Overview | |
---|---|
Locale | Lancashire |
Dates of operation | 29 May 1830–22 May 1834 |
Successors | |
Technical | |
Track gauge | 4 ft 8+1⁄2 in (1,435 mm) standard gauge |
The Wigan Branch Railway was a short-lived early British railway company, formed in 1830 and operating from 1832 to 1834 in Lancashire. It was constructed to link Wigan and the surrounding coalfield to the Liverpool and Manchester Railway (L&MR). It was involved in the first parliamentary approved amalgamation of railways to become part of the North Union Railway. Most of the line eventually became part of the West Coast Main Line (WCML).
Wigan was situated on the Leeds and Liverpool Canal which ran to Liverpool on the west coast, to Yorkshire across the Pennines, and to the east a branch ran to Leigh where it made a connection with the Bridgewater Canal linking it with the rest of the canal network and in particular Manchester. [1]
The canals of the time were the major freight routes being faster and able to transport greater loads than the carriers using the turnpike road system. But, unfortunately, these canal routes were slow, becoming congested, and increasingly more expensive as demand from the rapidly expanding businesses in the area increased. [2] The waterways had a virtual monopoly on the transport links which enabled them to charge exorbitant tolls. [3] Even with the demand the canals were not always able to provide the desired service, for example in February 1830 there was a severe frost which closed them and coal had to be carted into Liverpool at nearly twice the cost. [4]
The area around Wigan had seen a stimulus in trade, and especially in coal mining, since the opening of the Leeds and Liverpool Canal in 1816. By the late 1820s local businesses considered themselves disadvantaged by the canal monopoly on transport, local newspapers reported the proposed railway as being shorter to both Liverpool and Manchester and should counteract the injurious influence of the charges to use the canal. [5]
They looked to the railway to break this monopoly, the canal companies recognised this threat to their business early on, for example, the Leeds and Liverpool canal company minutes of 21 September 1822 mention the issue, and the canal businesses started to take steps to protect their interests. [3]
Rail roads, tramroads and railways had been around for some time, mainly used to transport goods, especially coal to the canal network. There was already at least one private railway operating in the area, in 1812 Robert Daglish had constructed a railway to carry coal from Orrell Colliery in Winstanley, near Wigan to the Leeds and Liverpool Canal, this railway used "Blenkinsop and Murrays" patent cog and rack steam locomotives to haul the coal wagons. [6] A little further north the Lancaster Canal had been built in two sections joined in 1797 by a five mile long tramroad. [7]
The railway as planned was 13 miles shorter than the canal route to Liverpool, and one mile shorter to Manchester. [8] There was only one level crossing on the line, at Golborne Gates where the Warrington to Wigan turnpike crossed the railway. [9]
Preliminary surveys had been completed in 1829, [10] followed by an initial public meeting held in Wigan on 7 November that was reported by a Liverpool newspaper: [lower-alpha 1] [12]
Wigan Railway.-On Wednesday se'nnight a meeting of gentlemen favourable to the construction of a branch railroad, to connect Wigan and its neighbourhood with the Liverpool and Manchester railway, was held at the Eagle and Child Inn, in Wigan, at which Ralph Thicknesse, Esq. presided, and at which a variety of resolutions were passed. The substance of these was, that a line of road then and there suggested by Mr. Vignoles, the engineer, which includes a branch to join the Lancaster Canal, should be adopted; that notice should be given of the company's intention to apply next session for an Act of Parliament to carry the object into effect; that £60,000 should be the capital of the company, and not £40,000 as at first proposed; and that a committee be appointed at the next meeting (which was to take place yesterday) to conduct the company's affairs. In conclusion, R. Greenough, Esq. was called to the chair, and the thanks of the meeting were given to the Mr. Thicknesse for his able conduct in the chair. [lower-alpha 2]
The Wigan Branch Railway obtained an Act of Parliament on 29 May 1830 to build a 6 miles 47 chains (10.6 km) line from the Liverpool and Manchester Railway (L&MR) near Parkside to Wigan. [lower-alpha 3] The Act included a 2 miles 54 chains (4.3 km) branch, the Springs branch, with connections to collieries in the district. [act 1] [15] [16] [17]
