Burma Plate

Last updated
Burma Plate
BurmaPlate.png
Type Minor
Approximate area1,100,000 km2 [1]
Movement1north
Speed146 mm/year
Features Andaman Sea
1Relative to the African Plate
The Burma Plate, showing boundaries with the India Plate (the Sunda Trench) and the Sunda Plate (through the Andaman Sea) Neic slav fig72narrow.jpg
The Burma Plate, showing boundaries with the India Plate (the Sunda Trench) and the Sunda Plate (through the Andaman Sea)

The Burma Plate is a minor tectonic plate or microplate located in Southeast Asia, sometimes considered a part of the larger Eurasian Plate. The Andaman Islands, Nicobar Islands, and northwestern Sumatra are located on the plate. This island arc separates the Andaman Sea from the main Indian Ocean to the west.

Contents

To its east lies the Sunda Plate, from which it is separated along a transform boundary, running in a rough north-south line through the Andaman Sea. This boundary between the Burma and Sunda plates is a marginal seafloor spreading centre, which has led to the opening up of the Andaman Sea (from a southerly direction) by "pushing out" the Andaman-Nicobar-Sumatra island arc from mainland Asia, a process which began in earnest approximately 4 million years ago.

To the west is the much larger India Plate, which is subducting beneath the western facet of the Burma Plate. This extensive subduction zone has formed the Sunda Trench.

Tectonic history

In models of the reconstructed tectonic history of the area, the generally northwards movement of the Indo-Australian Plate resulted in its substantive collision with the Eurasian continent, which began during the Eocene epoch, approximately 50–55 million years ago (Ma). This collision with Asia began the orogenic uplift which has formed the Himalaya mountains, as well as the fracturing of the Indo-Australian plate into the modern Indian Plate, Australian Plate, and possibly Capricorn Plate. [2]

As the India Plate drifted northwards at a relatively rapid rate of an average 16 cm/yr, it also rotated in a counterclockwise direction. As a result of this movement and rotation, the convergence along the plate's eastern boundary (the Burma-Andaman-Malay region) with Eurasia was at an oblique angle.

The transform forces along this subduction front started the clockwise bending of the Sunda arc; in the late Oligocene (ca. 32 Ma) further faulting developed and the Burma and Sunda microplates began to "break off" from the larger Eurasian Plate.

After a further series of transform faulting, and the continuing subduction of the India Plate beneath the Burma Plate, backarc spreading saw the formation of the marginal basin and seafloor spreading centre which would become the Andaman Sea, a process well-underway by the mid-Pliocene (3–4 Ma).

Western Sunda Arc and Trench showing tectonic and seismic activity. Tectonics Sumatra quake.gif
Western Sunda Arc and Trench showing tectonic and seismic activity.

Recent tectonic activity

On December 26, 2004, a large portion of the boundary between the Burma Plate and the Indian Plate slipped, causing the 2004 Indian Ocean earthquake and tsunami. [3] This megathrust earthquake had an estimated moment magnitude of 9.1–9.3 Mw . [4] Over 1,600 kilometres (990 mi) of the boundary underwent thrust faulting and shifted up to 5 metres (16 ft) vertically and 11 metres (36 ft) horizontally. [4] This rapid rise in the sea floor over such a short time (seven minutes [4] ) generated a massive tsunami that killed approximately 229,800 people along the coast of the Indian Ocean.

Related Research Articles

<span class="mw-page-title-main">Andaman Sea</span> Marginal sea of the northeastern Indian Ocean

The Andaman Sea is a marginal sea of the northeastern Indian Ocean bounded by the coastlines of Myanmar and Thailand along the Gulf of Martaban and west side of the Malay Peninsula, and separated from the Bay of Bengal to its west by the Andaman Islands and the Nicobar Islands. Its southern end is at Breueh Island just north of Sumatra, with the Strait of Malacca further southeast.

<span class="mw-page-title-main">Convergent boundary</span> Region of active deformation between colliding tectonic plates

A convergent boundary is an area on Earth where two or more lithospheric plates collide. One plate eventually slides beneath the other, a process known as subduction. The subduction zone can be defined by a plane where many earthquakes occur, called the Wadati–Benioff zone. These collisions happen on scales of millions to tens of millions of years and can lead to volcanism, earthquakes, orogenesis, destruction of lithosphere, and deformation. Convergent boundaries occur between oceanic-oceanic lithosphere, oceanic-continental lithosphere, and continental-continental lithosphere. The geologic features related to convergent boundaries vary depending on crust types.

<span class="mw-page-title-main">Eurasian Plate</span> Tectonic plate which includes most of the continent of Eurasia

The Eurasian Plate is a tectonic plate that includes most of the continent of Eurasia, with the notable exceptions of the Indian subcontinent, the Arabian subcontinent and the area east of the Chersky Range in eastern Siberia. It also includes oceanic crust extending westward to the Mid-Atlantic Ridge and northward to the Gakkel Ridge.

