Newark Assembly

Last updated
Chrysler Newark Assembly
DaimlerChrysler Newark Assembly Delaware Office.jpg
Closed Office Building (April 2009)
Newark Assembly
Built1951
Location Newark, Delaware
Coordinates Coordinates: 39°39′50″N75°45′40″W / 39.664°N 75.761°W / 39.664; -75.761
Industry Automotive
Employees2,115 in 2005 [1]
Area272 acres (110.1 ha)
Defunct2008

Newark Assembly was a Chrysler (DaimlerChrysler from 1998-2008) factory in Newark, Delaware built in 1951 to make tanks and later automobiles with production continuing until December 2008. [1]

Contents

A variety of Chrysler, Dodge, and Plymouth models were produced at this facility over the years, totaling nearly 7 million cars.

History

Chrysler bought the facility in 1938 to use as a parts depot. [2]

Construction began in January 1951 for a plant to produce tanks with the first M48 Patton driven to Army Ordnance on April 11, 1952. [3] 11,703 M48s were built at the plant between opening and 1959. [4] A five-year phase-out after the Korean War brought the facility and tank production to an end by 1961. [2] The plant also produced M103 heavy tanks. [5]

The facility was used for the production of Plymouth and Dodge automobiles starting in 1957. By 1961, construction began on a 1.5 million square foot Plymouth plant where the Chrysler A platform was used to build Dodge and Plymouth compacts. [2]

During the 1990s, a recycling initiative was implemented to reduce the factory's environmental impact as well as to improve the facility's reputation. This was the result of several fires and air pollution from the plant, for which the Environmental Protection Agency fined the automaker. [6]

To prepare the Newark plant for the production of the 1997 Dodge Durango, a sport utility vehicle (SUV) the company invested US$623 million that included a new training facility, production simulation building, a paint shop, as well as upgrades to the 1.2-mile (2 km) test track, a new material handling fleet, and new controls on the assembly line. [2]

On February 14, 2007, DaimlerChrysler announced that the plant would lose one working shift in 2007, and that it would be scheduled to be shut down completely in 2009. [7]

In October 2008, the company announced that the closure would be moved up to the end of 2008 citing a slowdown in both the economy and demand for large vehicles. [8] Production ended and the neighboring Mopar parts distribution center was also closed in 2008. [9] [2]

On October 24, 2009, The University of Delaware announced it had signed a deal to buy the 272-acre (1.10 km2; 0.425 sq mi) Chrysler facility for US$24.25 million. [10] The property is next to the university's south campus (the main campus is a 1/4-mile north and usually accessible by bus by students). Plans are to use it as a research and development site and for the future expansion of the university.

The history department at the University of Delaware and the Hugh M. Morris Library used a class of graduate and undergraduate students to conduct interviews of eleven former autoworkers employed at the Newark Assembly plant. [11]

The University has decommissioned the buildings with approximately 90% of the material on the site recycled. [12]

The location was developed then for the Science, Technology, and Advanced Research (STAR) campus. [13] In 2012, Bloom Energy, makers of the Bloom Energy Server held a groundbreaking for a new manufacturing plant at the former auto assembly site. [14] In 2014, the first tenant of a revitalized Chrysler building will be the College of Health Sciences and a health-related complex. [15]

On November 19, 2015, the Digital Infrastructure Management company SevOne announced its move to the STAR Campus [16]

Products

Facility viewed from Amtrak train (May 2010) Newark Assembly Facility grounds viewed from Amtrak.jpg
Facility viewed from Amtrak train (May 2010)
Notes:
  1. The J-body Chrysler LeBaron coupes and convertibles were produced in St. Louis Assembly from 1987 to 1991. For 1992, production was shifted to Newark until production ended in 1993 for the coupe and 1995 for the convertible.
  2. Dodge Intrepids and Chrysler Concordes were only built in Newark Assembly from 1994 to 1996. During those years, Newark was an overflow plant for Brampton Assembly.