The line was promoted by 19 sponsors who were mainly Wigan-area coal merchants and colliery owners. They wanted a cheaper and faster way to get their coal to Liverpool and Manchester than using the canals. [lower-alpha 4] [18] Ralph Thicknesse was elected as the first chairman. [act 1] [10] Other original prominent shareholders were Edward Cropper, a Liverpool businessman and shareholder of the L&MR; and James Chapman also a shareholder in the L&MR, Chapman was appointed treasurer, secretary and general superintendent of the WBR in June 1830. After the first year Theodore Woolman Rathbone, also a shareholder of the L&MR, became a shareholder and director and at the following general meeting he was elected chairman. [19]
The line as planned would have had multiple connections at the southern end where it connected to the L&MR at Parkside, the plans show that it was intended to have east and west facing curves and a spur to Parkside station arriving at right angles. The Springs branch was also intended to make both north and south facing junctions with the main line. [20] There were no intermediate stations planned and the northern terminus was situated at Chapel Lane in Wigan. [21]
Parkside area 1832 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
In June 1830 Charles Vignoles was appointed engineer. He was familiar with the area having been involved with surveying the L&MR. [lower-alpha 5] [10] [11]
The line was constructed by contractors Pritchard & Hoof who were also awarded a two-year maintenance contract. The contract was not a success and they were relieved of the maintenance element before the end of the contractual period resulting in legal action that the contractors won. [8]
The intention had been to construct a double track railway but money was in short supply and economies were made resulting in only the main line being constructed, it was engineered with enough space for a double track but only a single track was laid, with three passing loops per mile and only the east facing curve was provided at Parkside. [8] [23]
The line opened to traffic on 3 September 1832 without ceremony, the directors travelled in a separate carriage attached to the first train in each direction before dining together at Wigan. [24]
The Wigan Branch Railway did not hire its own staff or provide motive power and rolling stock. Instead the line was worked under contract by the L&MR who provided a locomotive and a few coaches for passengers to run thrice daily each way between Parkside and Wigan. [lower-alpha 6] The L&MR agreed to provide porters to turn the coaches at Parkside and the WBR was to provide a guard for each train, the establishment at Wigan, make all the bookings and collect the fares for passengers and parcels at Wigan, the receipts were to be apportioned according to a formula that took account of the relative use of each line, fares were set at 5s for first class and 3s 6d for second class for any journey between Wigan and Liverpool or Manchester. [9]
As the line was operated under contract by the L&MR it likely followed L&MR practices. On the L&MR intermediate stopping places were neither advertised nor provided with facilities, they were mostly situated at level crossings where a policeman or gateman was permanently on duty, passengers wishing to use the stopping place informed the staff who signalled the requirement to stop to the train crew. [27] [28] The WBR had one crossing on the level, at Golborne, 1 mile 72 chains (3.1 km) from Parkside, [29] where the Warrington to Wigan turnpike crossed the railway at a gated level crossing known as Golborne Gates and this would have been an identified stopping place on the line and therefore may have operated as a station in the same way as on the L&MR. [30]
There is no evidence that through carriages ran between Wigan and Liverpool or Manchester at this time, it appears that passengers had to change at Parkside where they walked between the trains. [24] [31] In October 1832 the WBR arranged for a glass coach to run from Parkside to Newton Junction to meet the morning first class trains from Liverpool and Manchester. [lower-alpha 7] [9]
The L&MR provided locomotives and wagons to convey freight between Wigan and Liverpool or Manchester at 5s per ton. [lower-alpha 8]
The railway announced in October 1832 that it would begin moving goods along the line and began construction of a warehouse at Wigan for this purpose. [9]
From opening some colliery owners ran their own trains on the line, Richard Evans had a connection to it to transport coal from his Edge Green Colliery. [34]
The construction of the Preston and Wigan Railway was authorised in 1831 but construction was delayed. The directors of the Wigan Branch Railway and Preston and Wigan Railway decided to merge and an Act of Parliament gained royal assent on 22 May 1834 incorporating the two merged railways as the North Union Railway. [act 2] [36]
The Liverpool and Manchester Railway (L&MR) was the first inter-city railway in the world. It opened on 15 September 1830 between the Lancashire towns of Liverpool and Manchester in England. It was also the first railway to rely exclusively on locomotives driven by steam power, with no horse-drawn traffic permitted at any time; the first to be entirely double track throughout its length; the first to have a true signalling system; the first to be fully timetabled; and the first to carry mail.
