Royalex

Last updated

Royalex was a composite material, comprising an outer layer of vinyl and hard acrylonitrile butadiene styrene plastic (ABS) and an inner layer of ABS foam. The layers are bonded by heat treatment. [1] It was used to manufacture durable, mid-priced canoes. Its supplier closed out production of the material in 2014.

Contents

Development

Royalex is basically a board comprising a 'sandwich' of standard rigid ABS sheets in the core of which is an ABS layer designed to foam/expand during the heating stage prior to vacuum forming. Thus Royalex can be designed to form virtually any finished thickness to suit the end application. One just adds extra sheets. Since ABS has a poor resistance to UV a thin outer layer of UV resistant vinyl is generally included. This can be self-coloured or painted.

ABS is a copolymer of rubber and thermoplastic: Acrylonitrile, butadiene, styrene. It was developed at US Rubber Co's Chicago plant by Bob Pooley and was simply called Royalite. US Rubber was later renamed Uniroyal - a blanket name to encapsulate their worldwide enterprises, which previously had separate names. Later, Bob Pooley and associates continued work on Royalite to introduce a foaming/expandable element. This was accomplished at the Uniroyal plant in Warsaw, Indiana. The resulting product was named Royalex to recognise the expanding core.

Although extremely versatile as well as being very tough, the material was expensive compared to available alternatives. Even so, many industries were attracted to evaluate Royalex. Items produced included Caravans (vacuum formed in two halves) the top was a mirror image of the base so that only one forming tool was required. White Motors introduced a limited run of tractor cabs. A company was formed to produce a repro of the famous 'Coffin nosed' Cord Deusenberg.

Gene Bordinat, Chief Designer at Ford designed a concept car in Royalex in 1965. This resulted in the 'Ford XP Bordinat Cobra'. The writer brought both of these cars to London, England to show at the International Plastics Exhibition and for exposure to the then extensive automotive producers.

Royalex was extremely tough but if hit hard enough could be dented. If this happened such dents could be recovered by applying a hand held hot air gun which re-expanded the core to blow out the dent. The cost, as well as the need to accost a different build technique when using Royalex, mitigated against its acceptance in large scale production and eventually simple canoe bodies became the main product. An additional reason was that following the breakup of the Uniroyal empire, product specialists were lost and there was no longer a team to drive the concept.

Royalex was developed by Uniroyal in the 1970s. [2] In 2000 the Spartech Corporation took over the Uniroyal Royalex Manufacturing Division and secured the rights to manufacture Royalex at their factory in Warsaw, Indiana. [3] In 2013, plastics company PolyOne, of Avon Lake, Ohio purchased Spartech, and decided to shut down Royalex production due to its low volume. The last sheets of Royalex were shipped from the factory in December, 2013. [2] Production will be shut down in April 2014. [4] If another manufacturer does not emerge, existing Royalex canoes in retail outlets may be sold out by 2015. [4] Equivalent materials for canoemakers do not exist as of January 2014. [2]

T-Formex, an equivalent to Royalex, has been developed and is manufactured by the canoe manufacturer Esquif. [5] Canoes in the material are available from Esquif and several other manufacturers, including Swift [6] and Wenonah. [7]

Uses

A whitewater canoeist paddling a Roxalex canoe. Marty Plante - Hudson Gorge - 2022 (2).jpg
A whitewater canoeist paddling a Roxalex canoe.

The best known use of Royalex is for the manufacture of canoe hulls. Royalex is lighter, more resistant to UV damage from sunlight, more rigid and has greater structural memory than non-composite plastics used for this purpose, such as polyethylene. It is also quieter and more user friendly in cold or hot conditions than aluminium, described by canoeist Kent Ford as "noisy, heavy and hot. "Royalex was soft, quiet and slippery on rocks, and not too heavy if you kept the gunwales light,” according to Kent Ford. " [8] Royalex canoes are, however, more expensive than aluminium canoes or canoes made from traditionally molded or roto-molded polyethylene hulls.

Royalex cannot be made as light as fiber-reinforced composites made with Kevlar or carbon fiber, and therefore less suited for high-performance paddling. However, Royalex is cheaper than Kevlar or carbon fiber, with better durability on rocky rivers. [2]

Related Research Articles

<span class="mw-page-title-main">Petrochemical</span> Chemical product derived from petroleum

Petrochemicals are the chemical products obtained from petroleum by refining. Some chemical compounds made from petroleum are also obtained from other fossil fuels, such as coal or natural gas, or renewable sources such as maize, palm fruit or sugar cane.

<span class="mw-page-title-main">Canoe</span> Light boat that is paddled

A canoe is a lightweight narrow water vessel, typically pointed at both ends and open on top, propelled by one or more seated or kneeling paddlers facing the direction of travel and using paddles. In British English, the term canoe can also refer to a kayak, while canoes are then called Canadian or open canoes to distinguish them from kayaks. However, for official competition purposes, the American distinction between a kayak and a canoe is almost always adopted.

