R26 | |
---|---|
In service | 1959–2002 |
Manufacturer | American Car and Foundry |
Family name | Redbirds |
Replaced |
|
Constructed | 1959–1960 |
Entered service | October 12, 1959 |
Refurbished |
|
Scrapped | 2001–2003 |
Number built | 110 |
Number preserved | 2 |
Number scrapped | 108 |
Successor | R142 and R142A |
Formation | Semi-Married Pairs |
Fleet numbers | 7750–7859 |
Capacity | 44 |
Operators | New York City Subway |
Specifications | |
Car body construction | LAHT carbon steel |
Car length | 51.04 ft (15.56 m) |
Width | 8.75 ft (2,667 mm) |
Height | 11.86 ft (3,615 mm) |
Doors | 6 sets of 50 inch wide side doors per car |
Maximum speed | 55 mph (89 km/h) |
Weight | 70,000 lb (32,000 kg) (post-rebuild) |
Traction system | General Electric 17KG192B1 (7804–7859 formerly Westinghouse) |
Traction motors | General Electric 1257F1 or Westinghouse 1447J |
Power output | 115 hp (86 kW) |
Electric system(s) | 600 V DC Third rail |
Current collector(s) | Contact shoe |
Braking system(s) | WABCO, "SMEE" (electrodynamic) |
Coupling system | H2C |
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge |
The R26 was a New York City Subway car model built by American Car and Foundry from 1959 to 1960 for the IRT A Division. A total of 110 cars were built, arranged in married pairs.
The R26s entered service on October 12, 1959, and received air conditioning by 1982. The fleet was rebuilt by Morrison–Knudsen between 1985 and 1987. The R26s were replaced in 2001 and 2002 with the delivery of the R142 and R142A cars, with the last train running on October 7, 2002. After being retired, most R26s were sunk into the ocean as artificial reefs, but two cars have survived.
The R26s were numbered 7750–7859. They were the first cars not to be built with operating cabs at both ends.
The even-numbered car carried the motor generator and battery set for electrical equipment, while the odd-numbered car held air compressor for the brakes. A special version of the H2C coupler was used to link the cars, so they could easily be split if needed, and thus, they were called "semi-permanent pairs". Only the No.1 end had the operator controls. The No.2 end had conductor controls only. Although referred to as the "blind end", these ends did have windows for the conductor.
The R26s were the first cars to use single, sealed storm windows since the R14s, and pink colored-molded hard fiberglass seats. The hard fiberglass seats would become standard seating from this order onward for all new cars purchased to cut down on vandalism, reduce maintenance costs, etc.
The R26s wore several paint schemes during their service lives. The cars were delivered in a dark olive green paint scheme similar to the R21s and R22s. In 1970–1975, the R26s were repainted into the MTA corporate silver and blue scheme. [1] In 1982–1983, the R26s were repainted full white (roof, bonnets, and sides were all painted white) in an attempt to combat graffiti. [2] During rebuilding by Morrison–Knudsen at Hornell, New York, from 1985 to 1987, the R26s were repainted into Redbirds with a deep maroon red body, black front bonnets and anti-climbers, and a silver roof.
The first set of R26s was delivered in July 1959 [3] and placed in service on the 6 train on October 12, 1959. By early 1960, all cars have been delivered. [4] Since delivered, the R26s have been assigned exclusively to the 6 until February 16, 1966, when all of the GE cars were moved to the 2, 4, and 5.
The R26s were removed from the 4 in October 1976, and the GE cars were assigned to the 2 and 5. The Westinghouse R26s were assigned exclusively to the 6, except from June 23, 1980, to August 1981, when cars 7844–7845 and 7858 (mated to R28 7861) were assigned to the 7.
In January 1983, the R26s were removed from the 5, and the GE cars were assigned exclusively to the 2. From May to June 1983, Westinghouse R26s 7844–7845 were returned to the 7 to fill in for the R33Ss and "World's Fair" R36s while they were being rebuilt. On September 30, 1983, the Westinghouse cars made a second return to the 7 with cars 7804–7823 being assigned there to fill in for the R33Ss and "World's Fair" R36s while they were being rebuilt. On November 18, 1983, Westinghouse R26s 7814–7823 returned from the 7 to the 6, followed by 7804–7813 in February 1984. [5]
By 1982, all cars in this series had received air conditioning as part of a retrofitting program to replace their original Axiflow ceiling fans.
