Mercury regulation in the United States

Last updated

Fish advisory chart issued by U.S. Environmental Protection Agency and Food and Drug Administration. The types of fish to eat are categorized based on the mercury levels found in fish and the risk to human health. Advice About Eating Fish - EPA & FDA - 2017.png
Fish advisory chart issued by U.S. Environmental Protection Agency and Food and Drug Administration. The types of fish to eat are categorized based on the mercury levels found in fish and the risk to human health.

Mercury regulation in the United States limit the maximum concentrations of mercury (Hg) that is permitted in air, water, soil, food and drugs. The regulations are promulgated by agencies such as the Environmental Protection Agency (EPA) and Food and Drug Administration (FDA), as well as a variety of state and local authorities. EPA published the Mercury and Air Toxics Standards (MATS) regulation in 2012; the first federal standards requiring power plants to limit emissions of mercury and other toxic gases. [1] [2]

Contents

Background

Forms of mercury

Mercury occurs naturally in the environment and exists in many forms. In pure form, it is known as "elemental" or "metallic" mercury. Elemental mercury is a shiny, silver-white metal that is liquid at room temperature. It is not found in this form in nature, but in compounds and inorganic salts. If not sealed off, mercury slowly evaporates into the air, forming a vapor. The quantity of vapor formed increases as temperatures rise. Elemental mercury is traditionally used in thermometers and some electrical switches.

Inorganic mercury compounds or mercury salts, more commonly found in nature, include mercuric sulphide (HgS), mercuric oxide (HgO) and mercuric chloride (HgCl2). Most of these are white powders or crystals, except for mercuric sulphide which is red and turns black after exposure to light.

Organic mercury is formed when mercury combines with carbon and other elements. Examples of organic mercury compounds are dimethylmercury, phenylmercuric acetate, and methylmercuric chloride. The form most commonly found in the environment is methylmercury.

How mercury exists in the environment

Elemental mercury in the atmosphere can undergo transformation into inorganic mercury forms, providing a significant pathway for deposition of emitted elemental mercury.

Some micro-organisms can produce organic mercury, particularly methylmercury, from other mercury forms. Methylmercury can accumulate in living organisms and reach high levels in fish and marine mammals via a process called biomagnification (i.e. concentrations increase in the food chain).

Being an element, mercury cannot be broken down or degraded into harmless substances. Mercury may change between different states and species in its cycle, but its simplest form is elemental mercury, which itself is harmful to humans and the environment. Once mercury has been liberated from either ores or from fossil fuel and mineral deposits hidden in the Earth's crust and released into the biosphere, it can be highly mobile, cycling between the Earth's surface and the atmosphere. The Earth's surface soils, water bodies and bottom sediments are thought to be the primary biospheric sinks for mercury.

Mercury speciation

The different forms mercury exists in (such as elemental mercury vapour, methylmercury, or mercuric chloride) are commonly designated "species". As mentioned above, the main groups of mercury species are elemental mercury, inorganic and organic mercury forms. Speciation is the term commonly used to represent the distribution of a quantity of mercury among various species.

Speciation influences the transport of mercury within and between environmental compartments including the atmosphere and oceans, among others. For example, the speciation is a determining factor for how far from the source mercury emitted to air is transported. Mercury adsorbed on particles and ionic (e.g., divalent) mercury compounds will fall on land and water mainly in the vicinity of the sources (local to regional distances), while elemental mercury vapour is transported on a hemispherical/global scale making mercury emissions a global concern. Another example is the so-called "polar sunrise mercury depletion incidence", where the transformation of elemental mercury to divalent mercury is influenced by increased solar activity and the presence of ice crystals, resulting in a substantial increase in mercury deposition during a three-month period (approximately March to June).

Moreover, speciation determines how to control mercury emissions to air. For example, emissions of inorganic mercuric compounds (such as mercuric chloride) are captured reasonably well by some control devices (such as wet-scrubbers), while capture of elemental mercury tends to be low for most emission control devices.

Sources of mercury

The releases of mercury to the biosphere can be grouped in four categories: [3]

The majority of atmospheric anthropogenic emissions are released as gaseous elemental mercury. The atmospheric residence time of elemental mercury is in the range of months to roughly one year. This makes transport on a hemispherical scale possible and emissions in any continent can thus contribute to the deposition in other continents. Estimates developed in the early 2000s are that less than half of all mercury deposition within the U.S. comes from U.S. sources. [4] [5]

Anthropogenic sources

The largest emissions of mercury to the global atmosphere occur from combustion of fossil fuels; mainly coal in utility, industrial, and residential boilers. As much as two thirds of the total emission of ca. 2269 tonnes of mercury emitted from all anthropogenic sources worldwide in 2000 came from combustion of fossil fuels. [6] Other anthropogenic sources of mercury include: cement production (mercury in lime), mining (iron/steel, zinc, gold), use of fluorescent lamps, various instruments and dental amalgam fillings, manufacturing of products containing mercury (thermometers, manometers and other instruments, electrical and electronic switches) and waste disposal. [7]

Exposure to mercury

Mercury in the air eventually settles into water or onto land where it can be washed into water. Once deposited, certain microorganisms can change it into methylmercury, a highly toxic form that builds up in fish, shellfish and animals that eat fish. The general population is primarily exposed to methylmercury through the diet (especially fish) and to elemental mercury vapors due to dental amalgams. Depending on local mercury pollution load, substantial additional contributions to the intake of total mercury can occur through air and water.

Health effects

Exposure to mercury differs depending on the type of food as well as dietetic practices. In fact, the biggest contribution of mercury comes from different fish sources and seafood. This contribution is estimated to be around 20 to 85% of the mercury intake of the general population. Other sources are significant such as water consumption, some of the cereals choices, some specific vegetables as well as a variety of red and white meat. Dietetic practices are able to alter mercury toxicity such as chewing boiled eggs or even chewing gum. In fact, those two practices have been proved to be able to reduce mercury exposure by increasing the mercury release. Such practices, in addition to food intakes, might explain the differences observed between the populations regarding the mercury toxicity. Nutrients intake is another factor explaining the changes in the toxicity levels of mercury as well as their effects. Selenium for example works as a protective agent against mercury toxicity obtained through fish intake. Other nutrients such as thiamine deficiency at the general population demonstrates an aggravation of the mercury exposure symptoms. Similar to thiamine, iron aggravates mercury exposure effect while ascorbic acid will help reduce the mercury toxicity effect. Fat is another agent that participates in the reduction of the mercury toxicity. In fact, higher LDL levels has been proved to help reducing mercury effects.

In fact, those nutrients are able not only to affect the mercury bioavailability but they affect as well their immunological influences as well as their biochemical, cytological and metabolic responses to mercury. On the other hand, multiple nutrients are found to interact with several other nutrients and elements in such a manner that would affect the mercury exposure toxicity as well as their metabolism.

Moreover, a variety of fish, milk, meat and wheat accompagned of selenium, zinc, magnesium, and vitamins C, E and B allow an alteration of the mercury metabolism.

Those multifactorial correlations are extremely hard to establish. In fact, concluding that it is a protective or aggravating correlation is always complicated and dependent on metabolic conditions. [8]

Mercury exposure might have a variety of health effects depending on the population. In fact, some populations are affected by a lack of appetite others have seen a reduction of their food or fluid intake as well as a significant weight loss. Those alterations as well as the chronic intake of mercury might worsen a certain nutrition deficiency. Some of the most common deficiency observed with chronic mercury intake is a selenium deficiency. Such deficiency might impact neuronal functions as well as behaviour disorders and learning disabilities for children. Other deficiencies that are observed with a persisting mercury intake are vitamin E, vitamin B12 and vitamin C. Long term deficiency in vitamin E might cause muscle weakness as well as loss of muscle mass, abnormal eye movements and even vision problems. As for vitamin B12 deficiency, it might cause anemia and confusion for the elderly population. Finally, for long term vitamin C deficiencies, high blood pressure as well as gallbladder disease and stroke are all possible outcomes of those deficiencies. In order to avoid such deficiencies, a higher intake of those nutrients and vitamins are necessary. [9]

Methylmercury is a type of mercury that is liquid at room temperature. The methylmercury is used for the preservation of grains that are used for animal food. The methylmercury is obtained through the methylation of the mercury with the presence of anaerobic bacteria in the waters as well as sediments and soils. In fact, most microbes that live in lakes, rivers, oceans are able to create the methylmercury.