See also

Related Research Articles

<span class="mw-page-title-main">Chrysler</span> Automotive brand and North American subsidiary of Stellantis

Stellantis North America ) is one of the "Big Three" automobile manufacturers in the United States, headquartered in Auburn Hills, Michigan. It is the American subsidiary of the multinational automotive company Stellantis. In addition to the Chrysler brand, Stellantis North America sells vehicles worldwide under the Dodge, Jeep, and Ram nameplates. It also includes Mopar, its automotive parts and accessories division, and SRT, its performance automobile division.

Dodge is an American brand of automobiles and a division of Stellantis, based in Auburn Hills, Michigan. Dodge vehicles have historically included performance cars, and for much of its existence Dodge was Chrysler's mid-priced brand above Plymouth.

<span class="mw-page-title-main">Plymouth (automobile)</span> Defunct American automobile brand

Plymouth was a brand of automobiles produced by Chrysler Corporation and its successor DaimlerChrysler. The brand was launched in 1928 to compete in what was then described as the "low-priced" market segment that was dominated by Chevrolet and Ford. It became a high-volume seller for the automaker until the late 1990s. Plymouth cars were marketed primarily in the United States. The brand was withdrawn from the marketplace in 2001. The Plymouth models that were produced up to then were either discontinued or rebranded as Chrysler or Dodge.

<span class="mw-page-title-main">Plymouth Reliant</span> Motor vehicle

The Plymouth Reliant and Dodge Aries are mid size cars introduced for model year 1981 as the first "K-cars" manufactured and marketed by the Chrysler Corporation. The Reliant and Aries were the smallest cars to have the traditional 6 passenger 2 bench seat with column shifter seating arrangement favored by customers in the United States, similar to larger rear-wheel drive cars such as the Dodge Dart and other front-wheel drive cars such as the Chevrolet Celebrity. The Reliant was powered by a then-new 2.2 L I4 SOHC engine, with a Mitsubishi "Silent Shaft" 2.6 L as an option. The Reliant was available as a 2-door coupe, 4-door sedan, or as a 4-door station wagon, in three different trim lines: base, Custom and SE. Station wagons came only in Custom or SE trim.

<span class="mw-page-title-main">Chrysler M platform</span> Motor vehicle platform

The Chrysler M Platform was an intermediate-sized automobile platform used by Chrysler motors from 1977 to 1989. It was a successor to the F-body, as used on the Dodge Aspen/ Plymouth Volare. The M-body was also the successor to the short-lived R-body, as the Chrysler New Yorker and Plymouth Gran Fury moved to it following the R-body's demise in 1981. The M platform was the final production passenger car with a solid rear axle mounted on Hotchkiss-style, parallel semi-elliptical leaf springs sold in the U.S.

<span class="mw-page-title-main">Dodge Durango</span> American mid-size SUV

The Dodge Durango is a mid-size sport utility vehicle produced by Dodge in three generations starting with the 1998 model year. The first two generations were very similar in that both were based on the Dodge Dakota and Ram Pickup, both featured a body-on-frame construction and both were produced at the Newark Assembly Plant in Newark, Delaware through the 2009 model year.

The GS platform is a compact car platform co-developed and shared by Mitsubishi Motors and DaimlerChrysler.

<span class="mw-page-title-main">Dodge Super Bee</span> Motor vehicle

The Dodge Super Bee is a mid-sized muscle car marketed by Dodge, that was produced for the 1968 through 1971 model years.

<span class="mw-page-title-main">Chrysler Hemi engine</span> Series of I6 and V8 engines built by Chrysler

The Chrysler Hemi engines, known by the trademark Hemi, are a series of American V8 gasoline engines built by Chrysler with overhead valve hemispherical combustion chambers. Three different types of Hemi engines have been built by Chrysler for automobiles: the first from 1951 to 1958, the second from 1964 to 1971, and the third beginning in 2003. Although Chrysler is most identified with the use of "Hemi" as a marketing term, many other auto manufacturers have incorporated similar designs. The engine block and cylinder heads were cast and manufactured at Indianapolis Foundry.

