Sisu KB-112 and KB-117 | |
---|---|
Overview | |
Manufacturer | Oy Suomen Autoteollisuus Ab [1] |
Also called | Jyry-Sisu [2] |
Production | KB-112: 1962–1969 KB-117: 1964–1969 |
Assembly | Karis, Finland |
Body and chassis | |
Body style | forward control [1] |
Layout | KB-112: 6×2 KB-117: 4×2 [3] |
Powertrain | |
Engine | Leyland 0.680 11.1-litre L6 |
Transmission | ZF, 6-speed, non-synchronised [1] |
Dimensions | |
Wheelbase | KB-112: 4 500 mm + 1 200 mm [4] |
Length | KB-112: 9 250 mm [2] [4] |
Width | 2 500 mm [4] |
Kerb weight | KB-112: 7 300 kg [4] |
Chronology | |
Successor | Sisu M-series |
Sisu KB-112 is a three-axle lorry made by the Finnish heavy vehicle manufacturer Suomen Autoteollisuus (SAT) from 1962 though 1969. The vehicle was equipped with a technically advanced tiltable cabin. A two-axle variant, the KB-117, was produced from 1964 through 1969. Both versions were only produced in small numbers. [1]
The KB-112 and KB-117 were followed by the Sisu M-series. [1]
International road transportation grew heavily in the 1960s. The shortest way from Finland to Central and Western Europe was over the Baltic Sea. However, as sea transportation of vehicles was not developed enough yet, the Finnish lorries often drove to Central Europe through Scandinavia, driving around the sea through Haparanda. The conventional long-nosed vehicles available at the time were not sufficient for a such long time travelling. The only way to sleep in the cabin was on the floor, next to the gear lever. [1]
Short-nosed vehicles were common in the UK due to local restrictions of vehicle length. These vehicles were noticed by Finnish Sisu drivers, who asked SAT for a COE vehicle which would help to maximise the load area and have proper space for a driver's bed. [1]
The design of a short-nosed vehicle was not significant step for SAT, as the company had previously designed for the state the KB-102/KB-107 models with a fixed cabin over engine. As a small manufacturer, SAT listened carefully to the signals from its customers. The company set a new project with an urgent status for a modern, state-of-the-art COE model. The main goal was to ensure easy access to the engine for maintenance and repairs. The cabin was a simple design, but it was furnished with a proper bed placed behind the seats, and making it tiltable enabled straightforward service. [1] Cabin ergonomics, primarily the driving position and instrument panel layout, were developed based on interviews of more than one hundred lorry drivers. [2]
The KB-112 was the first European serial produced lorry with a hydraulically tiltable cabin. [5] [6]
The first KB-112 lorries were produced and tested in 1962 [1] and handed over to W. Rosenlew & Co. Oy in January 1963 [1] [2] in a special ceremony, in which representatives of the press were present. SAT advertised that it had developed a COE vehicle in which all the positive attributes of the arrangement were kept whereas the negative ones were eliminated. The Rosenlew representative, Mr. A. Vaarne, told that compared to a conventional cabin with a bed inside the new cabin type enabled a 3 m2 larger load area within the limits of the contemporary legislation. [2] The vehicles transported timber from Seikku sawmill to Mäntyluoto harbour in Pori. [1]
The two-axle KB-117, already with a stronger engine, entered market in 1964. SAT ceased to offer KB models in 1969; however, it is possible that some vehicles were made by special request.[ citation needed ] The new M-series took the place of them in 1970. There are no exact records about the total quantity produced but it is estimated to be between 50 and 70 units. [1]
The original engine was a six-cylinder inline diesel Leyland O.680 with a displacement of 11.1 litres and an output of 165 horsepower (SAE). The models with this engine could be recognised from model name extension SP. The two-axle version came to market with a stronger engine as KB-117 BP; BP indicates the stronger PowerPlus version of the same engine type with a 210-horsepower output. Later a turbocharged variation of the latter model was added in the selection; the engine code was then BPT. [1]
The clutch is pneumatically operated. [6] The gearbox is a non-synchronised six-speed ZF. In addition, the driven rear axle is equipped with an integrated two-speed reduction gear system. [1] The tyre size is 11.00-20". [4] At least one KB-112 logging vehicle, made for A. Ahlström, was equipped with Sisu Nemo hydraulic transmission system for trailers. [7]
The steel cabin is mounted over the engine. [2] It is hinged from its front end and can be tilted forward in 20 seconds by a hydraulic system operated by a hand pump. There are seats for the driver and one passenger. The steering wheel can be adjusted in range of 7 cm forward and backward. The 220 cm wide cabin is equipped with a full-length and 50 cm wide bed placed behind the seats [1] and fastened to the chassis at three points. The instrumentation includes an electrically operated speedometer and a tachometer. [2]
The total weight of KB-112 is 17.5 tonnes [3] and with a fully loaded trailer 30 tonnes. The turning radius of 8.4 metres is, according to SAT, two metres smaller compared to an equivalent vehicle with a conventional cabin. [2]
The total weight of KB-117 is 12.5 tonnes. [3]
One KB-117 BP is fully restored. As of 2010 it is the only known specimen of its kind in the Finnish vehicle register. [1]
Oy Sisu Auto Ab is a truck manufacturer based in Raseborg, Finland. Its name comes from the Finnish word sisu meaning guts, grit and determination.
The Patria Pasi is a military armoured personnel carrier. It was the choice of the Finnish Defence Forces to replace its aging Soviet BTR-60s. It was a result of the commercial competition between two Finnish companies, a tractor manufacturer Valmet and the lorry manufacturer Sisu, which won the contract with its prototype.