Methylmercury has different ways of transferring itself. In fact, methylmercury is transferred through maternal milk during breast feeding. This methylmercury in breast feeding milk is transferred through fatty cells that allows the methylmercury to be transported through the milk. Another way of transportation would be the placenta barrier that allows the methylmercury to be accumulated at the fetus levels. [10] [11]

Almost all people have at least trace amounts of methylmercury in their tissues, reflecting methylmercury's widespread presence in the environment and people's exposure through the consumption of fish and shellfish. Although the presence of Mercury is quite common, most people remain below the levels that can lead to contamination or poisoning. [12]

For fetuses, infants, and children, the primary health effect of methylmercury is impaired neurological development. Methylmercury exposure in the womb, which can result from a mother's consumption of fish and shellfish that contain methylmercury, can adversely affect a baby's growing brain and nervous system (see: Minamata disease ). Impacts on cognitive thinking, memory, attention, language, and fine motor and visual spatial skills have been seen in children exposed to methylmercury in the womb. [13] [14]

Elemental (metallic) mercury primarily causes health effects when it is breathed as a vapor where it can be absorbed through the lungs. These exposures can occur when elemental mercury is spilled or products that contain elemental mercury break and expose mercury to the air, particularly in warm or poorly ventilated indoor spaces. [15] [16] emotional changes (e.g., mood swings, irritability, nervousness, excessive shyness); insomnia; neuromuscular changes (such as weakness, muscle atrophy, twitching); headaches; disturbances in sensations; changes in nerve responses; performance deficits on tests of cognitive function. [17] [18] At higher exposures there may be kidney effects, respiratory failure and death.

For methylmercury, the US Environmental Protection Agency (US EPA) has estimated a safe daily intake level of 0.1 μg/kg body weight per day. [19]

The National Institute for Occupational Safety and Health (NIOSH) recommends that exposures to mercury metal be limited to an average of 0.05 mg/m3 over a 10-hour workday in addition to a ceiling limit of 0.1 mg/m3. The American Conference of Governmental Industrial Hygienists (ACGIH) recommends that metallic mercury exposures be limited to an average of 0.025 mg/m3 over an 8-hour workday. [20]

Environmental effects

A very important factor in the impacts of mercury to the environment is its ability to build up in organisms and up along the food chain. All forms of mercury can accumulate in organisms. However, methylmercury is taken up at a faster rate than other forms and bioaccumulates to a greater extent. The biomagnification of methylmercury has a most significant influence on the impact on animals and humans. Fish appear to bind methylmercury strongly, nearly 100 percent of mercury that bioaccumulates in predator fish is methylmercury. [21] Consequently, the elimination of methylmercury from fish is very slow. Given steady environmental concentrations, mercury concentrations in individuals of a given fish species tend to increase with age as a result of the slow elimination of methylmercury and increased intake due to changes in trophic position that often occur as fish grow to larger sizes. [22]

While much is generally known about mercury bioaccumulation and biomagnification, the process is extremely complex and involves complicated biogeochemical cycling and ecological interactions. As a result, although accumulation/magnification can be observed, the extent of mercury biomagnification in fish is not easily predicted across different sites. [23]

Several exposure pathways are possible for both plants and animals in terrestrial systems. The two main pathways by which terrestrial plants can be exposed to mercury are uptake from soils into the roots and absorption directly from the air. Potential exposure routes for terrestrial animals include the following: (1) ingestion of mercury-contaminated food; (2) direct contact with contaminated soil; (3) ingestion of mercury-contaminated drinking water; and (4) inhalation. [24]

U.S. regulations to prevent mercury contamination

Reasons for regulation

Inorganic mercury released into the atmosphere is converted to methylmercury by the action of microbes that live in aquatic systems including lakes, rivers, wetlands, sediments, soils and the open ocean. [25] The methylmercury is absorbed by plankton and small fish. As these organisms are consumed by larger species up the food chain, the mercury concentration is magnified. [26] Currently,[ when? ] humans around the world collectively emit 2000 metric tons per year. With strict regulations, the number could be decreased to 800 metric tons, however, if humans continue without stricter regulations, the number will increase to 3400 metric tons. [27] One factor that increases the effects of mercury contamination is the presence of coniferous forests. [28] Additionally, the fact that mercury can travel far distances from its location of release provides further justification for regulation. For instance, mercury contamination occurs in the Arctic and Antarctic, where it has not been released. [29]

Because mercury can travel from its release location to areas all over the world, and because fish is traded worldwide, mercury regulation that only focuses on the state or national level is not sufficient. [26] Examples of this ineffectiveness include states in the U.S. that regulate water quality with respect to mercury. Even if that state has strict mercury regulations, water quality can be negatively affected by mercury emissions from a neighboring state or country, demonstrating further need for global regulations. [26] Lastly, scientists stress the importance of developing long-term solutions to mercury contamination because, currently, the advice to avoid consuming high amounts of fish prevents people from getting vital nutrients, and is impractical in places where fish is the main source of food. [26]

Regulations governing use of mercury

Regulations associated with mercury use in commerce impose costs, conditions, and/or restrictions associated with obtaining, selling, using, or transporting mercury. The following categories describe mercury use regulations: (1) commerce-related regulations such as taxes and transportation requirements; (2) product-related restrictions; and (3) reporting requirements.

Mercury use regulations affect only those facilities that use mercury as an input. They do not affect those sources that release mercury incidentally as a by-product.

Commerce TypeRegulation [30] Law or ExampleMercury InformationRegulatory Mechanism
Obtaining MercuryExcise TaxInternal Revenue Code of 1986 (26 USCA §4661)The Internal Revenue Code imposes taxes on 40 chemicals, including mercury, that are sold by the manufacturer, producer, or importer . The tax rate for mercury is $4.45/ton, the second highest tax rate listed (10 substances have the highest tax rate of $4.87/ton).Input/sales tax
Import TaxHarmonized Tariff Schedule of the United StatesMercury and several mercury compounds are subject to import taxes under the Harmonized Tariff Schedule of the United States, which identifies import taxes on all goods imported into the United States from most-favored-nation (MFN) countries, as well as from special treaty nations and non-most-favored-nation (non-MFN) countries. For 1994, the tax rate for mercury imports from MFN countries is 16.5 ¢/kg, compared to a 55.1 ¢/kg tax on imports from non-MFN countries (item 2805.40). Due to special treaty agreements, no duty is imposed on mercury imports from Canada, Israel, Bolivia, Colombia, Ecuador, and Caribbean Basin countries.Tax
Government Mercury Stockpile SalesStrategic and Critical Materials Stockpile Act (50 USCA §98)The Strategic and Critical Materials Stockpile Act regulates mercury that the Defense Logistics Agency (DLA) sells from the National Defense Stockpile. The amount of mercury sold from the stockpile has the potential to affect the mercury market, although DLA considers its impact on the market when requesting Congressional authorization for sales. DLA accepts daily bids for mercury. Over the last year, the price of DLA mercury has ranged from $57 – 82 per flask.Command & Control
Transporting MercuryTransportationThe Hazardous Materials Transportation Act The Department of Transportation regulates hazardous materials transport under the Hazardous Materials Transportation Act (HMTA). Mercury and mercury compounds are hazardous substances subject to packaging, shipping and transportation rules for hazardous materials. RCRA regulations for hazardous waste transporters incorporate HMTA rulesOperating requirements, Labeling
Using MercuryUse restrictionsCurrently, only Minnesota has a use-restriction law providing that mercury sold in the state will be used only for medical, dental, instructional, research, or manufacturing purposes. Sellers must provide buyers with a material safety data sheet and have the buyer sign a statement of proper use and disposal.
Federal Insecticide, Fungicide and Rodenticide Act (FIFRA)
FIFRA covers the sale and use of pesticides, including registration of chemicals that meet health and safety tests. [30] Until recently, several mercury compounds were registered as pesticides, bactericides, and fungicides. By 1991, however, all registrations for mercury compounds in paints had been canceled by EPA or voluntarily withdrawn by the manufacturer. Registrations for calo-chlor and calo-gran, the last mercury-based pesticides registered for use in the United States (to control pink and grey snow mold) were voluntarily canceled by the manufacturer in November 1993. Existing stocks may be sold until depleted.
Federal Food, Drug, and Cosmetic Act (FFDCA)
The Food and Drug Administration is responsible for mercury in food, drugs, and cosmetics. Mercury use as a preservative or antimicrobial is limited to eye-area cosmetics or ointments in concentrations below 60ppm. Yellow mercuric oxide is not recognized as a safe and effective ophthalmic anti-infective ingredient. The FDA also regulates dental amalgam under FFDCA. Dental mercury is classified as a Class I medical device, with extensive safety regulations on its use. Dental amalgam alloy is classified as a Class II device, subject to additional special controls.
Mercury-Containing and Rechargeable Battery Management Act of 1996
The Mercury-Containing and Rechargeable Battery Management Act of 1996 (Battery Act) phases out the use of mercury in batteries, and provides for the efficient and cost-effective disposal of used nickel cadmium (Ni-Cd) batteries, used small sealed lead-acid (SSLA) batteries, and certain other regulated batteries. The statute applies to battery and product manufacturers, battery waste handlers, and certain battery and product importers and retailers.

