This 1918 montage from Seattle magazine The Town Crier shows the SS West Mahomet, with inset portraits of company vice president Henry G. Seaborn and founders D.E. Skinner and John W. Eddy (left to right at top) and general manager David Rodgers (below).
The Skinner & Eddy Corporation, commonly known as Skinner & Eddy, was a Seattle, Washington-based shipbuilding corporation that existed from 1916 to 1923. The yard is notable for completing more ships for the United States war effort during World War I than any other American shipyard, and also for breaking world production speed records for individual ship construction.
In total, the company built 75 ships—72 cargo ships and three oil tankers—from 1916 to 1920, including 32 completed for the Emergency Fleet Corporation during the war. The yard was closed in 1921 as a result of the severe postwar shipbuilding slump. Skinner & Eddy later became a shipping line operator, and appears to have been wound up in the early 1970s.
The Skinner & Eddy Corporation was founded in January 1916 by two entrepreneurs, David E. "D.E." Skinner and John W. Eddy, owners of the Port Blakely Mill Company since 1903.[1] Shortly after its establishment on the downtown Seattle waterfront47°35′25″N122°20′22″W / 47.5902°N 122.33941°W / 47.5902; -122.33941,[2] Skinner & Eddy Corp. began leasing the shipyard of the Seattle Construction and Drydock Company (at the time a subsidiary of Todd Shipbuilding), located a few steps north between Connecticut and Dearborn Street. Seattle Construction & Dry Dock was itself a successor to the Moran Brothers shipyard, which around the start of the 20th century had been one of America's largest shipyards, responsible for building Seattle's first battleship, USSNebraska, in 1906.[3]
On April 6, 1917, 15 months after Skinner and Eddy Corp. began leasing the yard, the United States entered World War I. Skinner & Eddy responded to the news by purchasing an additional 15 acres (61,000m2) of Seattle waterfront property from the Seattle Dock Company and the Centennial Flouring Mill for $1,500,000 and $600,000 respectively, which they used to begin building a second shipyard, which became known as Plant No. 2 and lay just south of plant No. 1. After securing lucrative contracts from the Emergency Fleet Corporation for the construction of merchant ships for the war effort, Skinner & Eddy was also able in June 1918 to make an outright purchase of the yard of Seattle Construction and Dry Dock, which was named Plant No. 1.[3]
Facilities
When completed, Skinner & Eddy's facilities included ten building slipways—five at each Plant—and four outfitting docks. A five-section, 459-foot (140m)drydock capable of servicing vessels of up to 15,000 tons was also acquired, along with a 50-ton floating crane.[4]
Most of the ships built by the company during the war were constructed at Plant No. 1,[5] as Plant No. 2 was still under construction for much of this period. With its two plants, which together covered about 57 acres (230,000m2) of waterfront property,[4] Skinner & Eddy was Seattle's largest shipbuilding company, at its wartime peak employing about 13,500 people.[4]
World War I
Launch of the freighter Stolt Nielson from the Skinner & Eddy yard on 22 May 1917
The first seven ships built by Skinner & Eddy were for private contractors. The company completed its first ship, Niels Nielson, on November 9, 1916, and had completed a further two by the time the United States entered the war in April 1917. These three ships along with four partially completed vessels were then requisitioned for war service by the newly created United States Shipping Board (USSB). Thereafter, Skinner & Eddy was to build ships exclusively for the USSB, through the latter's agency, the Emergency Fleet Corporation (EFT).[6]
Skinner & Eddy soon began to distinguish itself by its production speed. Prior to its operations, a cargo ship built and delivered in the United States in under 250 days was considered fast,[7] but as early as June 1917, the company under the capable direction of its general manager, David Rodgers, completed a freighter, Stolt Nielson, in under 150 days.[5] In November 1917, the company established a world keel-to-launch production speed record of under 70 days, maintaining and improving on the record over the following five months. In early 1918, another U.S. company briefly established a new world keel-to-launch record of 61 days, but Skinner & Eddy recaptured the record in April with the 55-day launch of West Lianga, a ship that was also completed in the record time of 80 days.[5][8]
Thereafter, all the company's ships built during the war were each completed in well under 100 days, with a best performance by war's end of 79 days from keel laying to delivery.[5] Good management alone was probably not entirely responsible for the company's outstanding performance however; Skinner & Eddy also paid its employees highly competitive wages, which enabled the company to attract the best and most skilled workers.
