The Concorde's design can be traced to 1986 when designer Kevin Verduyn completed the initial exterior design of a new aerodynamic concept sedan called Navajo. The design never passed the clay model stage.[1] Also at this time, the Chrysler Corporation purchased bankrupt Italiansports car manufacturer Lamborghini. The Navajo's exterior design was reworked and became the Lamborghini Portofino, released as a concept at the 1987 Frankfurt Auto Show.[2] The Portofino was heralded as a design triumph, setting in motion Chrysler's decision to produce a production sedan with the Portofino's revolutionary exterior design, called "cab-forward". The cab forward design was characterized by the long, low slung windshield, and relatively short overhangs. The wheels were effectively pushed to the corners of the car, creating a much larger passenger cabin compared to equivalent contemporary cars.
Design of the future Concorde chassis began in the late 1980s after Chrysler had bought another automaker, American Motors Corporation (AMC) in 1987.[3] During this time, Chrysler began designing the replacement for the Dodge Dynasty and Chrysler New Yorker, as well as a potential Plymouth. The initial design of Dodge's LH bore resemblance to the Dynasty, and this design was scrapped entirely after François Castaing, formerly AMC's Vice President of product engineering and development, became Chrysler's Vice President of vehicle engineering in 1988.
The new design, under Castaing's leadership, began with the Eagle Premier, also sold later as the Dodge Monaco. The Premier's longitudinal engine mounting layout was inherited, as was the front suspension geometry, and parts of the braking system. The chassis itself became a flexible architecture capable of supporting front or rear-wheel drive (designated "LH" and "LX" respectively). The transmission was inspired by the Premier's Audi and ZF automatics. Borrowing heavily from Chrysler's A604 (41TE) "Ultradrive" transversely mounted automatic, it became the A606 (also known as 42LE). The chassis design was continually refined throughout the following years, as it underpinned more Chrysler prototypes: the 1989 Chrysler Millennium and the 1990 Eagle Optima.
By 1990, it was decided that the new technologically advanced car would need a new technologically advanced engine to power it. Until that time, the only engine confirmed for use was Chrysler's 3.3L pushrodV6 engine.[4] Chrysler's old engineering system would have required up to five years, but both the engine and manufacturing teams committed to "Job 1" to have a new 3.5L engine as "an absolute cornerstone for the car."[4] Under Castaing's leadership, Chrysler developed an advanced engine in three years for the start of Concorde production that featured SOHC cylinder heads with four valves per cylinder.
The appearance, still based on the cab forward exterior design of the 1987 Lamborghini Portofinoconcept, with its aerodynamic shape, made for little wind noise inside this large car. This sleek styling gives the Concorde a low drag coefficient which was ahead of its time. Although American Motors' Eagle Premier (and Dodge Monaco) was discontinued by Chrysler after the 1992 model year, the new Concorde's packaging was derived from the Premier, and all the suspension and drivetrain development mules were Premiers.[5] Other design features found their way into the Chrysler LH platform, most notably the longitudinal engine layout, a hallmark of Renault's front-wheel-drive designs.[6] This design allowed engineers to lower the hood line, made maintenance/servicing simpler, and tightened the car's turning diameter.
First generation featured full-width taillamp design
Out of all the LH sedans, the first generation Concorde was most closely related to the Eagle Vision. The Concorde was given a more traditional image than the Vision. The two shared nearly all sheet metal in common with the main differences limited to their grilles, rear fascias, bodyside moldings, and wheel choices. The Concorde featured a modern take on Chrysler's signature waterfall grille. It was split into six sections divided by body-colored strips with the Chrysler Pentastar logo on the center strip. The Concorde's rear fascia was highlighted by a full-width and full-height lightbar between the taillights, giving the appearance that the taillights stretched across the entire trunk.
In keeping with its upscale position, Concorde's body side moldings incorporated bright chrome (later golden colored) work not found on its Dodge or Eagle siblings. On Concordes with gray lower body paint color, the gray came all the way up to the chrome beltline; on Visions, the gray lower body paint area was smaller and much more subtle. Wheel styles, which included available aluminum wheels with a Spiralcast design, were also unique to the Chrysler LH sedans (Concorde, LHS, New Yorker); Dodge and Eagle had their own different wheel styles.