Reporting requirements

At a federal level, only facilities that exceed threshold planning quantities for mercury under SARA Title III regulations must report that quantity to their local emergency planning commission. EPA is currently considering a chemical use inventory, which would track the quantities of chemicals used at individual facilities. [30]

Currently, only Michigan has regulations that specifically require facilities to report the quantities of chemicals used. Under the Part 9 rules of Act 245, Michigan's water pollution control act, businesses that use any substance listed on the "Critical Materials Registry" must report the quantities of each substance used and released. Mercury is included the Critical Materials Registry. The state uses this information to assist in permit development and compliance in its water program.

Regulations governing releases of mercury

Regulations associated with releases or mercury into the environment impose costs, conditions, and/or restrictions on activities that incidentally discharge mercury into the environment. The following categories describe mercury release regulations: (1) airborne releases; (2) effluent discharges into waters; (3) hazardous waste disposal; and (4) reporting requirements.

Airborne releases

The primary piece of federal legislation governing the airborne release of mercury in the United States is the Clean Air Act. [31] Unlike the criteria air pollutants, mercury is classified under the Act as a hazardous air pollutant and is thus subject to control under the National Emissions Standards for Hazardous Air Pollutants (NESHAP's) rather than the National Ambient Air Quality Standards (NAAQS). The key distinction is that the former is controlled by establishing performance standards under a program known as maximum achievable control technology standards (MACT), designed to reduce hazardous air pollutant emissions to a maximum achievable degree, by setting a standard at least as stringent as the emission reductions achieved by the average of the top 12% best controlled in the same pollution sources. [32] However, as of early 2011, no federal limits of mercury from coal and oil-fired electric utility steam generating units (EGUs) were on the books. The development of a regulatory policy framework to guide the emissions of mercury from power plants is on-going, the major developments of which have occurred largely within the last decade.

The movement toward the regulation of mercury from EGUs began in December 2000, when the Environmental Protection Agency determined the regulation of coal and oil-fired EGUs to be "appropriate and necessary" under the Clean Air Act, Section 112(c) standards for mercury emissions, adding these units to the list of sources that must be regulated. [33] This push gained further impetus in 2005, when the EPA released a report titled The Nata Inventory Modified for the Toxics Rule 2005 Base Year, [34] which linked 2/3's of the total amount of mercury released in 1990 to three source categories: stationary power plants, municipal waste combustors, and medical waste incinerators.

Additionally, according to the report the two latter categories saw 96% and 98% reductions of total mercury release, respectively, between the 15-year period between 1990 and 2005 while power plant emissions fell by only 10%. By 2005, coal-fired power plants made up the largest single source of airborne mercury emissions. [34]

Given these findings, the EPA reversed its earlier decision by offering a final revision of the 'appropriate and necessary finding' for coal and oil-fired EGUs by ultimately deciding to exclude these units from the 112 list. In its place, the EPA issued a rule to permanently cap and reduce mercury emissions from stationary power facilities. [35] The Clean Air Mercury Rule (CAMR) was designed to reduce emissions of mercury from stationary power plants through a cap-and-trade system of regulations, with the goal of a 70% reduction, from 48 to 15 tons annually. The proposed cap was set to be phased in two distinct phases, the first set at 38 tons annually while the second phase, set to commence 2018, required a cap of 15 tons annually. [36]

In December 2008, the D.C. Court of Appeals vacated the CAMR on the grounds that it illegally exempts utilities from the list of regulated source categories under the MACT standards. [35] On March 16, 2011 EPA proposes Mercury and Air Toxic Standards, the first nationwide limits on coal-fired power plant emissions of mercury. Specifically, the proposal aims to reduce emissions from new and existing coal and oil-fired EGUs by 91% from current levels through national quantity-based, numerical emission limits on mercury releases. [37] As part of this new rule, the EPA is also offering a proposal to "monitor" changes to industrial and commercial steam generating units New Source Performance Standard, but does not propose to change those emission standards. [38] According to the EPA, the Power Plant Mercury and Air Toxics Standards are expected to have broad health benefits (due to reductions in several pollutants, not just mercury), including the prevention in the year 2016 of between 6,800 and 17,000 premature deaths and 11,000 non-fatal heart attacks. [37] The EPA has also announced public hearings throughout the month of May. [39]

Under the Title V Operating Permits program, states may impose emissions fees up to $25/ton of emissions for all chemicals. Facilities releasing mercury are subject to this fee for their mercury emissions. Without a differential fee structure, the fee alone is not likely to be high enough to spur reductions in mercury emissions. For instance, Wisconsin's largest source of mercury air emissions, an electric utility, would only pay $15.90 for its mercury releases (.63 ton @$25/ton). [40]

Many states have operated independently from the federal EPA in setting their own emission reduction targets. In 2007, 18 states proposed more stringent abatement levels than what was proposed at the federal level at the time. [41]

Water pollution

The Clean Water Act governs pollution of surface waters. [42] In the first several decades since enactment of the 1972 law, EPA and states’ approach to mercury pollution focused on discharges to surface waters from point sources (principally factories, power plants, and sewage treatment plants). A variety of mercury discharge standards have been published in national regulations. Implementation of these standards, along with changes in manufacturing industries to reduce or eliminate use of mercury, has resulted in a reduction of mercury discharges to surface waters since the 1970s. [43] However, in the 21st century, mercury is still entering many water bodies through atmospheric deposition, mainly from combustion of coal. [44]

Point source regulatory program

Point source discharges require permits under the National Pollutant Discharge Elimination System (NPDES). [45] Facilities discharging to a river, lake or coastal water body are called "direct dischargers." Most permits are issued by state environmental agencies; EPA issues permits in certain jurisdictions. [46]

Technology-based standards

NPDES permits include technology-based effluent limitations, which are based on the performance of control and treatment technologies. [47] :1-3–1-5 Facilities that discharge to sewage treatment plants (also called publicly owned treatment works or POTWs) are classified as “indirect dischargers” and are subject to local sewage authority requirements. Industrial indirect dischargers, and some commercial facilities (including dental offices) are also subject to EPA regulations. [48]

EPA has included limitations for mercury discharges in nine of the technology-based industrial/commercial regulations ("effluent guidelines"):

  • Battery manufacturing [49]
  • Centralized waste treatment [50]
  • Dental offices [51]
  • Electric power plants. In 2015 EPA added mercury effluent limitations to its electric power plant regulation. [52]
  • Inorganic chemicals manufacturing [53]
  • Nonferrous metals manufacturing [54]
  • Ore mining [55]
  • Pesticide manufacturing (including a zero discharge of pollutants requirement for some facilities) [56]
  • Waste combustors (commercial incinerators) [57]

For other industries, limitations for mercury discharges may be included in permits if appropriate, according to the “best professional judgement” (BPJ) of the permit-issuing agency. [58] [47] :5-44–5-49

