This article has multiple issues. Please help improve it or discuss these issues on the talk page . (Learn how and when to remove these messages)
|
In stereochemistry, a stereocenter of a molecule is an atom (center), axis or plane that is the focus of stereoisomerism; that is, when having at least three different groups bound to the stereocenter, interchanging any two different groups creates a new stereoisomer. [1] [2] Stereocenters are also referred to as stereogenic centers.
A stereocenter is geometrically defined as a point (location) in a molecule; a stereocenter is usually but not always a specific atom, often carbon. [2] [3] Stereocenters can exist on chiral or achiral molecules; stereocenters can contain single bonds or double bonds. [1] The number of hypothetical stereoisomers can be predicted by using 2n, with n being the number of tetrahedral stereocenters; however, exceptions such as meso compounds can reduce the prediction to below the expected 2n. [4]
Chirality centers are a type of stereocenter with four different substituent groups; chirality centers are a specific subset of stereocenters because they can only have sp3 hybridization, meaning that they can only have single bonds. [5]
Stereocenters can exist on chiral or achiral molecules. They are defined as a location (point) within a molecule, rather than a particular atom, in which the interchanging of two groups creates a stereoisomer. [3] A stereocenter can have either four different attachment groups, or three different attachment groups where one group is connected by a double bond. [1] Since stereocenters can exist on achiral molecules, stereocenters can have either sp3 or sp2 hybridization.
Stereoisomers are compounds that are identical in composition and connectivity but have a different spatial arrangement of atoms around the central atom. [6] A molecule having multiple stereocenters will produce many possible stereoisomers. In compounds whose stereoisomerism is due to tetrahedral (sp3) stereogenic centers, the total number of hypothetically possible stereoisomers will not exceed 2n, where n is the number of tetrahedral stereocenters. However, this is an upper bound because molecules with symmetry frequently have fewer stereoisomers.
The stereoisomers produced by the presence of multiple stereocenters can be defined as enantiomers (non-superposable mirror images) and diastereomers (non-superposable, non-identical, non-mirror image molecules). [6] Enantiomers and diastereomers are produced due to differing stereochemical configurations of molecules containing the same composition and connectivity (bonding); the molecules must have multiple (two or more) stereocenters to be classified as enantiomers or diastereomers. Enantiomers and diastereomers will produce individual stereoisomers that contribute to the total number of possible stereoisomers.
However, the stereoisomers produced may also give a meso compound, which is an achiral compound that is superposable on its mirror image; the presence of a meso compound will reduce the number of possible stereoisomers. [4] Since a meso compound is superposable on its mirror image, the two "stereoisomers" are actually identical. Resultantly, a meso compound will reduce the number of stereoisomers to below the hypothetical 2n amount due to symmetry. [6]
Additionally, certain configurations may not exist due to steric reasons. Cyclic compounds with chiral centers may not exhibit chirality due to the presence of a two-fold rotation axis. Planar chirality may also provide for chirality without having an actual chiral center present.
Configuration is defined as the arrangement of atoms around a stereocenter. [6] The Cahn-Ingold-Prelog (CIP) system uses R and S designations to define the configuration of atoms about any stereocenter. [7] A designation of R denotes a clockwise direction of substituent priority around the stereocenter, while a designation of S denotes a counter-clockwise direction of substituent priority. [7]
A chirality center (chiral center) is a type of stereocenter. A chirality center is defined as an atom holding a set of four different ligands (atoms or groups of atoms) in a spatial arrangement which is non-superposable on its mirror image. Chirality centers must be sp3 hybridized, meaning that a chirality center can only have single bonds. [5] In organic chemistry, a chirality center usually refers to a carbon, phosphorus, or sulfur atom, though it is also possible for other atoms to be chirality centers, especially in areas of organometallic and inorganic chemistry.
The concept of a chirality center generalizes the concept of an asymmetric carbon atom (a carbon atom bonded to four different entities) to a broader definition of any atom with four different attachment groups in which an interchanging of any two attachment groups gives rise to an enantiomer. [8]
A carbon atom that is attached to four different substituent groups is called an asymmetric carbon atom or chiral carbon. Chiral carbons are the most common type of chirality center. [6]
Chirality is not limited to carbon atoms, though carbon atoms are often centers of chirality due to their ubiquity in organic chemistry. Nitrogen and phosphorus atoms can also form bonds in a tetrahedral configuration. A nitrogen in an amine may be a stereocenter if all three groups attached are different because the electron pair of the amine functions as a fourth group. [9] However, nitrogen inversion, a form of pyramidal inversion, causes racemization which means that both epimers at that nitrogen are present under normal circumstances. [9] Racemization by nitrogen inversion may be restricted (such as quaternary ammonium or phosphonium cations), or slow, which allows the existence of chirality. [9]
Metal atoms with tetrahedral or octahedral geometries may also be chiral due to having different ligands. For the octahedral case, several chiralities are possible. Having three ligands of two types, the ligands may be lined up along the meridian, giving the mer-isomer, or forming a face—the fac isomer. Having three bidentate ligands of only one type gives a propeller-type structure, with two different enantiomers denoted Λ and Δ.