The company's improved performance over time is also reflected in its total production figures. In 1917, the company produced a total tonnage of 72,800 tons; the following year it raised production more than threefold, to 232,400 tons. In all, Skinner & Eddy delivered 32 ships to the EFT, including 29 freighters and three tankers, over the course of the war[5]—more than that of any other shipyard in the country.[3]
Postwar history
Since it was a widely held belief in the United States that a shipbuilding boom would follow the end of hostilities, the USSB declined to cancel many of its wartime shipbuilding contracts at the end of the war. In Skinner & Eddy's case, this meant that the company was to complete a further 43 ships for the USSB in the postwar period.[6] In 1920 however, the USSB cancelled a contract for an additional 25 ships, prompting the company to launch a $17 million claim against the government for lost anticipated profits, later reduced to a $9 million claim.[9]
Skinner & Eddy delivered its last ship in February 1920,[6] but failed to secure any further shipbuilding contracts after this date because of the severe postwar shipbuilding slump. In 1923, the Skinner & Eddy shipyard was permanently closed, and the company's proprietors, D.E. Skinner and John Eddy, dissolved their longstanding business partnership. John Eddy returned to the lumber business, and Skinner became sole proprietor of the Skinner & Eddy Corporation, which retained its original name.[1]
Skinner & Eddy now entered the shipping line business with the purchase of the Pacific Steamship Company, which operated from the company's former Plant No. 2. The company also invested heavily in Alaskansalmon canneries. In 1944, Skinner & Eddy bought the Alaska Steamship Company, and in the postwar period also operated a cruise line. D.E. Skinner's grandson, David E. "Ned" Skinner II, discontinued the business in 1971, moving the family assets into real estate. His Skinner Corporation would eventually become one of America's largest private companies.[10]
The ships
SS West Arrow, one of the first ships built by Skinner & Eddy. This ship was very similar in design to the USSB Design #1013 ships that would later be built by the company
Skinner & Eddy produced a total of 75 ships from 1916 to 1920 (the yard no. sequence ends at 76 as the number 13 was skipped). Most of the ships were freighters, but three 10,000-ton tankers were amongst the seven ships built for private contractors prior to the U.S. entry into World War I.[6]
The company built three different types of standard freighters for the USSB, all of them of Skinner & Eddy's own design. The USSB designated these types as Design 1013, Design 1079 and Design 1105 respectively.[6]
The Design 1013 ships were 8,800 tons deadweight, with a length of 423 feet 9inches (410ft between perpendiculars), beam of 54 feet (16m) and hold depth of 29feet 9inches (9.07m) Some examples of this type of ship were turbine powered and others were fitted with triple expansion engines. Some were also completed as oil fired and others as coal fired vessels. Skinner & Eddy built a total of 24 ships of this type.[11] Most of the ships completed by the company during the war were of this type.
The Design 1079 was of 9,600 tons deadweight, turbine-powered and oil fired, with dimensions of 409.6 x 54.2 x 27.1 feet (8.3m). Skinner & Eddy was the only company which built this type.[12] A total of 23 were completed.[6] The Design 1105 was also 9,600 tons deadweight, oil-fired and with triple expansion engines. Dimensions were 401.5 x 54.8 x 32.1 feet (9.8m). Again, Skinner & Eddy was the only company which produced this type. A total of 14 were built.[13]
Additionally, eleven 8,800 deadweight-ton freighters, similar if not identical to the Design 1013s were built prior to the manufacture of the USSB types listed above.[6] All types had a typical service speed of between 11 and 12 knots (22km/h).[14]
Of the first 39 ships built by Skinner & Eddy during and shortly after World War I, 23 were immediately commissioned on completion into the U.S. Navy, and served briefly as supply ships before decommissioning in 1919. A further three were assigned Navy ID's but never commissioned.
