Overdubbing

Last updated

Overdubbing (also known as layering) [1] is a technique used in audio recording in which audio tracks that have been pre-recorded are then played back and monitored, while simultaneously recording new, doubled, or augmented tracks onto one or more available tracks of a digital audio workstation (DAW) or tape recorder. [2] The overdub process can be repeated multiple times. This technique is often used with singers, as well as with instruments, or ensembles/orchestras. Overdubbing is typically done for the purpose of adding richness and complexity to the original recording. For example, if there are only one or two artists involved in the recording process, overdubbing can give the effect of sounding like many performers. [3]

Contents

In vocal performances, the performer usually listens to an existing recorded performance (usually through headphones in a recording studio) and simultaneously plays a new performance along with it, which is also recorded. The intention is that the final mix will contain a combination of these "dubs". [4]

Another kind of overdubbing is the so called "tracking" (or "laying the basic tracks"), where tracks containing the rhythm section (usually including drums) are recorded first, then following up with overdubs (solo instruments, such as keyboards or guitar, then finally vocals). This method has been the standard technique for recording popular music since the early 1960s. Today, overdubbing can be accomplished even on basic recording equipment, or a typical PC equipped with a sound card, [4] using digital audio workstation software.

Because the process of overdubbing involves working with pre-recorded material, the performers involved do not have to ever have physically met each other, nor even still be alive. In 1991, decades after her father Nat King Cole had died, Natalie Cole released a "virtual duet" recording of "Unforgettable" where she overdubbed her vocals onto her father's original recording from the 1960s. As there is no limit in timespan with overdubbing, there is likewise no limit in distance, nor in the number of overdubbed layers. Perhaps the most wide-reaching collaborative overdub recording was accomplished by Eric Whitacre in 2013, where he edited together a "Virtual Choir" of 8,409 audio tracks from 5,905 people from 101 countries. [5]

History

Perhaps the earliest commercial issue of recordings with overdubs was by RCA Victor in the late 1920s, not long after the introduction of electric microphones into the recording studio. Recordings by the late Enrico Caruso still sold well, so RCA took some of his early records made with only piano accompaniment, added a studio orchestra, and reissued the recordings.[ citation needed ]

A foreshadow of overdubbing can be seen with Sidney Bechet, an American jazz musician who made a pair of famous overdubbed sides in 1941 entitled "The Sheik of Araby" and "Blues of Bechet". The multi-instrumentalist recorded the clarinet, soprano, tenor saxophone, piano and the bass and drum parts for both songs, and then he recorded each track separately on top of one another to create two single tracks. The recordings were then issued as "Sidney Bechet's One Man Band". [6]

The 1946 Disney animated film Make Mine Music includes overdubbed duo and trio performances by Nelson Eddy as an opera singing whale. [7] The 1950 Disney film Cinderella used multiple tracks for vocals for the song "Oh, Sing Sweet Nightingale".

In 1948, experiments mixing sound effects and musical instruments made by Pierre Schaeffer at the Radio Télédiffusion Française experimental studio in Paris led to Étude aux Tourniquets, the first avant-garde composition using recording as a composition technique, recorded, and mixed directly on acetate records as tape recorders were not yet available. Similar sound collage experiments had been made by Edgard Varèse in the 1920s, but Varèse, also a French composer, wrote scores later played live by musicians. As from 1949, Schaeffer composed and recorded on acetates with Pierre Henry (Symphonie pour un homme seul, 1950), who also recorded with Varèse in 1954. Together, they used some of the earliest tape recorders available in the early 1950s.

The invention of magnetic tape opened up new possibilities for overdubbing, particularly with the development of multitrack recording with sel-sync. One of the first known commercially released overdubbed recordings was "Confess" for Mercury Records by Patti Page in 1948, although this overdubbing was done with acetate. With the popularity of this recording, Page recorded "With My Eyes Wide Open I'm Dreaming" using the same overdubbing technique. [8] The vocals were listed as "Voices by: Patti Page, Patti Page, Patti Page, Patti Page".[ citation needed ]

Les Paul was an early innovator of overdubbing, and began to experiment with it around 1930. [9] :213 He originally created multi-track recordings by using a modified disk lathe to record several generations of sound on a single disk, [10] before later using tape technology, having been given one of the first Ampex 300 series tape recorders as a gift from Bing Crosby. [11] His 1950 #1 hit, "How High The Moon", performed with his then-wife Mary Ford, featured a then-significant amount of overdubbing, along with other studio techniques such as flanging, delay, phasing and vari-speed. [9] :xxii–xxiii [12]

