Rochester Products Division

Last updated
Rochester Products Division
Industry Automotive
GenreAutomobile parts production
Founded1939
Defunct1995
Headquarters1000 Lexington Avenue,
Rochester, New York
,
United States
Area served
Worldwide
ProductsAutomotive parts
OwnerGeneral Motors
Parent Delphi Corporation
Formerly General Motors
Divisions AC Rochester
Website https://www.gm.com/company/facilities/rochester-operations

Rochester Products Division (RPD) was a division of General Motors that manufactured carburetors, and related components including emissions control devices and cruise control systems in Rochester, New York. In 1995 Rochester became part of Delphi, which in turn became a separate company four years later, [1] and continues to manufacture fuel injection systems in Rochester, now part of General Motors Automotive Components Holdings- Rochester Operations.

Contents

History

The company began as the Rochester Coil Company founded by Edward A. Halbleib in 1908, [2] becoming the North East Electric Company the following year. In 1916 the company was located at 348 Whitney Street, Rochester. [3]

In 1929 Alfred P. Sloan announced the acquisition of the company on behalf of General Motors. [4] "For some years this Company has been an outstanding manufacturer of starters, ignition systems and other electrical equipment." [5] "It was consolidated with GM's former Delco-Light Company in 1930 and later renamed Delco Appliance Division." In 1937 Rochester Products was founded, planned as a second plant for Delco Appliance, but achieving Division status by 1939. [6] In 1953 an advertisement in Life stated: "Rochester builds original equipment carburetors for Chevrolet starting with 1950, Oldsmobile from 1949 and Cadillac from 1951. Also, Rochester supplies replacement carburetors for Chevrolets from 1932." [7] Rochester also supplied Pontiac, while using the Power Jet name in the replacement market. [8]

In 1952 the Oregonian reported: "Automobile cigarette lighters produced by the Rochester Automotive products division of General Motors are tested to reach a temperature of 1400 degrees in no less than 10 and no more than 12 seconds." [9]

The 2G (later 2GC and 2GV) carburetor, commonly called the 2 Jet, was introduced in 1955, and continued to be used on GM V8s until at least 1969. [10] In all, it was used in at least 125 applications, including the Brockway's inline six. [11] In 1957 Chevrolet introduced their first fuel-injected engine, [12] the Rochester Ramjet high-performance option on Corvette and passenger cars at $484. [13] In 1956 Oldsmobile were also experimenting with Rochester fuel injection, at the GM desert proving grounds near Phoenix, but offered the Rochester triple-carburetor J2 option for 1957. [14]

The company is best known[ according to whom? ] for the Quadrajet carburetor, which was originally designed in the 1960s and remained in production, with modifications to meet progressively tightening exhaust emission limits, into the 1980s. The Quadrajet became computer controlled in 1980 in California and in 1981 in the rest of the states; its last application was on the 1990 Cadillac Brougham and 1990 full size GM station wagons with the Olds 307 engine.[ citation needed ] RPD was a pioneer in fuel injection systems in road cars in the 1980s.[ citation needed ] In addition to carburetors, Rochester also made various emissions control equipment such as charcoal canisters and EGR valves, [15] which found use in GM vehicles as well as those from other makes.[ citation needed ] Other products made at this plant were locks and keys[ citation needed ] as well as steel tubing for both vehicular and non-vehicular applications.[ citation needed ] The last major carburetor design by Rochester was the Varajet II,[ citation needed ] essentially a Quadrajet halved lengthwise,[ citation needed ] and was one of the few successful progressive 2-barrel carburetors.[ according to whom? ] It was installed on 4- and 6-cylinder engines from 1979 to 1986.[ citation needed ]

In 1981, Rochester Products and Diesel Equipment Division merged in what was publicly described as a cost-cutting move. At this time RPD had about 7,000 employees, and DED had about 3,300 employees. [16] DED had plants in Grand Rapids, Michigan. [17] The headquarters remained in Rochester.