The Liverpool, St Helens and South Lancashire Railway, was formed in 1889, but no services ran until 1895 and then only freight. Passenger services did not start until 1900. It incorporated the St Helens and Wigan Junction Railway. It was taken over by the Great Central Railway in 1906.
The Ashton, Stalybridge and Liverpool Junction Railway was opened in 1846 to connect the industrial town of Ashton-under-Lyne to the developing railway network, and in particular to the port of Liverpool. It was a short line, joining the Manchester and Leeds Railway at Miles Platting and the connection to Liverpool was over that line and the Liverpool and Manchester Railway.
The Bolton and Leigh Railway (B&LR) was the first public railway in Lancashire. It opened for goods on 1 August 1828, and thus preceded the Liverpool and Manchester Railway (L&MR) by two years. Passengers were carried from 1831. The railway operated independently until 1845 when it became part of the Grand Junction Railway.
The Warrington and Newton Railway was a short early railway linking Warrington to the Liverpool and Manchester Railway at Newton, and to pits at Haydock, nearby. It opened in 1831.
The North Union Railway was an early British railway company, operating two main routes, from Parkside to Preston and from Bolton Trinity Street to Preston, all in Lancashire. The northerly part of the routes sharing the line from Euxton to Preston.
Wigan North Western railway station is one of two railway stations serving the town centre of Wigan, Greater Manchester, England.
The railway system in Wigan started development in the 19th century during the Industrial Revolution. The first railway built in the town was the Wigan Branch Railway which was opened on 3 September 1832 to serve the many collieries in the area; this was a branch line of the Liverpool and Manchester Railway, the first inter-city railway. By the turn of the 20th century, Wigan had numerous railway stations widely available across the borough, used by both freight and passengers. Many of the lines were originally built for freight which were later converted, as the owners saw the profitability of allowing passengers, to carry passenger trains.
The Tyldesley Loopline was part of the London and North Western Railway's Manchester and Wigan Railway line from Eccles to the junction west of Tyldesley station and its continuance south west via Bedford Leigh to Kenyon Junction on the Liverpool and Manchester Railway. The line opened on 1 September 1864 with stations at Worsley, Ellenbrook, Tyldesley, Leigh and Pennington before joining the Liverpool and Manchester Railway at Kenyon Junction.
The Lancashire Coalfield in North West England was an important British coalfield. Its coal seams were formed from the vegetation of tropical swampy forests in the Carboniferous period over 300 million years ago.
Boar's Head railway station served the southern part of the village of Standish.
The Bolton and Preston Railway (B&PR) connected Bolton and Preston, in Lancashire, England. Its authorising Act of Parliament forbade its early completion to protect the North Union Railway (NUR) and imposed other restrictions that limited the success of the B&PR. A change of route was authorised to bypass the delay making it dependent on the goodwill of the NUR to reach Preston. The NUR saw the B&PR as a competitor and used underhand tactics to harm the success of the B&PR.
Parkside railway station was an original station on the Liverpool and Manchester Railway. It then became the interchange station between lines when the Wigan Branch Railway opened in 1832, moving to the physical junction of the two lines in 1838. The station continued as an interchange until being by-passed in 1847 when a west curve was opened to facilitate north–south links that did not go through the station. Traffic declined further after the Winwick cut-off opened in 1864 leading to closure in 1878.
Golborne South railway station was one of two stations serving the town of Golborne, to the south of Wigan.
Lowton railway station served the village named Town of Lowton to the east of Newton-le-Willows and south of Golborne.
Bamfurlong railway station served the village of Bamfurlong part of Abram, to the south of Wigan.
The Kenyon and Leigh Junction Railway (K&LJR) was constructed to link the Bolton and Leigh Railway (B&LR), which terminated at the Leigh Branch of the Leeds and Liverpool Canal, with the Liverpool and Manchester Railway (L&MR) at Kenyon.
John Hargreaves JP was an English carrier, railway entrepreneur and manufacturing businessman. John and his father, also called John Hargreaves, were carriers in the north west of England at the time when railways were being built and taking business away from the canals.
Ralph Thicknesse was a British politician.
Wigan Chapel Lane railway station served the town of Wigan in Lancashire, England.
{{cite book}}
: CS1 maint: location missing publisher (link)