Les Paul's advancements in recording were seen in the adoption of his techniques by artists like Buddy Holly. In 1958, Holly released "Words of Love" and "Listen to Me", which were composed with overdubbing for added instrumentation and harmonies. [13]

Peter Ustinov performed multiple voices on "Mock Mozart", in a recording produced by George Martin. Abbey Road Studios had no multitrack recorders at the time, so a pair of mono machines were used. Martin used the same process later for a Peter Sellers comedy record, this time using stereo machines and panning.[ citation needed ]

Ross Bagdasarian, also known as David Seville, combined overdubbing with tape speed manipulation to create "The Chipmunk Song," performing the voices of all three Chipmunks, Alvin, Simon, and Theodore, recorded to a half-normal-speed playback of the instrumental backup; and conversing with the singing rodents in his own voice, recorded at full speed.

Examples

Overdubs can be made for a variety of reasons. One of the most obvious is for convenience; for example, if a bass guitarist were temporarily unavailable, the recording can be made and the bass track added later. Similarly, if only one or two guitarists are available, but a song calls for multiple guitar parts, a guitarist can play both lead and rhythm guitar. Overdubbing is also used to solidify a weak singer; double tracking allows a singer with poor intonation to sound more in tune. (The opposite of this is often used with sampled instruments; detuning the sample slightly can make the sound more lifelike.) The effect is used to give one singer a fuller sound. They would effectively harmonize with their own vocals, like a choir but with just one voice.

Overdubbing has sometimes been viewed negatively, when it is seen as being used to artificially enhance the musical skills of an artist or group, such as with studio-recorded inserts to live recordings, or backing tracks created by session musicians instead of the credited performers. The early records of the Monkees were made by groups of studio musicians pre-recording songs (often in a different studio, and some before the band was even formed), which were later overdubbed with the Monkees' vocals. While the songs became hits, this practice drew criticism. Michael Nesmith in particular disliked what overdubbing did to the integrity of the band's music. [14] Additionally, in working with producer Butch Vig, Kurt Cobain had expressed a disdain for double-track recording. Vig had to reportedly convince Cobain to use the recording technique by saying, "The Beatles did it on everything. John Lennon loved the sound of his voice double-tracked." [15]

In December 2023 Paul McCartney put the concept of overdubbing in the spotlight by re-releasing an underdubbed version of the Paul McCartney and Wings album Band on the Run . The underdubbed tracks highlight the bare-bones nature of the album's original recordings made in the EMI Records studio in Lagos, Nigeria before additional instruments were added in London. [16]

Paulinho da Costa's song "Ritmo Number One" from his 1977 album "Agora" uses a base track with surdo (big bass drum) and percussion, overdubbed with 8 percussion tracks (repique, pandeiro, congas, tamborims, a-go-go, cuíca, bell tree, reco-reco).

See also

Related Research Articles

<span class="mw-page-title-main">Record producer</span> Individual supervising a musical project

A record producer or music producer is a music creating project's overall supervisor whose responsibilities can involve a range of creative and technical leadership roles. Typically the job involves hands-on oversight of recording sessions; ensuring artists deliver acceptable and quality performances, supervising the technical engineering of the recording, and coordinating the production team and process. The producer's involvement in a musical project can vary in depth and scope. Sometimes in popular genres the producer may create the recording's entire sound and structure. However, in classical music recording, for example, the producer serves as more of a liaison between the conductor and the engineering team. The role is often likened to that of a film director though there are important differences. It is distinct from the role of an executive producer, who is mostly involved in the recording project on an administrative level, and from the audio engineer who operates the recording technology.

<span class="mw-page-title-main">Tape recorder</span> Machine for recording sound

An audio tape recorder, also known as a tape deck, tape player or tape machine or simply a tape recorder, is a sound recording and reproduction device that records and plays back sounds usually using magnetic tape for storage. In its present-day form, it records a fluctuating signal by moving the tape across a tape head that polarizes the magnetic domains in the tape in proportion to the audio signal. Tape-recording devices include the reel-to-reel tape deck and the cassette deck, which uses a cassette for storage.

<span class="mw-page-title-main">Recording studio</span> Facility for sound recording

A recording studio is a specialized facility for recording and mixing of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enough to record a single singer-guitarist, to a large building with space for a full orchestra of 100 or more musicians. Ideally, both the recording and monitoring spaces are specially designed by an acoustician or audio engineer to achieve optimum acoustic properties.

<span class="mw-page-title-main">Multitrack recording</span> Separate recording of multiple sound sources to create a cohesive whole

Multitrack recording (MTR), also known as multitracking, is a method of sound recording developed in 1955 that allows for the separate recording of multiple sound sources or of sound sources recorded at different times to create a cohesive whole. Multitracking became possible in the mid-1950s when the idea of simultaneously recording different audio channels to separate discrete tracks on the same reel-to-reel tape was developed. A track was simply a different channel recorded to its own discrete area on the tape whereby their relative sequence of recorded events would be preserved, and playback would be simultaneous or synchronized.

