Norton CS1

Last updated

Norton CS1
Norton CS1 1929.jpg
Manufacturer Norton Motorcycles
Also calledCammy Norton. Cricket Bat Motor (1920s).
Production1927–1939
Engine 490cc bevel drive overheadcam single cylinder
Top speed85 mph[ citation needed ]
Power 25 bhp[ citation needed ]
Brakes drum
Weight319 pounds (145 kg)[ citation needed ] (wet)

The CS1 was a Norton motorcycle between 1927 and 1939. Originally built as a TT racer, and Norton's first design of an overhead cam engine, it proved successful as a TT Replica road bike. [1]

Contents

After the early 1930s redesign of Norton's cammy models by Arthur Carroll, the CS1 became an upmarket road bike. The 500 cc CS1 and its smaller sibling 350 cc CJ1 continued on until the outbreak of WW2 in 1939.

Many later touring CS1 models were upgraded for racing, by adding and subtracting all the optional racing bits for Internationals. The Norton catalog had a long list of such parts available. The identifying feature of 1930s CS1 Models is the stub fitted carburettor - Inter models had a bolt-on TT carburettor.

Development

The Norton Camshaft Senior Model 1 (CS1) engine was designed by Walter Moore in 1927, based on the Norton ES2 pushrod engine and re-using many parts. The frame was a new full cradle design and with a close-ratio kickstart-less gearbox, 8-inch brakes, Amal TT carburettor, Lucas Racing magneto and a 3-gallon petrol tank. The CS1 was the standard for racing Nortons for the next 20 years. [2] The magneto was moved to the rear of the engine and the bottom end was a traditional Norton design, but in the side of the crankcase was the oil pump housing and a pair of bevel gears to drive the long shaft which ran in a tube up the side of the engine to a second pair of gears driving the overhead camshaft. [1]

Racing success

Alec Bennett riding the CS1 on its first race won the Isle of Man Senior TT in 1927 and Stanley Woods set the fastest lap at 70.99 mph before retiring. [3]

Unknown rider Tim Hunt won the Amateur TT in following year on a Norton CS1, setting a new TT record. He later used the same motorcycle to win the Gold Medal in the Scottish Six Days Trial. [2]

In 1928 a Junior version of the CS1 with a 348cc engine and designated the Norton CJ was entered for the Isle of Man TT. The bore and stroke of this engine was 71 x 88 mm and it looked promising but 1928 proved to be an unlucky year for Norton, as there were technical problems with Walter Moore's redesigned cambox and only one major race was won that year. 1929 also went badly with reliability problems and only one win in the Spanish GP of 1929. [3]

In March 1931 on Pendine Sands Joe Craig and Tim Hunt achieved a best speed on the CS1 of 118 mph. [3] Also in 1931 the Norton CS1 took the first five places in Junior and Senior events, starting what was to prove Norton's most successful period, and until the end of the 1930s Norton dominated international events with wins in both classes throughout the decade. [3] Tim Hunt became the first rider to win two TT races in one week, with success in the Junior TT Race in 3 h 34 min 21 s at an average speed of 73.4 mph and also the Senior TT Race in 3 h 23 min 28 s at an average speed of 77.90 mph. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Norton Motorcycle Company</span> British motorcycle manufacturer

The Norton Motorcycle Company is a brand of motorcycles headquartered in Solihull, West Midlands,, England. For some years around 1990, the rights to use the name on motorcycles was owned by North American financiers.

<span class="mw-page-title-main">AJS</span> British automobile and motorcycle manufacturer from 1909 to 1931

A. J. Stevens & Co. Ltd was a British automobile and motorcycle manufacturer in operation from 1909 to 1931. The company was founded by Joe Stevens in Wolverhampton, England. After the firm was sold, the name continued to be used by Matchless, Associated Motorcycles and Norton-Villiers on four-stroke motorcycles until 1969, and since the name's resale in 1974, on lightweight, two-stroke scramblers and today on small-capacity roadsters and cruisers. The company held 117 motorcycle world records.

<span class="mw-page-title-main">Matchless</span> British motorcycle and automobile manufacturer

Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.

<span class="mw-page-title-main">BSA Gold Star</span> Motorcycle made by BSA from 1938 to 1963.

The BSA Gold Star is a motorcycle made by BSA from 1938 to 1963. They were 350 cc and 500 cc single-cylinder four-stroke production motorcycles known for being among the fastest bikes of the 1950s. Being hand built and with many optional performance modifications available, each motorcycle came from the factory with documented dynamometer test results, allowing the new owner to see the horsepower (bhp) produced.

<span class="mw-page-title-main">Leslie Graham</span> British motorcycle racer

Robert Leslie Graham was a British motorcycle road racer who competed in the 1930s and 1940s. He won the inaugural Grand Prix motorcycle racing 500 cc World Championship in 1949.

<span class="mw-page-title-main">Jimmie Guthrie</span> Scottish motorcycle racer

James Guthrie was a Scottish motorcycle racer.

<span class="mw-page-title-main">AJS Porcupine</span>

The AJS 500 cc Porcupine was a British racing motorcycle built by Associated Motor Cycles (AMC), which débuted in 1945 with a horizontal-engine designated E90S. The later E95 model was developed with an inclined-engine. AMC produced AJS and Matchless brands at the time.