As mentioned earlier, the requirement for an atom to be a chirality center is that the atom must be sp3 hybridized with four different attachments. [5] Because of this, all chirality centers are stereocenters. However, only under some conditions is the reverse true. Recall that a point can be considered a sterocenter with a minimum of three attachment points; stereocenters can be either sp3 or sp2 hybridized, as long as the interchanging any two different groups creates a new stereoisomer. This means that although all chirality centers are stereocenters, not every stereocenter is a chirality center.
Stereocenters are important identifiers for chiral or achiral molecules. As a general rule, if a molecule has no stereocenters, it is considered achiral. If it has at least one stereocenter, the molecule has the potential for chirality. However, there are some exceptions like meso compounds that make molecules with multiple stereocenters considered achiral. [6]
In organic chemistry, the Cahn–Ingold–Prelog (CIP) sequence rules are a standard process to completely and unequivocally name a stereoisomer of a molecule. The purpose of the CIP system is to assign an R or S descriptor to each stereocenter and an E or Z descriptor to each double bond so that the configuration of the entire molecule can be specified uniquely by including the descriptors in its systematic name. A molecule may contain any number of stereocenters and any number of double bonds, and each usually gives rise to two possible isomers. A molecule with an integer n describing the number of stereocenters will usually have 2n stereoisomers, and 2n−1 diastereomers each having an associated pair of enantiomers. The CIP sequence rules contribute to the precise naming of every stereoisomer of every organic molecule with all atoms of ligancy of fewer than 4.
In stereochemistry, stereoisomerism, or spatial isomerism, is a form of isomerism in which molecules have the same molecular formula and sequence of bonded atoms (constitution), but differ in the three-dimensional orientations of their atoms in space. This contrasts with structural isomers, which share the same molecular formula, but the bond connections or their order differs. By definition, molecules that are stereoisomers of each other represent the same structural isomer.
Stereochemistry, a subdiscipline of chemistry, studies the spatial arrangement of atoms that form the structure of molecules and their manipulation. The study of stereochemistry focuses on the relationships between stereoisomers, which by definition have the same molecular formula and sequence of bonded atoms (constitution), but differ in the geometric positioning of the atoms in space. For this reason, it is also known as 3D chemistry—the prefix "stereo-" means "three-dimensionality".
In chemistry, an enantiomer – also called optical isomer, antipode, or optical antipode – is one of two stereoisomers that are nonsuperposable onto their own mirror image. Enantiomers of each other are much like one's right and left hands; without mirroring one of them, hands cannot be superposed onto each other. It is solely a relationship of chirality and the permanent three-dimensional relationships among molecules or other chemical structures: no amount of re-orientiation of a molecule as a whole or conformational change converts one chemical into its enantiomer. Chemical structures with chirality rotate plane-polarized light. A mixture of equal amounts of each enantiomer, a racemic mixture or a racemate, does not rotate light.
In chemistry, racemization is a conversion, by heat or by chemical reaction, of an optically active compound into a racemic form. This creates a 1:1 molar ratio of enantiomers and is referred to as a racemic mixture. Plus and minus forms are called Dextrorotation and levorotation. The D and L enantiomers are present in equal quantities, the resulting sample is described as a racemic mixture or a racemate. Racemization can proceed through a number of different mechanisms, and it has particular significance in pharmacology as different enantiomers may have different pharmaceutical effects.
In chemistry, the Fischer projection, devised by Emil Fischer in 1891, is a two-dimensional representation of a three-dimensional organic molecule by projection. Fischer projections were originally proposed for the depiction of carbohydrates and used by chemists, particularly in organic chemistry and biochemistry. The use of Fischer projections in non-carbohydrates is discouraged, as such drawings are ambiguous and easily confused with other types of drawing. The main purpose of Fischer projections is to show the chirality of a molecule and to distinguish between a pair of enantiomers. Some notable uses include drawing sugars and depicting isomers.
In stereochemistry, diastereomers are a type of stereoisomer. Diastereomers are defined as non-mirror image, non-identical stereoisomers. Hence, they occur when two or more stereoisomers of a compound have different configurations at one or more of the equivalent (related) stereocenters and are not mirror images of each other. When two diastereoisomers differ from each other at only one stereocenter, they are epimers. Each stereocenter gives rise to two different configurations and thus typically increases the number of stereoisomers by a factor of two.