<span class="mw-page-title-main">Reel-to-reel audio tape recording</span> Audio recording using magnetic tape spooled on open reels

Reel-to-reel audio tape recording, also called open-reel recording, is magnetic tape audio recording in which the recording tape is spooled between reels. To prepare for use, the supply reel containing the tape is placed on a spindle or hub. The end of the tape is manually pulled from the reel, threaded through mechanical guides and over a tape head assembly, and attached by friction to the hub of the second, initially empty takeup reel. Reel-to-reel systems use tape that is 1412, 1, or 2 inches wide, which normally moves at 3+347+12, 15 or 30 inches per second. Domestic consumer machines almost always used 14 inch (6.35 mm) or narrower tape and many offered slower speeds such as 1+78 inches per second (4.762 cm/s). All standard tape speeds are derived as a binary submultiple of 30 inches per second.

Automatic double-tracking or artificial double-tracking (ADT) is an analogue recording technique designed to enhance the sound of voices or instruments during the mixing process. It uses tape delay to create a delayed copy of an audio signal which is then played back at slightly varying speed controlled by an oscillator and combined with the original. The effect is intended to simulate the sound of the natural doubling of voices or instruments achieved by double tracking. The technique was developed in 1966 by engineers at Abbey Road Studios in London at the request of the Beatles.

Ping-pong recording is a method of sound recording. It involves combining multiple track stems into one, allowing more room for overdubbing when using tape recorders with a limited set of tracks. It is also used to simplify mixdowns.

Double tracking or doubling is an audio recording technique in which a performer sings or plays along with their own prerecorded performance, usually to produce a stronger or bigger sound than can be obtained with a single voice or instrument. It is a form of overdubbing; the distinction comes from the doubling of a part, as opposed to recording a different part to go with the first. The effect can be further enhanced by panning one of the performances hard left and the other hard right in the stereo field.

<span class="mw-page-title-main">Sound recording and reproduction</span> Recording of sound and playing it back

Sound recording and reproduction is the electrical, mechanical, electronic, or digital inscription and re-creation of sound waves, such as spoken voice, singing, instrumental music, or sound effects. The two main classes of sound recording technology are analog recording and digital recording.

The history of sound recording - which has progressed in waves, driven by the invention and commercial introduction of new technologies — can be roughly divided into four main periods:

"Vegetables" is a song by American rock band the Beach Boys from their 1967 album Smiley Smile and their unfinished Smile project. Written by Brian Wilson and Van Dyke Parks, the song was conceived by Wilson as a tongue-in-cheek promotion of organic food. Another reported inspiration for the song was a humorous comment Wilson heard about the effect of marijuana turning him and his friends into a "vegetative" state.

Re-amping is a process often used in multitrack recording in which a recorded signal is routed back out of the editing environment and run through external processing using effects units and then into a guitar amplifier and a guitar speaker cabinet or a reverb chamber. Originally, the technique was used mostly for electric guitars: it facilitates a separation of guitar playing from guitar amplifier processing—a previously recorded audio program is played back and re-recorded at a later time for the purpose of adding effects, ambiance such as reverb or echo, and the tone shaping imbued by certain amps and cabinets. The technique has since evolved over the 2000s to include many other applications. Re-amping can also be applied to other instruments and program, such as recorded drums, synthesizers, and virtual instruments.

<i>Kum Back</i> 1970 bootleg studio album by The Beatles

Kum Back is the first bootleg album by the Beatles, released in January 1970. The album is an early version of what would become Let It Be, sourced from a tape recording of an acetate prepared by the band's engineer, Glyn Johns. It is one of the earliest commercial rock bootlegs, the first being Great White Wonder by Bob Dylan which was released several months earlier.

<span class="mw-page-title-main">Recording practices of the Beatles</span>

The studio practices of the Beatles evolved during the 1960s and, in some cases, influenced the way popular music was recorded. Some of the effects they employed were sampling, artificial double tracking (ADT) and the elaborate use of multitrack recording machines. They also used classical instruments on their recordings and guitar feedback. The group's attitude towards the recording process was summed up by Paul McCartney: "We would say, 'Try it. Just try it for us. If it sounds crappy, OK, we'll lose it. But it might just sound good.' We were always pushing ahead: Louder, further, longer, more, different."

