Pair of pants (mathematics)

Last updated
A pair of pants represented in space, with its boundary colored red. Pair of pants.png
A pair of pants represented in space, with its boundary colored red.

In mathematics, a pair of pants is a surface which is homeomorphic to the three-holed sphere. The name comes from considering one of the removed disks as the waist and the two others as the cuffs of a pair of pants.

Contents

Pairs of pants are used as building blocks for compact surfaces in various theories. Two important applications are to hyperbolic geometry, where decompositions of closed surfaces into pairs of pants are used to construct the Fenchel-Nielsen coordinates on Teichmüller space, and in topological quantum field theory where they are the simplest non-trivial cobordisms between 1-dimensional manifolds.

Pants and pants decomposition

Pants as topological surfaces

A pair of pants as a plane domain (in blue, with the boundary in red) Pants in the plane.png
A pair of pants as a plane domain (in blue, with the boundary in red)

A pair of pants is any surface that is homeomorphic to a sphere with three holes, which formally is the result of removing from the sphere three open disks with pairwise disjoint closures. Thus a pair of pants is a compact surface of genus zero with three boundary components.

The Euler characteristic of a pair of pants is equal to −1, and the only other surface with this property is the punctured torus (a torus minus an open disk).

Pants decompositions

Two different pants decompositions for the surface of genus 2 Pants decomposition genus2.png
Two different pants decompositions for the surface of genus 2

The importance of the pairs of pants in the study of surfaces stems from the following property: define the complexity of a connected compact surface of genus with boundary components to be , and for a non-connected surface take the sum over all components. Then the only surfaces with negative Euler characteristic and complexity zero are disjoint unions of pairs of pants. Furthermore, for any surface and any simple closed curve on which is not homotopic to a boundary component, the compact surface obtained by cutting along has a complexity that is strictly less than . In this sense, pairs of pants are the only "irreducible" surfaces among all surfaces of negative Euler characteristic.

By a recursion argument, this implies that for any surface there is a system of simple closed curves which cut the surface into pairs of pants. This is called a pants decomposition for the surface, and the curves are called the cuffs of the decomposition. This decomposition is not unique, but by quantifying the argument one sees that all pants decompositions of a given surface have the same number of curves, which is exactly the complexity. [1] For connected surfaces a pants decomposition has exactly pants.

A collection of simple closed curves on a surface is a pants decomposition if and only if they are disjoint, no two of them are homotopic and none is homotopic to a boundary component, and the collection is maximal for these properties.

The pants complex

Elementary moves between pants decomposition Pants moves.png
Elementary moves between pants decomposition

A given surface has infinitely many distinct pants decompositions (we understand two decompositions to be distinct when they are not homotopic). One way to try to understand the relations between all these decompositions is the pants complex associated to the surface. This is a graph with vertex set the pants decompositions of , and two vertices are joined if they are related by an elementary move, which is one of the two following operations:

The pants complex is connected [2] (meaning any two pants decompositions are related by a sequence of elementary moves) and has infinite diameter (meaning that there is no upper bound on the number of moves needed to get from one decomposition to the other). In the particular case when the surface has complexity 1, the pants complex is isomorphic to the Farey graph.

The action of the mapping class group on the pants complex is of interest for studying this group. For example, Allen Hatcher and William Thurston have used it to give a proof of the fact that it is finitely presented.

Pants in hyperbolic geometry

Moduli space of hyperbolic pants

The interesting hyperbolic structures on a pair of pants are easily classified. [3]

For all there is a hyperbolic surface which is homeomorphic to a pair of pants and whose boundary components are simple closed geodesics of lengths equal to . Such a surface is uniquely determined by the up to isometry.

By taking the length of a cuff to be equal to zero, one obtains a complete metric on the pair of pants minus the cuff, which is replaced by a cusp. This structure is of finite volume.

Pants and hexagons

The geometric proof of the classification in the previous paragraph is important for understanding the structure of hyperbolic pants. It proceeds as follows: Given a hyperbolic pair of pants with totally geodesic boundary, there exist three unique geodesic arcs that join the cuffs pairwise and that are perpendicular to them at their endpoints. These arcs are called the seams of the pants.

Cutting the pants along the seams, one gets two right-angled hyperbolic hexagons which have three alternate sides of matching lengths. The following lemma can be proven with elementary hyperbolic geometry. [4]

If two right-angled hyperbolic hexagons each have three alternate sides of matching lengths, then they are isometric to each other.

So we see that the pair of pants is the double of a right-angled hexagon along alternate sides. Since the isometry class of the hexagon is also uniquely determined by the lengths of the remaining three alternate sides, the classification of pants follows from that of hexagons.

