Buffalo Assembly

Last updated
Buffalo Assembly
Buffalo Assembly
Operated1923–2007
Coordinates 42°55′12″N78°49′18″W / 42.9201232°N 78.8216016°W / 42.9201232; -78.8216016
Industry Automotive
Products Chevrolet Automobiles
Address1001 East Delevan Avenue
Owner(s) General Motors
Defunct2007;17 years ago (2007)

Buffalo Assembly was a General Motors (GM) manufacturing facility in Buffalo, New York that produced Chevrolet vehicles. Located at 1001 East Delevan Avenue, it operated from 1923 until 2007.

Contents

GM opened the factory to build the Chevrolet Superior; this model was also built in GM's North Tarrytown Assembly facility in New York state. The plant continued car manufacture until World War II, when it was refitted to build rear axles for passenger cars and trucks. [1] In 1984, Chevrolet-Buffalo became part of GM-Saginaw where it was renamed Saginaw Gear and Axle. Production and operations ended in 2007.

The Chevrolet Buffalo factory is part of a long history of automotive manufacturing in the area, along with Pierce-Arrow and the earlier Thomas Motor Company, while Ford still maintains the Buffalo Stamping Plant and GM makes engines at the Tonawanda Engine plant.

It is currently identified as the Historic American Axle Building.[ citation needed ]

Models

Some of the models produced at the plant included:

See also

Related Research Articles

<span class="mw-page-title-main">Chevrolet</span> American automobile division of General Motors

Chevrolet, colloquially referred to as Chevy, is an American automobile division of the manufacturer General Motors (GM).

<span class="mw-page-title-main">Chevrolet Corvair</span> Compact automobile

The Chevrolet Corvair is a rear-engined, air-cooled compact car manufactured by Chevrolet in two generations between 1960–1969. A response to the Volkswagen Beetle, it was produced in 4-door sedan, 2-door coupe, convertible, 4-door station wagon, passenger van, commercial van, and pickup truck body styles in its first generation (1960–1964), and as a 2-door coupe, convertible or 4-door hardtop in its second (1965–1969). Total production was approximately 1.8 million vehicles from 1960 until 1969.

<span class="mw-page-title-main">Buick City</span> Car factory in Flint, Michigan (1904–1999)

Buick City was a massive, vertically-integrated automobile manufacturing complex in northeast Flint, Michigan, which served the Buick home plant between 1904 and 1999. In the early 1980s, after major renovations were completed to better compete with Japanese producers, the plant was renamed to "Buick City".

Arlington Assembly is a General Motors automobile factory located in Arlington, Texas. The plant has operated for more than 60 years and today manufactures large SUVs from GM's divisions Chevrolet, GMC and Cadillac.

Flint Assembly is an automobile factory operated by General Motors in Flint, Michigan. It is the city's only vehicle assembly plant after the closure of Buick City. Flint Truck Assembly is also GM's oldest, still operating assembly plant in North America. As of 2022, the Flint factory currently produces full-size pickup trucks. Engine block and cylinder heads were cast at Saginaw Metal Casting Operations, internal engine components were created at Bay City Powertrain and Grand Rapids Operations, and the engines were then assembled at Tonawanda Engine and Romulus Engine. For most of the 20th century Flint Assembly was the home factory for all Chevrolet vehicles.

<span class="mw-page-title-main">Janesville Assembly Plant</span> Former automobile factory owned by General Motors.

Janesville Assembly Plant was a former automobile factory owned by General Motors located in Janesville, Wisconsin. Opened in 1919, it was the oldest operating GM plant when it was largely idled in December 2008, and ceased all remaining production on April 23, 2009. The demolition of the plant was completed in 2019.

<span class="mw-page-title-main">General Motors Canada</span> Canadas division of General Motors

General Motors of Canada Company, commonly known as GM Canada, is the Canadian subsidiary of US-based company General Motors. It is headquartered in Oshawa, Ontario, Canada.

Flint Engine Operations is a General Motors automobile engine factory in Flint, Michigan. The plant opened in 2002 and is named to replace the Flint North engine plant. The plant currently produces the small four-cylinder SGE and Duramax I6 engines. The factory receives cast engine blocks from Defiance Foundry in Defiance, Ohio and Saginaw Metal Casting Operations in Saginaw, Michigan. It replaced Flint North.

<span class="mw-page-title-main">Wilmington Assembly</span>

Wilmington Assembly was a General Motors automobile factory in Wilmington, Delaware. The 3,200,000-square-foot (300,000 m2) factory opened in 1947, and produced cars for GM's Chevrolet, Pontiac, Saturn, Opel, Buick and Daewoo brands during its operation. GM closed the plant on July 28, 2009.

