Merkel Mark II

Last updated

Mark II
Role Homebuilt aircraft
National origin United States
Manufacturer Merkel Airplane Company
DesignerEdwin Merkel
StatusPlans no longer available

The Merkel Mark II is an American homebuilt aerobatic biplane that was designed by Edwin Merkel and produced by the Merkel Airplane Company of Wichita, Kansas in the form of plans for amateur construction. [1]

Contents

Designer Merkel died on 12 March 2012 and plans are no longer available. [2]

Design and development

The Mark II features a two-seats-in-tandem open cockpit with an optional bubble canopy, fixed conventional landing gear and a single engine in tractor configuration. The Mark II was intended as a two-seat trainer version as a companion to a planned single-seat competition version. [1]

The aircraft is made from welded steel tubing with the airframe covered in sheet aluminum. Its 25.5 ft (7.8 m) span wings employ a NACA 23012 airfoil and each has a single torsional spar. The standard engine recommended was a 220 hp (164 kW) Franklin Engine Company powerplant. [1] [3]

The aircraft has an empty weight of 1,200 lb (540 kg) and a gross weight of 1,540 lb (700 kg), giving a useful load of 340 lb (150 kg). With full fuel of 18 U.S. gallons (68 L; 15 imp gal) the payload is 232 lb (105 kg). [1]

Specifications (Mark II)

Data from Plane and Pilot [1]

General characteristics

Performance

Related Research Articles

Auster J/4

The Auster J/4 was a 1940s British single-engined two-seat high-wing touring monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire.

Auster Workmaster agricultural monoplane

The Auster J/1U Workmaster is a late 1950s British single-engined single-seat high-wing agricultural monoplane built by Auster Aircraft Limited at Rearsby, Leicestershire. Of traditional high-wing layout, it carries 90 gallons of spray fluid in a tank beside the pilot, an extra seat being provided for a passenger. The Lycoming 0-360-A engine of 180 h.p. driving a McCauley v.p. propeller giving it ample power; and slotted ailerons and balanced tail controls providing good handling. Oversize tyres were fitted. Take-off run at 2,550 lb gross weight and cruising speed at 65 per cent power are respectively 180 yd and 88 miles per hour (142 km/h). Britten-Norman spray gear was provided by Crop Culture, and this company ordered nine Workmasters.

The Aquaflight Aqua I, also known as the W-6 was a 6-seat amphibious aircraft developed in the United States shortly after World War II.

Found Centennial 100 Canadian light aircraft

The Found Centennial 100 is a Canadian six-seat cabin monoplane produced by Found Brothers Aviation.

HAL HT-2

The HAL HT-2 is an Indian two-seat primary trainer designed and built by Hindustan Aeronautics Limited (HAL). The HT-2 was the first company design to enter production in 1953 for the Indian Air Force and Navy, where it replaced the de Havilland Tiger Moth. The HT-2 is a low-wing cantilever monoplane with a fixed tailwheel landing gear. Powered by a 155 hp (116 kW) Cirrus Major III piston engine, the aircraft has enclosed tandem cockpits with dual controls. Apart from military use, the aircraft was also used by Indian flying schools.

Team Tango Foxtrot American homebuilt aircraft

The Team Tango Foxtrot, or Foxtrot 4, is an American amateur-built aircraft, designed and produced by Team Tango of Williston, Florida. The aircraft is supplied as a kit for amateur construction, with or without factory builder assistance.

Vertical Hummingbird American helicopter

The Vertical Hummingbird is an American helicopter, produced by Vertical Aviation Technologies of Sanford, Florida that was introduced in 1991. The aircraft is supplied as a kit for amateur construction.

The Harmon Der Donnerschlag is an American homebuilt aircraft that was designed and produced by Harmon Engineering of Howe, Texas. The aircraft was intended for amateur construction.

Speedtwin E2E Comet 1

The Speedtwin E2E Comet 1, originally named the Phillips ST1 Speedtwin, is a two-seat, twin engined aircraft designed in the UK to be capable of aerobatics and the only civil twin certified for intentional spinning. After a long development time, just two have been built.

Williams W-17 Stinger American homebuilt aircraft

The Williams W-17 Stinger is an American homebuilt racing aircraft that was designed for Formula One Air Racing by Art Williams and produced by his company, Williams Aircraft Design of Northridge, California, introduced in 1971. The aircraft was at one time available in the form of plans for amateur construction, but only one was ever constructed.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The Bagalini Bagalini is an Italian homebuilt ultralight aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.

The CEI Free Spirit Mk II, also called the Cabrinha Free Spirit Mark II and the Cabrinha Model 423, is a three-seat American homebuilt aircraft that was designed by Richard Cabrinha and produced by CEI of Auburn, California, introduced at AirVenture in 1995. The aircraft was intended to be supplied as a kit for amateur construction, but only prototypes seem to have been completed.

The Historical PZL P.11c is an American homebuilt aircraft that was designed and produced by Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 66% scale replica of the Polish PZL P.11c fighter and when it was available was supplied as a kit for amateur construction.

The Storm 320E, sometimes written Storm 320 E, is an Italian microlight aircraft that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.

Aero Designs Pulsar American homebuilt airplane

The Aero Designs Pulsar is an American two-seat, low wing, ultralight and homebuilt aircraft that was designed by Mark Brown and first produced by Aero Designs of San Antonio, Texas, introduced in 1985. When it was available the Pulsar was supplied as a ready-to-fly aircraft and as a kitplane for amateur construction.

The Starfire Firebolt, sometimes called the Starfire Firebolt Convertible, due to its removable canopy, is an American homebuilt aerobatic biplane that was designed by G. H. "Mac" McKenzie and produced by Starfire Aviation of Tempe, Arizona. When it was available the aircraft was supplied in the form of plans for amateur construction, with some pre-fabricated parts available.

Tri-R KIS TR-1 American homebuilt aircraft

The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.

The Windspire Aeros is an American helicopter that was designed and produced by Windspire Inc. of Long Green, Maryland. Now out of production, when it was available the aircraft was supplied in the form of plans for amateur construction.

The Rotorschmiede VA115 is a German helicopter, designed and produced by Rotorschmiede GmbH of Munich, introduced at the AERO Friedrichshafen airshow in 2015. The aircraft is supplied complete and ready-to-fly.

References

  1. 1 2 3 4 5 Plane and Pilot: 1978 Aircraft Directory, page 147. Werner & Werner Corp, Santa Monica CA, 1977. ISBN   0-918312-00-0
  2. Baker Funeral Home (March 2012). "Obituary For Edwin Merkel" . Retrieved October 12, 2013.
  3. Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on August 6, 2013. Retrieved October 25, 2013.