Indirect discharges of mercury to sewage treatment plants

Mercury (and other metals) that are discharged to POTWs are frequently typically removed within the treatment system and end up in the sewage plant's sludge. [59] POTWs may have mercury discharge limits in their permits, and may have difficulty disposing metal-contaminated sludges; therefore some POTW authorities limit or prohibit their industrial and commercial users from discharging mercury into the sewer system. Some authorities also promote voluntary mercury reduction/elimination practices with their customers. [60] [61]

Through the early 21st century, most POTWs did not regulate the dental amalgam waste (which contains mercury) disposed down the drains at dental offices. In 2005 the American Dental Association (ADA) estimated that 50% of the mercury entering POTWs was discharged by dental offices, as they disposed of dental amalgam waste. The ADA study and other research supported EPA's 2014 estimate that dental offices—over 100,000 nationwide—were annually sending 4.4 tons of mercury to POTWs. This finding contributed to the agency's decision to develop national effluent limitations for dental offices, which became effective in 2017. [59] [62]

Sewage sludge disposal standards

EPA's national standards for POTW sludge disposal set the following limits for mercury:

  • 57 mg/kg (maximum concentration)
  • 17 kg/ha (cumulative pollutant loading rate)
  • 0.85 kg/ha per 365-day period (annual pollutant loading rate).

Sludges applied below these levels may be disposed of on farms or other open land, or in landfills. [63]

Water quality standards

The Clean Water Act requires states to identify water bodies that are not meeting water quality standards, and to develop plans to address these impairments, in the form of total maximum daily loads (TMDLs). Several states have issued TMDLs specifically for mercury pollution:

  1. Seven northeastern states (Connecticut, Maine, Massachusetts, New York, New Hampshire, Vermont, Rhode Island) published a regional TMDL for mercury in 2007. The TMDL covers more than 10,000 lakes, ponds, and reservoirs, and over 46,000 river miles (74,000 km). The focus of the plan is on reducing atmospheric deposition of mercury, which is the principal pollution source, rather than developing additional controls on point source or nonpoint source discharges. [64]
  2. Minnesota published its statewide TMDL for mercury in 2007. Ninety-nine percent of the mercury in Minnesota waters is from air deposition; two-thirds of the state's water bodies have been contaminated by mercury. [65]
Fish consumption advisories

EPA and state agencies publish fish consumption advisories which identify fishing locations (water bodies) and types of fish that should be avoided due to mercury contamination. [66] [67]

Hazardous Waste

Resource Conservation and Recovery Act (RCRA) regulations outline specific classification and disposal requirements for products and wastes that contain mercury. In general, RCRA regulations are waste-specific, not source-specific, and thus may apply to any facility that generates mercury-containing wastes. RCRA regulations assign specific waste codes to five types of wastes that are either "characteristic" wastes or "listed" wastes. Mercury is both a characteristic and a listed waste under RCRA. [40] RCRA regulations describe specific disposal requirements for individual waste codes. All mercury-bearing wastes (wastewaters and nonwastewaters) are subject to land disposal restrictions. RCRA regulations also influence product disposal and recycling options for mercury containing products. [40] On February 23, 2011, following ten years of litigation, the EPA released scaled-back air emission rules for industrial boilers and solid waste incinerators. The recently released final rules address hazardous air pollutant ("HAP") emission standards for industrial, commercial and institutional boilers and process heaters (the Boiler Maximum Achievable Control Technology or "Boiler MACT" rule) and commercial and industrial solid waste incineration units (the "CISWI" rule). [68] Industrial boilers and process heaters burn fuels such as natural gas, biomass, coal and oil to produce heat or electricity; CISWIs burn solid waste. The Boiler MACT rules create emission limits for mercury, particulate matter and carbon monoxide for all new coal-fired boilers with heat input greater than 10 million Btu per hour and particulate matter emission limits for new biomass and oil-fired boilers. [69]

Reporting requirements

Emergency Planning and Community Right-to-Know Act establishes emergency release, inventory, and release reporting requirements. The requirement includes the Toxics Release Inventory (TRI), which requires facilities in the manufacturing sector (SIC codes 20-39) to report releases to air, water, and land for all listed chemicals, including mercury. Other sections require facilities to report spills of listed substances above a threshold reporting quantity (reportable quantities), and the quantities of chemicals stored above a specified threshold planning quantity. [40]

U.S. environmental standards

MediaMercury Standard [30] Explanation
Ambient Water Recommendations for Aquatic Life
  • 1.4 μg/L for freshwater maximum acute concentrations (CMC)
  • 0.77 μg/L for freshwater continuous concentrations (CCC)
  • 1.8 μg/L for saltwater maximum acute concentrations (CMC)
  • 0.94 μg/L for saltwater continuous concentrations (CCC)
  • These recommendations are for methylmercury (MeHg) concentrations; CMC ≡ Criterion Maximum Concentration (acute); CCC ≡ Criterion Continuous Concentration (chronic) [70]
Drinking Water
  • Maximum contaminant level = 0.002 mg/L (40 CFR 141.62)
Groundwater
  • 2 μg/L
Bottled Water
  • 0.002 mg/L (21 CFR 103.35)
Water-level of detect
  • 0.2 μg/L (200 ng/L) = recommended method
  • EPA-approved method to detect Hg in water. Lower detection methods are available, but not yet approved by EPA
Air
  • No ambient standard
Sewage Sludge
  • 17 mg/kg (dry wt) and 17 kg/hectare cumulative loading for sludge applied on agricultural, forest and publicly accessible lands (40 CFR 503, Table 2 of §503.13)
  • 17 mg/kg (dry wt) and .85 kg/hectare annual loading rate for sludge sold or distributed for application to a lawn or home garden (40 CFR 503, Table 3 of §503.13)
  • 57 mg/kg (dry wt) for sludge sold or distributed for other types of land disposal (40 CFR 503, Table 1 of §503.13)
Compost
  • No federal standards
  • Minnesota sets mercury concentration limits incompost
Fish
  • 1 mg/kg
  • 0.3 mg/kg
  • FDA action level for methylmercury
  • EPA maximum recommended fish tissue methylmercury residue based on a total fish consumption rate of 0.0175 kg/day [71]
Hazardous Waste
  • TCLP leachate ≥ 0.2 mg/L (40 CFR 261.24, 264)
  • Land disposal (Subtitle D, nonhazardous landfills) prohibited unless leachate contains less than 0.2 mg/L

Global regulations

Global convention

Convention on Long-range Transboundary Air Pollution and The 1998 Aarhus Protocol on Heavy Metals

Since 1979 the Convention on Long-range Transboundary Air Pollution has addressed some of the major environmental problems of the UNECE region through scientific collaboration and policy negotiation. The Convention has been extended by eight protocols that identify specific measures to be taken by Parties to cut their emissions of air pollutants. [72] The Executive Body adopted the Protocol on Heavy Metals on 24 June 1998 in Aarhus (Denmark). It targets three particularly harmful metals: cadmium, lead and mercury. According to one of the basic obligations, Parties will have to reduce their emissions for these three metals below their levels in 1990 (or an alternative year between 1985 and 1995). The Protocol aims to cut emissions from industrial sources (iron and steel industry, non-ferrous metal industry), combustion processes (power generation, road transport) and waste incineration. It lays down stringent limit values for emissions from stationary sources and suggests best available techniques (BAT) for these sources, such as special filters or scrubbers for combustion sources or mercury-free processes. The Protocol requires Parties to phase out leaded petrol. It also introduces measures to lower heavy metal emissions from other products, such as mercury in batteries, and proposes the introduction of management measures for other mercury-containing products, such as electrical components (thermostats, switches), measuring devices (thermometers, manometers, barometers), fluorescent lamps, dental amalgam, pesticides and paint. [73]

The Basel Convention

The Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal was brought into force in 1992 in order to prevent the transportation of hazardous wastes to developing countries. Over 170 countries have now joined the convention, including Australia who became a member of the Basel Convention on 5 February 1992. [74]