<span class="mw-page-title-main">Polystyrene</span> Polymer resin widely used in packaging

Polystyrene (PS) is a synthetic polymer made from monomers of the aromatic hydrocarbon styrene. Polystyrene can be solid or foamed. General-purpose polystyrene is clear, hard, and brittle. It is an inexpensive resin per unit weight. It is a poor barrier to air and water vapor and has a relatively low melting point. Polystyrene is one of the most widely used plastics, with the scale of its production being several million tonnes per year. Polystyrene is naturally transparent, but can be colored with colorants. Uses include protective packaging, containers, lids, bottles, trays, tumblers, disposable cutlery, in the making of models, and as an alternative material for phonograph records.

<span class="mw-page-title-main">Acrylonitrile butadiene styrene</span> Thermoset polymer

Acrylonitrile butadiene styrene (ABS) (chemical formula (C8H8)x·​(C4H6)y·​(C3H3N)z ) is a common thermoplastic polymer. Its glass transition temperature is approximately 105 °C (221 °F). ABS is amorphous and therefore has no true melting point.

<span class="mw-page-title-main">Lamination</span> Technique of fusing layers of material

Lamination is the technique/process of manufacturing a material in multiple layers, so that the composite material achieves improved strength, stability, sound insulation, appearance, or other properties from the use of the differing materials, such as plastic. A laminate is a permanently assembled object created using heat, pressure, welding, or adhesives. Various coating machines, machine presses and calendering equipment are used.

<span class="mw-page-title-main">Elastomer</span> Polymer with rubber-like elastic properties

An elastomer is a polymer with viscoelasticity and with weak intermolecular forces, generally low Young's modulus (E) and high failure strain compared with other materials. The term, a portmanteau of elastic polymer, is often used interchangeably with rubber, although the latter is preferred when referring to vulcanisates. Each of the monomers which link to form the polymer is usually a compound of several elements among carbon, hydrogen, oxygen and silicon. Elastomers are amorphous polymers maintained above their glass transition temperature, so that considerable molecular reconformation is feasible without breaking of covalent bonds. At ambient temperatures, such rubbers are thus relatively compliant and deformable. Their primary uses are for seals, adhesives and molded flexible parts.

<span class="mw-page-title-main">Wood–plastic composite</span> Composite materials made of wood fiber and thermoplastics

Wood-plastic composites (WPCs) are composite materials made of wood fiber/wood flour and thermoplastic(s) such as polythene (PE), polypropylene (PP), polyvinyl chloride (PVC), or polylactic acid (PLA).

Ultra-high-molecular-weight polyethylene is a subset of the thermoplastic polyethylene. Also known as high-modulus polyethylene (HMPE), it has extremely long chains, with a molecular mass usually between 3.5 and 7.5 million amu. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made.

<span class="mw-page-title-main">Polybutadiene</span> Type of synthetic rubber formed from the polymerization of butadiene

Polybutadiene [butadiene rubber BR] is a synthetic rubber. Polybutadiene rubber is a polymer formed from the polymerization of the monomer 1,3-butadiene. Polybutadiene has a high resistance to wear and is used especially in the manufacture of tires, which consumes about 70% of the production. Another 25% is used as an additive to improve the toughness of plastics such as polystyrene and acrylonitrile butadiene styrene (ABS). Polybutadiene rubber accounted for about a quarter of total global consumption of synthetic rubbers in 2012. It is also used to manufacture golf balls, various elastic objects and to coat or encapsulate electronic assemblies, offering high electrical resistivity. Polybutadiene is typically crosslinked with sulphur, however, it has also been shown that it can be UV cured when bis-benzophenone additives are incorporated into the formulation.

<span class="mw-page-title-main">Microcellular plastic</span>

Microcellular plastics, otherwise known as microcellular foam, is a form of manufactured plastic fabricated to contain billions of tiny bubbles less than 50 microns wide. It is formed by dissolving gas under high pressure into various polymers, relying on the phenomenon of thermodynamic instability to cause the uniform arrangement of the gas bubbles, otherwise known as nucleation. Its main purpose was to reduce material usage while maintaining valuable mechanical properties. the density of the finished product is determined by the gas used. Depending on the gas, the foam's density can be between 5% and 99% of the pre-processed plastic. Design parameters, focused on the foam's final form and the molding process afterward, include the type of die or mold to be used, as well as the dimensions of the bubbles, or cells, that classify the material as a foam. Since the cells' size is close to the wavelength of light, to the casual observer the foam retains the appearance of a solid, light-colored plastic.

<span class="mw-page-title-main">Engineering plastic</span> Plastics often used for making mechanical parts

Engineering plastics are a group of plastic materials that have better mechanical and/or thermal properties than the more widely used commodity plastics.

