Neutron | |
---|---|
Manufacturer | Behringer |
Technical specifications | |
Polyphony | monophonic (with paraphonic mode) |
Oscillator | two VCOs |
LFO | LFO with five waveforms |
Synthesis type | analog subtractive |
Filter | multi-mode VCF |
Effects | delay and overdrive |
Input/output | |
External control | MIDI and CV |
The Neutron is a dual-oscillator monophonic synthesizer manufactured by Behringer. Released in 2018, the Neutron has an analogue signal path and uses subtractive synthesis to produce sounds. It is semi-modular and compatible with Eurorack voltages.
The Neutron was announced in January 2018 [1] and was received well by critics. [2] Priced around £300, a relatively low price point for analogue synthesizers, critics highlighted how the Neutron packs in a lot of features for its cost. [3] The Neutron's original design was seen as a surprising due to Behringer's habit of cloning vintage synthesizers. [4] However, criticism was made of the delay circuit, which bled into the signal path when muted. [3]
The Neutron was designed in the United Kingdom by engineers at Midas. [5] It has a red faceplate and can be used as a desktop unit or taken out its casing to be used as a Eurorack module. [3]
The synthesizer has two oscillators based on the Curtis CEM3340, [3] which powered popular synthesizers such as the Roland SH-101 and Sequential Circuits Prophet 5. [6] Each chip has five blendable waveforms: sine, triangle, sawtooth, square and "tone mod", a waveshaping oscillator. There is oscillator sync, PWM and a noise source. A mix knob blends the mixture of both oscillators. External sounds can be run through the signal chain. The oscillator range can be changed using the "range" button. The full range of the oscillators is +/-10 octaves. The Neutron has a paraphonic mode to assign each oscillator to a separate note. There is "poly-chaining" functionality, letting you link multiple units together to play polyphonically. [3]
Neutron has a two-pole multimode 12 dB/octave filter with resonance control. [5] It has low-pass, band-pass and high-pass modes (using the patchbay, other filter shapes can be created). The filter can self-oscillate and has key-tracking. [3]
There are several modulation sources on Neutron, including an LFO, two envelopes and sample and hold. [3] The LFO is bi-polar and has five blendable waveshapes: sine, triangle, sawtooth, square and ramp (reverse sawtooth). [5] It can reach rates of 10 kHz for audio rate modulation. Neutron's two envelopes are ADSR. The Neutron also has a slew limiter and two attenuators. [3]
In terms of effects, the Neutron has a bucket-brigade delay chip with control over time, mix and feedback. [1] [2] It also has an overdrive section with control over drive, level and tone. [3] The Neutron's patchbay allows reconfiguration of the original signal path. It has 56 patch points in total, 32 inputs and 24 outputs. [1]
The Neutron's firmware was updated in December 2018. The 2.0 update added keyboard splits, glide, pitch bend levels and other functions. [7]
In March 2022, Behringer announced the Proton. Similar to the Neutron, the Proton has the same oscillator section as the Neutron. However, the Proton includes substantially more modules, including two looping ASR envelopes, two LFOs (one more than the Neutron), another filter, a waveshaper and sub-oscillators. The Proton will have 64 patch points, eight more than the Neutron. [8] [9]
Modular synthesizers are synthesizers composed of separate modules for different functions. The modules can be connected together by the user to create a patch. The outputs from the modules may include audio signals, analog control voltages, or digital signals for logic or timing conditions. Typical modules are voltage-controlled oscillators, voltage-controlled filters, voltage-controlled amplifiers and envelope generators.
CV/gate is an analog method of controlling synthesizers, drum machines, and similar equipment with external sequencers. The control voltage typically controls pitch and the gate signal controls note on-off.
Low-frequency oscillation (LFO) is an electronic frequency that is usually below 20 Hz and creates a rhythmic pulse or sweep. This is used to modulate musical equipment such as synthesizers to create audio effects such as vibrato, tremolo and phasing.
The Realistic Concertmate MG-1 is an analog synthesizer manufactured by Moog Music in 1981 and sold by Radio Shack from 1982 to 1983 under their "Realistic" brand name. It was produced without some standard Moog features, such as pitch and modulation wheels, as a cost-cutting measure aimed at achieving a lower price for the consumer market. The synthesizer also featured a pair of pass-through RCA jacks, which allowed users to mix radio or records into the final live synthesized sound output.
