatment was that of Kepler in his Harmonices Mundi.

In geometry, the term semiregular polyhedron is used variously by different authors.

<span class="mw-page-title-main">Uniform polyhedron</span> Isogonal polyhedron with regular faces

In geometry, a uniform polyhedron has regular polygons as faces and is vertex-transitive. It follows that all vertices are congruent.

<span class="mw-page-title-main">Wythoff construction</span> In geometry, method for constructing a uniform polyhedron or plane tiling

In geometry, a Wythoff construction, named after mathematician Willem Abraham Wythoff, is a method for constructing a uniform polyhedron or plane tiling. It is often referred to as Wythoff's kaleidoscopic construction.

<span class="mw-page-title-main">Vertex configuration</span> Notation for a polyhedrons vertex figure

In geometry, a vertex configuration is a shorthand notation for representing the vertex figure of a polyhedron or tiling as the sequence of faces around a vertex. For uniform polyhedra there is only one vertex type and therefore the vertex configuration fully defines the polyhedron.

<span class="mw-page-title-main">Midsphere</span> Sphere tangent to every edge of a polyhedron

In geometry, the midsphere or intersphere of a convex polyhedron is a sphere which is tangent to every edge of the polyhedron. Not every polyhedron has a midsphere, but the uniform polyhedra, including the regular, quasiregular and semiregular polyhedra and their duals all have midspheres. The radius of the midsphere is called the midradius. A polyhedron that has a midsphere is said to be midscribed about this sphere.

<span class="mw-page-title-main">Compound of great icosahedron and great stellated dodecahedron</span>

There are two different compounds of great icosahedron and great stellated dodecahedron: one is a dual compound and a stellation of the great icosidodecahedron, the other is a stellation of the icosidodecahedron.

<i>Regular Polytopes</i> (book) Geometry book

Regular Polytopes is a geometry book on regular polytopes written by Harold Scott MacDonald Coxeter. It was originally published by Methuen in 1947 and by Pitman Publishing in 1948, with a second edition published by Macmillan in 1963 and a third edition by Dover Publications in 1973. The Basic Library List Committee of the Mathematical Association of America has recommended that it be included in undergraduate mathematics libraries.

A dual uniform polyhedron is the dual of a uniform polyhedron. Where a uniform polyhedron is vertex-transitive, a dual uniform polyhedron is face-transitive.

Adventures Among the Toroids: A study of orientable polyhedra with regular faces is a book on toroidal polyhedra that have regular polygons as their faces. It was written, hand-lettered, and illustrated by mathematician Bonnie Stewart, and self-published under the imprint "Number One Tall Search Book" in 1970. Stewart put out a second edition, again hand-lettered and self-published, in 1980. Although out of print, the Basic Library List Committee of the Mathematical Association of America has recommended its inclusion in undergraduate mathematics libraries.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Goldberg, M., "Review of 1st ed.", Mathematical Reviews , MR   0049560
  2. 1 2 Müller, H. R., "Review of 1st ed.", zbMATH (in German), Zbl   0047.38807 ; 2nd ed., Zbl   0095.38001
  3. 1 2 3 4 5 ter Haar, D. (March 1953), "Briefly reviewed (review of 1st ed.)", The Scientific Monthly , 76 (3): 188–189, JSTOR   20668
  4. 1 2 3 Stone, Abraham (April 1953), "Review of 1st ed.", Scientific American , 188 (4): 110, JSTOR   24944205
  5. 1 2 3 4 5 Dorrington, B. J. F. (September 1953), "Review of 1st ed.", The Mathematical Gazette , 37 (321): 223, doi:10.2307/3608314, JSTOR   3608314
  6. 1 2 3 4 Ogilvy, C. Stanley (November 1959), "Review of 1st ed.", The Mathematics Teacher , 52 (7): 577–578, JSTOR   27956015
  7. 1 2 3 Coxeter, H. S. M. (December 1962), "Review of 2nd ed.", The Mathematical Gazette , 46 (358): 331, doi:10.2307/3611791, JSTOR   3611791
  8. 1 2 "Mathematical Models (3rd ed.; listing with no review)", MAA Reviews, Mathematical Association of America, retrieved 2020-09-09
  9. ↑ Popko, Edward S. (2012), "6.4.1 Cundy–Rollett Symbols", Divided Spheres: Geodesics and the Orderly Subdivision of the Sphere, Boca Raton, Florida: CRC Press, doi:10.1201/b12253-22, ISBN   978-1-4665-0429-5, MR   2952780
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.