Overproduction (music)

Last updated

Overproduction is the excessive use of audio effects, layering, or digital manipulation in music production.

Contents

Uses of the term

It is not always clear what critics mean by "overproduction", but there are a minimum of a few common uses of the term:

All five of these meanings share the idea that a record producer or mastering engineer has made "unnecessary" additions or changes to a record in the production process and, in doing so, has decreased the quality or enjoyability of the music. There is little consensus among music critics or producers about when the use of an effect or production technique becomes excessive. For this reason, some producers consider the term unhelpful, confusing, and subjective. [4]

The excessive use of dynamic range compression has been bemoaned by critics as part of the "loudness war". In August 2006, Bob Dylan criticized modern recording techniques, saying that modern records "have sound all over them" and that they sound like "static". [5] Those responding to Dylan's comments seemed to assume that he was referring to the trend of increasingly compressed music. [6] [7]

The use of pitch correction technologies such as Melodyne often invites claims of overproduction. In particular, since late 1998, the use of the Auto-Tune audio processor for pitch correction has become pervasive in pop music and has elicited criticism.

In spite of the decreasing cost and increasing availability of professional or near-professional recording software and techniques, musicians and producers in some genres consciously set themselves against the idea of "overproduction" and attempt to make music with a rough or "lo-fi" sound.

See also

Notes

  1. "The Beatles Let It Be...Naked" . Retrieved 2 April 2008.
  2. "Let It Be - Beatles (The) - Review - Goodbye, George Martin--Hello, Phil Spector" . Retrieved 2 April 2008.
  3. "Mutt Lange".
  4. "Record Production and the "Over Production" Myth". Archived from the original on 4 March 2016. Retrieved 18 Oct 2015.
  5. "Dylan rubbishes modern recordings". BBC News. 23 August 2006. Retrieved 2 April 2008.
  6. "The Death of High Fidelity". Archived from the original on December 29, 2007. Retrieved 2 April 2008.
  7. "Music + digital + compression = atrocious sound?". Archived from the original on 15 December 2007. Retrieved 2 April 2008.

Related Research Articles

<span class="mw-page-title-main">Effects unit</span> Electronic device that alters audio

An effects unit or effects pedal is an electronic device that alters the sound of a musical instrument or other audio source through audio signal processing.

<span class="mw-page-title-main">Sound effect</span> Artificially created or enhanced sound

A sound effect is an artificially created or enhanced sound, or sound process used to emphasize artistic or other content of films, television shows, live performance, animation, video games, music, or other media.

Art rock is a subgenre of rock music that generally reflects a challenging or avant-garde approach to rock, or which makes use of modernist, experimental, or unconventional elements. Art rock aspires to elevate rock from entertainment to an artistic statement, opting for a more experimental and conceptual outlook on music. Influences may be drawn from genres such as experimental music, avant-garde music, classical music, and jazz.

<span class="mw-page-title-main">Record producer</span> Individual who oversees and manages the recording of an artists music

A record producer is a music recording project's overall supervisor whose responsibilities can involve a range of creative and technical leadership roles. Typically the job involves hands-on oversight of recording sessions: ensuring artists deliver acceptable performances, supervising the technical engineering of the recording, and coordinating the production team and process. The producer's involvement in a musical project can vary in depth and scope. Sometimes in popular genres the producer may create the recording's entire sound and structure. However, in classical music recording, for example, the producer serves as more of a liaison between the conductor and the engineering team. The role is often likened to that of a film director though there are important differences. It is distinct from the role of an executive producer, who is mostly involved in the recording project on an administrative level, and from the audio engineer who operates the recording technology.

<span class="mw-page-title-main">Audio mixing</span> Combining input sources to output channels

Audio mixing is the process by which multiple sounds are combined into one or more channels. In the process, a source's volume level, frequency content, dynamics, and panoramic position are manipulated or enhanced. This practical, aesthetic, or otherwise creative treatment is done in order to produce a finished version that is appealing to listeners.

<span class="mw-page-title-main">Post-production</span> Step in film, video, audio or photography process

Post-production is part of the process of filmmaking, video production, audio production, and photography. Post-production includes all stages of production occurring after principal photography or recording individual program segments.

<span class="mw-page-title-main">Mastering (audio)</span> Form of audio post-production

Mastering, a form of audio post production, is the process of preparing and transferring recorded audio from a source containing the final mix to a data storage device, the source from which all copies will be produced. In recent years, digital masters have become usual, although analog masters—such as audio tapes—are still being used by the manufacturing industry, particularly by a few engineers who specialize in analog mastering.

<span class="mw-page-title-main">Dynamic range compression</span> Audio signal processing operation

Dynamic range compression (DRC) or simply compression is an audio signal processing operation that reduces the volume of loud sounds or amplifies quiet sounds, thus reducing or compressing an audio signal's dynamic range. Compression is commonly used in sound recording and reproduction, broadcasting, live sound reinforcement and in some instrument amplifiers.

<span class="mw-page-title-main">Jangle</span> Guitar sound and technique

Jangle or jingle-jangle is a sound typically characterized by undistorted, treble-heavy electric guitars played in a droning chordal style. The sound is mainly associated with pop music as well as 1960s guitar bands, folk rock, and 1980s indie music. It is sometimes classed as its own subgenre, jangle pop. Music critics use the term to suggest guitar pop that evokes a bright mood.

