Union Pacific 737

Last updated
Union Pacific 737
UnionPacific737in1890.jpg
UP No. 737, Ca. 1890
Type and origin
Power typeSteam
Builder Baldwin Locomotive Works
Serial number8395
Build date1887
Specifications
Configuration:
   Whyte 4-4-0
   UIC 2′B n2
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.62 in (1,575 mm)
Adhesive weight 62,000 lb (28,100 kg)
Fuel capacity Coal: 8 short tons (7.1 long tons; 7.3 t) as built, 14 short tons (13 long tons; 13 t) rebuilt
Fuel oil: 4,000 US gal (15,000 L; 3,300 imp gal)
Water cap.2,000 US gal (7,600 L; 1,700 imp gal)
Boiler pressure160 lbf/in2 (1.10 MPa)
Cylinders Two
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Performance figures
Tractive effort 18,478 lbf (82.19 kN)
Career
Operators Union Pacific Railroad, Southern Pacific Railroad, Erath Sugar Company, Vermilion Sugar Company
Class UP 600–700, SP E-21
Numbers737, renumbered 246 in 1904, 216 in 1913
Delivered1887
Retired1956 (revenue service)
Current owner Double-T Agricultural Museum
DispositionOn static display

Union Pacific Railway Engine No. 737 or UP 737 is a 4-4-0 "American" type steam locomotive. It is currently the oldest preserved Union Pacific steam locomotive. It was originally acquired by the Union Pacific Railroad (UP) in 1887.

Contents

History

UP 737 began its career as part of one of the largest locomotive orders on record up to that date, for use on Union Pacific passenger and freight trains. As delivered, the locomotive had a long, pointed, vertical bar wooden pilot, an oil "box" headlight, a "diamond" stack of the shallow diamond style peculiar to the Union Pacific at that period. It had steam and sand domes that appeared comparatively square in profile and lacked the common, ornate, cast-iron dome "rings," a decorative molding that dressed up the appearance of such domes and that many 19th century locomotives sported. Upon entering service, the locomotive reportedly had the initials "O.& R.V." painted on the small panel below the windows on each side of the cab, standing for the name of a Union Pacific subsidiary in Nebraska, the Omaha and Republican Valley Railway. Later the locomotive had "Union Pacific" spelled out in small letters on each side of the cab, probably in white, and a large white "737" on each side of its black tender.

Union Pacific Railroad elevation showing the original configuration of Union Pacific #737. From the Union Pacific Railroad Folio Locomotive Diagram Book No. 200, issued in 1897 (courtesy Union Pacific Railroad). Union Pacific 737 Blueprint.jpg
Union Pacific Railroad elevation showing the original configuration of Union Pacific #737. From the Union Pacific Railroad Folio Locomotive Diagram Book No. 200, issued in 1897 (courtesy Union Pacific Railroad).

In August 1904 (different sources disagree on the date), the Union Pacific Railroad sold Locomotive No. 737 and a few similar 4-4-0s to either Charles Morgan's Louisiana and Texas Railroad and Steamship Company or the Texas and New Orleans Railroad, both of them components of the Southern Pacific System. A Union Pacific Railroad folio locomotive diagram book issued in 1911 showed engines of this class as having had their diamond stacks replaced with straight or "shotgun" stacks, but whether that change had been made before the sale of Locomotive No. 737 is not known.

Locomotive No. 737 and some of her sisters migrated southward about 1904 to the Texas and Louisiana lines of the Southern Pacific System, such as the Galveston, Harrisburg and San Antonio Railway, the Texas and New Orleans Railroad, and Morgan's Louisiana and Texas Railroad and Steamship Company. According to one source, No. 737 became No. 246, lettered "Morgan's Louisiana and Texas." Other sources suggest that it became a Texas and New Orleans Railroad locomotive. The Southern Pacific Company owned or controlled both of these Texas-Louisiana railroads, but the question of which subsidiary owned No. 246 is not unimportant, because it would have determined how the locomotive was lettered. In 1913, in a renumbering and reorganization of motive power, the Southern Pacific Company gave the locomotive its final number: No. 246 became No. 216. At the time, the locomotive probably was lettered "Southern Pacific Lines" in large white letters on her tender, with the number on the cab and the small initials to indicate the actual Southern Pacific subsidiary that owned her.

Union Pacific 742 (an identical sister of Union Pacific 737) showing the original appearance of the fireman's side. Union Pacific 742 (an identical sister of Union Pacific 737).jpg
Union Pacific 742 (an identical sister of Union Pacific 737) showing the original appearance of the fireman's side.