When a length of one cuff is zero one replaces the corresponding side in the right-angled hexagon by an ideal vertex.

Fenchel-Nielsen coordinates

A point in the Teichmüller space of a surface is represented by a pair where is a complete hyperbolic surface and a diffeomorphism.

If has a pants decomposition by curves then one can parametrise Teichmüller pairs by the Fenchel-Nielsen coordinates which are defined as follows. The cuff lengths are simply the lengths of the closed geodesics homotopic to the .

The twist parameters are harder to define. They correspond to how much one turns when gluing two pairs of pants along : this defines them modulo . One can refine the definition (using either analytic continuation [5] or geometric techniques) to obtain twist parameters valued in (roughly, the point is that when one makes a full turn one changes the point in Teichmüller space by precomposing with a Dehn twist around ).

The pants complex and the Weil-Petersson metric

One can define a map from the pants complex to Teichmüller space, which takes a pants decomposition to an arbitrarily chosen point in the region where the cuff part of the Fenchel-Nielsen coordinates are bounded by a large enough constant. It is a quasi-isometry when Teichmüller space is endowed with the Weil-Petersson metric, which has proven useful in the study of this metric. [6]

Pairs of pants and Schottky groups

These structures correspond to Schottky groups on two generators (more precisely, if the quotient of the hyperbolic plane by a Schottky group on two generators is homeomorphic to the interior of a pair of pants then its convex core is an hyperbolic pair of pants as described above, and all are obtained as such).

2-dimensional cobordisms

This link cobordism between the Hopf link and the unlink is topologically a pair of pants. Stef57 Cobordisme en dim 1.jpg
This link cobordism between the Hopf link and the unlink is topologically a pair of pants.

A cobordism between two n-dimensional closed manifolds is a compact (n+1)-dimensional manifold whose boundary is the disjoint union of the two manifolds. The category of cobordisms of dimension n+1 is the category with objects the closed manifolds of dimension n, and morphisms the cobordisms between them (note that the definition of a cobordism includes the identification of the boundary to the manifolds). Note that one of the manifolds can be empty; in particular a closed manifold of dimension n+1 is viewed as an endomorphism of the empty set. One can also compose two cobordisms when the end of the first is equal to the start of the second. A n-dimensional topological quantum field theory (TQFT) is a monoidal functor from the category of n-cobordisms to the category of complex vector space (where multiplication is given by the tensor product).

In particular, cobordisms between 1-dimensional manifolds (which are unions of circles) are compact surfaces whose boundary has been separated into two disjoint unions of circles. Two-dimensional TQFTs correspond to Frobenius algebras, where the circle (the only connected closed 1-manifold) maps to the underlying vector space of the algebra, while the pair of pants gives a product or coproduct, depending on how the boundary components are grouped – which is commutative or cocommutative. Further, the map associated with a disk gives a counit (trace) or unit (scalars), depending on grouping of boundary, which completes the correspondence.

Notes

  1. Ratcliffe 2006, Theorem 9.7.1.
  2. Hatcher & Thurston 1980.
  3. Ratcliffe 2006, Theorem 9.7.3.
  4. Ratcliffe 2006, Theorem 3.5.14.
  5. Imayoshi & Taniguchi 1992, p. 63.
  6. Brock, Jeff (2002). "Pants decompositions and the Weil-Petersson metric". In Earle, Clifford J.; Harvey, William J.; Recillas-Pishmish, Sevín (eds.). Complex Manifolds and Hyperbolic Geometry. Contemporary Mathematics. Vol. 311. Providence, RI: American Mathematical Society. pp. 27–40. doi:10.1090/conm/311/05445. ISBN   978-0-8218-7901-6.

Related Research Articles

<span class="mw-page-title-main">Surface (topology)</span> Two-dimensional manifold

In the part of mathematics referred to as topology, a surface is a two-dimensional manifold. Some surfaces arise as the boundaries of three-dimensional solid figures; for example, the sphere is the boundary of the solid ball. Other surfaces arise as graphs of functions of two variables; see the figure at right. However, surfaces can also be defined abstractly, without reference to any ambient space. For example, the Klein bottle is a surface that cannot be embedded in three-dimensional Euclidean space.

<span class="mw-page-title-main">Gauss–Bonnet theorem</span> Differential geometry theorem

In the mathematical field of differential geometry, the Gauss–Bonnet theorem is a fundamental formula which links the curvature of a surface to its underlying topology.