The similar Eagle Vision featured a smaller split-grille with a large Eagle badge in the center. The Vision's taillights, although the same shape as the Concorde's were clustered differently and featured European-inspired amber turn signals. The Vision did not share the Concorde's lightbar, instead of using the area as space for a trunk-mounted license plate (as opposed to the rear bumper-mounted license plate on the Concorde). On the other hand, the Intrepid incorporated different headlight and taillight assemblies and had no grille at all.
The interior of the Concorde was also nearly identical to that of the Vision, the main difference being the Concorde's faux wood trim and steering wheel emblem; the Intrepid's interior was substantially different from the Concorde and Vision. Concordes and Intrepids could be equipped with a front bench seat and column shifter, bringing total capacity to six. The Vision could only be equipped with front bucket seats. Unlike its Dodge and Eagle siblings, Chrysler Concordes never had the option of autostick transmission and its special instrument cluster. It was only available with an automatic transmission.
The upscale Concorde models featured leather-trimmed seats, steering wheels, shift knobs, and door inserts. Other interior options included rear-seat vents (in the five-seater), rear center rear armrest, and eight-way power seats for both the driver and passenger, as well as personal reading lamps. Power windows and central door locks were standard on all Concordes, as were dual airbags. Other options included remote keyless system and a choice of several Infinity sound systems with CD, cassette with up to eight speakers, and an equalizer.
The upscale LXi model was distinguishable as it did not have a retractable antenna, but a fixed antenna inside the rear passenger-side fender. Anti-lock brakes (ABS) were standard, with traction control optional.
Dual-way power sunroofs were available on this car. They were designed and installed by American Sunroof (now American Specialty Cars) from its Columbus, Ohio plant, not by Mopar itself. An installed sunroof eliminated most of the front overhead console that featured storage bins for a garage door opener and sunglasses. However, the Overhead Travel Information System (OTIS), or on-board computer with integrated map lights, was retained.
A notable achievement included the Center for Auto Safety ranking the 1993 Concorde as superior in crashworthiness after testing it at 35 miles per hour (56.3km/h) into a wall. Another achievement was being featured on Car and Driver's top 10 list for both 1993 and 1994.
Model year changes
1993
Base 3.3L engine had 153hp (114kW) and standard non-touring suspension. A six-disc trunk-mounted Mopar CD changer with wire remote and an alarm system were dealer-installed options. This was the first car, along with Intrepid and Vision, to have the 3.5L 24-valve SOHC V6 engine. A Panasonic cell phone with an externally mounted antenna could be ordered. The split-bench seat with column shift lever was not yet available, but planned from the beginning.
1994
For this year, the touring suspension became standard. Also, base engines gained 8hp (6kW). A front split-bench seat with twofold-down armrests with cup holders and column shift became available to make it a six-seater. Power steering added more assistance, to reduce turning effort for parking as well as deliver a greater feel at higher speeds. The 3.3L engine was rated at 153hp (114kW) for 1992 and 1993 and 161hp (120kW) in the remaining years of the first generation. Both 3.3L engines achieved 18mpg‑US (13L/100km; 22mpg‑imp) city, 21mpg‑US (11L/100km; 25mpg‑imp) combined, and 26mpg‑US (9.0L/100km; 31mpg‑imp) highway. Chrysler's Visorphone was offered as well as a more conventional dealer-installed Chrysler car phone and the same Panasonic cell phone from the 1992 launch, all shown in the 1994 model year brochure.
1995
Improvements made to the transaxle, a modification to the optional remote keyless entry system, and the addition of 'thumb-touch' acceleration and cancel features, placed on the steering wheel spokes, to the cruise control. Later 1995 models were produced with sheet metal front fenders, which replaced the composite fenders on earlier models to improve structural integrity. The corporate "Pentastar" logo was replaced by the Chrysler wreath on the grille, horn pad, and various other places (except the keyless entry key fob and keys, which still had the old "Pentastar" logo). Chrysler waited until 1995 for this change on its other models with the exception of the Cirrus and Sebring, with the Plymouth brand getting a related new logo on all 1996 and later models. Dodge had already begun phasing out the Pentastar in 1992.