During the first quarter of the 20th century, the owning railroads made a number of important modifications to Engine 246, later 216. By the end of 1904, subsequent to Congress passing a safety act that mandated the change, the Southern Pacific converted the locomotive's link and pin coupling equipment to automatic "knuckle" couplers, possibly of the Janney type. At unknown dates, a number of other changes followed as the locomotive experienced further modernizations quite common on railroads across the country during that time. Mechanics and boilermakers replaced the original short smokebox with an extended smokebox with shotgun stack. It was almost certainly on the Southern Pacific Lines that the shops converted the locomotive from a coal burner to an oil burner. An oil tank was installed in the tender in place of the coal bin and hoses and pipes to feed oil to the firebox were rigged, with suitable controls and probably modification of the firebox grates. Thus the locomotive could exploit Texas and Louisiana petroleum for fuel. A steel pipe or "boiler tube" pilot replaced the original wooden type of cowcatcher. An all-steel cab replaced the original Baldwin wooden cab. A new and different headlight replaced the old kerosene "box" headlight.

Locomotive No. 216 was retired on December 4, 1929 retired from active service on a major railroad system when it was sold by Southern Pacific Company to Erath Sugar for industrial use in the cane fields of Louisiana. In August 1947, Erath Sugar transferred ownership of No. 216 to the Vermilion Sugar Company at Abbeville, Louisiana. The Vermilion Sugar Company retired No. 216 in 1956.

Restoration

A New England seafood processor, F. Nelson Blount, bought the locomotive for his Steamtown, U.S.A. collection in 1957. To move the locomotive to Vermont on a flat car, it was necessary to cut off the roof of the steel cab to meet height clearance requirements, but Steamtown retained the cab roof, and moved it to Bellows Falls, Vermont. It was relocated in 1984 to the former Delaware, Lackawanna and Western Railroad's Scranton Yards at Scranton, Pennsylvania under the auspices of the Steamtown Foundation.

Union Pacific 737 on display at Steamtown, USA, after the 1970 restoration. Jss4.jpg
Union Pacific 737 on display at Steamtown, USA, after the 1970 restoration.

In 1970, Steamtown began an ill-conceived attempt to cosmetically restore the engine. A replica box headlight was installed, and a wooden cab was built overtop of the existing steel cab. Most significantly, a diamond stack replica was installed on the engine. This diamond stack was much shorter than the one the engine originally carried, and was of a different design from the original. Thus, the restored 737 bore little resemblance not only to its original form, but any form it had assumed during its service life.

On October 30, 1986 the U.S. Congress passed legislation creating Steamtown National Historic Site as a unit of the National Park Service, Department of the Interior. The newly created Park is located in the former Delaware, Lackawanna and Western Railroad yards in Scranton, Pennsylvania. In 1989, the Steamtown Foundation donated the remaining railroad collection, including UP 737, to the National Park Service. The National Park Service removed this locomotive from its property listings in August 1995 when it was donated to the Nevada Southern Railroad Museum at Boulder City, Nevada. The NSRM loaned the 737 to the Western Pacific Railroad Museum in Portola, who later acquired full ownership of the engine.

In 2004, the WPRRM traded the UP 737 to the Double-T Agricultural Museum in Stevinson, CA, where presently remains on static display. The engine was cosmetically restored to its 1914 appearance as Southern Pacific 216, with the straight, shotgun style smokestack, as well as the electric headlight and restored steel cab.

Related Research Articles

<span class="mw-page-title-main">Union Pacific Big Boy</span> Type of American simple articulated 4-8-8-4 loco

The Union Pacific Big Boy is a type of simple articulated 4-8-8-4 steam locomotive manufactured by the American Locomotive Company (ALCO) between 1941 and 1944 and operated by the Union Pacific Railroad in revenue service until 1962.

The Pennsylvania Railroad's class K5 were experimental 4-6-2 "Pacific" types, built in 1929 to see if a larger Pacific than the standard K4s was worthwhile. Two prototypes were built, #5698 at the PRR's own Altoona Works, and #5699 by the Baldwin Locomotive Works. Although classified identically, the two locomotives differed in many aspects, as detailed below. They were both fitted with a much fatter boiler than the K4s, but dimensionally similar to those of the I1s 2-10-0 "Decapods". Most other dimensions were enlarged over the K4s as well; the exceptions being the 70 square feet (6.5 m2) grate area and the 80 in (2.032 m) drivers.