The Moog synthesizer is a modular synthesizer invented by the American engineer Robert Moog in 1964. Moog's company, R. A. Moog Co., produced numerous models from 1965 to 1981, and again from 2014. It was the first commercial synthesizer and established the analog synthesizer concept.
The Moog Sonic Six is a duophonic analog synthesizer that was manufactured by Moog Music from 1972 to 1979. Because of its portable design and built-in speaker, the Sonic Six was widely used for lectures and educational purposes, often by Bob Moog himself.
The Oberheim OB•12 is a Virtual Analog synthesizer, designed and realised by the Italian musical instrument manufacturer Viscount, in production between 2000 and 2005.
The Siel DK70 is a synthesizer produced in 1986 by Siel.
A synthesizer is an electronic musical instrument that generates audio signals. Synthesizers typically create sounds by generating waveforms through methods including subtractive synthesis, additive synthesis and frequency modulation synthesis. These sounds may be altered by components such as filters, which cut or boost frequencies; envelopes, which control articulation, or how notes begin and end; and low-frequency oscillators, which modulate parameters such as pitch, volume, or filter characteristics affecting timbre. Synthesizers are typically played with keyboards or controlled by sequencers, software or other instruments and may be synchronized to other equipment via MIDI.
The Roland System-100M was a modular analog synthesizer manufactured by the Roland Corporation in the late 1970s and early 1980s. It was the successor of the Roland System-100, a semi-modular keyboard.
The Korg Mono/Poly (MP-4) is a 44 key "mono-polyphonic" analog synthesizer manufactured by Korg from 1981 to 1984. This keyboard is the sister synthesizer to the Korg Polysix. It has four highly stable voltage-controlled oscillators (VCOs), a 4-pole, self-oscillating low pass filter (LPF), wide modulation capabilities and pseudo-polyphony (paraphony).
The Korg PS-3300 is a polyphonic analog synthesizer, produced by Korg between 1977 and 1981.
The AX80 is a polyphonic analogue keyboard synthesizer manufactured by Akai Professional in 1984. It was Akai's first venture into the professional electronic musical instrument market. The AX80 used digitally controlled oscillators (DCO) and filter circuitry based on the Curtis Electronics CEM 3372 integrated circuit. It was marketed as part of a line of project studio equipment called the Akai Music Studio System, which included the S612 digital sampler the MR16 drum machine, the MS08 sequencer, and the MG1212 multitrack tape recorder, at a price of $1,695 US.
The Steiner-Parker Synthacon is a monophonic analog synthesizer that was built between 1975 and 1979 by Steiner-Parker, a Salt Lake City-based synthesizer manufacturer. It was introduced as a competitor to other analog synthesizers, like the Minimoog and ARP Odyssey.
The AX60 is a polyphonic analogue keyboard synthesizer manufactured by Akai Professional in the mid-1980s. It was Akai's answer to the popular Roland Juno series synthesizers. The AX60 uses voltage-controlled analogue oscillators and filter circuitry based on the Curtis Electronics CEM 3394 integrated circuit.
The CZ series is a family of low-cost phase distortion synthesizers produced by Casio in the mid-1980s. Eight models of CZ synthesizers were released: the CZ-101, CZ-230S, CZ-1000, CZ-2000S, CZ-2600S, CZ-3000, CZ-5000, and the CZ-1. Additionally, the home-keyboard model CT-6500 used 48 phase distortion presets from the CZ line. The CZ synthesizers' price at the time of their introduction made programmable synthesizers affordable enough to be purchased by garage bands. Yamaha soon introduced their own low-cost digital synthesizers, including the DX-21 (1985) and Yamaha DX100, in light of the CZ series' success.
The Arturia MiniBrute is a synthesizer manufactured by Arturia. Although the MiniBrute was the first piece of analog hardware created by Arturia—which had previously exclusively marketed software synthesizers—it generated strong sales.
The Grandmother is an analog semi-modular subtractive, 32-key synthesizer released by Moog Music Inc., incorporating circuits based on the Moog modular synthesizer Model 15 and the Minimoog.
The Volca Modular is an analogue synthesizer manufactured by the Japanese music technology company Korg. It is part of their popular Volca series of affordable electronic synthesizers and drum machines. Like other Volcas, it sports a 16-step sequencer and can be powered by batteries.
The Volca Keys is a subtractive analogue synthesizer manufactured by the Japanese music technology company Korg. It was released in April 2013 and was at the time one of the only affordable analogue synthesizers on the market. The synthesizer is three-note paraphonic, meaning that it can play chords with all voices sharing the single voltage-controlled filter (VCF).