R1 (New York City Subway car)

Last updated
R1
NYC Subway R1 100.jpg
R1 car 100 at 23rd Street on the Holiday Shopper's Special
In service1931–1976
Manufacturer American Car and Foundry Company
Built at Berwick, Pennsylvania
Family name R1–9s
Constructed1930–1931
Scrapped1968–1977
Number built300
Number preserved4
Number scrapped296
Successor R40
R42
R44
R46
FormationMotorized single units (Half-width operator's cab at each end; conductor controls on exterior)
Fleet numbers100–399
Capacity56 seats
Operators Independent Subway System
NYC Board of Transportation
New York City Transit Authority
Specifications
Car body constructionRiveted steel
Car length60 ft 6 in (18.44 m)
Width10 ft 0 in (3.05 m)
Height12 ft 1.9375 in (3.71 m)
Floor height3 ft 1.875 in (0.96 m)
Doors8 sets of 45 inch wide side doors per car
Maximum speed55 mph (89 km/h)
Weight84,081 lb (38,139 kg)
Traction system Westinghouse ABF type UP143B switch group, with XM-29 master controller using Westinghouse 570 D-5 traction motors (190 hp each). Two motors per car (both on motor truck, trailer truck not motorized).
Power output190 hp (142 kW) per traction motor
Acceleration 1.75 mph/s (2.82 km/(h⋅s))
Deceleration ~ 3 mph/s
Electric system(s) 600 V DC Third rail
Current collector(s) Contact shoe (Top running)
Braking system(s) WABCO Schedule AMUE with UE-5 universal valve, ME-23 brake stand, and simplex clasp brake rigging. (Air Compressor: WABCO D-3-F)
Coupling system WABCO H2A
Track gauge 4 ft 8+12 in (1,435 mm)

The R1 was the first New York City Subway car type built for the Independent Subway System (IND). 300 cars were manufactured between 1930 and 1931 by the American Car and Foundry Company, numbered 100 through 399, all arranged as single units. Nicknamed City Cars, the R1s were the first of five subway car classes collectively referred to as the R1–9 fleet, with future passenger stock orders – including contracts R4, R6, R7/A, and R9 – being virtually identical, with minor mechanical and cosmetic variations.

Contents

The first R1s were delivered in 1931, in anticipation for the opening of the IND Eighth Avenue Line. For their time, the R1s introduced several improvements to subway car design that greatly sped up the flow of passengers in and out of trains. The R40s, R42s, R44s, and R46s gradually replaced the fleet of R1s, with the final run taking place in 1976. Several R1 cars were saved for preservation, while the rest were scrapped.

Description

The R1s were numbered 100–399. They were the first "R" type contract order (referring to the practice of naming a car class by the letter "R" – which stands for rolling stock – followed by a number derived from the actual contract number). Future orders of subway cars, including those built for the A Division, would follow the R contract. The R2 contract order was for trucks and motors for the R1 fleet. In 1930, each new car cost $39,201: $30,483 for the car body under contract R1, and $8,718 for trucks and motors under contract R2. [1]

History

R1 car 100 on the IND Rockaway Line, celebrating the restoration of service to the Rockaways in 2013 NYCT 6658 (8894931341).jpg
R1 car 100 on the IND Rockaway Line, celebrating the restoration of service to the Rockaways in 2013

The first R1 cars to see passenger service were twenty individual cars to serve for two eight-car trains plus spares that were placed in revenue service on the BMT Sea Beach Line from July 8 to November 1931 for testing and then returned to the IND the same year. [2] [1] The BMT was to have been paid by the City of New York for the testing, but since the trains were well used in passenger service, the BMT and City called it even.

The cars were ordered so that the new Eighth Avenue Line subway could be operated. [1]

In 1949, when all of the R10 cars were delivered and placed in service on the A, some of the R1 cars were transferred to the Coney Island Yard to relieve a car shortage on the BMT Southern Division, as well as to provide fleet for the conversion of the Astoria Line to exclusive BMT operation in fall 1949. [3] :123–125 The fleet was expanded by stages and reached 140 cars by 1953. They were used for service on the BMT 2 (now R) Broadway–4th Avenue Local service. However, despite ostensibly relieving a car shortage on the BMT, through subway service in rush hours to Coney Island did not occur on the BMT West End Line until December 1953, and on the BMT Culver Line until October 1954, when that line became part of the IND Culver Line. Upon delivery of the R16 cars in 1954–1955, the cars were returned to the IND Division.

Retirement

Most R1s were retired from 1968 to 1970 as age decayed the cars' internal components, causing the cars to perform worse than their newer contemporaries. Some were replaced by the R40s [4] while many more were replaced by the R42s, but some remained past 1970 until being retired and replaced by the R44s. However, car 369, which was renumbered to 576 on October 3, 1969 [4] and then to 1768 on August 27, 1973, [4] was transferred to the East New York Yard. It ran on the Eastern Division until December 1, 1976, [4] when it was finally replaced by the R46s.

