Mercedes-Benz M112 engine | |
---|---|
Overview | |
Manufacturer | Mercedes-Benz |
Production | 1996–2015 |
Layout | |
Configuration | 90° V6 |
Displacement | 2.4 L (2,398 cc) 2.6 L (2,597 cc) 2.8 L (2,799 cc) 3.2 L (3,199 cc) 3.7 L (3,724 cc) |
Cylinder bore | 83.2 mm (3.28 in) 89.9 mm (3.54 in) 97 mm (3.82 in) |
Piston stroke | 68.2 mm (2.69 in) 73.5 mm (2.89 in) 84 mm (3.31 in) |
Cylinder block material | Aluminum |
Cylinder head material | Aluminum |
Valvetrain | SOHC 3 valves x cyl. |
RPM range | |
Max. engine speed | 6,000-6,400 rpm |
Combustion | |
Supercharger | IHI Twin-screw type (in some versions) |
Fuel system | Sequential fuel injection |
Fuel type | Gasoline |
Cooling system | Water cooled |
Output | |
Power output | 125–260 kW (170–354 PS; 168–349 bhp) |
Torque output | 225–450 N⋅m (166–332 lb⋅ft) |
Chronology | |
Predecessor | Mercedes-Benz M104 (inline-6) |
Successor | Mercedes-Benz M272 |
The Mercedes-Benz M112 engine is a gasoline-fueled, 4-stroke, spark-ignition, internal-combustion automobile piston V6 engine family used in the 2000s. Introduced in 1996, it was the first gasoline V6 engine ever built by Mercedes. A short time later the related M113 V8 was introduced.
All are built in Bad Cannstatt, Germany, except the supercharged C 32 AMG and SLK 32 AMG, assembled in Affalterbach, Germany.
All M112 engines have silicon/aluminum (Alusil) engine blocks with a 90° vee angle. The aluminum SOHC cylinder heads have 3 valves per cylinder. All use sequential fuel injection with two spark plugs per cylinder. All have forged steel connecting rods, a one-piece cast camshaft, iron-coated aluminum pistons and a magnesium intake manifold. To deal with the vibration problems of a 90 degree V6, a balancer shaft was installed in the engine block between the cylinder banks. This essentially eliminated first and second order vibration problems (see engine balance). A dual-length Variable Length Intake Manifold is fitted to optimise engine flexibility.
The E24 is a 2.4 L (2,398 cc) version. Bore and stroke is 83.2 mm × 73.5 mm (3.28 in × 2.89 in). The engine produces 168 bhp (125 kW; 170 PS) at 5900 rpm and 225 N⋅m (166 lb⋅ft) of torque between 3000 and 5500 rpm. The compression ratio is 10.0:1. [1] [2]
Applications:
The E26 is a 2.6 L (2,597 cc) version. Bore and stroke is 89.9 mm × 68.2 mm (3.54 in × 2.69 in). Output is 125 kW (170 PS; 168 bhp) ECE at 5,500 rpm 240 N⋅m (177 lb⋅ft) of torque at 4,500 rpm in all applications except in the 2003-2005 W211 E-Class where power rose to 130 kW (177 PS; 174 bhp). [3] [4] [5] The compression ratio is raised to 10.5:1. [1] [6]
Applications:
M112.912:
M112.914:
M112.916:
M112.917:
M112.950:
The E28 is a 2.8 L (2,799 cc) version. Bore and stroke is 89.9 mm × 73.5 mm (3.54 in × 2.89 in). It produces 201 bhp (150 kW; 204 PS) (W220 S280, R129 SL280 and W210 E280) or 194 bhp (145 kW; 197 PS) (W202 C280) at 5,700 rpm and 270 N⋅m (199 lb⋅ft) of torque between 3,000 and 5,000 rpm. The compression ratio is 10.0:1. [1] [7]
Applications:
The E32 is a 3.2 L (3,199 cc) version. Bore remains at 89.9 mm (3.54 in) but the engine is stroked to 84 mm (3.31 in). Output is 215-224 bhp ECE at 5,700 rpm (depending on model) with 315 N⋅m (232 lb⋅ft) of torque at 3,000-4,800 rpm. The compression ratio is 10.0:1. It has fracture-split forged steel connecting rods. [1] [8]
Applications:
The E32 Kompressor is a special version of the 3.2 L (3,199 cc), fitted with a helical Twin-screw type supercharger. The supercharger was developed in conjunction with IHI and features Teflon-coated rotors producing overall boost of 14.5 psi (1.00 bar) with the factory 74mm clutch-activated pulley. A water-to-air intercooler made by Garrett is fitted beneath the supercharger inside the V, with a 0.8L Heat-Exchanger mounted under the bumper run by an electric water pump. Output is 260 kW (354 PS; 349 bhp) ECE at 6,100 rpm with 450 N⋅m (332 lb⋅ft) of torque at 3,000-4,600 rpm. The compression ratio is 9.0:1. [1] [9]
Applications:
The E37 is a 3.7 L (3,724 cc) version. It retains the stroke of the E32 but is bored to 97 mm (3.82 in). Output is 173 to 180 kW (235 to 245 PS; 232 to 241 bhp) ECE at 5,750 rpm with 344 N⋅m (254 lb⋅ft) of torque at 3,000-4,500 rpm. The compression ratio is 10.0:1. [1] [10]
Applications:
Mercedes-AMG GmbH, commonly known as AMG, is the high-performance subsidiary of Mercedes-Benz AG. AMG independently hires engineers and contracts with manufacturers to customize Mercedes-Benz AMG vehicles. The company has its headquarters in Affalterbach, Baden-Württemberg, Germany.