In 1988, the diesel fuel injection business was sold to Penske Transportation, [18] and Rochester Products and AC Spark Plug merged. [19]

Between the end of 1991 and the beginning of 1992, Rochester Products, at the request of General Motors do Brasil, launched on the Brazilian market the first electronic fuel injection in the world programmed and developed for ethanol in the Chevrolet Monza, Chevrolet Kadett and Chevrolet Ipanema, known in Europe such as Opel Ascona, Opel Kadett and Opel Kadett Caravan respectively. The system model was the Rochester Multec-700 with a single fuel injector (singlepoint).[ citation needed ]

In 1994, the Grand Rapids operations of AC Rochester were spun off. [20]

See also

Related Research Articles

<span class="mw-page-title-main">Oldsmobile</span> Former entry-level luxury division of General Motors

Oldsmobile was a brand of American automobiles, produced for most of its existence by General Motors. Originally established as "Olds Motor Vehicle Company" by Ransom E. Olds in 1897, it produced over 35 million vehicles, including at least 14 million built at its Lansing, Michigan factory alone.

<span class="mw-page-title-main">Opel Astra</span> Compact car

The Opel Astra is a compact car/small family car (C-segment) developed and produced by the German automaker Opel since 1991, currently at its sixth generation. It was first launched in September 1991 as a direct replacement to the Opel Kadett. As of 2022, the car slots between the smaller Corsa supermini and the larger Insignia large family car.

<span class="mw-page-title-main">Opel Ascona</span> Motor vehicle

The Opel Ascona is a large family car that was produced by the German automaker Opel from 1970 to 1988. It was produced in three separate generations, beginning with rear-wheel-drive and ending up as a front-wheel drive J-car derivative.

<span class="mw-page-title-main">Chevrolet small-block engine (first- and second-generation)</span> Car engine

The Chevrolet small-block engine is a series of gasoline-powered V8 automobile engines, produced by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block. Referred to as a "small-block" for its size relative to the physically much larger Chevrolet big-block engines, the small block family spanned from 262 cu in (4.3 L) to 400 cu in (6.6 L) in displacement. Engineer Ed Cole is credited with leading the design for this engine. The engine block and cylinder heads were cast at Saginaw Metal Casting Operations in Saginaw, Michigan.

<span class="mw-page-title-main">General Motors 60° V6 engine</span> Reciprocating internal combustion engine

The General Motors 60° V6 engine family is a series of 60° V6 engines produced for both longitudinal and transverse applications. All of these engines are 12-valve cam-in-block or overhead valve engines, except for the LQ1 which uses 24 valves driven by dual overhead cams. These engines vary in displacement between 2.5 and 3.4 litres and have a cast-iron block and either cast-iron or aluminum heads. Production of these engines began in 1980 and ended in 2005 in the U.S., with production continued in China until 2010. This engine family was the basis for the GM High Value engine family. These engines have also been referred to as the X engines as they were first used in the X-body cars.

<span class="mw-page-title-main">Buick V6 engine</span> Reciprocating internal combustion engine

The Buick V6 was an OHV V6 engine developed by the Buick division of General Motors and introduced in 1962. Originally 198 cu in (3.2 L) and initially marketed as Fireball, it later became popularly referred to as the 3800 for its various 3.8 L (230 cu in) incarnations.

<span class="mw-page-title-main">Oldsmobile V8 engine</span> Reciprocating internal combustion engine

The Oldsmobile V8, also referred to as the Rocket, is series of engines that was produced by Oldsmobile from 1949 until 1990. The Rocket, along with the 1949 Cadillac V8, were the first post-war OHV crossflow cylinder head V8 engines produced by General Motors. Like all other GM divisions, Olds continued building its own V8 engine family for decades, adopting the corporate Chevrolet 350 small-block and Cadillac Northstar engine only in the 1990s. All Oldsmobile V8s were manufactured at plants in Lansing, Michigan while the engine block and cylinder heads were cast at Saginaw Metal Casting Operations.