Following their removal from service, the majority of the fleet was scrapped. A small number of cars remained in work service and were used until the 1980s. Several other cars have been preserved and remain today, including:

Car 175 is at the Seashore Trolley Museum, but is used only for storage and as a source of spare parts. It does not have trucks, and two of its side doors were donated to R4 401, which has been preserved by Railway Preservation Corp. and restored.

Related Research Articles

<span class="mw-page-title-main">Brooklyn–Manhattan Transit Corporation</span> Defunct transit operator in New York City

The Brooklyn–Manhattan Transit Corporation (BMT) was an urban transit holding company, based in Brooklyn, New York City, United States, and incorporated in 1923. The system was sold to the city in 1940. Today, together with the IND subway system, it forms the B Division of the modern New York City Subway.

<span class="mw-page-title-main">Independent Subway System</span> Defunct subway operator in New York City

The Independent Subway System was a rapid transit rail system in New York City that is now part of the New York City Subway. It was first constructed as the Eighth Avenue Line in Manhattan in 1932. It was originally also known as the Independent City-Owned Subway System (ICOSS) or the Independent City-Owned Rapid Transit Railroad (ICORTR).

<span class="mw-page-title-main">R4 (New York City Subway car)</span> Retired class of New York City Subway car

The R4 was a New York City Subway car model built from 1932 to 1933 by the American Car and Foundry Company in Berwick, Pennsylvania. These subway cars were purchased for the IND Division. A total of 500 R4s were built, numbered 400–899, and arranged as single units. They were practically identical to the R1s, which preceded them, except that the R4s had a slightly different side door panel than the R1, adding small handle notches below the door window.

<span class="mw-page-title-main">R32 (New York City Subway car)</span> Retired class of New York City Subway car

The R32 was a New York City Subway car model built by the Budd Company from 1964 to 1965 for the IND/BMT B Division. A total of 600 R32s were built, numbered 3350–3949, though some cars were re-numbered. The R32 contract was divided into two subcontracts of 300 cars each: R32 and R32A ; the former was paid by the city's capital budget and the latter was paid through a revenue bond. All were arranged as married pairs.

<span class="mw-page-title-main">R46 (New York City Subway car)</span> Class of New York City Subway car

The R46 is a New York City Subway car model that was built by the Pullman Standard Company from 1975 to 1978 for the IND/BMT B Division. They replaced all remaining R1–9 fleet cars and General Electric-powered R16s, and some R10s. The R46 order initially consisted of 754 single cars, each 75 feet (23 m) long, and was the largest single order of passenger cars in United States railroad history at the point of the fleet's completion. The R46 was the second order of 75-foot cars to be ordered for the New York City Subway, after the R44s.

<span class="mw-page-title-main">R44 (New York City Subway car)</span> Class of New York City Subway car

The R44 is a New York City Subway car model built by the St. Louis Car Company from 1971 to 1973 for the B Division and the Staten Island Railway (SIR). The cars replaced many R1-R9 series cars, and all remaining 1925 Standard Steel built SIRTOA ME-1 trains, providing Staten Island with a new fleet of railcars. The R44 fleet originally consisted of 352 cars, of which 57 remain in service, all on the Staten Island Railway.

<span class="mw-page-title-main">R42 (New York City Subway car)</span> Retired class of New York City Subway car

The R42 was a New York City Subway car model built by the St. Louis Car Company between 1969 and 1970 for the IND/BMT B Division. There were 400 cars in the R42 fleet, numbered 4550–4949. It was the last 60-foot (18.29 m) B Division car built for the New York City Subway until the R143 in 2001, and the last car model class to be built in married pairs.

<span class="mw-page-title-main">R40 (New York City Subway car)</span> Retired class of New York City Subway car

The R40 was a New York City Subway car model built by the St. Louis Car Company from 1967 to 1969 for the IND/BMT B Division. There were 400 cars in the R40 fleet, arranged in married pairs. Two versions of the R40 were manufactured: the original 200-car R40 order built in 1967–1968, and the supplementary 200-car R40A order built in 1968–1969, with the last 100 cars of the supplementary order re-designed with straight ends. The 200 original R40s and the first 100 R40As were unique for their futuristic 10-degree slanted end and were nicknamed the R40 Slants or simply Slants. Due to safety concerns, the final 100 cars of the R40A order were re-designed with traditional straight-ends by Sundberg-Ferar and became known unofficially as the "R40M".

<span class="mw-page-title-main">New York City Subway rolling stock</span>

The New York City Subway is a large rapid transit system and has a large fleet of electric multiple unit rolling stock. As of November 2016, the New York City Subway has 6418 cars on the roster.

<span class="mw-page-title-main">R1–9 fleet</span> Retired classes of New York City Subway car

The R1-9s were the 1,703 similar New York City Subway cars built between 1930 and 1940 for the Independent Subway System. All were built by the American Car and Foundry Company, the Pressed Steel Car Company, and Pullman Standard. The name comes from the literal spelling out of the final contract under which these 1,703 cars were ordered – contract "R9".

