This was the first major class of warship designed and built in Canada. They were analogous to the British Type 12 Whitby-class frigate, intended for the same ASW mission and using the same machinery but used a dramatically different hull form and predominantly American equipment rather than British. There were seven ships of the class commissioned between 1955 and 1957.
They were originally intended as destroyer escorts (DDE) but were later refitted and reclassed as destroyer helicopter escorts (DDH).
Design and description
The need for the St. Laurent class came about in 1949 when Canada joined NATO and the Cold War was in its infancy. The Royal Canadian Navy (RCN) was assigned responsibility for anti-submarine warfare (ASW) and controlling sea space in the western North Atlantic.
Design work for a new class of destroyer escorts began in June 1949[3] with the original completion date slated for 1955. They were designed by Montreal naval architects German and Milne, under the direction of a senior constructor, Sir Rowland Baker, seconded from the British Director of Naval Construction. Baker produced a design basically similar to the Whitby-class (Type 12) frigate, while incorporating several ideas of his own. Different in appearance to the Type 12 design, the ship that resulted was similar in many respects.[4]
The St Laurent class were built to an operational requirement much like that which produced the British Type 12, and were powered by the same machinery plant. The rounded deck-edge forward was adopted to prevent ice forming.[5] The vessels were designed to operate in harsh Canadian conditions. They were built to counter nuclear, biological and chemical attack conditions, which led to a design with a rounded hull, a continuous main deck, and the addition of a pre-wetting system to wash away contaminants. The living spaces on the ship were part of a "citadel" which could be sealed off from contamination for the crew safety. The ships were sometimes referred to as "Cadillacs" for their relatively luxurious crew compartments; these were also the first Canadian warships to have a bunk for every crew member since previous warship designs had used hammocks.[6]
Two St. Laurent-class destroyers in their original configuration
Other innovative features not found on other ships of its time included an operations room separate from the bridge, from which the captain could command the ship while in combat, 12 separate internal telephone systems, air conditioning, and the latest advances in radar and sonar technology.[6]
The St. Laurent class originally called for 14 vessels to be commissioned no later than 1955; however, changing design specifications due to the rapidly changing Cold War naval environment, as well as Canada's wartime priorities during the Korean War, saw only the first 7 completed by 1957. The remaining 7 vessels were built as the follow-on Restigouche class to incorporate advancements in naval warship design in the preceding years.[7] There were also two essentially similar follow-on classes, the Mackenzie class (4 ships completed 1962–63) and the Annapolis class (2 ships, completed 1964), the latter completed as helicopter carrying destroyer escorts from the onset, and not converted later as were the seven St. Laurent-class ships.[8]
As built, the ships were 366 feet (112m)long overall with a beam of 42 feet (13m) and a draught of 13feet 2inches (4.01m).[9] The destroyer escorts displaced2,263 tonnes (2,227 long tons) standard and 2,800 tonnes (2,800 long tons) at deep load.[9][note 1] The destroyer escorts had a crew of 12 officers and 237 enlisted.[9]
Armament
The St. Laurent class was fitted with twin 3-inch (76mm)/L50calibre guns in two mounts for engaging both surface and air targets. The guns were capable of 85° elevation and could fire 50 rounds per minute up to 7.9 miles (12.7km). The ships were also fitted with two single-mounted Bofors 40 mm gun|40mm (1.6in) guns.[9] The class's anti-submarine armament consisted of a pair of triple-barreled Mk. NC 10 Limbo ASW mortars in a stern well. The stern well had a roller top to close it off from following seas. As with the British Type 12 design, the provision for long-range homing torpedoes (in this case BIDDER [Mk 20E] or the US Mark 35 were included. However, they were never fitted.[5]
As built, the twin 3-inch anti-aircraft mounts were installed without shields. These were added in 1963. The gun housings are fibreglass.[note 2]
Machinery
The vessels of the St. Laurent class had two Babcock & Wilcox water tube boilers installed[9] providing 600psi (4,100kPa), 42 (kgf/cm²) at 850°F (454.4°C).[10]