1996
The Concorde gained two distinguished trim levels for 1996: lower-level LX and higher-level LXi. Extra sound insulation and revised structural engineering promised to make the Concorde quieter.[8] Sheet metal front fenders added for 1996 and later on all models as part of the structural upgrade.
The base model now has 16' wheels standard, better insulation, OBD-II, a new finish to the front seats and more powerful headlights.
Optional "gold" finish on the aluminum rims.
1997
The only major change for this year was that on the base LX model, the 3.3L V6 was dropped as the standard engine.
All of the first-generation 3.5L engines were rated at 214hp (160kW) with 16mpg‑US (15L/100km; 19mpg‑imp) city and 24mpg‑US (9.8L/100km; 29mpg‑imp) with 89 octane fuel required.
1998-2001 Chrysler Concorde Rear ViewFacelift (2002-2004)2002-2004 Chrysler Concorde Rear View
The Concorde was completely redesigned for the 1998 model year. The "Second Generation" design was introduced in 1996 as the Chrysler LHXconcept car. This concept vehicle had large, 20-inch wheels, a centrally located instrument cluster, and a closed-circuit television system within the windshield pillars replacing conventional rearview mirrors. While the concept vehicle's wheelbase was expanded to 124 inches (3,100mm) to allow for rear passenger supplement restraints, rear occupant entertainment center and storage compartment, production second generation LH cars retained the original's 113 inches (2,900mm) wheelbase.
Despite overall length increasing by 7.5 inches (190mm), the second generation's weight dropped by nearly a hundred pounds.[10] This was achieved by extensive use of aluminum for the rear suspension, hood, as well as in the two new engines. There was a new 200hp (149kW)2.7-liter V6 and 225hp (168kW)3.2L V6.[10] The 3.5L was redone and output upgraded to 253hp (189kW) and was available on the 2002 through 2004 Concorde Limited (formerly LHS).
Much was done in the design process to make the second generation LH sedans look more distinct from each other. The 1998 Concorde differed far greater from the Dodge Intrepid and the new 1999 Chrysler 300M (successor to the Eagle Vision), than did the first generation models. With the exception of the doors and roof, the Concorde shared little sheet metal with the Intrepid and 300M. The new Concorde's front end was underscored by a striking full-width grille, relocated to the front bumper to give the impression of a bottom breather. Sweeping curves and a more rounded front end also set the Concorde apart from the Intrepid and 300M.
As in the previous generation, six-passenger seating with a front bench seat, folding center armrest, and a column-mounted transmission shifter was available on the base model through the 2004 model year.[11] Cloth seating was standard on base LX with leather seating optional. Leather was standard on upscale LXi and later Limited models.
The Concorde, 300M, and Intrepid were discontinued in 2004. The all-new, rear-wheel-drive Chrysler 300 replaced the Concorde (and 300M) in early 2004 as a 2005 model.
Model year changes
1998: The Concorde was completely redesigned for the 1998 model year. Bodyshells were designed to be stronger and stiffer, as well as incorporating double-shear suspension mounts and integrated side impact protection.[5]
1999: The Concorde's suspension system was softened to enhance ride comfort and reduce road noise. Thicker carpeting was installed inside, and a new standard cargo net went into the trunk. LXi models added a new CD player and Chrysler's Sentry Key theft-deterrent system, which disabled the ignition unless the proper key was used to start the engine.
2000: A new factory-installed power sunroof was available on both base LX and upscale LXi models. The Concorde also earned additional suspension changes designed to provide a quieter, smoother ride. Tires grew to 16 inches for the LX, to match those of the LXi. The LXi edition gained standard speed-sensitive, variable-assist steering, as well as an optional 4-disc in-dash CD changer.