The Rotterdam PIC Convention

The Rotterdam PIC Convention is a means for formally obtaining and disseminating information so that decisions can be made by importing countries as to whether they wish to receive future shipments of certain chemicals and for ensuring compliance with these decisions by exporting countries. The Convention promotes shared responsibility between exporting and importing countries in protecting human health and the environment from the harmful effects of such chemicals and provides for the exchange of information about potentially hazardous chemicals that may be exported and imported. A key goal of the Rotterdam PIC Convention is to provide technical assistance for developing countries and countries with economies in transition to develop the infrastructure and capacity necessary to implement the provisions of the Convention. Substances covered under the Convention: Mercury compounds including inorganic and organometallic mercury compounds. [75]

Helsinki Commission

The Helsinki Commission was created in 1974 to decrease mercury emissions to the Baltic Sea. [29]

Barcelona Commission

The Barcelona Commission was created in 1974 to reduce mercury emissions to the Mediterranean Sea. [29]

The Great Lakes Water Quality Agreement

The Great Lakes Water Quality Agreement started between US and Canada in 1972 and was designed to limit various pollutants in the lakes, including mercury. [29]

The North Sea Directive

The North Sea Directive between Denmark, Belgium, France, Germany, Switzerland, The Netherlands, Norway, Sweden, and the United Kingdom was created to reduce the amount of mercury going into the North Sea. [29]

UNEP Global Mercury Negotiation and Partnership

Global Legally Binding Instrument on Mercury

In February 2009, the Governing Council of UNEP agreed on the need to develop a global legally binding instrument on mercury. Participation in the intergovernmental negotiating committee (INC) is open to all Governments. Following the conclusion of the negotiations, the text will be open for signature at a diplomatic conference (Conference of Plenipotentiaries), which was held in 2013 in Japan. [76]

UNEP Global Mercury Partnership Action Priorities

Most of the priorities for action to reduce risk from mercury have been defined within partnerships:

  • Reducing Mercury in Artisanal and Small-Scale Gold Mining:

Artisanal and small-scale gold mining (ASGM) is a complex global development issue. Reaching out to individual miners is challenging, with an estimated 10-15 million artisanal and small-scale gold miners globally in approximately 70 countries. ASGM is the largest demand sector for mercury globally (estimated at 650-1000 tonnes in 2005). Low mercury and mercury free solutions are available. [77]

  • Mercury Control from Coal Combustion:

Burning of coal is the largest single anthropogenic source of mercury air emissions. Coal burning for power generation is increasing. Although coal contains only small concentrations of mercury, it is burnt in very large volumes. Household burning of coal is also a significant source of mercury emissions and a health hazard. The objective of this partnership area is continued minimization and elimination of mercury releases from coal combustion where possible. [78]

  • Mercury Reduction in the Chlor-alkali Sector:

Mercury cell chlor-alkali production is a significant user of mercury and a source of mercury releases to the environment. The mercury used in this process acts as a catalyst in the chlorine production process. Best practices, such as proper waste management, can minimize the release of mercury. Mercury-free technologies are also available in chlor-alkali production. [79]

  • Mercury Reduction in Products:

Transition success has been demonstrated in thermometers, switches and relays, batteries other than button cells, thermostats, HID auto discharge lamps, and sphygmomanometers. Reducing mercury in products may be the most effective means to control mercury in waste. Sound management should consider all stages of the product's life-cycle. Clear regulation can prompt manufacturers to produce mercury-free products. [80]

  • Mercury Air Transport and Fate Research:

Fate and transport research is important in setting and implementing national, regional and global priorities. It also helps establish baselines to monitor and assess progress on mercury reductions. [81]

The management of mercury and mercury-containing waste is the last step in the product life-cycle. The elimination of mercury in products and processes may be the most efficient way to avoid the presence of any form of mercury in waste. [82]

  • Mercury Supply and Storage:

Mercury is an element and cannot be destroyed. Policies designed to decrease the production, use and trade of mercury must be accompanied by access to viable, safe and secure long term storage. Investing in supply, trade, and storage issue is more efficient than trying to control mercury release. [83]

Toolkit for Identification and Quantification of Mercury Releases

The "Toolkit for identification and quantification of mercury releases", the "Mercury Toolkit", is intended to assist countries to develop a mercury releases inventory. It provides a standardized methodology and accompanying database enabling the development of consistent national and regional mercury inventories. National inventories will assist countries to identify and address mercury releases. [84]

See also

Related Research Articles

<span class="mw-page-title-main">Pollutant</span> Substance or energy damaging to the environment

A pollutant or novel entity is a substance or energy introduced into the environment that has undesired effects, or adversely affects the usefulness of a resource. These can be both naturally forming or anthropogenic in origin. Pollutants result in environmental pollution or become public health concerns when they reach a concentration high enough to have significant negative impacts.

<span class="mw-page-title-main">United States Environmental Protection Agency</span> U.S. federal government agency

The Environmental Protection Agency (EPA) is an independent agency of the United States government tasked with environmental protection matters. President Richard Nixon proposed the establishment of EPA on July 9, 1970; it began operation on December 2, 1970, after Nixon signed an executive order. The order establishing the EPA was ratified by committee hearings in the House and Senate.

<span class="mw-page-title-main">Mercury poisoning</span> Poisoning caused by mercury chemicals

Mercury poisoning is a type of metal poisoning due to exposure to mercury. Symptoms depend upon the type, dose, method, and duration of exposure. They may include muscle weakness, poor coordination, numbness in the hands and feet, skin rashes, anxiety, memory problems, trouble speaking, trouble hearing, or trouble seeing. High-level exposure to methylmercury is known as Minamata disease. Methylmercury exposure in children may result in acrodynia in which the skin becomes pink and peels. Long-term complications may include kidney problems and decreased intelligence. The effects of long-term low-dose exposure to methylmercury are unclear.

<span class="mw-page-title-main">Methylmercury</span> Toxic chemical compound

Methylmercury (sometimes methyl mercury) is an organometallic cation with the formula [CH3Hg]+. It is the simplest organomercury compound. Methylmercury is extremely toxic, and its derivatives are the major source of organic mercury for humans. It is a bioaccumulative environmental toxicant with a 50-day half-life. Methylmercury is the causative agent of the infamous Minamata disease.

<span class="mw-page-title-main">Industrial wastewater treatment</span> Processes used for treating wastewater that is produced by industries as an undesirable by-product

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans. This applies to industries that generate wastewater with high concentrations of organic matter, toxic pollutants or nutrients such as ammonia. Some industries install a pre-treatment system to remove some pollutants, and then discharge the partially treated wastewater to the municipal sewer system.

<span class="mw-page-title-main">Concentrated animal feeding operation</span> Type of American intensive animal farming

In animal husbandry, a concentrated animal feeding operation (CAFO), as defined by the United States Department of Agriculture (USDA), is an intensive animal feeding operation (AFO) in which over 1,000 animal units are confined for over 45 days a year. An animal unit is the equivalent of 1,000 pounds of "live" animal weight. A thousand animal units equates to 700 dairy cows, 1,000 meat cows, 2,500 pigs weighing more than 55 pounds (25 kg), 10,000 pigs weighing under 55 pounds, 10,000 sheep, 55,000 turkeys, 125,000 chickens, or 82,000 egg laying hens or pullets.

New Source Performance Standards (NSPS) are pollution control standards issued by the United States Environmental Protection Agency (EPA). The term is used in the Clean Air Act Extension of 1970 (CAA) to refer to air pollution emission standards, and in the Clean Water Act (CWA) referring to standards for water pollution discharges of industrial wastewater to surface waters.

<span class="mw-page-title-main">Effluent</span> Liquid waste or sewage discharged into a river or the sea

Effluent is wastewater from sewers or industrial outfalls that flows directly into surface waters, either untreated or after being treated at a facility. The term has slightly different meanings in certain contexts, and may contain various pollutants depending on the source.

Effluent Guidelines are U.S. national standards for wastewater discharges to surface waters and publicly owned treatment works (POTW). The United States Environmental Protection Agency (EPA) issues Effluent Guideline regulations for categories of industrial sources of water pollution under Title III of the Clean Water Act (CWA). The standards are technology-based, i.e. they are based on the performance of treatment and control technologies. Effluent Guidelines are not based on risk or impacts of pollutants upon receiving waters.