Nitrile rubber, also known as nitrile butadiene rubber, NBR, Buna-N, and acrylonitrile butadiene rubber, is a synthetic rubber derived from acrylonitrile (ACN) and butadiene. Trade names include Perbunan, Nipol, Krynac and Europrene. This rubber is unusual in being resistant to oil, fuel, and other chemicals.

<span class="mw-page-title-main">Sailcloth</span> Strong fabric of the type used to make ships sails

Sailcloth is cloth used to make sails. It can be made of a variety of materials, including natural fibers such as flax, hemp, or cotton in various forms of sail canvas, and synthetic fibers such as nylon, polyester, aramids, and carbon fibers in various woven, spun, and molded textiles.

<span class="mw-page-title-main">Styrene-acrylonitrile resin</span> Chemical compound

Styrene acrylonitrile resin is a copolymer plastic consisting of styrene and acrylonitrile. It is also known as SAN. It is widely used in place of polystyrene owing to its greater thermal resistance. The chains of between 70 and 80% by weight styrene and 20 to 30% acrylonitrile. Larger acrylonitrile content improves mechanical properties and chemical resistance, but also adds a yellow tint to the normally transparent plastic.

LG Chem Ltd., often referred to as LG Chemical, is the largest Korean chemical company and is headquartered in Seoul, South Korea. It was the 9th largest chemical company in the world by sales in 2021. It was first established as the Lucky Chemical Industrial Corporation, which manufactured cosmetics. It is now solely a business-to-business company.

Rubber toughening is a process in which rubber nanoparticles are interspersed within a polymer matrix to increase the mechanical robustness, or toughness, of the material. By "toughening" a polymer it is meant that the ability of the polymeric substance to absorb energy and plastically deform without fracture is increased. Considering the significant advantages in mechanical properties that rubber toughening offers, most major thermoplastics are available in rubber-toughened versions; for many engineering applications, material toughness is a deciding factor in final material selection.

<span class="mw-page-title-main">Unitika</span>

Unitika Ltd is a Japanese company based in Osaka. Primarily, the company produces various textiles, glass, plastics, and carbon fiber products. They are also known for their films, which are used in consumer products like athletic apparel and food packaging.

<span class="mw-page-title-main">Kumho Petrochemical</span> South Korean multinational chemical company

Kumho Petrochemical Co., Ltd. is a multinational chemical company based in South Korea, with headquarters in Seoul. It was founded in 1970 when Kumho Group struggled to secure raw materials for its bus and tire businesses. Kumho Petrochemical has a global market leadership in the manufacturing of synthetic rubbers with the world's largest production capacity based on SBR and BR by IISRP 2012. It focuses on synthetic rubbers, synthetic resins, specialty chemicals, electronic chemicals, energy, building materials and advanced materials as its core business.

<span class="mw-page-title-main">Acrylonitrile styrene acrylate</span> Chemical compound

Acrylonitrile styrene acrylate (ASA), also called acrylic styrene acrylonitrile, is an amorphous thermoplastic developed as an alternative to acrylonitrile butadiene styrene (ABS), but with improved weather resistance. It is an acrylate rubber-modified styrene acrylonitrile copolymer. It is used for general prototyping in 3D printing, where its UV resistance and mechanical properties make it an excellent material for use in fused filament fabrication printers, particularly for outdoor applications like weather station radiation shields for environmental sensors. It is also widely used in the automotive industry.

<span class="mw-page-title-main">Kaneka Corporation</span> Japanese chemical manufacturing company

Kaneka Corporation is a Japanese international chemical manufacturing company based in Osaka. The company was founded in 1949 and produces chemical products such as functional resin, foam resin, and synthetic fibers.

References

  1. "Royalex (RX)" . Retrieved 20 November 2010.
  2. 1 2 3 4 Chaney, Rob (2014-01-22). "Canoe-makers losing key material for molding boats". The Missoulian. Retrieved 2014-01-23.
  3. "Plastics and Whitewater Boats" . Retrieved 20 November 2010.
  4. 1 2 "Royalex: Dead In The Water: Revolutionary 35-year-old boat material bites the dust". Rapid Media Whitewater: 2014 Paddling Buyer’s Guide. Retrieved 2014-01-23.
  5. "T-Formex: The Ultimate Material For Rugged Canoes". Esquif company site. Retrieved 21 September 2018.
  6. "Swift River Touring Canoes". Swift company canoe catalog. Retrieved 21 September 2018.
  7. "What is the difference - Aluminum, Fiberglass or Kevlar®?". Wenonah company FAQ.
  8. Buchanan, Eugene (2013-08-15). "Hasta Luego, Royalex Canoe". Canoe & Kayak magazine. Retrieved 2014-01-23.