Perry (car)

Last updated

The Perry was a British car made by the Perry Motor Company based in Tyseley, Birmingham who made cars between 1913 and 1916.

Contents

History

The company can trace its roots back to 1824 with James and Stephen Perry making pens in a workshop in London, later moving to Birmingham and building bicycles. By the late 1890s they were having financial problems and were bought by James William Bayliss, part owner of the Bayliss-Thomas car making company. [1]

Their first car, a three-wheeler, was made in 1899 [1] followed by a forecar in 1903. Cecil Bayliss, the son of the new owner, built a cyclecar in 1911 with an 800 cc Fafnir engine, and this was developed into the first Perry car to reach production.

Perry 8hp

Perry 8
Overview
ManufacturerPerry Motor Company
Production1912–1915
approx 800 made
Designer Cecil Bayliss
Body and chassis
Class cyclecar
Body style two-seat open with optional dickey seat.
Powertrain
Engine Perry twin-cylinder 875 cc [1]
Transmission 3-speed manual
Dimensions
Wheelbase 84 or 90 inches (2132 or 2284 mm) [1]
Length123 inches (3124 mm) [2]
Width56 inches (1422 mm) [2]
Chronology
Successornone

The Perry cyclecar was described as 'just placed on the market' when exhibited at the November 1912 Motor Cycle and Cycle Car Show at Olympia. It was described as 'an exact replica of a full-sized model, but is of exceptionally light weight - less than 7cwt'. [3]

The engine for the car was built in-house and was a twin-cylinder vertical water cooled unit, with 72 mm (2.83 in) bore and 108 mm (4.25 in) stroke, unusual in that both pistons rose and fell at the same time. Drive was to the rear wheels through a 3-speed gearbox with reverse and worm-driven axle and spur differential. The rear springing was unusual in that the long semi-elliptic leaf springs were supplemented by coil springs. It was fitted with Sankey detachable wheels and Dunlop tyres.

The basic body was an open two-seater, but a long-wheelbase version allowing a dickey seat was also available.

About 800 were made. [1]

Perry 11.9

Perry 11.9
Overview
ManufacturerPerry Motor Company
Production1914–1915
approx 300 made
Designer Cecil Bayliss
Body and chassis
Body style two- or four-seat open with optional dickey seat.
Powertrain
Engine Perry 4-cylinder 1795 cc [1]
Transmission 3-speed manual
Dimensions
Wheelbase 102 inches (2591 mm) [1]
Length157.5 inches (4000 mm) [2]
Width62 inches (1575 mm) [2]
Chronology
Successor Bean 11.9

A full-sized car was introduced in 1914 with four-cylinder 1795 cc engine with a 69 mm (2.72 in) bore and 120 mm (4.72 in) stroke. The larger car allowed four seat bodies to be offered as well as two seaters and these were mainly made by Mulliners of Birmingham. [1]

About 300 were made before World War I curtailed car-building activities. A very few were made in 1919 when the design, jigs, patterns and tools were sold to Bean Cars for £15,000, [4] who reintroduced it as the Bean 11.9.

See also

Related Research Articles

<span class="mw-page-title-main">Tiny (car)</span>

Tiny was a British cyclecar manufactured by Nanson, Barker & Co at Esholt, Yorkshire between 1912 and 1915.

<span class="mw-page-title-main">Bédélia</span> Archetype of the French cyclecars

Bédélia was the archetype of the French cyclecars.

<span class="mw-page-title-main">Swift Motor Company</span>

The Swift Motor Company made Swift Cars in Coventry, England from 1900 until 1931. It grew progressively from James Starley's Coventry Sewing Machine Company, via bicycle and motorised cycle manufacture. The cars ranged from a single-cylinder car in 1900 using an MMC engine, through a Swift-engined twin-cylinder 7-horsepower light car in 1904, and a 3-litre model in 1913. After the First World War a successful range was sold during the 1920s, but the Cadet of 1930 was its last vehicle as it could not compete economically with volume manufacturers such as Ford and Morris Motors.

Lloyd Cars Ltd was a British motor manufacturer, founded by Roland Lloyd (1904–1965), son of a garage owner, and based in Patrick Street, Grimsby, Lincolnshire, England between 1936 and 1951. Two models were made, separated by World War II; the company was unusual for a small manufacturer in making nearly all components in-house. After car production ceased the company continued in general engineering until 1983. During World War II the company made components for Rolls-Royce Merlin aircraft engines.

Wooler was a British manufacturer of motorcycles and automobiles, founded by engineer John Wooler in 1911 based in Alperton, Middlesex. The company became known for its unconventional designs which included several fore-and-aft twins, a vertical camshaft single cylinder machine, a transverse-four beam engine, and a transverse flat four. Most machines possessed Wooler's enduring design features of a petrol tank which extended past the steering head.

<span class="mw-page-title-main">Coventry Premier</span>

Coventry Premier Limited owned a British car and cyclecar manufacturing business based in Coventry from 1912 to 1923. It changed its name from Premier Cycles to Coventry Premier Ltd in November 1914.

The Xtra was an English three-wheel cyclecar launched at the Olympia show in November 1921 and built until 1924 by Xtra Cars, Ltd., of London Road, Chertsey, Surrey.