<span class="mw-page-title-main">4-4-4</span> Locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, 4-4-4 represents the wheel arrangement of four leading wheels on two axles, four powered and coupled driving wheels on two axles, and four trailing wheels on two axles. In the United States, this arrangement was named the Reading type, since the Philadelphia and Reading Railroad was the first to use it. In Canada, this type is known as the Jubilee.

<span class="mw-page-title-main">EMD FP7</span> Model of 1500 hp North American diesel cab locomotive

The EMD FP7 is a 1,500 horsepower (1,100 kW), B-B dual-service passenger and freight-hauling diesel locomotive produced between June 1949 and December 1953 by General Motors' Electro-Motive Division and General Motors Diesel. Final assembly was at GM-EMD's La Grange, Illinois plant, excepting locomotives destined for Canada, in which case final assembly was at GMD's plant in London, Ontario. The FP7 was essentially EMD's F7A locomotive extended by four feet to give greater water capacity for the steam generator for heating passenger trains.

<span class="mw-page-title-main">EMD SW1</span>

The EMD SW1 is a 600-horsepower (450 kW) diesel-electric switcher locomotive built by General Motors' Electro-Motive Corporation between December 1938 and November 1953. Final assembly was at EMD's plant at LaGrange (McCook) Illinois. The SW1 was the second generation of 3,402 cu in (55.75 L) switcher from EMD, succeeding the SC and SW. The most significant change from those earlier models was the use of an engine of EMD's own design, the then-new 567 engine, here in 600 hp (450 kW) V6 form. 661 locomotives of this design were built, with a gap in production between March 1943 and September 1945 due to World War II.

<span class="mw-page-title-main">4-8-8-2</span> Articulated locomotive wheel arrangement

Under the Whyte notation for the classification of steam locomotives, a 4-8-8-2 is a locomotive with four leading wheels, two sets of eight driving wheels, and a two-wheel trailing truck.

<span class="mw-page-title-main">Steamtown National Historic Site</span> Railroad museum in Scranton, Pennsylvania

Steamtown National Historic Site (NHS) is a railroad museum and heritage railroad located on 62.48 acres (25.3 ha) in downtown Scranton, Pennsylvania, at the site of the former Scranton yards of the Delaware, Lackawanna and Western Railroad (DL&W). The museum is built around a working turntable and a roundhouse that are largely replications of the original DL&W facilities; the roundhouse, for example, was reconstructed from remnants of a 1932 structure. The site also features several original outbuildings dated between 1899 and 1902. All the buildings on the site are listed with the National Register of Historic Places as part of the Delaware, Lackawanna and Western Railroad Yard-Dickson Manufacturing Co. Site.

<span class="mw-page-title-main">GE 44-ton switcher</span> Diesel-electric switcher locomotive (Built 1940-1956)

The GE 44-ton switcher is a four-axle diesel-electric locomotive built by General Electric between 1940 and 1956. It was designed for industrial and light switching duties, often replacing steam locomotives that had previously been assigned these chores.

<span class="mw-page-title-main">Lahaina, Kaanapali and Pacific Railroad</span> Transport company

The Lahaina, Kaanapali and Pacific Railroad (LKPRR) is a steam-powered, 3 ft narrow gauge heritage railroad in Lāhainā, Hawaii. The LKPRR operated the Sugar Cane Train, a 6-mile (9.7 km), 40-minute trip in open-air coaches pulled by vintage steam locomotives. The tracks connect Lahaina with Puukolii, stopping briefly at Kaanapali. A narrator points outs sites of interest during the trip, which crosses a 325-foot (99 m) curved wooden trestle whose elevation yields panoramic views of neighboring islands and the West Maui Mountains. The line is currently not operating and all equipment is stored west of Lahaina.

<span class="mw-page-title-main">Oil burner (engine)</span> Steam engine that uses oil as fuel

An oil burner engine is a steam engine that uses oil as its fuel. The term is usually applied to a locomotive or ship engine that burns oil to heat water, to produce the steam which drives the pistons, or turbines, from which the power is derived.

<span class="mw-page-title-main">Brooks-Scanlon Corporation 1</span>

Brooks-Scanlon Corporation No. 1 is a 2-6-2 steam locomotive at Steamtown National Historic Site in Pennsylvania. This type of locomotive is referred to as a Prairie-type locomotive. This locomotive was built specifically for the lumber industry and served several lumber firms in Florida.