<span class="mw-page-title-main">Riemann surface</span> One-dimensional complex manifold

In mathematics, particularly in complex analysis, a Riemann surface is a one-dimensional complex manifold.

<span class="mw-page-title-main">Cobordism</span>

In mathematics, cobordism is a fundamental equivalence relation on the class of compact manifolds of the same dimension, set up using the concept of the boundary of a manifold. Two manifolds of the same dimension are cobordant if their disjoint union is the boundary of a compact manifold one dimension higher.

<span class="mw-page-title-main">Low-dimensional topology</span> Branch of topology

In mathematics, low-dimensional topology is the branch of topology that studies manifolds, or more generally topological spaces, of four or fewer dimensions. Representative topics are the structure theory of 3-manifolds and 4-manifolds, knot theory, and braid groups. This can be regarded as a part of geometric topology. It may also be used to refer to the study of topological spaces of dimension 1, though this is more typically considered part of continuum theory.

In the mathematical field of geometric topology, a Heegaard splitting is a decomposition of a compact oriented 3-manifold that results from dividing it into two handlebodies.

<span class="mw-page-title-main">Handlebody</span>

In the mathematical field of geometric topology, a handlebody is a decomposition of a manifold into standard pieces. Handlebodies play an important role in Morse theory, cobordism theory and the surgery theory of high-dimensional manifolds. Handles are used to particularly study 3-manifolds.

<span class="mw-page-title-main">Handle decomposition</span>

In mathematics, a handle decomposition of an m-manifold M is a union

<span class="mw-page-title-main">3-manifold</span> Mathematical space

In mathematics, a 3-manifold is a topological space that locally looks like a three-dimensional Euclidean space. A 3-manifold can be thought of as a possible shape of the universe. Just as a sphere looks like a plane to a small enough observer, all 3-manifolds look like our universe does to a small enough observer. This is made more precise in the definition below.

In mathematics, more precisely in topology and differential geometry, a hyperbolic 3-manifold is a manifold of dimension 3 equipped with a hyperbolic metric, that is a Riemannian metric which has all its sectional curvatures equal to −1. It is generally required that this metric be also complete: in this case the manifold can be realised as a quotient of the 3-dimensional hyperbolic space by a discrete group of isometries.

In topology, a branch of mathematics, a Dehn surgery, named after Max Dehn, is a construction used to modify 3-manifolds. The process takes as input a 3-manifold together with a link. It is often conceptualized as two steps: drilling then filling.

In mathematics, a fundamental polygon can be defined for every compact Riemann surface of genus greater than 0. It encodes not only the topology of the surface through its fundamental group but also determines the Riemann surface up to conformal equivalence. By the uniformization theorem, every compact Riemann surface has simply connected universal covering surface given by exactly one of the following:

In mathematics, Thurston's classification theorem characterizes homeomorphisms of a compact orientable surface. William Thurston's theorem completes the work initiated by Jakob Nielsen (1944).

In mathematics, the Teichmüller space of a (real) topological surface is a space that parametrizes complex structures on up to the action of homeomorphisms that are isotopic to the identity homeomorphism. Teichmüller spaces are named after Oswald Teichmüller.

In differential geometry, the Margulis lemma is a result about discrete subgroups of isometries of a non-positively curved Riemannian manifold. Roughly, it states that within a fixed radius, usually called the Margulis constant, the structure of the orbits of such a group cannot be too complicated. More precisely, within this radius around a point all points in its orbit are in fact in the orbit of a nilpotent subgroup.

In mathematics, Fenchel–Nielsen coordinates are coordinates for Teichmüller space introduced by Werner Fenchel and Jakob Nielsen.

In mathematics, and more precisely in topology, the mapping class group of a surface, sometimes called the modular group or Teichmüller modular group, is the group of homeomorphisms of the surface viewed up to continuous deformation. It is of fundamental importance for the study of 3-manifolds via their embedded surfaces and is also studied in algebraic geometry in relation to moduli problems for curves.

In mathematics, the Thurston boundary of Teichmüller space of a surface is obtained as the boundary of its closure in the projective space of functionals on simple closed curves on the surface. The Thurston boundary can be interpreted as the space of projective measured foliations on the surface.

In the mathematical field of topology, a manifold M is called topologically rigid if every manifold homotopically equivalent to M is also homeomorphic to M.

In mathematics, the curve complex is a simplicial complex C(S) associated to a finite-type surface S, which encodes the combinatorics of simple closed curves on S. The curve complex turned out to be a fundamental tool in the study of the geometry of the Teichmüller space, of mapping class groups and of Kleinian groups. It was introduced by W.J.Harvey in 1978.

References