In 1921, three Skinner & Eddy ships (including one of those previously assigned a Navy ID) were converted into destroyer tenders and commissioned into the U.S. Navy as USSAltair(AD-11), USSDenebola(AD-12) and USSRigel(AD-13) respectively. All three of these vessels would remain in Navy service through the end of World War II.[14]
Only one Skinner & Eddy ship was lost (to enemy action) in World War I. In the interwar period, most of the company's vessels were engaged in commercial service. Three, Western Front, Elkton and Nile were lost to maritime accidents in the 1920s, and seven more were scrapped in the 1930s, probably because of the oversupply of shipping.[6]
World War II took a heavy toll of Allied merchant vessels, and of the 64 Skinner & Eddy ships that saw service in the war, 31, or almost 50%, were lost to enemy action, most of them to U-boats. Another two were deliberately sunk as breakwaters during the Normandy Campaign. The 31 that survived the war were mostly scrapped in the late 1940s and 1950s, and only four were still in existence by 1960. The last Skinner & Eddy vessel to see service was probably Edray, transferred to the Soviet Union under lend-lease during World War II and scrapped in 1967.[6]
Fate of the shipyards
Following the closure of the Skinner & Eddy shipyards in 1923, the company's Plant No. 2 was sold in 1924 to the Pacific Steamship Company, which built a new office and terminus on the site. The site also became the terminus of the Admiral Line, which did considerable trade with Siberia and the Orient.[3]
With the onset of the Great Depression in 1929, the site became a Hooverville for Seattle's unemployed. During World War II, the Hooverville was razed to make way for a huge supply depot run by the Army Quartermaster Corps, and after the war it became a base for the U.S. Coast Guard. As of 2003, the site was the location for several large container shipping terminals. Skinner & Eddy's Plant No. 1, meanwhile, has become part of Seattle's SoDo district.[3]
Production history
The following table represents a complete list of all ships built by the Skinner & Eddy Corporation. Ships marked with an asterisk are those assigned ID numbers by the Navy but never commissioned.
Fields marked with a hyphen indicate that the given field is not applicable to this particular ship. Gross tonnage values (GRT) use the nominal GRT for the ship type (identifiable by a "00" in the last two digits) where a more precise GRT is not available for the individual ship. Consult the table legend for additional information about the table.
Ships built by the Skinner & Eddy Corporation, 1916-1920
LEGEND: Yard No. = yard number; USSB No. = USSB number; Name = name of ship. Two digit field (in superscript) following names in this colum indicates last two digits of year in which ship was renamed. Names followed by a "y" (in superscript) indicate a yard name that was not subsequently used during the ship's service history. Type = type of ship, either freighter or tanker. Design No. = USSB Design number. Ships with no listed number were built prior to the introduction of the system. GRT = gross register tons. Ships for which an exact tonnage is not available are listed here with the nominal GRT of the type, usually recognizable by the last two digits being zero. Deliv. = date of ship's delivery to customer. For some ships the exact date is not known. Fate = fate of ship. Sources for this table: Pacific Ports Annual pp.63–64, 402-405; Jordan; shipbuildinghistory.com; and various individual DANFS ship entries.
The Seattle-Tacoma Shipbuilding Corporation was an American corporation which built escort carriers, destroyers, cargo ships and auxiliaries for the United States Navy and merchant marine during World War II in two yards in Puget Sound, Washington. It was the largest producer of destroyers (45) on the West Coast and the largest producer of escort carriers of various classes (56) of any United States yard active during World War II.
USS West Apaum (ID-3221) was a cargo ship in the United States Navy during World War I. She had been built as SS West Apaum for the United States Shipping Board (USSB) as part of the West boats, a series of steel-hulled cargo ships built on the West Coast of the United States.
SS Black Osprey was a cargo ship for the American Diamond Lines and the British Cairn Line. She was formerly known as SS West Arrow when she was launched for the United States Shipping Board (USSB) during World War I. The ship was inspected by the United States Navy for possible use as USS West Arrow (ID-2585) but was neither taken into the Navy nor ever commissioned under that name.
J. F. Duthie & Company was a small shipyard located on the east side of Harbor Island in Seattle, Washington. It was reportedly organized in 1911 and expanded to 4 slipways on 25 acres (10 ha) of property in World War I to build cargo ships for the United Kingdom, France and Norway, but those resources were eventually all diverted at the behest of the United States Shipping Board (USSB). Work on the new plant started on 10 September 1916 and the first keel was laid on 29 November the same year. At that time, the new Skinner & Eddy plant across the water was already launching its first two ships: Niels Nielsen and Hanna Nielsen.
West Compo was a steam cargo ship built in 1918–1919 by Northwest Steel Company of Portland for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The vessel was commissioned into the Naval Overseas Transportation Service (NOTS) of the United States Navy in January 1919 and after only one overseas trip was decommissioned four months later and returned to the USSB. Afterwards the vessel was largely employed on the Atlantic Coast of the United States to France route until mid-1921 when she was laid up and eventually broken up for scrap in 1936.