The Belvidere Assembly Plant (BVAP) is an automobile production facility owned and operated by Stellantis North America. The factory opened in 1965 in Belvidere, Illinois, United States, and assembles the Jeep Cherokee until 2023.

Jefferson North Assembly Plant (JNAP) is a Stellantis North America automobile assembly factory in Detroit, Michigan. Located on East Jefferson Avenue 6 mi (9.6 km) from downtown, near Grosse Pointe Park, the factory opened in 1991 as a major commitment to the downtown Detroit area by Chrysler, and was expanded in 1999, bringing its area to 2,700,000 sq ft (250,000 m2) and expanded again in 2011, bringing its total to 3,000,000 sq ft (280,000 m2). Its first product was the Jeep Grand Cherokee from the start, which it continues to produce to this day. It uses the original site of the former multi-story Chrysler Kercheval Body Plant, a noted Detroit landmark for a series of large advertising signs on the roof, plus the Hudson Motor Company location that was originally built during the 1940s as a storage lot for newly manufactured vehicles to the east of the facility. The Kercheval Plant was imploded, and video of the demolition was used in a Chrysler Corp. commercial with Lee Iacocca using the new plant as evidence of the company's investment in new product.

Saint Louis Assembly was a Chrysler automobile factory in Fenton, Missouri. The "South" plant opened in 1959, while the "North" portion opened in 1966. The Saint Louis Factory was built to accommodate Chrysler's new Chrysler B platform allowing the company to build subcompact vehicles. Saint Louis North was the home of minivan production from 1987 through 1995, when it was converted to build the Dodge Ram pickup truck. Minivan production was switched to the South plant in 1995 and continued there through the 2007 model year.

The Sterling Heights Assembly Plant, is a 5,000,000 sq ft (460,000 m2) automotive manufacturing factory in Sterling Heights, Michigan currently operated by Stellantis North America.

Toluca Car Assembly is a 220-acre (89 ha) Chrysler automobile factory in Toluca, State of Mexico, Mexico. It opened in 1968. Toluca Stamping is located nearby.

<span class="mw-page-title-main">Chrysler SOHC V6 engine</span> Motor vehicle engine

The single overhead cam V6 engine introduced in 1993 was a major advancement for Chrysler. It was derived from Chrysler's first homegrown front-wheel drive V6, the Chrysler 3.3 engine. The SOHC V6 has been replaced by the Chrysler Pentastar engine.

<span class="mw-page-title-main">Dodge Intrepid</span> Motor vehicle

The Dodge Intrepid is a full sized front-wheel drive four-door sedan that was produced by Dodge for model years 1993 to 2004. It is related to the Chrysler 300M, Chrysler Concorde, Chrysler LHS, Chrysler New Yorker, and Eagle Vision which were all built on Chrysler's new "cab forward" LH platform.

<span class="mw-page-title-main">Plymouth Cranbrook</span> Motor vehicle

The Plymouth Cranbrook is an automobile which was built by Plymouth for the model years 1951 through 1953. It replaced the Special Deluxe when Plymouth changed its naming scheme and was essentially the same as the Plymouth Concord and Cambridge. In period TV commercials, the cars were all introduced as "the new Plymouth" then followed by the model year, and made no mention of the nameplate, which was used to describe the trim package, standard and optional features that were included. The Cranbrook model name was however featured in contemporary sales brochures.

<span class="mw-page-title-main">History of Chrysler</span> Aspect of history

The history of Chrysler involves engineering innovations, high finance, wide alternations of profits and losses, various mergers and acquisitions, and multinationalization. Chrysler, a large automobile manufacturer, was founded in the 1920s and continues under the name Stellantis North America.