The steam produced by these boilers was directed at two geared steam turbines which powered two shafts, providing 22,000 kilowatts (30,000shp) to drive the ship at a maximum speed of 28.5 knots (52.8km/h).[7] By the early 1990s, the quoted maximum speed was only 27 knots (50km/h).[10] The ships had an endurance of 4,570 nautical miles (8,460km) at 12 knots (22km/h).[9]
The propelling machinery was of British design. Yarrow & Co Ltd, Scotstoun, Glasgow, received an order from Canadian Vickers for the supply of a complete set of machinery for St. Laurent, the other ships being supplied with machinery manufactured in Canada. The main turbines and machinery were of English Electric design.[7]
DDH conversion
The advent of nuclear-powered attack submarines in the late 1950s prompted RCN leaders to assess the new threat they posed.[8] Although these craft were noisier than older submarines and could therefore be detected at longer ranges, they were also capable of 30 knots (56km/h) while submerged, which was faster than the top speed of the St. Laurents at 28.5 knots (52.8km/h). Some RCN leaders harbored serious doubts that the destroyers could effectively pursue and destroy such fast vessels, even when operating in pairs. During a 25 February 1959 meeting of the Naval Board, it was decided that the Navy would counter the new threat by outfitting destroyers for helicopter operation.[11]
The RCN had examined the feasibility of operating ASW helicopters from small escorts when it modified the Prestonian classHMCSBuckingham in mid-1956[12] with a temporary helicopter landing platform fitted the quarterdeck.[13] Trials held in October 1956[12] using a Sikorsky HO4S-3 were successful,[14] and a larger temporary helicopter landing platform was installed in the new destroyer escort HMCSOttawa in August 1957.[15] Operational trials were conducted using an RCAFSikorsky S-58, a substantially larger and heavier aircraft than the HO4S, and the success of these tests led to approval of the concept.[14][16]
To achieve the goal, the RCN needed a helicopter capable of all-weather day-and-night operations with a heavy weapons load—capabilities the HO4S lacked—and a means to handle and secure the aircraft on the landing platform in rough seas. Trials showed landing was not the major concern: deck handling was. Manpower alone was insufficiently quick or certain in all conditions.[14] During the 1957 trials aboard Ottawa, it had taken 30 tense minutes to secure the S-58 to the deck during nighttime operations in rough seas.[16] The deck handling issue was addressed by the invention of the beartrap. The Navy came up with the solution, and contracted Fairey Aviation of Dartmouth, Nova Scotia, to produce it. Fairey's prototype was installed in Assiniboine during her 1962–63 conversion.[14] By keeping the aircraft secure, the beartrap eliminated the need for deck handling from landing to the hangar, or from hangar to takeoff.[14]
Margaree with helicopter platform added
In the conversion to a helicopter-carrying vessel, Assiniboine was gutted except for machinery and some forward spaces. The hull was strengthened, fuelling facilities for the helicopter and activated fin stabilizers installed. The fin stabilizers were to reduce roll in rough weather during helicopter operations.[8] All seven St Laurents were fitted with helicopter platforms and SQS 504 Variable Depth Sonar (VDS). St Laurent was equipped with VDS late in 1961, the helicopter platform to be added later. When ships were fitted with the helicopter platform, the single funnel was altered to twin stepped funnels to permit the forward extension of the helicopter hangar.[7] To make room for the helicopter deck, the aft 3-inch mount and one of the Limbos were removed.[8][4] The two 40mm guns were also removed.[4] Following the conversion, the displacement remained the same at standard load but at full load, it increased to 3,051 tonnes (3,003 long tons).[9]
Assiniboine was the first in the class to receive the full upgrade, re-commissioning as a DDH on 28 June 1963.[7] On 27 November 1963, her new platform was used for the first operational landing of a production CHSS-2 Sea King, and her beartrap landing system was used operationally for the first time a week later.[18]
DELEX program
In the late 1970s, under the Destroyer Life Extension (DELEX) program was commissioned to upgrade ten of the St. Laurent-class ships with new electronics, machinery, and hull upgrades and repairs. However, only enough was done to keep the ships in service into the late 1980s. For the St. Laurents, this meant hull and machinery repairs only.[19]
Ships
Note that the pennant numbers were originally prefixed with the classification symbol DDE but were changed to DDH in the early 1960s.[2][4]