<span class="mw-page-title-main">Ariel Motorcycles</span>

Ariel Motorcycles was a British maker of bicycles and then motorcycles in Bournbrook, Birmingham. It was an innovator in British motorcycling, part of the Ariel marque. The company was sold to BSA in 1951 but the brand survived until 1967. Influential Ariel designers included Val Page and Edward Turner. The last motorcycle-type vehicle to carry the Ariel name was a short-lived three-wheel tilting moped in 1970.

<span class="mw-page-title-main">Rudge-Whitworth</span> British bicycle, motorcycle and sports car manufacturer

Rudge Whitworth Cycles was a British bicycle, bicycle saddle, motorcycle and sports car wheel manufacturer that resulted from the merger of two bicycle manufacturers in 1894, Whitworth Cycle Co. of Birmingham, founded by Charles Henry Pugh and his two sons Charles Vernon and John, and Rudge Cycle Co. of Coventry.

<span class="mw-page-title-main">Douglas (motorcycles)</span> British motorcycle manufacturer

Douglas was a British motorcycle manufacturer from 1907 to 1957 based in Kingswood, Bristol, owned by the Douglas family, and especially known for its horizontally opposed twin cylinder engined bikes and as manufacturers of speedway machines. The company also built a range of cars between 1913 and 1922.

The Rover 8 was a small single-cylinder 8 hp 1327 cc car made by the British Rover car company. It was Rover's first production car. It was remarkable for being supported by a backbone chassis rather than a conventional ladder frame. The first model was manufactured from 1904 to 1912. A Daimler-Knight sleeve valve engine option was available on the original model in 1911 and 1912.

<span class="mw-page-title-main">Austin 10 hp</span> Motor vehicle

The Austin 10 hp is a high-quality small car produced between 1910 and 1915 by the British car manufacturer Austin Motor Company Limited at their Longbridge, Worcestershire plant near Birmingham. 1,336 cars were made, 213 with the 1125 cc engine and 1,123 with the 1615 cc engine. Like the 1087 cc Austin 7 hp produced by both Austin and Du Cros's Swift Motor Company it was not very successful when sold with the small engine.

The Hampton was a British car made by the Hampton Engineering Company, which was based in Kings Norton, Birmingham from 1912 to 1918 and at Dudbridge in Stroud, Gloucestershire, from 1918 to 1933.

<span class="mw-page-title-main">Vauxhall B-Type</span> Motor vehicle

The Vauxhall 27, 30 and 35 h.p. is a large six cylinder car manufactured by Vauxhall from 1910 to 1914. The 27 h.p. was Vauxhall's first six-cylinder car.

<span class="mw-page-title-main">Austin 15 hp</span> Motor vehicle

The Austin 15 hp is a 2.8-litre motor car manufactured by the British manufacturer Austin and first displayed at the seventh exhibition of motor vehicles which opened at London's Olympia in November 1908. Its tax rating was 20 horsepower. It was sold between 1908 and 1915.

<span class="mw-page-title-main">Warren-Lambert</span> British automobile manufacturer

The Warren-Lambert Engineering Co. Ltd. was a British automobile manufacturer that was established from 1912 to 1922 in Richmond, then in Surrey. A. Warren Lambert, was an agent for Morgan cars in Putney which he also raced. In 1912 he designed and started to manufacture a two-seat four-wheel cyclecar from premises in Uxbridge Road, Shepherd's Bush. It was well received and around 25 cars a week were being made.

<span class="mw-page-title-main">SIMA-Violet</span>

Sima Violet was a French manufacturer of cyclecars between 1924 and 1929.

<span class="mw-page-title-main">Rhode (car)</span>

The Rhode was a British car made from 1921 to 1930. Mead and Deakin Ltd had started in business making cycle and motor cycle components. They also made the "Canoelet" sidecar. In 1912 they made at least two cyclecars under the name of Medea with 1244cc Chapuis-Dornier engines but these did not go into series production.

F. E. Baker Ltd was a British motorcycle engine and cyclecar engine manufacturer based in the Precision Works, Moorsom Street, Birmingham, England. Founded in 1906 by Frank Edward Baker, the company produced motorcycle engines under the Precision trademark until 1919. Precision engines were used by a wide range of motorcycle manufacturers in the United Kingdom and in other parts of the Commonwealth and were also used in cyclecars. Many manufacturers used the 'Precision' trademark as part of their model names, and in 1912 there was a 'Precision' motorcycle sold in Australia, but it is unclear if this was manufactured by F. E. Baker or just permitted use of the trademark by a motorcycle manufacturer.

<span class="mw-page-title-main">Arthur William Wall</span> British engineer (1874 - unknown)

Arthur William Wall was an engineer in the field of motorised transport and inventor of the self-powered wheel in England in the early 20th century. He is best known for his creation of the self-powered wheel, the Wall Autowheel, which could be used to power a bicycle, but he was also the man behind Roc motorcycles and a tricar and four-wheel cyclecar. His main company was A. W. Wall Ltd, but he created several other companies to compartmentalise his different activities, such as the Roc Gear Co, who supplied epicyclic gears to a significant number of manufacturers before WW1.

References

  1. 1 2 3 4 5 6 7 8 Georgano, G.N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN   1-57958-293-1.
  2. 1 2 3 4 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN   0-333-16689-2.
  3. "The Motor Cycle and Cycle Car Show". The Automotor Journal: 1452. 30 November 1912.
  4. "The Bean". historywebsite.co.uk. Retrieved 10 March 2014.