Title 40 is a part of the United States Code of Federal Regulations. Title 40 arranges mainly environmental regulations that were promulgated by the US Environmental Protection Agency (EPA), based on the provisions of United States laws. Parts of the regulation may be updated annually on July 1.

<span class="mw-page-title-main">Health and environmental impact of the coal industry</span>

The health and environmental impact of the coal industry includes issues such as land use, waste management, water and air pollution, caused by the coal mining, processing and the use of its products. In addition to atmospheric pollution, coal burning produces hundreds of millions of tons of solid waste products annually, including fly ash, bottom ash, and flue-gas desulfurization sludge, that contain mercury, uranium, thorium, arsenic, and other heavy metals. Coal is the largest contributor to the human-made increase of carbon dioxide in Earth's atmosphere.

To protect the environment from the adverse effects of pollution, many nations worldwide have enacted legislation to regulate various types of pollution as well as to mitigate the adverse effects of pollution. At the local level, regulation usually is supervised by environmental agencies or the broader public health system. Different jurisdictions often have different levels regulation and policy choices about pollution. Historically, polluters will lobby governments in less economically developed areas or countries to maintain lax regulation in order to protect industrialisation at the cost of human and environmental health.

<span class="mw-page-title-main">Mercury in fish</span>

The presence of mercury in fish is a health concern for people who eat them, especially for women who are or may become pregnant, nursing mothers, and young children. Fish and shellfish concentrate mercury in their bodies, often in the form of methylmercury, a highly toxic organomercury compound. This element is known to bioaccumulate in humans, so bioaccumulation in seafood carries over into human populations, where it can result in mercury poisoning. Mercury is dangerous to both natural ecosystems and humans because it is a metal known to be highly toxic, especially due to its neurotoxic ability to damage the central nervous system.

A Discharge Monitoring Report (DMR) is a United States regulatory term for a periodic water pollution report prepared by industries, municipalities and other facilities discharging to surface waters. The facilities collect wastewater samples, conduct chemical and/or biological tests of the samples, and submit reports to a state agency or the United States Environmental Protection Agency (EPA). All point source dischargers to ”Waters of the U.S.” must obtain a National Pollution Discharge Elimination System (NPDES) permit from the appropriate agency, and many permittees are required to file DMRs.

<span class="mw-page-title-main">Environmental impact of paper</span>

The environmental impact of paper are significant, which has led to changes in industry and behaviour at both business and personal levels. With the use of modern technology such as the printing press and the highly mechanized harvesting of wood, disposable paper became a relatively cheap commodity, which led to a high level of consumption and waste. The rise in global environmental issues such as air and water pollution, climate change, overflowing landfills and clearcutting have all lead to increased government regulations. There is now a trend towards sustainability in the pulp and paper industry as it moves to reduce clear cutting, water use, greenhouse gas emissions, fossil fuel consumption and clean up its influence on local water supplies and air pollution.

<span class="mw-page-title-main">Ash pond</span> Coal plant disposal structure

An ash pond, also called a coal ash basin or surface impoundment, is an engineered structure used at coal-fired power stations for the disposal of two types of coal combustion products: bottom ash and fly ash. The pond is used as a landfill to prevent the release of ash into the atmosphere. Although the use of ash ponds in combination with air pollution controls decreases the amount of airborne pollutants, the structures pose serious health risks for the surrounding environment.

<span class="mw-page-title-main">Water quality law</span>

Water quality laws govern the protection of water resources for human health and the environment. Water quality laws are legal standards or requirements governing water quality, that is, the concentrations of water pollutants in some regulated volume of water. Such standards are generally expressed as levels of a specific water pollutants that are deemed acceptable in the water volume, and are generally designed relative to the water's intended use - whether for human consumption, industrial or domestic use, recreation, or as aquatic habitat. Additionally, these laws provide regulations on the alteration of the chemical, physical, radiological, and biological characteristics of water resources. Regulatory efforts may include identifying and categorizing water pollutants, dictating acceptable pollutant concentrations in water resources, and limiting pollutant discharges from effluent sources. Regulatory areas include sewage treatment and disposal, industrial and agricultural waste water management, and control of surface runoff from construction sites and urban environments. Water quality laws provides the foundation for regulations in water standards, monitoring, required inspections and permits, and enforcement. These laws may be modified to meet current needs and priorities.

<span class="mw-page-title-main">Water pollution in the United States</span> Overview of water pollution in the United States of America

Water pollution in the United States is a growing problem that became critical in the 19th century with the development of mechanized agriculture, mining, and industry, although laws and regulations introduced in the late 20th century have improved water quality in many water bodies. Extensive industrialization and rapid urban growth exacerbated water pollution as a lack of regulation allowed for discharges of sewage, toxic chemicals, nutrients and other pollutants into surface water.

<span class="mw-page-title-main">United States regulation of point source water pollution</span>

Point source water pollution comes from discrete conveyances and alters the chemical, biological, and physical characteristics of water. In the United States, it is largely regulated by the Clean Water Act (CWA). Among other things, the Act requires dischargers to obtain a National Pollutant Discharge Elimination System (NPDES) permit to legally discharge pollutants into a water body. However, point source pollution remains an issue in some water bodies, due to some limitations of the Act. Consequently, other regulatory approaches have emerged, such as water quality trading and voluntary community-level efforts.

<span class="mw-page-title-main">Marine mercury pollution</span> Mercury contamination in sea and sediments

Mercury is a heavy metal that cycles through the atmosphere, water, and soil in various forms to different parts of the world. Due to this natural mercury cycle, irrespective of which part of the world releases mercury it could affect an entirely different part of the world making mercury pollution a global concern. Mercury pollution is now identified as a global problem and awareness has been raised on an international action plan to minimize anthropogenic mercury emissions and clean up mercury pollution. The 2002 Global Mercury Assessment concluded that "International actions to address the global mercury problem should not be delayed". Among many environments that are under the impact of mercury pollution, the ocean is one which cannot be neglected as it has the ability to act as a "storage closet" for mercury. According to a recent model study the total anthropogenic mercury released into the ocean is estimated to be around 80,000 to 45,000 metric tons and two-thirds of this amount is estimated to be found in waters shallower than 1000m level where much consumable fish live. Mercury can bioaccumulate in marine food chains in the form of highly toxic methylmercury which can cause health risks to human seafood consumers. According to statistics, about 66% of global fish consumption comes from the ocean. Therefore, it is important to monitor and regulate oceanic mercury levels to prevent more and more mercury from reaching the human population through seafood consumption.

