Spring Hill Manufacturing | |
---|---|
Built | 1986 - 1990 |
Operated | 1990 - present |
Location | 100 Saturn Parkway Spring Hill, Tennessee, United States |
Coordinates | 35°44′24″N86°57′54″W / 35.7400°N 86.9650°W |
Products | |
Employees | 3,200 |
Area | 2,000 acres (8.1 km2) |
Volume | 7,900,000 sq ft (730,000 m2) |
Owner(s) | General Motors |
Spring Hill Manufacturing is a General Motors factory in Spring Hill, Tennessee. It was developed from 1985 and launched in 1990 as the sole manufacturing facility for Saturn Corporation. The plant currently includes vehicle assembly (Cadillac Lyriq, Cadillac XT5, and Cadillac XT6) plus powertrain, stamping and molding operations. [1]
On January 7, 1985, Saturn Corporation was formed as a subsidiary of General Motors to compete with Japanese imports, and soon searched for a site for a manufacturing facility. Governor Lamar Alexander began encouraging GM to locate the plant in Tennessee. [2] The site in Spring Hill was officially announced on July 26, 1985. [3] At the time, Spring Hill was a predominantly agricultural community with a population of about 1,000. [4] A payment in lieu of taxes agreement was negotiated with the state in September 1985, and that same month the Tennessee Department of Transportation announced plans to construct State Route 396 (Saturn Parkway), a 5 mi (8.0 km) long controlled access highway that connects the plant to Interstate 65, at a cost of $29.3 million. [5] This was completed in 1989. [6] Preliminary site work for the plant began in May 1986, and construction activities began two months later. The plant began operation on July 31, 1990, when the first vehicle was produced. [7]
The decision to locate one factory as the source of Saturn vehicles was based on a tradition GM was founded on in 1909 with the core brands that came together to form GM. Chevrolet, Pontiac, Oldsmobile, Buick and Cadillac each had main factories where the cars originated from, then in 1933 branch assembly plants were established in major American cities and the branch assembly locations would receive knock-down kits from the main plants and locally assemble GM products to meet demand. The main facilities were Flint, Michigan for both Buick and Chevrolet; Oldsmobile at Lansing, Michigan; Pontiac at Pontiac, Michigan; and Cadillac at Detroit, Michigan. The approach for Saturn was to have one dedicated location where vehicles originated from one location as in the past with the legacy brands.
Manufacturing continued through March 2004 as the sole assembly plant overseen by the Saturn subsidiary. [8] After the United Auto Workers ratified a new contract in March 2004, the plant became part of General Motors, but Saturn-only manufacturing lines continued until March 2007. The facility includes a four-cylinder engine assembly plant, auto assembly plant, paint and plastics plant, a Saturn parts warehouse, and a visitors center. In 2005, the plant had a yearly production of 198,142 vehicles. [9] Harbour Consulting rated the Ion line as the tenth most efficient auto plant in North America in 2006. [10]
After GM considered idling or shutting down the plant as part of its restructuring effort, it idled in March 2007 for a 1-year retooling project to produce the 2009 Chevrolet Traverse after receiving incentives from the State of Tennessee. Changes include adding metal stamping and removing the plastics plant (the Saturn production lines used plastic-based panels). [11] General Motors has stated the plant will manufacture various GM vehicles and no longer be dedicated to Saturns.
The vehicle assembly part of the Spring Hill plant was idled in late 2009 when production of the Traverse was moved to Lansing Delta Township Assembly near Lansing, MI, while production of power trains and metal stamping continued. [12] [13] [14] Nearly 2,500 Spring Hill auto workers were faced with lay-offs, buy-outs and early retirement. [15] In September 2011, it was announced that the plant would end its period of idling. [16] In November 2011, GM announced plans for retooling of the vehicle assembly portion of the plant for use as an "ultra-flexible" plant which will initially be used to build the Chevrolet Equinox but will be designed for rapid retooling to other vehicles of similar size. [17] [18] [19]
In 2015, the plant announced that it would be reopening the entire plant's facilities, and would hire locally creating thousands of jobs for the surrounding area. General Motors looks to expand the plant's facilities and influence in the North American and Global Auto industries, [20] and as of 2021, was the company's largest plant in North America. [1]
In January 2019, General Motors said it has invested $2 billion into the complex since 2010. [21] In October 2020, GM announced that it was investing another $2 billion in the plant to build electric vehicles including the Cadillac Lyriq. [22]
Cadillac Motor Car Division, or simply Cadillac, is a division of the American automobile manufacturer General Motors (GM) that designs and builds luxury vehicles. Its major markets are the United States, Canada and China. Cadillac models are distributed in 34 additional markets worldwide. Historically, Cadillac automobiles were at the top of the luxury field within the United States, but have been outsold by European luxury brands including BMW and Mercedes since the 2000s. In 2019, Cadillac sold 390,458 vehicles worldwide, a record for the brand.
Spring Hill is a city in Maury and Williamson counties in the U.S. state of Tennessee, located approximately 30 miles (48 km) south of Nashville. Its population as of 2022 is 55,800. Spring Hill is recognized as the 4th fastest growing city in Tennessee by the U.S. Census Bureau and is included in the Nashville metropolitan area.