The R26s were rebuilt by Morrison–Knudsen in Hornell, New York between 1985 and 1987, and were repainted as Redbirds. All Westinghouse cars were refitted with GE equipment.
Before they were rebuilt, the R26 cars were grouped as follows:
Beginning in Summer 1985, the first un-rebuilt General Electric R26s were removed from service for rebuilding. By Summer 1986, the last un-rebuilt GE R26s were removed from the 2 service. The first Westinghouse cars were sent to be rebuilt in March 1986, and by December 1986, the last R26s were removed from service on the 6 to be sent out for rebuilding. [6] The first rebuilt R26s entered service on the 2 on January 13, 1986. By March 19, 1987, all rebuilt cars were in service. [7]
After rebuilding, all R26s were assigned exclusively to the 2 until May 1995, when all cars were moved to the 5 to improve fleet reliability. [8]
The R26s retained their original H2C couplers on both ends until 1991, when the new Scheduled Maintenance System (SMS) program began. During this time, the R26s were mated numerically and the original H2C couplers on the ends with conductor's controls were replaced with link bars. Prior to 1991, the R26s were often not numerically paired and could also be paired to R28s. [9] [10]
As time wore on, heavy service took their toll on these cars. In 1996, New York City Transit Authority announced their plans to phase out the Redbirds with the R142 and R142A fleets, replacing the entire R26 fleet.
Starting in May 2001, the R33s were displaced from the 2 to the 5 as the R142s entered service on the 2, gradually replacing the R26s. The last two pairs, 7818–7819 and 7846–7847, along with the last of the R28s and one pair of R29s, [11] made their final trip on the 5 on October 7, 2002. [12] After retirement, all but one pair were stripped to help create the Redbird Reef.
In 2002, cars 7770–7771 became school cars at Canarsie Yard. This pair was moved to East New York Yard in September 2006 and continued as school cars there. [13] Then, the pair was moved to 207th Street Yard during the weekend of March 21–22, 2009, in preparation for reefing. [14] The pair was finally reefed on September 6, 2009. [15]
Today, cars 7774–7775 are currently the only surviving R26s. This pair was previously stored at the Unionport Yard until July 2013, when they were moved to the Concourse Yard, along with R28s 7924–7925 and R29s 8678–8679.
The R32 was a New York City Subway car model built by the Budd Company from 1964 to 1965 for the IND/BMT B Division. A total of 600 R32s were built, numbered 3350–3949, though some cars were re-numbered. The R32 contract was divided into two subcontracts of 300 cars each: R32 and R32A ; the former was paid by the city's capital budget and the latter was paid through a revenue bond. All were arranged as married pairs.
The R44 is a New York City Subway car model built by the St. Louis Car Company from 1971 to 1973 for the B Division and the Staten Island Railway (SIR). The cars replaced many R1-R9 series cars, and all remaining 1925 Standard Steel built SIRTOA ME-1 trains, providing Staten Island with a new fleet of railcars. The R44 fleet originally consisted of 352 cars, of which 57 remain in service, all on the Staten Island Railway.
The R42 was a New York City Subway car model built by the St. Louis Car Company between 1969 and 1970 for the IND/BMT B Division. There were 400 cars in the R42 fleet, numbered 4550–4949. It was the last 60-foot (18.29 m) B Division car built for the New York City Subway until the R143 in 2001, and the last car model class to be built in married pairs.
The New York City Subway is a large rapid transit system and has a large fleet of rolling stock. As of November 2016, the New York City Subway has 6418 cars on the roster.
Redbird trains were eight New York City Subway train models so-nicknamed because of their red paint. The Redbirds totaled 1,410 cars of the following types on the A Division lines: R26, R28, R29, R33, R33S, and R36. There were also 550 cars on the B Division lines: R27 and R30/A. All were built by the American Car and Foundry Company and the St. Louis Car Company.