References

  1. United States Environmental Protection Agency (EPA), Washington, D.C. (2012-02-16). "National Emission Standards for Hazardous Air Pollutants From Coal- and Oil-Fired Electric Utility Steam Generating Units and Standards of Performance for Fossil-Fuel-Fired Electric Utility, Industrial-Commercial-Institutional, and Small Industrial-Commercial-Institutional Steam Generating Units." Final rule. Federal Register,77 FR 9303
  2. "Basic Information about Mercury and Air Toxics Standards". United States Environmental Protection Agency. 2017-06-08. Archived from the original on 2020-03-07. Retrieved 2020-03-08.
  3. "Summary of the assessment report". Global Mercury Assessment. United Nations Environment Programme. 2002-12-01. Archived from the original on 2003-08-22. Retrieved 2011-04-11.
  4. Seigneur C, Vijayaraghavan K, Lohman K, Karamchandani P, Scott C (January 2004). "Global source attribution for mercury deposition in the United States" (PDF). Environ. Sci. Technol. 38 (2): 555–69. Bibcode:2004EnST...38..555S. doi:10.1021/es034109t. PMID   14750733. Archived (PDF) from the original on 2012-03-18. Retrieved 2011-04-07.
  5. Travnikov O, Ryaboshapko A. "Modelling of Mercury Hemispheric Transport and Depositions". MSC-E Technical Report 6/2002. Meteorological Synthesizing Centre - East. Archived from the original on 2004-09-05. Retrieved 2011-04-08.
  6. Pacyna EG, Pacyna JM (July 2006). "Global anthropogenic mercury emission inventory for 2000". Atmospheric Environment. 40 (22): 4048–4063. Bibcode:2006AtmEn..40.4048P. doi:10.1016/j.atmosenv.2006.03.041.
  7. Pacyna JM, EG Pacyna (2005). "Anthropogenic sources and global inventory of mercury emissions". In Percival JB, Parsons MD (eds.). Mercury: sources, measurements, cycles and effects. Ottawa, Ont: Mineralogical Association of Canada. ISBN   0-921294-34-4.
  8. Hill CH (1980). "Interactions of Vitamin C with Lead and Mercury". Annals of the New York Academy of Sciences. 355 (1): 262–266. Bibcode:1980NYASA.355..262H. doi:10.1111/j.1749-6632.1980.tb21344.x. PMID   6940480. S2CID   997855.
  9. Hill CH (1979). "Studies on the ameliorating effect of ascorbic acid on mineral toxicities in the chick". J. Nutr. 109 (1): 84–90. doi:10.1093/jn/109.1.84. PMID   430217.
  10. Suzuki T, Matsumoto T, Miyama T, et al. (1967). "Placental Transfer of Mercuric Chloride, Phenyl Mercury Acetate and Methyl Mercury Acetate in Mice". Ind. Health. 5 (2): 149–155. doi: 10.2486/indhealth.5.149 .
  11. Sundberg J, Ersson B, Lonnerdal B, Oskarsson A (1999). "Protein binding of mercury in milk and plasma from mice and man—a comparison between methylmercury and inorganic mercury". Toxicology. 137 (3): 169–184. Bibcode:1999Toxgy.137..169S. doi:10.1016/s0300-483x(99)00076-1. PMID   10522497.
  12. "Mercury Fact Sheet" (PDF). United States Centers for Disease Control and Prevention (CDC). 2009-11-01. Archived from the original (PDF) on 2010-12-25. Retrieved 2011-04-09.
  13. Toxicological effects of methylmercury. Washington, D.C.: National Academy Press. 2000. ISBN   0-309-07140-2.
  14. Steuerwald U, Weihe P, Jørgensen PJ, Bjerve K, Brock J, Heinzow B, Budtz-Jørgensen E, Grandjean P (May 2000). "Maternal seafood diet, methylmercury exposure, and neonatal neurologic function" (PDF). J. Pediatr. 136 (5): 599–605. doi:10.1067/mpd.2000.102774. PMID   10802490. S2CID   20245515.
  15. Smith RG, Vorwald AJ, Patil LS, Mooney TF (1970). "Effects of exposure to mercury in the manufacture of chlorine". Am Ind Hyg Assoc J. 31 (6): 687–700. doi:10.1080/0002889708506315. PMID   5275968.
  16. Albers JW, Kallenbach LR, Fine LJ, Langolf GD, Wolfe RA, Donofrio PD, Alessi AG, Stolp-Smith KA, Bromberg MB (November 1988). "Neurological abnormalities associated with remote occupational elemental mercury exposure". Ann. Neurol. 24 (5): 651–9. doi:10.1002/ana.410240510. hdl: 2027.42/50328 . PMID   2849369. S2CID   6995760.
  17. Levine SP, Cavender GD, Langolf GD, Albers JW (May 1982). "Elemental mercury exposure: peripheral neurotoxicity". Br J Ind Med. 39 (2): 136–9. doi:10.1136/oem.39.2.136. PMC   1008958 . PMID   6279139.
  18. McFarland RB, Reigel H (August 1978). "Chronic mercury poisoning from a single brief exposure". J Occup Med. 20 (8): 532–4. doi:10.1097/00043764-197808000-00003. PMID   690736.
  19. "Mercury: Human Exposure". United States Environmental Protection Agency (EPA). 2010-10-01. Retrieved 2011-04-09.
  20. "Protecting Workers from Mercury Exposure While Crushing and Recycling Fluorescent Bulbs" (PDF). OSHA. Archived (PDF) from the original on 11 April 2024. Retrieved 10 July 2024.
  21. Bloom NS, Watras CJ, Hurley JP (1991). "Impact of acidification on the methylmercury cycle of remote seepage lakes". Water, Air, & Soil Pollution. 56 (1): 477–491. Bibcode:1991WASP...56..477B. doi:10.1007/BF00342293. S2CID   96087325.
  22. "Fate and Transport of Mercury in the Environment" (PDF). Mercury Study Report to Congress, EPA-452/R-97-005. United States Environmental Protection Agency (EPA) Office of Air Quality Planning and Standards and Office of Research and Development. 1997-12-01. Archived from the original (PDF) on 2000-09-18. Retrieved 2011-04-09.
  23. United Nations Environment Programme. (2008) Global Mercury Assessment: Summary of the report Archived 2003-08-22 at the Wayback Machine . Retrieved 4/5/11
  24. EPA (U.S. Environmental Protection Agency). (1997). Mercury Study Report to Congress. Volume VI: An Ecological Assessment for Anthropogenic Mercury Emissions in the United States Archived 2011-02-13 at the Wayback Machine . EPA-452/R-97-008. U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards and Office of Research and Development.
  25. Ullrich, Susanne; Tanton, Trevor; Abdrashitova, Svetlana (2001). "Mercury in the Aquatic Environment: A Review of Factors Affecting Methylation". Critical Reviews in Environmental Science and Technology. 31 (3): 241–293. Bibcode:2001CREST..31..241U. doi:10.1080/20016491089226. S2CID   96462553.
  26. 1 2 3 4 Lambert, Kathleen F.; Evers, David C. (2012-08-15). "Integrating mercury science and policy in the marine context: Challenges and opportunities". Environmental Research. 119: 132–142. Bibcode:2012ER....119..132L. doi:10.1016/j.envres.2012.06.002. PMC   4271454 . PMID   22901766.
  27. Krabbenhoft, David P.; Sunderland, Elise M. (2013-09-27). "Global Change and Mercury". Environmental Science. 341 (6153): 1457–1458. Bibcode:2013Sci...341.1457K. doi:10.1126/science.1242838. PMID   24072910. S2CID   39419890.
  28. Drenner, Ray W.; Chumchal, Matthew M. (2013). "Effects of Mercury Deposition and Coniferous Forests on the Mercury Contamination of Fish in the South Central United States". Environmental Science and Technology. 47 (3): 1274–1279. Bibcode:2013EnST...47.1274D. CiteSeerX   10.1.1.704.275 . doi:10.1021/es303734n. PMID   23286301.
  29. 1 2 3 4 5 Rallo, Manuela; Lopez-Anton, M. Antonia (2011-11-17). "Mercury policy and regulations for coal-fired power plants". Environmental Science and Pollution Research. 19 (4): 1084–96. doi:10.1007/s11356-011-0658-2. hdl: 10261/182619 . PMID   22090257. S2CID   15335213.
  30. 1 2 3 4 "Great Lakes Binational Toxics Strategy". Great Lakes Pollution Prevention and Toxics Reduction. United States Environmental Protection Agency. 2008-09-05. Archived from the original on 2011-02-04. Retrieved 2011-04-07.
  31. "Mercury Quick Finder". United States Environmental Protection Agency. 2011-05-06. Archived from the original on 2007-02-08. Retrieved 2011-05-08.
  32. "NESHAPS Maximum Achievable Control Technology (MACT)". United States Environmental Protection Agency. 2008-09-05. Archived from the original on 2011-05-09. Retrieved 2011-05-08.
  33. "Controlling Power Plant Emissions: Chronology". United States Environmental Protection Agency. 2010-10-01. Archived from the original on 2011-01-30. Retrieved 2011-05-08.