<span class="mw-page-title-main">Juan de Fuca Plate</span> Small tectonic plate in the eastern North Pacific

The Juan de Fuca Plate is a small tectonic plate (microplate) generated from the Juan de Fuca Ridge that is subducting beneath the northerly portion of the western side of the North American Plate at the Cascadia subduction zone. It is named after the explorer of the same name. One of the smallest of Earth's tectonic plates, the Juan de Fuca Plate is a remnant part of the once-vast Farallon Plate, which is now largely subducted underneath the North American Plate.

<span class="mw-page-title-main">Nazca Plate</span> Oceanic tectonic plate in the eastern Pacific Ocean basin

The Nazca Plate or Nasca Plate, named after the Nazca region of southern Peru, is an oceanic tectonic plate in the eastern Pacific Ocean basin off the west coast of South America. The ongoing subduction, along the Peru–Chile Trench, of the Nazca Plate under the South American Plate is largely responsible for the Andean orogeny. The Nazca Plate is bounded on the west by the Pacific Plate and to the south by the Antarctic Plate through the East Pacific Rise and the Chile Rise respectively. The movement of the Nazca Plate over several hotspots has created some volcanic islands as well as east–west running seamount chains that subduct under South America. Nazca is a relatively young plate both in terms of the age of its rocks and its existence as an independent plate having been formed from the break-up of the Farallon Plate about 23 million years ago. The oldest rocks of the plate are about 50 million years old.

<span class="mw-page-title-main">Australian Plate</span> Major tectonic plate separated from Indo-Australian Plate about 3 million years ago

The Australian Plate is a major tectonic plate in the eastern and, largely, southern hemispheres. Originally a part of the ancient continent of Gondwana, Australia remained connected to India and Antarctica until approximately 100 million years ago when India broke away and began moving north. Australia and Antarctica had begun rifting by 96 million years ago and completely separated a while after this, some believing as recently as 45 million years ago, but most accepting presently that this had occurred by 60 million years ago.

<span class="mw-page-title-main">2004 Indian Ocean earthquake and tsunami</span> Earthquake and subsequent tsunami in the Indian Ocean

On 26 December 2004, at 07:58:53 local time (UTC+7), a major earthquake with a magnitude of 9.1–9.3 Mw struck with an epicentre off the west coast of northern Sumatra, Indonesia. The undersea megathrust earthquake, known by the scientific community as the Sumatra–Andaman earthquake, was caused by a rupture along the fault between the Burma Plate and the Indian Plate, and reached a Mercalli intensity up to IX in some areas.

Megathrust earthquakes occur at convergent plate boundaries, where one tectonic plate is forced underneath another. The earthquakes are caused by slip along the thrust fault that forms the contact between the two plates. These interplate earthquakes are the planet's most powerful, with moment magnitudes (Mw) that can exceed 9.0. Since 1900, all earthquakes of magnitude 9.0 or greater have been megathrust earthquakes.

<span class="mw-page-title-main">Okhotsk microplate</span> Minor tectonic plate in Asia

The Okhotsk microplate is a proposed minor tectonic plate covering the Kamchatka Peninsula, Magadan Oblast, and Sakhalin Island of Russia; Hokkaido, Kantō and Tōhoku regions of Japan; the Sea of Okhotsk, as well as the disputed Kuril Islands.

The Sunda Trench, earlier known as and sometimes still indicated as the Java Trench, is an oceanic trench located in the Indian Ocean near Sumatra, formed where the Australian-Capricorn plates subduct under a part of the Eurasian Plate. It is 3,200 kilometres (2,000 mi) long with a maximum depth of 7,290 metres. Its maximum depth is the deepest point in the Indian Ocean. The trench stretches from the Lesser Sunda Islands past Java, around the southern coast of Sumatra on to the Andaman Islands, and forms the boundary between Indo-Australian Plate and Eurasian plate. The trench is considered to be part of the Pacific Ring of Fire as well as one of a ring of oceanic trenches around the northern edges of the Australian Plate.

<span class="mw-page-title-main">Sunda Plate</span> Tectonic plate including Southeast Asia

The Sunda Plate is a minor tectonic plate straddling the Equator in the Eastern Hemisphere on which the majority of Southeast Asia is located.

<span class="mw-page-title-main">Great Sumatran fault</span> Geological feature

The Indonesian island of Sumatra is located in a highly seismic area of the world. In addition to the subduction zone off the west coast of the island, Sumatra also has a large strike-slip fault, the Great Sumatran Fault also known as Semangko Fault, running the entire length of the island. This fault zone accommodates most of the strike-slip motion associated with the oblique convergence between the Indo-Australian and Eurasian plates. The fault ends in the north just below the city of Banda Aceh, which was devastated in the 2004 Indian Ocean earthquake. After the December 2004 earthquake, pressure on the Great Sumatran Fault has increased tremendously, especially in the north.