Lynch Road Assembly was a Chrysler assembly plant located in Detroit, Michigan near Coleman A. Young International Airport. It is now the location of The Crown Group, a powdered coatings manufacturer which supports the automotive manufacturing industry.

<span class="mw-page-title-main">Monteverdi Sierra</span> Motor vehicle

The Monteverdi Sierra is a Swiss luxury car produced by Monteverdi based on the underpinnings of the Dodge Aspen and Plymouth Volare. From 1977 to 1980, around 20 cars were built.

References

  1. 1 2 "Chrysler plant history". UDaily. 16 March 2012. Retrieved 6 July 2021.
  2. 1 2 3 4 5 Mize, Thomas. "Chrysler's Newark Plant (Delaware), 1951-2008 (Tanks to Aspens)". allpar.com. Retrieved 1 July 2020.
  3. "Chrysler Delaware Tank Plant". pencaderheritage.org. Retrieved 1 July 2020.
  4. "Too Late for the War: The U.S. Industrial Base and Tank Production 1950-1953" 3tkprod97.pdf (ciar.org)
  5. Palmer, C. B. (1952-04-27). "Fifty-Ton Monsters With a Mighty Punch; Our first really heavy tank, which mounts the largest gun ever, is unique building job". The New York Times. ISSN   0362-4331 . Retrieved 2022-08-18.
  6. Hargreaves, Gregory (25 February 2014). "Building Community: The Chrysler Newark Assembly Plant". Disposable America. Retrieved 6 July 2021.
  7. "Chrysler Group Recovery and Transformation Plan Seeks Return to Profitability, Redesigns Business Model" (Press release). Daimler AG. 14 February 2007. Archived from the original on 14 February 2012. Retrieved 15 July 2013.
  8. "Chrysler cutting 1,825 jobs with moves at 2 plants". mlive.com. Associated Press. 23 October 2008. Retrieved 15 July 2013.
  9. Simmons, Karie (4 November 2015). "Former Chrysler workers remember site's past, celebrate its future". Newark Post. Retrieved 6 July 2021.
  10. Bunkley, Nick (26 October 2009). "Fisker to Make Plug-in Hybrids at Former G.M. Plant". The New York Times. Retrieved 15 July 2013.
  11. "Chrysler Corporation Newark Assembly Plant oral history collection". University of Delaware Library. 2011. Retrieved 15 July 2013.
  12. "Chrysler Assembly Plant Decommissioning". AECOM. Retrieved 6 July 2021.
  13. "URS to decommission former Chrysler plant for science, technology campus" (Press release). University of Delaware. 16 August 2010. Retrieved 15 July 2013.
  14. "STAR in Bloom: University, state officials welcome Bloom Energy to UD's STAR Campus". University of Delaware. 30 April 2012. Retrieved 15 July 2013.
  15. "Health Sciences Complex – January 2014". University of Delaware. 2013. Retrieved 15 July 2013.
  16. "SevOne Opens Technology and Innovation Center on University of Delaware STAR Campus". SevOne. 2015. Retrieved 20 November 2015.
  17. Antill, Peter D. (7 March 2001). "M60 Patton Main Battle Tank (USA)". historyofwar.org. Retrieved 6 July 2021.
  18. Zatz, David. "Chrysler's Newark Plant (Delaware), 1951-2008: Tanks to..." allpar.com. Retrieved 6 July 2021.
  19. 1 2 3 Mize, Thomas. "Chrysler's Newark Plant (Delaware), 1951-2008 (Tanks to Aspens)". allpar.com. Retrieved 15 July 2013.
  20. Adler, Alan L. (18 November 1992). "Chrysler Gives Delaware Plant Reprieve With Intrepid Production" (Press release). Associated Press. Retrieved 15 July 2013.
  21. 1 2 Tadesse, Luladey B. (8 January 2007). "Del. leaders travel to Detroit to plea with Chrysler chief". Delaware News-Journal. Retrieved 15 July 2013.

Commons-logo.svg Media related to Newark Assembly at Wikimedia Commons