<span class="mw-page-title-main">Meadow River Lumber Company 1</span>

Meadow River Lumber Company No. 1 is a Shay locomotive at Steamtown National Historic Site, in Scranton, Pennsylvania. This 2-truck Shay was built by Lima Locomotive Works in May 1910. This type of locomotive was used primarily by lumber and mining companies. Some were used by other industries and on short lines. This is one of 77 Shay locomotives preserved in the United States.

<span class="mw-page-title-main">St. Louis, Brownsville and Mexico Railway</span>

Chartered on June 6, 1903, the St. Louis, Brownsville & Mexico Railway was a 200-mile (321 km) U.S. railroad that operated from Brownsville, Texas, to Gulf Coast Junction in Houston, Texas. It served numerous towns and cities along its routes and operated a rail bridge between Brownsville and Matamoros, Tamaulipas, in junction with the Mexican government. The Brownie connected the citizens of Brownsville to nearby Corpus Christi for the first time on land rather than using water transportation.

<span class="mw-page-title-main">Steamtown, U.S.A.</span> Former museum in Vermont, United States

Steamtown, U.S.A., was a steam locomotive museum that ran steam excursions out of North Walpole, New Hampshire, and Bellows Falls, Vermont, from the 1960s to 1983. The museum was founded by millionaire seafood industrialist F. Nelson Blount. The non-profit Steamtown Foundation took over operations following his death in 1967. Because of Vermont's air quality regulations restricting steam excursions, declining visitor attendance, and disputes over the use of track, some pieces of the collection were relocated to Scranton, Pennsylvania in the mid-1980s and the rest were auctioned off. After the move, Steamtown continued to operate in Scranton but failed to attract the expected 200,000–400,000 visitors. Within two years the tourist attraction was facing bankruptcy, and more pieces of the collection were sold to pay off debt.

<span class="mw-page-title-main">Canadian Pacific 1293</span> Preserved CP G5d class 4-6-2 locomotive

Canadian Pacific 1293 is a class "G5d" 4-6-2 "Pacific" type steam locomotive built in June 1948 by the Canadian Locomotive Company for the Canadian Pacific Railway. Built for passenger service, 1293 served an eight-year career until being replaced by diesel locomotives where it was then retired in 1959. Purchased in 1964 by F. Nelson Blount for use at his Steamtown site in Bellows Falls, Vermont, 1293 was easily restored to operation for hauling fan trips for the general public. 1293 was later sold to the Ohio Central Railroad in 1996 for tourist train service. Today, the locomotive is out on display at the Age of Steam Roundhouse in Sugarcreek, Ohio.

Canadian Pacific 1278 is a class "G5d" 4-6-2 "Pacific" type steam locomotive built by the Canadian Locomotive Company for the Canadian Pacific Railway. After being retired from revenue service, the locomotive was purchased in 1965 by F. Nelson Blount for excursion trains at his Steamtown, U.S.A. collection. The locomotive was sold to Gettysburg Railroad in 1987, and it pulled excursion trains between Gettysburg and Biglerville, but it was subject to shoddy maintenance by inexperienced crews. The locomotive was retired from excursion service in 1995, after suffering a firebox explosion in June. As of 2024, the locomotive is on static display at the Age of Steam Roundhouse in Sugarcreek, Ohio.

<span class="mw-page-title-main">Illinois Central 790</span> Preserved 2-8-0 steam locomotive

Illinois Central No. 790 is a preserved steam locomotive, the only Illinois Central Railroad 2-8-0 Consolidation type of its class to survive into the diesel age of train transportation. It is part of the Steamtown National Historic Site collection in Scranton, Pennsylvania.

<span class="mw-page-title-main">Canadian Pacific 2317</span> Preserved CP G-3c class 4-6-2 locomotive

Canadian Pacific 2317 is a class "G-3c" 4-6-2 "Pacific" type steam locomotive built by the Montreal Locomotive Works for the Canadian Pacific Railway.

Bessemer and Lake Erie Railroad No. 643 is the sole survivor of the class H-1 2-10-4 "Texas type" steam locomotives built by the Baldwin Locomotive Works in 1944 for the Bessemer and Lake Erie Railroad, primarily used for hauling heavy mainline freight trains in Pennsylvania and Ohio, until retirement in 1952. It is now owned privately by the Age of Steam Roundhouse Museum in Sugarcreek, Ohio, which purchased No. 643 in 2019, and is currently in the process of being moved to Sugarcreek piece-by-piece from McKees Rocks, Pennsylvania.

References

PD-icon.svg This article incorporates public domain material from Union Pacific Railway NO. 737. National Park Service.