<span class="mw-page-title-main">Geology of Indonesia</span> Overview of the geology of Indonesia

This is a brief summary of the geology of Indonesia. Indonesia is located between two major tectonic plates, the Australian Plate and the newly-separated Sunda Plate.

<span class="mw-page-title-main">Aegean Sea Plate</span> A small tectonic plate in the eastern Mediterranean Sea

The Aegean Sea Plate is a small tectonic plate located in the eastern Mediterranean Sea under southern Greece and western Turkey. Its southern edge is the Hellenic subduction zone south of Crete, where the African Plate is being swept under the Aegean Sea Plate. Its northern margin is a divergent boundary with the Eurasian Plate.

This is a list of articles related to plate tectonics and tectonic plates.

<span class="mw-page-title-main">Sunda megathrust</span> Geological feature

The Sunda megathrust is a fault that extends approximately 5,500 km (3300 mi) from Myanmar (Burma) in the north, running along the southwestern side of Sumatra, to the south of Java and Bali before terminating near Australia. It is a megathrust, located at a convergent plate boundary where it forms the interface between the overriding Eurasian plate and the subducting Indo-Australian plate. It is one of the most seismogenic structures on Earth, being responsible for many great and giant earthquakes, including the 2004 Indian Ocean earthquake and tsunami that killed over 227,000 people. The Sunda megathrust can be divided into the Andaman Megathrust, Sumatra(n) Megathrust and Java(n) Megathrust. The Bali-Sumbawa segment is much less active and therefore does not have the "megathrust" term associated with it.

The 1881 Nicobar Islands earthquake occurred at about 07:49 local time on 31 December, with an epicentre beneath Car Nicobar. It occurred as two separate ruptures, the largest of which had an estimated magnitude of 7.9 on the moment magnitude scale and triggered a tsunami that was observed around the Bay of Bengal. It is probably the earliest earthquake for which rupture parameters have been estimated instrumentally.

Seismicity of the Sumatran coast identifies and describes the seismic activity of an area of western Indonesia near the island of Sumatra. Seismicity refers to the frequency, type and size of earthquakes experienced over a period of time. The Sumatran coast is in the subduction zone where the Indian plate meets the Burma plate beneath the Andaman Sea, forming the northern part of the Sunda trench. The shallow seismicity is characteristically distributed across a wide area of plate movement. The Sunda trench is also closely related to the Sumatran Fault, a transform fault running the entire length of the island.

The Sumatra Trench is a part of the Sunda Trench or Java Trench. The Sunda subduction zone is located in the east part of Indian Ocean, and is about 300 km (190 mi) from the southwest coast of Sumatra and Java islands. It extends over 5,000 km (3,100 mi) long, starting from Myanmar in the northwest and ending at Sumba Island in the southeast.

<span class="mw-page-title-main">Geology of Myanmar</span>

The geology of Myanmar is shaped by dramatic, ongoing tectonic processes controlled by shifting tectonic components as the Indian plate slides northwards and towards Southeast Asia. Myanmar spans across parts of three tectonic plates separated by north-trending faults. To the west, a highly oblique subduction zone separates the offshore Indian plate from the Burma microplate, which underlies most of the country. In the center-east of Myanmar, a right lateral strike slip fault extends from south to north across more than 1,000 km (620 mi). These tectonic zones are responsible for large earthquakes in the region. The India-Eurasia plate collision which initiated in the Eocene provides the last geological pieces of Myanmar, and thus Myanmar preserves a more extensive Cenozoic geological record as compared to records of the Mesozoic and Paleozoic eras. Myanmar is physiographically divided into three regions: the Indo-Burman Range, Myanmar Central Belt and the Shan Plateau; these all display an arcuate shape bulging westwards. The varying regional tectonic settings of Myanmar not only give rise to disparate regional features, but they also foster the formation of petroleum basins and a diverse mix of mineral resources.

References

  1. "Sizes of Tectonic or Lithospheric Plates". Geology.about.com. 2014-03-05. Archived from the original on 2016-06-05. Retrieved 2016-02-02.
  2. Gordon, Richard G. (2009-03-01). "Lithospheric Deformation in the equatorial Indian Ocean: Timing and Tibet". Geology. 37 (3): 287–288. Bibcode:2009Geo....37..287G. doi:10.1130/focus032009.1.
  3. "Thirty-eight Indian cities in high-risk earthquake zones". The Times of India .
  4. 1 2 3 Strand, Carl; John Masek (2008). Sumatra-Andaman Islands earthquake and tsunami of December 26, 2004 : lifeline performance. Reston, Va.: American Society of Civil Engineers. doi:10.1061/9780784409510. ISBN   9780784409510.

Further reading