<span class="mw-page-title-main">History of multitrack recording</span>

Multitrack recording of sound is the process in which sound and other electro-acoustic signals are captured on a recording medium such as magnetic tape, which is divided into two or more audio tracks that run parallel with each other. Because they are carried on the same medium, the tracks stay in perfect synchronization, while allowing multiple sound sources to be recorded at different times.

Direct-to-disc recording refers to sound recording methods that bypass the use of magnetic tape recording and record audio directly onto analog disc masters.

Universal Recording Corporation was a recording studio in Chicago founded by Bill Putnam, Sr. for the purpose of investigating new recording techniques and the development of specialized recording equipment.

<span class="mw-page-title-main">Audio mixing (recorded music)</span> Audio mixing to yield recorded sound

In sound recording and reproduction, audio mixing is the process of optimizing and combining multitrack recordings into a final mono, stereo or surround sound product. In the process of combining the separate tracks, their relative levels are adjusted and balanced and various processes such as equalization and compression are commonly applied to individual tracks, groups of tracks, and the overall mix. In stereo and surround sound mixing, the placement of the tracks within the stereo field are adjusted and balanced. Audio mixing techniques and approaches vary widely and have a significant influence on the final product.

<span class="mw-page-title-main">Music technology (electric)</span> Musical instruments and recording devices that use electrical circuits

Electric music technology refers to musical instruments and recording devices that use electrical circuits, which are often combined with mechanical technologies. Examples of electric musical instruments include the electro-mechanical electric piano, the electric guitar, the electro-mechanical Hammond organ and the electric bass. All of these electric instruments do not produce a sound that is audible by the performer or audience in a performance setting unless they are connected to instrument amplifiers and loudspeaker cabinets, which made them sound loud enough for performers and the audience to hear. Amplifiers and loudspeakers are separate from the instrument in the case of the electric guitar, electric bass and some electric organs and most electric pianos. Some electric organs and electric pianos include the amplifier and speaker cabinet within the main housing for the instrument.

<span class="mw-page-title-main">Recording studio as an instrument</span>

In music production, the recording studio is often treated as a musical instrument when it plays a significant role in the composition of music. Sometimes called "playing the studio", the approach is typically embodied by artists or producers who favor the creative use of studio technology in record production, as opposed to simply documenting live performances in studio. Techniques include the incorporation of non-musical sounds, overdubbing, tape edits, sound synthesis, audio signal processing, and combining segmented performances (takes) into a unified whole.

References

  1. "Recording Process". Audio House. Retrieved August 19, 2020.
  2. Huber, David (2010). Modern Recording Techniques (7th ed.). Elsevier Inc. p. 31. ISBN   978-0-240-81069-0.
  3. The Carpenters - Richard explains overdubbing (YouTube, published Feb 11, 2011)
    During a live concert by The Carpenters, Richard Carpenter explains how his and his sister's voices are made to sound like many more voices by the technique of overdubbing. The band then gives a demonstration of layering voices.
  4. 1 2 Bruce Bartlett (20 May 2013). Practical Recording Techniques: The Step- by- Step Approach to Professional Audio Recording. CRC Press. p.  209. ISBN   978-1-136-12533-1.
  5. "Eric Whitacre's Virtual Choir 4: Fly to Paradise". YouTube .
  6. Palmer, R (February 3, 1982). "The Pop Life". The New York Times.
  7. Rich, Sharon (2014). Sweethearts: The Timeless Love Story - On-Screen and Off - Between Jeanette MacDonald and Nelson Eddy.
  8. Sylvester, B (May 30, 2003). "10 questions for patti page". Goldmine. 29: 26.
  9. 1 2 Michael Zager (2011). Music Production: For Producers, Composers, Arrangers, and Students . Scarecrow Press. ISBN   978-0-8108-8202-7.
  10. Mary Alice Shaughnessy (1993). Les Paul: an American original. W. Morrow. p. 140. ISBN   978-0-688-08467-7.
  11. Cleveland, B (December 2009). "Les paul 1915–2009: Les paul's new sound". Guitar Player (43): 86–87.
  12. Johnston, R (April 1997). "Gearheads: Les paul". Guitar Player. 31: 31–32.
  13. Dahl, B (February 1, 2008). "The crickets are chirping". Goldmine. 34: 20–21.
  14. Andrew Sandoval (2005). The Monkees: The Day-by-Day Story of the 60s TV Pop Sensation . Thunder Bay Press. p.  80. ISBN   1-59223-372-4.
  15. Fricke, D (September 13, 2001). "The tenth anniversary of nirvana's "nevermind": A guide to nirvana's bootlegs - vital episodes in kurt cobain's life". Rolling Stone Magazine.
  16. Postelwait, Cameron. "Band On The Run – Underdubbed Mix Review". SleepyJack.

Further reading