<span class="mw-page-title-main">Cadillac V8 engine</span> Reciprocating internal combustion engine

The term Cadillac V8 may refer to any of a number of V8 engines produced by the Cadillac Division of General Motors since it pioneered the first such mass-produced engine in 1914.

<span class="mw-page-title-main">General Motors 122 engine</span> Reciprocating internal combustion engine

The 122 engine was designed by Chevrolet and was used in a wide array of General Motors vehicles. The 122 was similar to the first two generations of the General Motors 60° V6 engine; sharing cylinder bore diameters and some parts. The 122 was available in the US beginning in 1982 for the GM J platform compact cars and S-series trucks.

<span class="mw-page-title-main">GM Family 1 engine</span> Reciprocating internal combustion engine

The GM Family I is a straight-four piston engine that was developed by Opel, a former subsidiary of General Motors and now a subsidiary of PSA Group, to replace the Vauxhall OHV, Opel OHV and the smaller capacity Opel CIH engines for use on small to mid-range cars from Opel/Vauxhall. The engine first appeared in the Opel Kadett D in 1979, and shortly afterwards in its Vauxhall badged sister - the Vauxhall Astra Mk.1 in 1980. Despite this, the previous Opel OHV engine continued to be sold in entry level versions of the Opel Kadett/Astra and Corsa throughout the 1980s.

Multijet is Stellantis's term for its current common rail direct injection turbodiesel engine range. Most of the Fiat, Alfa Romeo, and Lancia range, as well as certain Chrysler, RAM Trucks, Jeep, and Maserati vehicles, are equipped with Multijet engines. Ownership of some Fiat Multijet designs is shared with General Motors as part of a settlement of the failed merger between the two auto conglomerates. The GM Powertrain Torino group in Turin, Italy, manages its interest in these engines. Some PSA Peugeot Citroën diesel engines are also rebadged JTD units, and vice versa. Fiat's common-rail diesel engine is also known as JTD, an initialism of Jet Turbo Diesel.

<span class="mw-page-title-main">Chevrolet Opala</span> Motor vehicle

The Chevrolet Opala is a Brazilian mid-size car sold under the Chevrolet brand in South America from 1969 to 1992, by General Motors do Brasil. It was derived from the German Opel Rekord Series C, Opel Commodore Series A, but used local design styling and engines derived from North American designs. GM manufactured about one million units including the Opala sedan, Opala Coupé, and the station wagon variant, the Opala Caravan. It was replaced by the Chevrolet Omega in 1992, also an Opel spinoff. It was the first passenger car built by GM in Brazil by the General Motors do Brasil division. A luxury version of the Opala was marketed as the Chevrolet Diplomata.

Delco Electronics Corporation was the automotive electronics design and manufacturing subsidiary of General Motors based in Kokomo, Indiana, that manufactured Delco Automobile radios and other electric products found in GM cars. In 1972, General Motors merged it with the AC Electronics division and it continued to operate as part of the Delco Electronics division of General Motors. When the corporation acquired the Hughes Aircraft Company, Delco was merged with it to form Hughes Electronics as an independent subsidiary.

The Quadrajet is a four barrel carburetor, made by the Rochester Products Division of General Motors. Its first application was the new-for-1965 Chevy 396ci engine. Its last application was on the 1990 Oldsmobile 307 V8 engine, which was last used in the Cadillac Brougham and full size station wagons made by Chevrolet, Pontiac, Oldsmobile, and Buick.

<span class="mw-page-title-main">History of General Motors</span> Aspect of history

The history of General Motors (GM), one of the world's largest car and truck manufacturers, dates back more than a century and involves a vast scope of industrial activity around the world, mostly focused on motorized transportation and the engineering and manufacturing that make it possible. Founded in 1908 as a holding company in Flint, Michigan, as of 2012 it employed approximately 209,000 people around the world. With global headquarters at the Renaissance Center in Detroit, Michigan, United States, General Motors manufactures cars and trucks in 35 countries. In 2008, 8.35 million GM cars and trucks were sold globally under various brands. Current auto brands are Buick, Cadillac, Chevrolet, GMC, Baojun, and Wuling. Former GM automotive brands include LaSalle, McLaughlin, Oakland, Oldsmobile, Opel, Pontiac, Hummer, Saab, Saturn, Vauxhall, Daewoo, and Holden.

