RV-14 | |
---|---|
RV-14A Prototype | |
Role | Kit aircraft |
National origin | United States |
Manufacturer | Van's Aircraft |
Designer | Richard VanGrunsven |
Introduction | July 2012 [1] |
Status | Kits in production |
Number built | 207 (November 2022) [2] |
Developed from | Van's Aircraft RV-10 |
The Van's Aircraft RV-14 is an American aerobatic kit aircraft designed by Richard VanGrunsven and produced by Van's Aircraft. It was introduced at AirVenture in July 2012. [1] The aircraft is supplied as a kit for amateur construction. [3] [4]
As of November 2022, 207 RV-14s have been completed and flown. [2]
Derived from the four-seat RV-10, RV-14 design work was commenced several years before its 2012 debut. It is an aerobatic two-seater designed to accommodate large pilots and offer greater baggage space, to comply with the US experimental amateur-built aircraft rules. The design goals included improved visibility, a wider cabin, a low landing speed achieved by larger and more effective flaps, good rate-of-climb and glide ratio, landing gear that meets FAR Part 23 certification standards and an airframe designed to accommodate the Lycoming IO-390 powerplant. It features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed tricycle landing gear and a single engine in tractor configuration. [3] [4]
The RV-14 is built from aluminum sheet. The prototype was fitted with a 210 hp (157 kW) Lycoming IO-390 four-stroke powerplant. The kit is intended to be easier to assemble than earlier Van's designs through the use of pre-punched and pre-formed fuselage longerons, pre-installed wiring, plug-in avionics, a pre-trimmed and ready-to-install bubble canopy, pre-welded canopy frame, pre-fitted engine baffles as well as matched pre-punched holes. The RV-14 offers several instrument panel choices, including one designed to take modern electronic flight instrument systems (EFIS), like the Dynon SkyView, without any additional cutting, as well as a blank panel that can be customized by the builder. [3] [4]
In July 2020 Van's introduced a new version of the Lycoming IO-390, designated as the IO-390-EXP119 and optimized for the RV-14. The engine has new exhaust and induction systems and puts out 215 hp (160 kW). It has a revised oil sump, aluminum induction pipes, oil pump and accessory case that saves 10 lb (5 kg) of weight. With this powerplant the RV-14 is 11 mph (18 km/h) faster in cruise speed and climbs 250 ft/min (1.27 m/s) faster. [5]
The manufacturer offers aircraft type transition training and has built an RV-14 for this purpose. [4]
Data from AVweb, KitPlanes and manufacturer [3] [4] [7]
General characteristics
Performance
The Beechcraft Musketeer is a family of single-engined, low-wing, light aircraft that was produced by Beechcraft. The line includes the Model 19 Musketeer Sport, the Model 23 Musketeer, Custom and Sundowner, the Model 23-24 Musketeer Super III, the retractable gear Model 24R Sierra and the military CT-134 Musketeer.
The Van's RV-4 is an American light homebuilt aircraft supplied in kit form by Van's Aircraft of Aurora, Oregon. It seats two people in a tandem seating configuration with the pilot accommodated in the front seat.
The Van's Aircraft RV-10 is a four-seat, single-engine, low-wing homebuilt airplane sold in kit form by Van's Aircraft. It is the first four-seat airplane in the popular RV series. The RV-10 first flew on 29 May 2003, and the first kit parts were delivered to a customer in September 2003.
The Van's RV-7 and RV-7A are two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft. The RV-7 is the tail-wheel equipped version, while the RV-7A features a nose-wheel.
The Van's RV-8 is a tandem two-seat, single-engine, low-wing homebuilt aircraft sold in kit form by Van's Aircraft. The RV-8 is equipped with conventional landing gear, while the RV-8A version features tricycle landing gear. The design is similar to the earlier RV-4, although it is larger than that earlier model.
The Van's RV-9 and RV-9A are American two-seat, single-engine, low-wing homebuilt airplanes sold in kit form by Van's Aircraft of Aurora, Oregon. The RV-9 is the tail-wheel equipped version while the RV-9A features a nose-wheel.
The Van's RV-3 is a single-seat, single-engine, low-wing kit aircraft sold by Van's Aircraft. Unlike many other aircraft in the RV line, the RV-3 is only available as a tail-wheel equipped aircraft, although it is possible that some may have been completed by builders as nose-wheel versions. The RV-3 is the genesis design for the rest of the RV series, all which strongly resemble the RV-3. The RV-4 was originally developed as a two-seat RV-3.
The Lancair Legacy, a modernized version of the Lancair 320, is a low-wing two-place retractable-gear composite monoplane manufactured by the American company Lancair. It is available as a kit that cost US$71,500 in 2011. There is also a fixed-gear version, the Legacy FG. The retractable version of the Legacy cruises at 276 mph at 8,000 ft and the fixed gear version cruises at 215 mph.
The Peña Bilouis is a French aerobatic amateur-built aircraft that was designed by the competitive aerobatic pilot Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.
The Raven 2XS is a Canadian aerobatic amateur-built biplane, designed and produced by Raven Aircraft of Surrey, British Columbia. The aircraft is supplied as a kit or as plans for amateur construction.
The XtremeAir Sbach 300 is a German aerobatic aircraft, designed by Philippe Steinbach and produced by XtremeAir, of Cochstedt. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Speedtwin E2E Comet 1, originally named the Phillips ST1 Speedtwin, is a two-seat, twin engined aircraft designed in the UK to be capable of aerobatics and the only civil twin certified for intentional spinning. After a long development time, just two have been built.
The Aircraft Technologies Acro 1 is an American aerobatic homebuilt aircraft that was designed by Fred Meyer and produced by Aircraft Technologies of Lilburn, Georgia. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. Neither plans nor kits are available anymore and the aircraft is out of production.
The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.
The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Tech Aero TR 200 is a French homebuilt aerobatic aircraft that was designed and produced by Tech Aero of Glisolles, first flown in August 1988. When it was available the aircraft was supplied as a kit for amateur construction.
The CubCrafters CC19 XCub is an American light aircraft, designed and produced by Cub Crafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.
The Murphy Yukon is a Canadian amateur-built aircraft, produced by Murphy Aircraft of Chilliwack, British Columbia, introduced at the AirVenture show in 2007. The aircraft is supplied as a kit for amateur construction.
The Lancair Barracuda is an American amateur-built aircraft produced by Lancair of Uvalde, Texas. It was introduced at AirVenture in July 2018. The aircraft is supplied as a kit for amateur construction.
The Whisper X350 Generation II is a South African amateur-built aircraft, designed in 2015 and produced by Whisper Aircraft of Mossel Bay. The aircraft was developed from the 2004-designed Whisper Aircraft Whisper motorglider. The X350 Generation II is supplied as a kit for amateur construction.