All seven ships were laid down between November 1950 and May 1952. All seven ships were completed by October 1957.[9]Assiniboine joined the RCN at Halifax, Nova Scotia following her commissioning and spent the next two years on the east coast. In 1959, the ship transferred to the west coast and served there until being taken out of service in 1962 for conversion to a helicopter-carrying destroyer, the first of the class to go through the process.[20]Fraser after commissioning in 1957 spent the first six years of her career on the west coast. During this period she aided the yachtRedwitch in 1960 and Yaqui Queen in 1964. In 1965, Fraser was subjected to shock tests off Hawaii to test the survival capabilities of the class. The destroyer escort then sailed to the Vickers shipyard in Montreal to undergo conversion to a DDH.[21] Following her commissioning, Margaree was assigned to the west coast. She made port visits and participated in several naval exercises before undergoing her conversion to a DDH at Victoria Machinery Depot, Victoria, British Columbia.[22]
Significance
In 1997, the Historic Sites and Monuments Board of Canada recognized the St. Laurent class as being historically significant to Canadians and in 2000[23] installed a bronze plaque aboard Fraser which read:
St. Laurent Class of Canadian Warship
The pride of the Canadian Navy during the Cold War, these anti-submarine escorts were the first naval vessels conceived and built in Canada. Designed in 1948–1949, they influenced naval construction internationally with their smooth above-water surfaces and distinctive convex deck. They could also be sealed to protect crews against biological and radioactive threats. All seven St. Laurent-class ships were modified during the 1960s to carry helicopters and enhance their anti-submarine capability. Launched in 1953, HMCS Fraser is the last surviving example of this innovative class of warship.
—National Historic Site plaque
Related Research Articles
The history of the Royal Canadian Navy goes back to 1910, when the naval force was created as the Naval Service of Canada and renamed a year later by King George V. The Royal Canadian Navy (RCN) is one of the three environmental commands of the Canadian Forces. Over the course of its history, the RCN has played a role in the First World War, contributed significantly to the Battle of the Atlantic during the Second World War, and was a part of NATO's force buildup during the Cold War. In 1968, the RCN was amalgamated with the Canadian Army and the Royal Canadian Air Force to form what is today the unified Canadian Armed Forces. The naval force was known as Maritime Command until 2011, when the environmental command was renamed as the Royal Canadian Navy.
The Sikorsky CH-124 Sea King is a twin-engined anti-submarine warfare (ASW) helicopter designed for shipboard use by Canadian naval forces, based on the US Navy's SH-3 Sea King. Most CH-124s were assembled in Quebec by United Aircraft of Canada. The CH-124 served with the Royal Canadian Navy (RCN) and Canadian Armed Forces from 1963 to 2018.
HMCS Yukon was a Mackenzie-class destroyer that served in the Royal Canadian Navy (RCN) and later the Canadian Forces. She was the first Canadian naval unit to carry the name. She was named for the Yukon River that runs from British Columbia through Yukon and into Alaska in the United States.
HMCS Nipigon was an Annapolis-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces. She was the second Canadian naval unit to carry this name. Entering service in 1964, she was named for the Nipigon River that flows through Ontario.
HMCS Assiniboine was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1956 to 1988. She was the second ship to bear the name. Entering service in 1956, the ship underwent conversion to a destroyer helicopter escort (DDH) in 1962, the conversion performed primarily by Victoria Machinery Depot. She was officially reclassed with pennant DDH 234 on 28 June 1963. After being paid off in 1988, the vessel was used as a harbour training ship until being discarded in 1995. The vessel sank under tow to the breakers that year.
HMCS Annapolis was an Annapolis-class destroyer that served in the Royal Canadian Navy and later, the Canadian Forces. She was the second Canadian naval unit to carry this name. Named for the Annapolis River that flows through Nova Scotia, the ship entered service in 1964, the last of the St. Laurent-class design. Serving through the Cold War, Annapolis was decommissioned in 1998 before going through a protracted legal battle for use as an artificial reef. She was finally scuttled as such in 2015 off the coast of British Columbia.
HMCS Fraser was a St. Laurent-class destroyer that served in the Royal Canadian Navy (RCN) and later the Canadian Forces from 1957–1994. Fraser was the last survivor of the St. Laurent-class destroyer, which were the first Canadian designed and built warships.