<span class="mw-page-title-main">Holley Performance Products</span>

Holley Performance Products is an automotive performance company based in Bowling Green, Kentucky. It was founded in 1896 in Bradford, Pennsylvania, by George Holley and Earl Holley. When the company was based in Michigan it was a major producer of carburetors for many Detroit-built automobiles.

ACDelco is an American automotive parts brand owned by General Motors (GM). Factory parts for vehicles manufactured by GM are consolidated under the ACDelco brand, which also offers aftermarket parts for non-GM vehicles. Over its long history it has been known by various names such as United Motors Corporation, United Motors Service, and United Delco. The brand "ACDelco" should not be confused with GM's former AC Delco Systems, formed in 1994 from the merger of AC Rochester Division and Delco Remy Division. In 1995 Delphi Automotive Systems absorbed AC Delco Systems.

<span class="mw-page-title-main">Opel Kadett C</span> Motor vehicle

The Opel Kadett C is a small family car which was produced by the German automobile manufacturer Opel from 1973 to 1979. The Kadett C, which was the fourth generation of the Opel Kadett, was released in August 1973, and was Opel's version of the General Motors "T-Car". It was the last small Opel to feature rear-wheel drive, and remained in production at Opel's Bochum plant until July 1979, by which time Opel had produced 1,701,076. Of these, 52% had been exported outside West Germany, most of them to markets in other parts of western Europe. In other world markets, however, various badge engineered versions of the Kadett C remained in production as late as the mid-1990s under other GM brand names.

<span class="mw-page-title-main">Chevrolet Turbo-Thrift engine</span> Reciprocating internal combustion engine

The Chevrolet Turbo-Thrift engine is a straight-six produced from 1962 to 2001 by the Chevrolet division of General Motors. The entire series of engines was commonly called Turbo-Thrift, although the name was first used on the 230 cubic inch version that debuted in 1963. The new engine featured seven main bearings in lieu of the four bearing design of its predecessor, the "Stovebolt" engine, and was considerably smaller and approximately 100 lbs lighter.

References

  1. Thomas H. Klier, James M. Rubenstein, Who really made your car?: restructuring and geographic change in the auto industry , Page 48, W.E. Upjohn Institute for Employment Research, 2008.
  2. James M. Rubenstein, The Changing U.S. Auto Industry: A Geographical Analysis, Page 114, Routledge, London, 1992.
  3. Rochester, City of Varied Industries-1916, The Rochester Chamber of Commerce, Page 25.
  4. Springfield Republican, September 22, 1929, Page 61.
  5. General Motors Corporation Annual Report, 1929, Page 16.
  6. Dallas Morning News, March 5, 1958, Part 1-A, Page 5.
  7. Life, March 30, 1953, Page 37.
  8. Oregonian, July 25, 1951, Page 27.
  9. Oregonian, March 16, 1952, Page 74.
  10. Street Rodder, 1/85, p.14.
  11. Street Rodder, 1/85, p.14.
  12. Springfield Union, February 17, 1957, Page 75.
  13. Dallas Morning News, November 22, 1956, Part 1, Page 12.
  14. Oregonian, November 4, 1956, Page 76.
  15. Rochester Operations
  16. Wall Street Journal, April 27, 1981, Page 24.
  17. Company News; G.M. Announces Merger of 2 Units - New York Times
  18. New York Times, August 27, 1988, Page 33.
  19. COMPANY NEWS; G.M. Merges Units - New York Times
  20. SEC Info - General Motors Corp - 10-K405 - For 12/31/94 - EX-10.(B) (132nd Page of 162).