Brabus GmbH is a German high-performance automotive aftermarket tuning company founded in 1977 in Bottrop. Brabus specialises mainly in Mercedes-Benz, Maybach and Smart vehicles. They have also modified other vehicles including Porsche.
The Mercedes-Benz M271 engine is a straight-4 automobile piston engine family used in the 2000s (decade).
The Mercedes-Benz M113 engine is a gasoline-fueled, spark-ignition internal-combustion V8 automobile engine family used in the 2000s. It is based on the similar M112 V6 introduced in 1997, then later phased out in 2007 for the M156 AMG engine and the M273 engine.
The Mercedes-Benz W210 is the internal designation for a range of executive cars manufactured by Mercedes-Benz and marketed under the E-Class model name in both sedan/saloon (1995–2002) and station wagon/estate (1996–2003) configurations. W210 development started in 1988, three years after the W124's introduction.
The Mercedes-Benz W211 is the third generation Mercedes-Benz E-Class made from 2001 to 2009 in sedan/saloon and station wagon/estate configurations – replacing the W210 E-Class models and superseded by the Mercedes-Benz W212 in 2009.
The C209/A209 Mercedes-Benz CLK-Class is the second generation of the Mercedes-Benz CLK-Class range of grand tourers, produced between 2001 and 2009. There were two body styles available: a 2-door coupé (C209) and a 2-door convertible (A209). The latter being assembled at the Karmann plant in Osnabrück. It was also the last complete car made by Karmann before closing the facility.
The Mercedes-Benz M119 is a V8 automobile petrol engine produced from 1989 through 1999. It was available in 4.2 L; 5.0 L; and 6.0 L displacements. It was a double overhead cam design with 4 valves per cylinder and variable valve timing on the intake side. It was replaced by the 3-valve M113 starting in 1997.
The C208/A208 Mercedes-Benz CLK-Class introduced in 1997 is a grand tourer produced by German automaker Mercedes-Benz. It was based on the W202 Mercedes-Benz C-Class launched three years earlier. The C208 coupé is the first generation of the Mercedes-Benz CLK-Class and was subsequently replaced by the C209 CLK-Class in 2002, although the convertible remained in production till March 2003 when replaced by the A209 CLK-Class. Production 233,367 units for the C208 when production ceased in May 2002 and 115,161 for the C208 which was assembled at the Karmann plant in Osnabrück.
The Mercedes-Benz M137 engine is a naturally aspirated, SOHC 60° V12 engine, with three valves per cylinder, 2 intake and 1 exhaust. It was built to replace the larger and heavier, yet more powerful, DOHC, four valves per cylinder, naturally aspirated, 6.0 L M120 V12 unit. The M137 was used briefly between 1998 and 2002 for the W220 S-Class and C215 CL-Class. The architecture is similar to M112 and M113 engines, and is designed to match the overall dimensions of a V8 unit with undersquare internal measurements. The crankcase was cast in a lightweight alloy with "Silitec" (silicon/aluminium) cylinder liners to save weight. The M137 is 80 kg lighter than its predecessor and features cylinder deactivation technology. Both displacement variants have 10:1 compression ratio.
The Mercedes-Benz M272 engine is an automobile piston V6 engine family used in the 2000s (decade). Introduced in 2004, it is based on the M112 V6 introduced in 1998.
The Mercedes-Benz M273 engine is a V8 automobile piston engine family used in the 2000s (decade). It was based on the similar M272 V6 introduced in 2004.
5G-Tronic is Mercedes-Benz's trademark name for its 5-speed automatic transmission, starting off with the W5A 580 and W5A 330 as core models.
The M111 engine family is a straight-4 automobile engine from Mercedes-Benz, produced from 1992 to 2003. Debuted in the 1992 Mercedes-Benz E-Class (W124), this engine family is relatively oversquare and uses 4 valves per cylinder. All engines in the family use a cast iron engine block and aluminum alloy cylinder head.
The Mercedes-Benz OM612 engine is a straight-5 diesel engine produced by Daimler AG ,today Mercedes-Benz.
The Mercedes-Benz M278 is a family of direct injected, Bi-turbocharged, V8 gasoline automotive piston engines.
The Mercedes-Benz M276 engine is a direct injected, gasoline automotive piston V6 engine.
Kompressor is a marketing name for forced induction (supercharged) Mercedes-Benz engines. The term is not widely used by other motor manufacturers.
Mercedes-Benz W202 is the internal designation for a compact sedan/saloon manufactured and marketed by Mercedes-Benz between 1992 and 2001, as the first generation of the C-Class, now in its fifth generation. Replacing the 190 series/W201 in June 1993, the C-Class sedan was Mercedes' entry-level model until 1997, when the company launched the A-Class. Production reached 1,847,382 over model years 1994–2000.
The Mercedes-Benz C-Class (W203) is the internal designation for a range of compact executive cars manufactured and marketed by DaimlerChrysler from 1999 to 2010, as the second generation of the C-Class — in sedan/saloon, three-door hatchback coupé and station wagon/estate body styles.