<span class="mw-page-title-main">Henry Tyrell-Smith</span> Irish motorcycle racer

Henry George Tyrell-Smith (1907–1982) was an Irish motorcycle road racer. He was born in Co Dublin and studied at Trinity College, Dublin for a B.A. And B.A.I.degree. He raced at the Isle of Man TT from 1927 to 1939, and between 1929 and 1936 competed in the German Grand Prix. He also raced in The Swedish Grand Prix in Saxtorp 1933–36.

<span class="mw-page-title-main">1931 Isle of Man TT</span>

The 1931 Isle of Man Tourist Trophy was again dominated by the battle between Rudge, Sunbeam and Norton motorcycles.

<span class="mw-page-title-main">Norton Commando</span> British motorcycle produced from 1967 to 1977

The Norton Commando is a British Norton-Villiers motorcycle with an OHV pre-unit parallel-twin engine, produced by the Norton Motorcycle company from 1967 until 1977. Initially having a nominal 750 cc displacement, actually 745 cc (45.5 cu in), in 1973 it became an 850 cc, actually 828 cc (50.5 cu in). It had a hemi-type head, similar to all OHV Norton engines since the early 1920s.

<span class="mw-page-title-main">AJS V4</span> Racing motorcycle

The AJS V4 started out as a prototype air-cooled V4 road bike, but became a water-cooled and supercharged racing bike.

Dougal Marchant was an English motorcycle designer, active from the 1920s to the 1950s.

<span class="mw-page-title-main">Doug Hele</span> British motorcycle engineer

Douglas Lionel Hele was a pioneering British motorcycle engineer with Triumph and other firms: BSA, Douglas and Norton. He was born in Birmingham in 1919 and died in Hagley, Worcestershire on 2 November 2001.

<span class="mw-page-title-main">Norton Dominator</span> Type of motorcycle

The Dominator is a twin cylinder motorcycle developed by Norton to compete against the Triumph Speed Twin. The original Dominator was designed in 1947 and 1948 by Bert Hopwood, who had been on the Speed Twin design team at Triumph. Available for sale from mid 1949, this design set the pattern for Norton twins for the next 30 years.

<span class="mw-page-title-main">Norton International</span> Type of motorcycle

The Norton International or Cammy Norton is a Norton Motors Ltd overhead cam (OHC) motorcycle built between 1931 and 1957.

<span class="mw-page-title-main">Featherbed frame</span> Motorcycle frame

The featherbed frame was a motorcycle frame invented by the McCandless brothers and offered to the British Norton motorcycle company to improve the performance of their racing motorcycles in 1950. It was considered revolutionary at the time, and the best handling frame that a racer could have. Later adopted for Norton production motorcycles, it was also widely used by builders of custom hybrids such as the Triton, becoming legendary and remaining influential to this day.

<span class="mw-page-title-main">BSA A10 series</span> Motorcycle

The BSA A10 series was a range of 646 cc (39.4 cu in) air-cooled parallel twin motorcycles designed by Bert Hopwood and produced by Birmingham Small Arms Company at Small Heath, Birmingham from 1950 to 1963. The series was succeeded by the A65 unit construction models.

<span class="mw-page-title-main">Norton Commando Production Racer</span> Type of motorcycle

The Norton Commando Production Racer was a hand built production racer produced by Norton-Villiers from 1970 - 1972. It was based on the road-going Norton Commando, and although fitted with lights it was never intended as a road bike. The model was commonly known as the Yellow Peril.

<span class="mw-page-title-main">Norton Model 88 Dominator</span> Type of motorcycle

The Norton Model 88 Dominator, also originally known as the Dominator De Luxe was a 500 cc vertical twin motorcycle manufactured by the British Norton Motorcycle Company from 1952 to 1966. It was the first of Norton's motorcycles to use the featherbed frame, which established Norton's reputation of producing fine handling machines. The 88 used the Bert Hopwood designed engine that was first fitted to the Model 7 and was initially for export only. It became available on the home market in 1953. Norton were a small manufacturer at the time and without the economies of scale the model was expensive compared to other manufacturer's equivalent machines. The 88 retailed for 20% more than the contemporary Triumph Speed Twin and was dearer than the 650 cc Triumph Thunderbird.

<span class="mw-page-title-main">Norton Model 99 Dominator</span> Type of motorcycle

The Norton Model 99 Dominator was a 600 cc vertical twin motorcycle manufactured by the British Norton Motorcycle Company at their Bracebridge St, Birmingham factory from 1956 to 1962. The 99 was based on the 500 cc Model 88 Dominator with an enlarged engine. The model was superseded by the 650SS.

References

  1. 1 2 Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN   978-1-86147-136-9.
  2. 1 2 McIntosh, Ken (October 2008). "The Norton CS1" . Retrieved 26 December 2008.
  3. 1 2 3 4 "Norton SOHC History". Archived from the original on 28 August 2008. Retrieved 26 December 2008.
  4. "Tim (Percy) Hunt, TT Racer" . Retrieved 26 December 2008.