2001: Optional front side airbags and a 3-point safety belt for the rear seat's middle position were added. The LX's 22D option package now included alloy wheels. Also, the LXi's optional Infinity sound system gained steering wheel-mounted controls.
2002: Adopting the body of the discontinued LHS, a new trim level was added, the range-topping Limited, which featured 17-inch wheels and a "high output" 3.5L V6 engine producing 250hp (186kW). With the former LHS's shorter nose, the 2002–2004 Concorde was 1.4in (36mm) shorter than 1998–2001 models.[12] At midyear, Limited models became available with an optional Pro-Am Edition Group that included two-tone leather upholstery, unique interior trim, full-size spare tire on a matching chrome road wheel, a set of TaylorMade golf clubs (irons only), a special leather and suede Chrysler golf bag, exterior 'Pro-Am' appliques on the exterior rear windows, as well as a 'Pro-Am' trunk organizer for holding the clubs and accessories.
2003: No major changes were made except the optional 4-disc in-dash CD changer was replaced with the optional 6-disc in-dash CD changer.
2004: The Concorde's last year. For the 2005 model year, the Concorde was replaced by the Chrysler 300. The last Concorde was produced on August 30, 2003.
Related Research Articles
Eagle was a brand of the Chrysler Corporation following the purchase of American Motors Corporation (AMC) in 1987 and marketed through the end of the 1998 model year. It was aimed at the enthusiast driver and promoted as more "European" than the automaker's similar models.
The Chrysler Cirrus is a mid-sized 4-door notchback sedan introduced by Chrysler motors for the 1995 model year. Built on the Chrysler JA platform, the 4-door notchback sedan joined Chrysler's roster of "Cloud Car" models drawing their names from meteorological terms, including the mid-priced Dodge Stratus it was based on introduced at the same time, and the low-priced Plymouth Breeze variant a year later.
The Chrysler New Yorker is an automobile model produced by Chrysler from 1940 until 1996, serving for several decades as either the brand's flagship model or as a junior sedan to the Chrysler Imperial, the latter during the years in which the Imperial name was used within the Chrysler lineup rather than as a standalone brand.
The LH platform served as the basis for the Chrysler Concorde, Chrysler LHS, Chrysler 300M, Dodge Intrepid, Eagle Vision, and the final Chrysler New Yorker. A Plymouth to be called the "Accolade" was planned, but never saw production. The platform pioneered Chrysler's "cab-forward" design; featured on some Chrysler, Dodge, and Eagle cars in the 1990s and early 2000s.
The Eagle Summit is a line of subcompact cars produced for two generations by Mitsubishi and sold by Eagle from 1989 until 1996. It was marketed as a captive import by the Jeep-Eagle sales division that was established after Chrysler Corporation purchased American Motors Corporation (AMC) in 1987.
The Eagle Vision is a full-sized, front-wheel drive four-door sports sedan produced from 1992 until 1997. It was marketed by Eagle, replacing the AMC/Renault-designed Eagle Premier. The Eagle Vision was badged as the Chrysler Vision in Europe. The Vision debuted at the 1992 North American International Auto Show in Detroit. As one of the LH sedans, it was Automobile Magazine's Automobile of the Year in 1993, and ultimately the only Eagle model to be completely designed and built in-house by Chrysler.
The Eagle Premier is a full-size executive car that was developed by American Motors Corporation (AMC) during the 1980s through its partnership with Renault. This model was manufactured in the then-brand-new Brampton Assembly in Canada. Chrysler Corporation bought the rights to the Premier when it acquired Renault's outstanding shares in AMC in 1987, and began selling the car under the new Eagle marque.
The Chrysler 300M is a full-size luxury car that was produced by Daimler/Chrysler from 1999 to 2004. It is a front-wheel drive, 255 hp V6 engined car using the Chrysler LH platform. Versus its platform mates, the 300M was roughly 10 inches (25 cm) shorter to make it more easily exportable to Europe. Priced above the Concorde and identically to the LHS, the 300M shared Chrysler's flagship position with the LHS until the LHS's discontinuation after 2001, upon which it became Chrysler's sole flagship model.