<span class="mw-page-title-main">Fremont Assembly</span> Former GM automobile assembly plant in Fremont, California

Fremont Assembly was a General Motors automobile factory in Fremont, California, in the San Francisco area, replacing the older Oakland Assembly. Groundbreaking for the plant occurred in September 1961, and the plant produced its first vehicle on May 1, 1963. Production continued through March 1, 1982, when the plant was closed after production problems. After closure, the plant was refurbished and reopened as the more successful NUMMI joint-venture between GM and Toyota between 1984 and 2010, and later became the Tesla Factory in 2010.

Detroit/Hamtramck Assembly, also referred to as Factory Zero and GM Poletown, is a General Motors (GM) automobile assembly plant straddling the border between Detroit and Hamtramck, Michigan. It is located about three miles (five km) from GM's corporate headquarters.

<span class="mw-page-title-main">Oshawa Car Assembly</span> Vehicle manufacturing facility in Oshawa, Ontario

Oshawa Assembly is a manufacturing facility in the city of Oshawa, Ontario, Canada, that built various automobiles for General Motors Canada.

Spring Hill Manufacturing is a General Motors factory in Spring Hill, Tennessee. It was developed from 1985 and launched in 1990 as the sole manufacturing facility for Saturn Corporation. The plant currently includes vehicle assembly plus powertrain, stamping and molding operations.

<span class="mw-page-title-main">Automotive industry in Flint, Michigan</span>

Flint, Michigan is a city which previously relied on its automotive industry, and still does to an extent. Over the past several decades, General Motors plants in Genesee County have experienced re-namings, management shifts, openings, closures, reopenings, and spinoffs.

Located in Norwood, Ohio, the Norwood Assembly Plant built General Motors cars between the years of 1923 and 1987. When it first opened, the plant employed 600 workers and was capable of producing 200 cars per day. At its peak in the early 1970s it employed nearly 9,000. Norwood is a suburb of Cincinnati.

Pontiac Assembly was one of four General Motors assembly plants in Pontiac, Michigan located along Baldwin Avenue. It served as the home factory for GM's Pontiac Motor Division since it was built in 1927. It was across the street from the currently operational Pontiac Metal Center, which was the original location for the Oakland Motor Car Company, which Pontiac evolved out of.

<span class="mw-page-title-main">UzAuto Motors</span> Uzbekistan state automotive manufacturer

UzAuto Motors is an automotive manufacturer owned by the Government of Uzbekistan. It is based in Asaka, Uzbekistan. It manufactures vehicles under the marques Chevrolet and Ravon, which is Uzbek for calm and straight road or easy journey.

<span class="mw-page-title-main">Chevrolet Series CA Eagle / Master</span> Car model

The Chevrolet Series CA Eagle and Master is an American vehicle manufactured by Chevrolet in 1933 to replace the 1932 Series BA Confederate. The car was called "Eagle" early in the 1933 production year. When it was joined by the cheaper Chevrolet Standard Six later in February, 1933 the Eagle name was changed to "Master" to provide Chevrolet with a two-car range, and for the first time in ten years they manufactured two models on different wheelbases. Starting in 1926, GM introduced the short lived General Motors companion make program where Oakland, Oldsmobile, Buick and Cadillac had "companion" models added to each division. The only division that didn't get a "junior" brand was Chevrolet; instead, the lower-priced Standard series was introduced.

<span class="mw-page-title-main">Oakland Assembly</span> Chevrolet factory active 1916–1963

Oakland Assembly was a former Chevrolet manufacturing facility located in Elmhurst, Oakland, California. It was the first automobile plant established in Northern California to build Chevrolet vehicles. In 1916, Chevrolet opened the auto industry's first West Coast assembly plant in Oakland. Production of the Chevrolet Series 490 began on Sept. 23, 1916, while World War I was taking place.

Saginaw Metal Casting Operations is an automobile engine foundry plant in Saginaw, Michigan. Opened under GM management in 1919, the factory produces engine blocks and cylinder heads for General Motors vehicles. The factory currently occupies 1.9 million square feet on 490 acres. Historically in September 1927 it was known as the Chevrolet Grey Iron Foundry. In the past when it was called GM-Saginaw Product Company (SPC) a cloverleaf casting symbol mark was cast onto the iron component.

References

  1. Kimes, Beverly R. (1996). Clark, Henry A. (ed.). The Standard Catalog of American Cars 1805-1945. Kraus Publications. pp. 283–302. ISBN   0873414780.