Sisu SA-150 is a medium-size, two-axle off-road lorry made by the Finnish heavy vehicle manufacturer Oy Sisu-Auto Ab from 1982 until 1991. The four-wheel-drive lorry with load capacity of 6,400 kg was developed for pulling of heavy cannons of the Finnish Defence Forces.
Sisu SA-110 is a prototype of a light two-axle off-road lorry made by the Finnish heavy vehicle manufacturer Oy Sisu-Auto Ab in 1986. Total six pieces were made. The vehicle was partly armoured.
Veikko Muronen was a Finnish MSc (diplomi-insinööri) and heavy vehicle designer. He worked as a manager of the Engineering Department of Vanajan Autotehdas (VAT) and later Suomen Autoteollisuus (SAT). Muronen is best known as the inventor of Vanaja lifting tandem system and designer of the last Vanaja series, "Muros-Vanaja".
Vanajan Autotehdas Oy (VAT) was a producer of heavy vehicles based in Hämeenlinna, Finland. The company was founded as Yhteissisu Oy in 1943 by the Finnish government and a number of major Finnish companies with the aim of producing lorries and buses for the Finnish Defence Forces. World War II was over before the company could start series production; it was renamed Vanajan Autotehdas and the marque became Vanaja. Subsequently, the production consisted of outdated lorry models, partly built from military surplus materials. After overcoming initial difficulties, the company modernised its products, became profitable and grew until the mid-1950s. Many major components, including engines, were imported. Diesel engines became widely available in 1955, and in 1959 VAT introduced its most significant innovation, the full load lifting tandem axle mechanism, which improved off-road capability significantly; the system is now used in Sisu vehicles.
Sisu SA-240 is a heavy off-road lorry made by the Finnish heavy vehicle manufacturer Oy Sisu-Auto Ab from 1984 until 1991. The six-wheel drive lorry with payload of 12,000 kg was developed for pulling of heavy cannons of the Finnish Defence Forces.
Sisu A-45 is a light off-road lorry made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1970–1982. The two-axle, all-wheel-drive vehicle with payload of 4 150 kg was a further development of Sisu KB-45, that was originally developed after an assignment of the Finnish Defence Forces.
Sisu KB-45 is a light off-road lorry made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1965–1970. The two-axle, all-wheel-drive vehicle with payload of 4,000 kg was developed after an assignment of the Finnish Defence Forces. It was followed by almost identical A-45/AH-45 in 1970.
Sisu KB-46 is a prototype of a three-axle, six-wheel-driven off-road lorry made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1968. Its capacity is three tonnes and it was produced after an assignment of the Finnish Defence Forces to tow heavy cannons.
Sisu K-44 is a three-axle 4×4+2 driven lorry made by the Finnish heavy vehicle manufacturer Suomen Autoteollisuus (SAT) from 1959 to 1965. The most usual applications were for log transportation and earth moving vehicles. The K-44 was noted for its excellent gradient capabilities. The legally permissible maximum vehicle payload was between 7 800 and 11 750 kg: with a trailer this increased to 20 000 kg. The K-44s were powered by Leyland diesel engines with power outputs of between 85.8 and 156.7 kW.
Erik Paul Oskar GillbergMSc (diplomi-insinööri) was a Finnish engineer, businessman and vuorineuvos.
Sisu S-21 is a lorry first produced by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT), then under names Sisu S-22 and S-22K by Yhteissisu, which, after changing its name Vanajan Autotehdas (VAT), produced it with name Vanaja V-48. The production period was 1943–1955.
Sisu K-50SS is a six-wheel-driven ballast tractor made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT). The vehicle can generate a 388 kN drawing force and it was used for pulling flatbed trailers.
Sisu M-series is a 2–4-axle forward control lorry model series made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1969–1984. The series consists of 4×2-driven M-161, 6×2-driven M-162, 6×4-driven M-163 and 8×2-driven M-168. Typical applications were logging trucks, tankers and long-distance transportation haulers which pulled conventional and semi-trailers. The permissible payloads varied from ca. 9 tonnes up over 18 tonnes.
Sisu Nemo is a hydraulic radial piston motor type developed and initially produced by Suomen Autoteollisuus (SAT). The system was patented in 1961.
Sisu S-321, S-322 and S-323 is the first lorry and bus model series made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1932–1934. Upgraded models S-341 and S-342 were produced in 1934. The vehicles were heavily based on Volvo components. The two-axle, 4×2-driven lorries were designated with 2,500 kg capacity and total weight of 4,800 kg.
Sisu KB-24 is a two-axle lorry and special vehicle chassis made by the Finnish heavy vehicle manufacturer Suomen Autoteollisuus (SAT) from 1955 to 1960. It is a six-tonne delivery lorry planned to operate on narrow streets in Finnish cities.
Sisu R-series is a 2–3-axle lorry model series made by the Finnish heavy vehicle producer Suomen Autoteollisuus (SAT) in 1970–1982. The series consists of 4×2-driven R-141 and R-148, 6×2-driven R-142, 6×4-driven R-143 and R-149, 4×4-driven R-144, 4×4+2-driven R-145 and 6×6-driven R-146. Typical applications are logging trucks, dumper trucks and long-distance transportation haulers which pull conventional and semi-trailers.
Sisu KB-124 was a two-axle lorry and special vehicle chassis made by the Finnish heavy vehicle manufacturer Suomen Autoteollisuus (SAT). It was a six-tonne delivery lorry which was developed to follow the KB-24. The KB-124 was produced from 1961 until 1968, when it was replaced by the similar KB-121 with increased permitted load. Production ceased in about 1972.