A meso compound or meso isomer is an optically inactive isomer in a set of stereoisomers, at least two of which are optically active. This means that despite containing two or more stereocenters, the molecule is not chiral. A meso compound is superposable on its mirror image. Two objects can be superposed if all aspects of the objects coincide and it does not produce a "(+)" or "(-)" reading when analyzed with a polarimeter. The name is derived from the Greek mésos meaning “middle”.
In organic chemistry, butyl is a four-carbon alkyl radical or substituent group with general chemical formula −C4H9, derived from either of the two isomers (n-butane and isobutane) of butane.
In chemistry, a molecule or ion is called chiral if it cannot be superposed on its mirror image by any combination of rotations, translations, and some conformational changes. This geometric property is called chirality. The terms are derived from Ancient Greek χείρ (cheir) 'hand'; which is the canonical example of an object with this property.
In chemistry, stereoselectivity is the property of a chemical reaction in which a single reactant forms an unequal mixture of stereoisomers during a non-stereospecific creation of a new stereocenter or during a non-stereospecific transformation of a pre-existing one. The selectivity arises from differences in steric and electronic effects in the mechanistic pathways leading to the different products. Stereoselectivity can vary in degree but it can never be total since the activation energy difference between the two pathways is finite: both products are at least possible and merely differ in amount. However, in favorable cases, the minor stereoisomer may not be detectable by the analytic methods used.
In chemistry, axial chirality is a special case of chirality in which a molecule contains two pairs of chemical groups in a non-planar arrangement about an axis of chirality so that the molecule is not superposable on its mirror image. The axis of chirality is usually determined by a chemical bond that is constrained against free rotation either by steric hindrance of the groups, as in substituted biaryl compounds such as BINAP, or by torsional stiffness of the bonds, as in the C=C double bonds in allenes such as glutinic acid. Axial chirality is most commonly observed in substituted biaryl compounds wherein the rotation about the aryl–aryl bond is restricted so it results in chiral atropisomers, as in various ortho-substituted biphenyls, and in binaphthyls such as BINAP.
In stereochemistry, prochiral molecules are those that can be converted from achiral to chiral in a single step. An achiral species which can be converted to a chiral in two steps is called proprochiral.
Atropisomers are stereoisomers arising because of hindered rotation about a single bond, where energy differences due to steric strain or other contributors create a barrier to rotation that is high enough to allow for isolation of individual conformers. They occur naturally and are important in pharmaceutical design. When the substituents are achiral, these conformers are enantiomers (atropoenantiomers), showing axial chirality; otherwise they are diastereomers (atropodiastereomers).
The molecular configuration of a molecule is the permanent geometry that results from the spatial arrangement of its bonds. The ability of the same set of atoms to form two or more molecules with different configurations is stereoisomerism. This is distinct from constitutional isomerism which arises from atoms being connected in a different order. Conformers which arise from single bond rotations, if not isolatable as atropisomers, do not count as distinct molecular configurations as the spatial connectivity of bonds is identical.
Asymmetric induction describes the preferential formation in a chemical reaction of one enantiomer or diastereoisomer over the other as a result of the influence of a chiral feature present in the substrate, reagent, catalyst or environment. Asymmetric induction is a key element in asymmetric synthesis.
In stereochemistry, topicity is the stereochemical relationship between substituents and the structure to which they are attached. Depending on the relationship, such groups can be heterotopic, homotopic, enantiotopic, or diastereotopic.
Chirality is a property of asymmetry important in several branches of science. The word chirality is derived from the Greek χείρ (kheir), "hand", a familiar chiral object.
In chemical nomenclature, a descriptor is a notational prefix placed before the systematic substance name, which describes the configuration or the stereochemistry of the molecule. Some of the listed descriptors should not be used in publications, as they no longer accurately correspond with the recommendations of the IUPAC. Stereodescriptors are often used in combination with locants to clearly identify a chemical structure unambiguously.
Chemical compounds that come as mirror-image pairs are referred to by chemists as chiral or handed molecules. Each twin is called an enantiomer. Drugs that exhibit handedness are referred to as chiral drugs. Chiral drugs that are equimolar (1:1) mixture of enantiomers are called racemic drugs and these are obviously devoid of optical rotation. The most commonly encountered stereogenic unit, that confers chirality to drug molecules are stereogenic center. Stereogenic center can be due to the presence of tetrahedral tetra coordinate atoms (C,N,P) and pyramidal tricoordinate atoms (N,S). The word chiral describes the three-dimensional architecture of the molecule and does not reveal the stereochemical composition. Hence "chiral drug" does not say whether the drug is racemic, single enantiomer or some other combination of stereoisomers. To resolve this issue Joseph Gal introduced a new term called unichiral. Unichiral indicates that the stereochemical composition of a chiral drug is homogenous consisting of a single enantiomer.