<span class="mw-page-title-main">Wall of Sound</span> Music production effect developed by Phil Spector

The Wall of Sound is a music production formula developed by American record producer Phil Spector at Gold Star Studios, in the 1960s, with assistance from engineer Larry Levine and the conglomerate of session musicians later known as "the Wrecking Crew". The intention was to exploit the possibilities of studio recording to create an unusually dense orchestral aesthetic that came across well through radios and jukeboxes of the era. Spector explained in 1964: "I was looking for a sound, a sound so strong that if the material was not the greatest, the sound would carry the record. It was a case of augmenting, augmenting. It all fit together like a jigsaw."

dbx (noise reduction) Family of noise reduction systems

dbx is a family of noise reduction systems developed by the company of the same name. The most common implementations are dbx Type I and dbx Type II for analog tape recording and, less commonly, vinyl LPs. A separate implementation, known as dbx-TV, is part of the MTS system used to provide stereo sound to North American and certain other TV systems. The company, dbx, Inc., was also involved with Dynamic Noise Reduction (DNR) systems.

<span class="mw-page-title-main">Auto-Tune</span> Audio processor that alters pitch

Auto-Tune is an audio processor introduced in 1997 by the American company Antares Audio Technologies. It uses a proprietary device to measure and alter pitch in vocal and instrumental music recording and performances.

<span class="mw-page-title-main">Pitch correction</span> Technique for calibrating the pitch of an audio recording to match musical notes

Pitch correction is an electronic effects unit or audio software that changes the intonation of an audio signal so that all pitches will be notes from the equally tempered system. Pitch correction devices do this without affecting other aspects of its sound. Pitch correction first detects the pitch of an audio signal, then calculates the desired change and modifies the audio signal accordingly. The widest use of pitch corrector devices is in Western popular music on vocal lines.

<span class="mw-page-title-main">Pitch shifting</span> Audio processing technique that changes the original pitch of a sound

Pitch shifting is a sound recording technique in which the original pitch of a sound is raised or lowered. Effects units that raise or lower pitch by a pre-designated musical interval (transposition) are called pitch shifters.

<span class="mw-page-title-main">Loudness war</span> Increasing levels in recorded music

The loudness war is a trend of increasing audio levels in recorded music, which reduces audio fidelity and—according to many critics—listener enjoyment. Increasing loudness was first reported as early as the 1940s, with respect to mastering practices for 7-inch singles. The maximum peak level of analog recordings such as these is limited by varying specifications of electronic equipment along the chain from source to listener, including vinyl and Compact Cassette players. The issue garnered renewed attention starting in the 1990s with the introduction of digital signal processing capable of producing further loudness increases.

Parallel compression, also known as New York compression, is a dynamic range compression technique used in sound recording and mixing. Parallel compression, a form of upward compression, is achieved by mixing an unprocessed 'dry', or lightly compressed signal with a heavily compressed version of the same signal. Rather than lowering the highest peaks for the purpose of dynamic range reduction, it decreases the dynamic range by raising up the softest sounds, adding audible detail. It is most often used on stereo percussion buses in recording and mixdown, on electric bass, and on vocals in recording mixes and live concert mixes.

Dialnorm is the metadata parameter that controls playback gain within the Dolby Laboratories Dolby Digital (AC-3) audio compression system. Dialnorm stands for dialog normalization. Dialnorm is an integer value with range 1 to 31 corresponding to a playback gain of -30 to 0 dB (unity) respectively. Higher values afford more headroom and are appropriate for dynamic material such as an action film.

<span class="mw-page-title-main">Phil Spector</span> American record producer (1939–2021)

Harvey Phillip Spector was an American record producer and songwriter, best known for his innovative recording practices and entrepreneurship in the 1960s, followed decades later by his two trials and conviction for murder in the 2000s. Spector developed the Wall of Sound, a production style that is characterized for its diffusion of tone colors and dense orchestral sound, which he described as a "Wagnerian" approach to rock and roll. He is widely regarded as one of the most influential figures in pop music history and one of the most successful producers of the 1960s.

<span class="mw-page-title-main">Audio mixing (recorded music)</span> Audio mixing to yield recorded sound

In sound recording and reproduction, audio mixing is the process of optimizing and combining multitrack recordings into a final mono, stereo or surround sound product. In the process of combining the separate tracks, their relative levels are adjusted and balanced and various processes such as equalization and compression are commonly applied to individual tracks, groups of tracks, and the overall mix. In stereo and surround sound mixing, the placement of the tracks within the stereo field are adjusted and balanced. Audio mixing techniques and approaches vary widely and have a significant influence on the final product.

<span class="mw-page-title-main">Recording studio as an instrument</span>

In music production, the recording studio is often treated as a musical instrument when it plays a significant role in the composition of music. Sometimes called "playing the studio", the approach is typically embodied by artists or producers who favor the creative use of studio technology in record production, as opposed to simply documenting live performances in studio. Techniques include the incorporation of non-musical sounds, overdubbing, tape edits, sound synthesis, audio signal processing, and combining segmented performances (takes) into a unified whole.