The Dodge Stratus is a mid-size car that was introduced by Dodge in December 1994 and was based on the 4-door sedan Chrysler JA platform. The Stratus, Plymouth Breeze, and Chrysler Cirrus were all on Car and Driver magazine's Ten Best list for 1996 and 1997. It received critical acclaim at launch, but ratings fell over time. An updated version of the Stratus was introduced for 2001, with the Cirrus being renamed as the Chrysler Sebring, and a coupé model was also added to the range. Production ended in early 2006 at the Sterling Heights Assembly Plant after building 1,308,123 Stratus and Sebrings since 2000.
The LH engine was a series of V6 engines developed by Chrysler Corporation for its LH platform cars. It is a 60-degree V6 designed for front-wheel drive applications, later adapted to rear-wheel drive ones. The 2.7 liter LH engine is based on the SOHC 3.5 L engine, though bore spacing, cylinder bore, stroke, and assembly site are different.
The Chrysler Sebring is a line of mid-size automobiles that was sold from 1995 through 2010 by Chrysler. Three generations of convertibles, two generations of sedans, and two generations of coupes were produced. Although the coupe shared the same name and some styling cues, it was mechanically unrelated to the other Sebring models.
The Chrysler 3.3 and 3.8 engines are V6 engines used by Chrysler from 1989 to 2011. This engine family was Chrysler's first 60° V6 engine designed and built in-house for front wheel drive vehicles, and their first V6 not based on a V8. It was designed as a larger, more powerful alternative to the Mitsubishi 3.0 V6 in the minivans and debuted in 1989 for the 1990 model year. They were later also used in some rear wheel drive cars like the Jeep Wrangler.
The Chrysler Town & Country is a minivan that was manufactured and marketed by Chrysler from 1990 to the 2016 model years. The third Chrysler minivan introduced in North America, the Town & Country adopted its nameplate from the flagship Chrysler station wagon line, adopting its exterior woodgrain trim as a design feature for several generations.
Full-size car—also known as large car—is a vehicle size class which originated in the United States and is used for cars larger than mid-size cars. It is the largest size class for cars. In Europe, it is known as E-segment or F-segment.
The Chrysler LHS is a full-size luxury four-door sedan that was produced by Chrysler for the 1994 through the 2001 model years, with a one-year hiatus for 1998. It replaced the Chrysler Imperial and the Chrysler Fifth Avenue as the division's flagship model. The LHS was rebadged as the Concorde Limited for the 2002 model year.
The Eagle Medallion, also marketed as the Renault Medallion, is a rebadged and mildly re-engineered North American version of the French Renault 21 marketed by American Motors Corporation under the Renault brand for the 1988 model year, and by Chrysler's Jeep/Eagle division for the 1989 model year.
The Lamborghini Portofino is a concept car developed for Lamborghini by Kevin Verduyn, one of Chrysler's chief designers. Introduced at the 1987 Frankfurt Auto Show, it was a fully functional, four-door, four-seat sport sedan.
The single overhead cam V6 engine introduced in 1993 was a major advancement for Chrysler. It was derived from Chrysler's first homegrown front-wheel drive V6, the Chrysler 3.3 engine. The SOHC V6 has been replaced by the Chrysler Pentastar engine.
The Dodge Intrepid is a full-sized front-wheel drive four-door sedan that was produced by Dodge for the 1993 to 2004 model years. It is related to the Chrysler 300M, Chrysler Concorde, Chrysler LHS, Chrysler New Yorker, and Eagle Vision which were all built on Chrysler's new "cab forward" LH platform.
Chrysler is a brand of North American vehicles owned by Stellantis. The automaker was founded in 1925 by Walter Chrysler from the remains of the Maxwell Motor Company. The brand primarily focused on building luxury vehicles as the broader Chrysler Corporation expanded, following a strategy of brand diversification and hierarchy largely adopted from General Motors. However, the company and the brand have struggled to adapt to changing markets. As of 2024, the company's vehicle lineup solely consists of the Pacifica minivan.
Notes:1Rebadged models from European manufacturers
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