HMCS Mackenzie was a Mackenzie-class destroyer that served in the Royal Canadian Navy (RCN) and later the Canadian Forces. She was the lead ship of her class and is the first Canadian naval unit to carry this name. The ship was named for the Mackenzie River, the largest river system in Canada and runs primarily through the Northwest Territories.
HMCS Saguenay was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1956–1990. She was the second vessel in her class and the second Canadian naval unit to carry the name HMCS Saguenay. After being discarded by the Canadian Forces, the ship was sunk as an artificial reef off the coast of Nova Scotia.
The Restigouche-class destroyer was a class of seven destroyer escorts that served the Royal Canadian Navy and later the Canadian Forces from the late-1950s to the late-1990s. All seven vessels in the class were named after rivers in Canada.
HMCS Skeena was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1957–1993. Skeena was constructed as a destroyer escort and was converted in the 1960s to a helicopter-carrying destroyer. In 1972, the ship was designated a French Language Unit, the second in Canadian service. Discarded in 1994, the ship was broken up in India.
HMCS Ottawa was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1956 to 1992. Ottawa was the first bilingual ship to serve in the Canadian navy.
The Mackenzie-class destroyer was a class of warship used by the Royal Canadian Navy and Canadian Forces from the 1960s–1990s. Six such ships were envisioned, of which four were completed to this specification. The last two hulls were completed to the post DDH conversion St. Laurent-class design ; they were designated as the Annapolis class instead. The four Mackenzie-class destroyers spent most of their service in the Pacific Ocean, used primarily in a training role. Their only significant update was the DELEX program, which was completed between 1982 and 1985 and updated their navigational radar and their sonar.
HMCS Saskatchewan was a Mackenzie-class destroyer that served in the Royal Canadian Navy (RCN) and later the Canadian Forces. She was the second Canadian naval unit to bear the name HMCS Saskatchewan. The ship was named for the Saskatchewan River which runs from Saskatchewan to Manitoba in Canada.
The Annapolis-class destroyer escort was a two-ship class of destroyer escorts that saw service with the Royal Canadian Navy and Canadian Forces from the 1960s to the 1990s. The final version of the St. Laurent-class design, the class was used extensively for anti-submarine warfare purposes. Both ships were sunk as artificial reefs after being retired, one on each coast of Canada.
The River class was a class of fourteen destroyers of the Royal Canadian Navy (RCN) that served before and during the Second World War. They were named after Canadian rivers.
HMCS St. Laurent was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1955–1974. She was the lead ship of her class, the first modern warship designed and built in Canada.
HMCS Margaree was a St. Laurent-class destroyer that served in the Royal Canadian Navy and later the Canadian Forces from 1957–1992. She underwent conversion to a destroyer helicopter escort (DDH) in the mid-1960s and was officially reclassed with pennant DDH 230 on 15 October 1965. The vessel served until 1992 when it was discarded, sold for scrap and broken up in 1994.
The Prestonian-class ocean anti-submarine escort frigate was a class of 21 frigates that served with the Royal Canadian Navy from 1953–1967 and with the Royal Norwegian Navy from 1956–1977.
HMCS Buckingham was a River-class frigate that served with the Royal Canadian Navy during the Second World War and as a Prestonian-class frigate from 1954–1965. She was named for Buckingham, Quebec. She is considered a significant part of Canadian naval history as used for some early trials of helicopter landings on smaller escort vessels. This led to the development of the future helicopter carrying destroyers.
References
Notes
↑ Conway's says 2000 tons standard displacement, 2600 deep load.
↑ Jane's Fighting Ships 1963–64 shows photographs taken in 1962 and 1963 respectively of Skeena and Assiniboine with these.
Barrie, Ron; Macpherson, Ken (1996). Cadillac of Destroyers: HMCS St. Laurent and Her Successors. St. Catharines, Ontario: Vanwell Publishing Limited. ISBN1-55125-036-5.
Soward, Stuart E. Hands to Flying Stations, a Recollective History of Canadian Naval Aviation, Volume II. Victoria, British Columbia: Neptune Developments, 1995. ISBN0-9697229-1-5.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
Canadian Forces 