The R33S was a New York City Subway car that was built by St. Louis Car Company in 1963 for the IRT A Division. They were purchased for service on the IRT Flushing Line, which was the closest line to the 1964 New York World's Fair. A total of 40 cars were built, arranged as single cars. While in regular service, each R33S was coupled to five two-car consists of R36 cars to make 11-car trains for the 7 and <7> routes.
The R36 was a New York City Subway car model built by the St. Louis Car Company from 1963 to 1964. The cars are a "follow-up" or supplemental stock to the A Division's R33s, which some of the cars closely resemble. A total of 424 cars were built, arranged in pairs. The order includes World's Fair cars comprising 390 cars, and Main Line cars comprising 34 cars.
The R10 was the first series of post-war New York City Subway cars. They were built by the American Car and Foundry Company from 1948 to 1949 for the IND/BMT B Division. A total of 400 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars. The R10s introduced many innovations, including an all-welded low-alloy high tensile (LAHT) steel construction, dynamic braking, improved propulsion, and various cosmetic features.
The R12 was a New York City Subway car built by the American Car and Foundry Company in 1948. A total of 100 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R21 was a New York City Subway car built by St. Louis Car Company from 1956 to 1957 for the IRT A Division. A total of 250 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R33 was a New York City Subway car model that was built by St. Louis Car Company in 1962 and 1963. The cars are a "follow-up" or supplemental stock for the A Division's R29s and closely resemble them. The cars were also referred to as R33MLs to distinguish them from the R33Ss. A total of 500 cars were built, numbered 8806–9305, and arranged in pairs.
The R27 was a New York City Subway car model built by the St. Louis Car Company from 1960 to 1961 for the IND/BMT B Division. A total of 230 cars were built, arranged in married pairs. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R30 was a New York City Subway car model built by St. Louis Car Company from 1961 to 1962. The cars were a "follow-up" or supplemental stock for the B Division's R27s and closely resembled them. A total of 320 cars were built, arranged in married pairs. Three versions were manufactured: Westinghouse (WH)-powered cars, General Electric (GE)-powered cars, and R30As.
The R14 was a New York City Subway car model built by the American Car and Foundry Company in 1949. The cars were a "follow-up" or supplemental stock for the A Division's R12s and look exactly the same, differing only in floor patterns. A total of 150 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R15 was a New York City Subway car model built by the American Car and Foundry Company in 1950 for the IRT A Division. A total of 100 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R17 was a New York City Subway car model built by the St. Louis Car Company in 1954 for the IRT A Division. A total of 400 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R22 was a New York City Subway car built by the St. Louis Car Company from 1957 to 1958. The cars were a "follow-up" or supplemental stock for the A Division's R21s and closely resemble them. A total of 450 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars.
The R28 was a New York City Subway car model built by American Car and Foundry (ACF) from 1960 to 1961. The cars were a "follow-up" or supplemental stock for the A Division's R26s and closely resemble them. The average car cost per R28 was $114,495. A total of 100 cars were built, arranged in married pairs.
The R29 was a New York City Subway car model built by the St. Louis Car Company in 1962 for the IRT A Division. A total of 236 cars were built, arranged in married pairs.
Jackson & Woodin Manufacturing Company, also called Jackson & Woodin Car Works, was an American railroad freight car manufacturing company of the late 19th century headquartered in Berwick, Pennsylvania. In 1899, Jackson and Woodin was merged with twelve other freight car manufacturing companies to form American Car & Foundry Company. Jackson and Woodin's management were proponents of the temperance movement in America, and went as far as buying all the saloons and hotels in Berwick, leading to Berwick becoming a dry town by 1881. By the time of the 1899 merger that created American Car and Foundry Company (ACF), Jackson & Woodin was the largest freight car manufacturer in the eastern United States. The Jackson & Woodin shops became ACF's Berwick Plant, a plant that was heavily used by ACF.
{{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link){{cite web}}
: CS1 maint: archived copy as title (link)