  34. 1 2 "Technology Transfer Network Air Toxics 2005 National-Scale Air Toxics Assessment". United States Environmental Protection Agency. 2011-02-24. Archived from the original on 2011-06-12. Retrieved 2011-05-08.
  35. 1 2 "Mercury in Your Environment". United States Environmental Protection Agency. 8 July 2013. Archived from the original on 30 January 2011. Retrieved 3 May 2011.
  36. "EPA: Clean Air Mercury Rule". Archived from the original on 2015-09-05.
  37. 1 2 "FACT SHEET PROPOSED MERCURY AND AIR TOXICS STANDARDS" (PDF). Archived (PDF) from the original on 17 June 2011. Retrieved 3 May 2011.
  38. "TheAirToxicsRule Proposal" (PDF). Archived from the original (PDF) on 29 September 2011.
  39. "Regulatory Actions - Reducing Toxic Air Emissions From Power Plants". United States Environmental Protection Agency. Archived from the original on 2015-07-03. Retrieved 2011-05-03.
  40. 1 2 3 4 "The Great Lakes". United States Environmental Protection Agency. 20 August 2015. Archived from the original on 4 February 2011. Retrieved 6 April 2011.
  41. "Archived copy" (PDF). Archived from the original (PDF) on 2009-02-10. Retrieved 2011-05-03.{{cite web}}: CS1 maint: archived copy as title (link)
  42. United States. Federal Water Pollution Control Act Amendments of 1972. Pub. L. Tooltip Public Law (United States)  92–500 1972-10-18.
  43. "Volume I: Executive Summary". Mercury Study Report to Congress (Report). United States Environmental Protection Agency. December 1997. pp. 3–7–3–8. EPA 452-R-97/003. Archived from the original on 2019-02-12. Retrieved 2019-02-13.
  44. "Advisories and Technical Resources for Fish and Shellfish Consumption". US Geological Survey. June 2010. Archived from the original on 2017-05-05. Retrieved 2019-02-13.
  45. "National Pollutant Discharge Elimination System". United States Environmental Protection Agency. 2018-12-12. Archived from the original on 2015-09-01. Retrieved 2019-02-13.
  46. "NPDES State Program Information". National Pollutant Discharge Elimination System. United States Environmental Protection Agency. 2018-08-20. Archived from the original on 2018-10-17. Retrieved 2019-02-13.
  47. 1 2 NPDES Permit Writers' Manual (Report). United States Environmental Protection Agency. September 2010. EPA-833-K-10-001. Archived from the original on 2018-10-17. Retrieved 2019-02-13.
  48. Introduction to the National Pretreatment Program (Report). United States Environmental Protection Agency. June 2011. 833-B-11-001. Archived from the original on 2019-03-29. Retrieved 2019-02-13.
  49. EPA. "Battery Manufacturing Point Source Category." Effluent Guidelines and Standards. Code of Federal Regulations, 40 CFR 461
  50. EPA. "Centralized Waste Treatment Point Source Category." Effluent Guidelines and Standards. 40 CFR 437
  51. EPA. "Dental Office Point Source Category." Effluent Guidelines and Standards. 40 CFR 441
  52. EPA. "Effluent Limitations Guidelines and Standards for the Steam Electric Power Generating Point Source Category." Federal Register, 2015-11-03, 80 FR 67837. 40 CFR 423
  53. EPA. "Inorganic Chemicals Manufacturing Point Source Category." Effluent Guidelines and Standards. 40 CFR 415
  54. EPA. "Nonferrous Metals Manufacturing Point Source Category." Effluent Guidelines and Standards. 40 CFR 421
  55. EPA. "Ore Mining and Dressing Point Source Category." Effluent Guidelines and Standards. 40 CFR 440
  56. EPA. "Pesticide Manufacturing Point Source Category." Effluent Guidelines and Standards. 40 CFR 455
  57. EPA. "Waste Combustors Point Source Category." Effluent Guidelines and Standards. 40 CFR 444
  58. EPA. "Technology-based treatment requirements in permits." Criteria And Standards for the National Pollutant Discharge Elimination System. 40 CFR 125.3(c)(2) Archived 2019-02-13 at the Wayback Machine
  59. 1 2 EPA. "Effluent Limitations Guidelines and Standards for the Dental Category; Proposed Rule." 2014-10-22. 79 FR 63257
  60. Massachusetts Water Resources Authority, Boston, MA. "Toxic Reduction and Control (TRAC)." Archived 2019-02-13 at the Wayback Machine
  61. Association of Metropolitan Sewerage Agencies (AMSA), Washington D.C. July 2002. "Mercury Source Control and Pollution Prevention Program Evaluation; Final Report." Archived 2019-02-13 at the Wayback Machine
  62. EPA. "Effluent Limitations Guidelines and Standards for the Dental Category; Final Rule." 2017-06-14. 82 FR 27154
  63. A Plain English Guide to the EPA Part 503 Biosolids Rule (Report). United States Environmental Protection Agency. September 1994. p. 29. EPA 832/R-93/003. Archived from the original on 2019-02-13. Retrieved 2019-02-13.
  64. New England Interstate Water Pollution Control Commission; et al. (2007-10-24). Northeast Regional Mercury Total Maximum Daily Load (PDF) (Report). Lowell, MA. Archived (PDF) from the original on 2022-01-19. Retrieved 2019-02-16.
  65. Minnesota Pollution Control Agency (2007-03-27). Minnesota Statewide Mercury Total Maximum Daily Load (PDF) (Report). St. Paul, MN. Archived (PDF) from the original on 2020-09-28. Retrieved 2019-02-16.
  66. "Fish and Shellfish Advisories and Safe Eating Guidelines". United States Environmental Protection Agency. 2018-12-14. Archived from the original on 2019-02-13. Retrieved 2019-02-13.
  67. "Historical Advisories Where You Live". United States Environmental Protection Agency. 2018-03-21. Archived from the original on 2019-02-13. Retrieved 2019-02-13.
  68. Michael Best & Friedrich, LLP (25 February 2011). "EPA Issues Final Boiler MACT Rules". The National Law Review . Retrieved 2011-08-15.
  69. Hair, Corbin (18 December 2011). "Mercury Falling: Groundbreaking Power Plant Emissions Rule Imminent". The National Law Review. Archived from the original on 2012-01-08. Retrieved 2011-12-21.
  70. U.S. Environmental Protection Agency National Recommended Water Quality Criteria - Aquatic Life Criteria Table (1995) Archived 2015-12-05 at the Wayback Machine . Retrieved on 2015-12-30.
  71. U.S. Environmental Protection Agency. National Recommended Water Quality Criteria - Human Health Criteria Table. Retrieved on 2015-12-29.
  72. United Nations Economic Commission for Europe. Convention on Long-range Transboundary Air Pollution Archived 2007-12-13 at the Wayback Machine . Retrieved 2011-04-07
  73. United Nations Economic Commission for Europe. The 1998 Aarhus Protocol on Heavy Metals. Retrieved 2011-04-07
  74. EWaste. (2010). The Basel Convention – Combating the illegal trafficking of hazardous waste Archived 2011-02-24 at the Wayback Machine . Retrieved on 2011-04-07
  75. IISD.org. Introduction to the Rotterdam PIC Convention Archived 2011-11-08 at the Wayback Machine . Retrieved on 2011-04-07
  76. United Nations Environment Programme. The Negotiating Process Archived 2011-02-23 at Archive-It . Retrieved on 2011-04-07
  77. United Nations Environment Programme. Reducing Mercury in Artisanal and Small-Scale Gold Mining Archived 2013-04-16 at archive.today . Retrieved on 2011-04-07.
  78. United Nations Environment Programme. Mercury Control from Coal Combustion Archived 2013-04-16 at archive.today . Retrieved on 2011-04-07.
  79. United Nations Environment Programme. Mercury Reduction in the Chlor-alkali Sector Archived 2013-04-16 at archive.today . Retrieved on 2011-04-07.
  80. United Nations Environment Programme. Mercury in Products Archived 2012-09-15 at archive.today . Retrieved on 2011-04-07.
  81. United Nations Environment Programme. Mercury Air Transport and Fate Research Archived 2011-01-25 at the Wayback Machine . Retrieved on 2011-04-07.
  82. United Nations Environment Programme. Waste management Archived 2013-04-16 at archive.today . Retrieved on 2011-04-07.
  83. United Nations Environment Programme. Supply and Storage Archived 2012-09-18 at archive.today . Retrieved on 2011-04-07.
  84. United Nations Environment Programme. Toolkit for Identification and Quantification of Mercury Releases Archived 2011-04-23 at the Wayback Machine . Retrieved on 2011-04-07.