The Saturn Corporation, also known as Saturn LLC, was an American automobile manufacturer, a registered trademark established on January 7, 1985, as a subsidiary of General Motors. The company was an attempt by GM to compete directly with Japanese imports and transplants, initially in the US compact car market. The company was known for its 'no-haggle' sales technique.
GM Korea Company is the South Korean subsidiary of multinational corporation General Motors and the third largest automobile manufacturer in South Korea. GM Korea's roots go back to the former Daewoo Motors vehicle brand, which was split from its parent company, Daewoo Group, in 2002. In addition to importing vehicles for sale into South Korea, the company also operates three manufacturing facilities producing vehicles for the domestic market and for export. The company also operates GM Technical Center Korea, a design, engineering, research & development facility for various GM products, primarily small-size cars.
Epsilon is General Motors' mid-size front-wheel drive automobile platform. The architecture was a multi-division project of GM North America, Opel and Saab, and debuted in the 2002 Opel Vectra and 2003 Saab 9-3. Since this platform falls squarely in the center of the worldwide automobile market, GM plans to produce a great many Epsilon vehicles with over a dozen variations. As of 2005, it was GM's highest volume worldwide platform. Even after the dissolution of the GM/Fiat partnership, both companies retain the rights to continue developing Epsilon-derived models.
SAIC General Motors Corporation Limited is a joint venture between General Motors Company and SAIC Motor that manufactures and sells Chevrolet, Buick, and Cadillac brand automobiles in Mainland China.
Lambda is General Motors full-size or mid-size 3-row crossover SUV automobile platform. It is largely derived from the GM Epsilon platform, which underlies the Chevrolet Malibu sedan and similar models.
The Lansing Craft Center (LCC) was a specialized General Motors automobile assembly factory in Lansing Township, Michigan located at 2801 West Saginaw Street across from GM's Lansing Metal Center.
Arlington Assembly is a General Motors automobile factory located in Arlington, Texas. The plant has operated for more than 60 years and today manufactures large SUVs from GM's divisions Chevrolet, GMC and Cadillac.
Wilmington Assembly was a General Motors automobile factory in Wilmington, Delaware. The 3,200,000-square-foot (300,000 m2) factory opened in 1947, and produced cars for GM's Chevrolet, Pontiac, Saturn, Opel, Buick and Daewoo brands during its operation. GM closed the plant on July 28, 2009.
Linden Assembly was a General Motors automobile factory in Linden, New Jersey, United States. The plant operated from 1937 to 2005 and made cars, trucks and SUVs for various GM automotive divisions.
Detroit/Hamtramck Assembly, also referred to as Factory Zero and GM Poletown, is a General Motors (GM) automobile assembly plant straddling the border between Detroit and Hamtramck, Michigan. It is located about three miles (five km) from GM's corporate headquarters.
Oshawa Assembly is a manufacturing facility in the city of Oshawa, Ontario, Canada, that built various automobiles for General Motors Canada.
Flint, Michigan is a city which previously relied on its automotive industry, and still does to an extent. Over the past several decades, General Motors plants in Genesee County have experienced re-namings, management shifts, openings, closures, reopenings, and spinoffs.
Orion Assembly is a 4,300,000 sq ft (400,000 m2) General Motors vehicle assembly plant located in Orion Township, Michigan. From late 2025, the plant is slated to assemble battery electric pickup trucks such as the Chevrolet Silverado EV and the GMC Sierra EV. As of September 2019, the plant has approximately 1,032 salaried and hourly employees. It assumed operations of Buick City, and Pontiac Assembly.
Pontiac Assembly was one of four General Motors assembly plants in Pontiac, Michigan located along Baldwin Avenue. It served as the home factory for GM's Pontiac Motor Division since it was built in 1927. It was across the street from the currently operational Pontiac Metal Center, which was the original location for the Oakland Motor Car Company, which Pontiac evolved out of.
South Gate Assembly was a General Motors automobile plant located at 2720 Tweedy Boulevard in the Los Angeles suburb of South Gate, California. It opened in 1936 to build B-O-P (Buick-Oldsmobile-Pontiac) cars for sale on the West Coast. It was the first GM plant to build multiple car lines, resulting from a Depression-spawned move to cut production costs by sharing components and manufacturing. South Gate was the first of several B-O-P "branch" assembly plants, part of GM's strategy to have production facilities in major metropolitan cities. The originally Pontiac operated South Gate plant was part of GM's Southern California Division through 1942.
The Ramos Arizpe Assembly is a General Motors automobile factory in Ramos Arizpe, Coahuila, Mexico. It opened in 1981 and has manufactured Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac, Saturn, and Saab vehicles. It currently produces the Chevrolet Blazer and, along with San Luis Potosi Assembly, the Chevrolet Equinox.
The Cadillac XT6 is a mid-size luxury crossover SUV with three-row seating manufactured by General Motors. The vehicle was introduced on January 12, 2019, at the North American International Auto Show. It went on sale in June 2019 as a 2020 model.
The Cadillac Lyriq is an electric mid-size luxury crossover SUV manufactured and marketed by the Cadillac subdivision of General Motors. As Cadillac's first fully electric vehicle, and the first GM production vehicle using the BEV3 platform, the Lyriq introduces a new version of GM's Super Cruise semi-autonomous driving system.