<span class="mw-page-title-main">R6 (New York City Subway car)</span> Retired class of New York City Subway car

The R6 was a New York City Subway car model built from 1935 to 1936 for the city-operated Independent Subway System by three manufacturers under separate orders, the American Car and Foundry Company, Pullman Standard, and Pressed Steel Car Company. A total of 500 cars were built, numbered 900–1399, and arranged as single units. There were three versions of the R6: R6-1, R6-2, and R6-3. The R6s were a continuation of the R4 fleet and look almost the same, except that the R6 had a two-pane front window compared to the R4's one-pane window.

<span class="mw-page-title-main">R10 (New York City Subway car)</span> Retired class of New York City Subway car

The R10 was the first series of post-war New York City Subway cars. They were built by the American Car and Foundry Company from 1948 to 1949 for the IND/BMT B Division. A total of 400 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars. The R10s introduced many innovations, including an all-welded low-alloy high tensile (LAHT) steel construction, dynamic braking, improved propulsion, and various cosmetic features.

<span class="mw-page-title-main">R12 (New York City Subway car)</span> Retired class of New York City Subway car

The R12 was a New York City Subway car built by the American Car and Foundry Company in 1948. A total of 100 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.

Starting in 1899, the Brooklyn Rapid Transit Company and Brooklyn–Manhattan Transit Corporation operated rapid transit lines in New York City — at first only elevated railways and later also subways.

<span class="mw-page-title-main">R16 (New York City Subway car)</span> Retired class of New York City Subway car

The R16 was a New York City Subway car model built by the American Car and Foundry Company from 1954 to 1955 for the IND/BMT B Division. A total of 200 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.

<span class="mw-page-title-main">R7 (New York City Subway car)</span> Retired class of New York City Subway car

The R7 was a New York City Subway car model built from 1937 to 1938 for the city-operated Independent Subway System by two manufacturers under separate orders, the American Car and Foundry Company and Pullman Standard. They were a continuation of the R6 fleet and closely resemble them, except that the R7/As did not include the “CITY OF NEW YORK” lettering on the middle of the car exterior. A total of 250 cars were built, all arranged as single units. Two versions were ordered: the R7, which consisted of 150 cars, numbered 1400–1549, and the R7A, which consisted of 100 cars, numbered 1550–1649.

<span class="mw-page-title-main">R9 (New York City Subway car)</span> Retired class of New York City Subway car

The R9 was a New York City Subway car model, which was built by the American Car and Foundry Company and the Pressed Steel Car Company in 1940 for the Independent Subway System (IND) and its successors, which included the New York City Board of Transportation and the New York City Transit Authority. Identical to the preceding R7/As, the R9s had distinctive curved ends on the rollsign boxes and contained distinct 2CY air compressors not featured on the older cars in the R1–9 fleet. A total of 153 cars were built, numbered 1650–1802, and arranged as single units. They were the last R1–9 type cars that were ordered before the merger of the IND with the IRT and BMT in 1940.

<span class="mw-page-title-main">C-type (New York City Subway car)</span> Retired class of Brooklyn Rapid Transit cars

The C-type was a series of elevated New York City Subway cars originally built by the Osgood-Bradley, Laconia, and Jewett car companies, and rebuilt by the Brooklyn Rapid Transit Company between 1923 and 1925 from former BU cars.

<span class="mw-page-title-main">World's Fair Lo-V (New York City Subway car)</span> Retired class of New York City Subway car

The World's Fair Lo-V was a New York City Subway car type built in 1938 by the St. Louis Car Company in St. Louis, Missouri. These 50 cars were ordered for the IRT Flushing Line in preparation for the 1939 World's Fair. They were the fourth and last "Lo-V" type cars that were ordered, and the last cars ordered for the IRT before the city takeover in 1940.

<span class="mw-page-title-main">Standard Lo-V (New York City Subway car)</span> Retired class of New York City Subway car

The Standard Lo-V was a New York City Subway car type built from 1916 to 1925 by the Pressed Steel Car Company, American Car and Foundry, and Pullman Company for the IRT. A total of 1,020 cars were built, which consisted of 725 motors and 295 trailers. It was the third and most common "Lo-V" type car ordered for the IRT.

References

  1. 1 2 3 Cunningham, Joseph; DeHart, Leonard O. (1993). A History of the New York City Subway System. J. Schmidt, R. Giglio, and K. Lang.
  2. "Showing Image 47727". nycsubway.org.
  3. Cudahy, Brian J. (1995). Under the Sidewalks of New York (Second revised ed.). Fordham University Press. ISBN   0-8232-1618-7.
  4. 1 2 3 4 Oszustowicz, Eric (March 2006). "A History Of The R-1 To R-9 Passenger Car Fleet Passenger Car Fleet" (PDF). The Bulletin, New York Division, Electric Railroaders' Association. Vol. 49, no. 3. Archived from the original (PDF) on 2021-04-27. Retrieved 2021-04-27.

Further reading

Commons-logo.svg Media related to R1 (New York City Subway car) at Wikimedia Commons