The Merchant Shipbuilding Corporation was an American corporation established in 1917 by railroad heir W. Averell Harriman to build merchant ships for the Allied war effort in World War I. The MSC operated two shipyards: the former shipyard of John Roach & Sons at Chester, Pennsylvania, and a second, newly established emergency yard at Bristol, Pennsylvania, operated by the MSC on behalf of the U.S. Shipping Board's Emergency Fleet Corporation (EFC).
SS West Elcajon was a steel-hulled cargo ship built in 1918 for the United States Shipping Board's World War I emergency wartime shipbuilding program.
SS West Hosokie was a steel–hulled cargo ship built in 1918 as part of the World War I emergency wartime shipbuilding program organized by the United States Shipping Board.
SS West Gotomska was a steel–hulled cargo ship built in 1918 as part of the World War I emergency wartime shipbuilding program organized by the United States Shipping Board.
SS Edenton was a steel-hulled cargo ship built in 1918 for the United States Shipping Board as part of the Board's World War I emergency shipbuilding program.
SS West Cressey was a steel-hulled cargo ship that saw a brief period of service as an auxiliary with the U.S. Navy in the aftermath of World War I.
SS West Loquassuck was a steel–hulled cargo ship built for the United States Shipping Board's Emergency Fleet Corporation in World War I. After completion on 15 October 1918, the ship was immediately commissioned into the U.S. Navy as USS West Loquassuck (ID-3638), just weeks before the end of the war.
SS West Mahomet was a steel–hulled cargo ship which saw service as an auxiliary with the U.S. Navy in 1918–19.
USS Western Front (ID-1787) was a steel-hulled cargo ship which saw service as an auxiliary with the United States Navy in World War I. Initially named Martha Washington, she was laid down for mercantile service as Nikkosan Maru, but following America's entry into the war, was requisitioned by the United States Shipping Board and commissioned into the U.S. Navy as the supply ship USS Indiana. This name was also quickly dropped however, in favour of USS Western Front.
SS West Eldara was a steel-hulled cargo ship built in 1918 as part of the United States Shipping Board's emergency World War I shipbuilding program.
USS West Hobomac was a steel–hulled cargo ship which saw service with the U.S. Navy as an auxiliary during World War I, and which later operated under the British flag during World War II before being lost to enemy action.
SS West Humhaw was a steel–hulled cargo ship built in 1918 as part of the United States Shipping Board's emergency World War I shipbuilding program.
The Seattle Construction and Drydock Company was a shipbuilding company based in Seattle, Washington. Between 1911 and 1918, it produced a substantial number of ships for both commercial and military uses. In the beginning of the 20th century, until its significance was diluted by the emergence of a number of shipyards during the World War I shipbuilding boom, it was the largest of its kind in Seattle and one of the few significant ship yards along the West Coast of the United States, second only to the Union Iron Works in San Francisco.
Wheatland Montana was a steam cargo ship built in 1919 by Skinner & Eddy of Seattle for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The freighter spent the majority of her career in the Pacific connecting the West Coast of the United States with the Chinese and Japanese ports in the Far East. Early in 1928 the ship, together with six other vessels, was sold by the Shipping Board to the Tacoma Oriental Steamship Co. and subsequently renamed Seattle. After her owner declared bankruptcy early in 1937, the ship was sold to Matson Navigation Company and renamed Lihue. She was then mainly employed to transport sugar and canned fruit from the Hawaiian Islands to the ports on the East Coast of the United States. In February 1942, she was chartered to transport general cargo and war supplies to the Middle East but was torpedoed by U-161 in the Caribbean Sea on February 23, and eventually sank three days later while under tow without loss of life.
Cansumset was a steam cargo ship built in 1918-1919 by Pacific Coast Shipbuilding Company of Bay Point for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The vessel was largely employed on the Pacific Coast of the United States to Europe route until 1921 when it was laid up and eventually broken up for scrap in 1930. Due to frequent breakdowns during her short career the freighter was known as the "Hoodoo" ship of the USSB.
References
1 2 "History". Port Blakely. Port Blakely. Archived from the original on 2016-03-03. Retrieved 2024-10-03.
↑ City of Seatlle Harbor Dept. "Map of Central Waterfront District". Washington State University Libraries Digital Collections. Washington State University. Retrieved 2024-10-02.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
